tobi/M7350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
46ba6f09ec
M7350/kernel/Documentation/arm/msm/msm_smem.txt
T f75098198c M7350v5_en_gpl
2024-09-09 08:57:42 +00:00

596 lines
26 KiB
Plaintext
Raw Blame History

Introduction
============
The Shared Memory (SMEM) protocol allows multiple processors in Qualcomm
Technologies, Inc. MSM System on Chips to communicate at a low level using a
segment of shared system memory that is accessible by any of the processors.
This is accomplished by an operating-system independent mechanism that allows a
client on any processor to dynamically allocate a block of memory from shared
system memory which is then visible and accessible to clients on other
processors for the purpose of storing and exchanging data.
+-------------+
SMEM | Processor 1 |
+---------+ +------------+ +-------------+
| |+--------------->| Item 1 |<----------------+ ^
| Linux | | | |
| |<---------------+| |+-------------------+
+---------+ +------------+
^ + | Item 2 | +-------------+
| | | |<--------------+| Processor 2 |
| | | |+-------------->| |
| | | | +-------------+
| | | |
| | | | +-------------+
| | +------------+ | Processor 3 |
| | . +-------------+
| | . + ^ .
| | +------------+ | | .
| +----------------->| Item N |<-----------------+ | .
+---------------------+| |+--------------------+ .
| | +-------------+
| |+-------------->| |
| | | Processor N |
| |<--------------+| |
+------------+ +-------------+
The SMEM driver supports all known versions of the SMEM protocol.
Hardware description
====================
The SMEM protocol requires a contiguous segment of system memory that is
accessible by both the local processor and one or more remote processors.
Each processor supporting the SMEM protocol must configure their MMUs and other
applicable hardware such that accesses to shared memory are non-cacheable.
Optionally, additional segments of system memory may be provided to act as
auxiliary memory areas for the SMEM protocol. Such segments may provide
performance benefits to certain processors by optimizing access latency. Such
auxiliary memory areas must be a slave to the single main SMEM area.
While the SMEM protocol has provisions for software-based remote spinlocks to
manage synchronization between processors, this functionality may be
substituted with dedicated hardware. Such hardware is expected to be managed
by another driver providing a standardized API.
Software description
====================
At its core, the SMEM protocol is a heap memory management system. The core
functionality consists of allocating segments of memory, and lookup operations
to find the address of existing segments of memory. There is no provision to
free memory that is allocated.
Allocated segments of memory are called SMEM items. Each SMEM item has a unique
32-bit identifier which maps each specific SMEM item to a slot in the table of
contents that lives at the start of the SMEM region.
A SMEM client that wishes to allocate a SMEM item will provide the item
identifier and a desired size in bytes. Assuming there is enough free space in
the SMEM region to accommodate the request, the amount of desired bytes will be
carved out, and the base address and size for the item will be stored in the
table of contents. The base address will be returned as a pointer to the
client, so that the client may use the SMEM item as if it were normal memory
allocated through "malloc".
A SMEM client that wishes to find an already allocated SMEM item will provide
the item identifier and the size in bytes that the client expects for the item.
A lookup in the table of contents for the specified item identifier will be
performed. Assuming a matching SMEM item is found, the size of the item that
is stored in the table of contents will be compared to the size specified by the
client. This sanity check of the expected vs actual size is done to ensure that
all users of a particular SMEM item agree on the size of the data to be
exchanged under the assumption that if the users do not agree on the item size,
then they will not be able to sucessfully communicate as one or more sides may
view a corruption of the data stored in the SMEM item. Assuming the sizes
match, the virtual address corresponding to the base address stored in the table
of contents for the item will be returned to the client.
+------+ Request +-----------+ Memory
|Client|+----------------->|SMEM Driver| +---------------+
+------+ Item X of size Y +-----------+ | |
^ + | |
| | Lookup/Alloc +---------------+ Find X
| +--------------->| TOC[X] |+--------+
| +---------------+ |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| Return pointer for client +---------------+ |
+---------------------------------------------+| Item X |<--------+
+---------------+
| |
| |
| |
+---------------+
The SMEM driver depends on the kernel memory management subsystem for managing
the system memory that SMEM uses. The main SMEM memory region is statically
mapped at boot, and the virtual address for the base of the region is stored
in MSM_SHARED_RAM_BASE. Auxiliary memory regions are ioremap'd at driver init.
All SMEM regions are mapped as non-cacheable.
Although the SMEM driver is aware of auxiliary memory regions, and capable of
understanding SMEM items that exist in auxiliary memory regions, the SMEM
driver does not allocate from the auxiliary memory regions. A detailed
description of the purpose and use of auxiliary memory regions is outside the
scope of this document.
Design
======
The SMEM protocol requires that the system bootloader initialize (zero out) and
bootstrap the main SMEM region before any processor in the system has booted to
avoid an initialization race condition.
SMEM regions are configured as non-cachable memory. While this results in a
small performance hit, it significantly reduces the complexity for the SMEM
driver and clients in terms of cache management and memory barriers. Clients
are generally able to treat their SMEM items like regular local memory, which
eases the requirements to write correct code.
The unsigned data type is assumed to be an unsigned 32-bit integer value.
The root structure at the base of the main SMEM region is:
#define SMD_HEAP_SIZE 512
struct smem_shared {
struct smem_proc_comm proc_comm[4];
unsigned version[32];
struct smem_heap_info heap_info;
struct smem_heap_entry heap_toc[SMD_HEAP_SIZE];
};
This structure and its fields are initialized by the bootloader.
The proc_comm field is reserved as the first part of the SMEM region to maintain
compatibility with legacy systems, but is otherwise deprecated. While the
proc comm driver is beyond the scope of this document, the remaining structure
definition to fully define smem_shared is:
struct smem_proc_comm {
unsigned command;
unsigned status;
unsigned data1;
unsigned data2;
};
The version field of the smem_shared struct is an array of version entries
specifying the SMEM protocol version of every supporting processor active in the
system. Each unsigned value in the array corresponds to one entry. This
provides a mechanism for ensuring protocol version compatability between
processors. While the full table of assigned and reserved entries in the array
is beyond the scope of this document, index 8 (smem_shared.version[8]) is
reserved for any future use by Linux. The bootloader always initializes it's
entry (index 7, or smem_shared.version[7]) to the SMEM protocol version
supported by the bootloader. Checking the value of the bootloader's entry can
be used as a sanity check to determine if the SMEM region was sucessfully
initialized.
The heap_info field of smem_shared contains basic information of the SMEM heap.
The bootloader fills in values corresponding to the main SMEM region when it
initializes the heap. It is defined as:
struct smem_heap_info {
unsigned initialized;
unsigned free_offset;
unsigned heap_remaining;
unsigned reserved;
};
The initialized field is set to 1 by the bootloader when it initializes the
heap. The free_offset field contains the offset from the base of the SMEM
region for the first free byte in the heap. When a new SMEM item is allocated,
free_offset is incremented by the size of the allocated item. SMEM item sizes
are 8-byte aligned. The heap_remaining field contains the number of free bytes
remaining in the heap. When a new SMEM item is allocated, heap_remaining is
decremented by the size of the item. The reserved field is defined to be 0.
The heap_toc field of smem_shared is the heap table of contents. It is an array
containing a slot for every defined SMEM item. SMEM item identifiers index into
this array. The structures definition is:
struct smem_heap_entry {
unsigned allocated;
unsigned offset;
unsigned size;
unsigned reserved; /* bits 1:0 reserved, bits 31:2 aux smem base addr */
};
If an SMEM item is allocated, the allocated field is 1. The offset field is
either the offset from the main SMEM region base where this SMEM item exists, or
the offset from the auxiliary SMEM region base specified in the reserved field.
The size field contains the size of the SMEM item in bytes. The size is defined
to be 8-byte aligned. The reserved field is 0 if the SMEM item is located in
the main SMEM region, or bits 31(MSB) to 2 specify the physical address of the
auxiliary SMEM region where the SMEM item resides. If reserved is used as a
physical address, then the address must be 4-byte aligned per ARM architectural
requirements.
The bootloader allocates and intializes the following SMEM items:
Name ID Size (bytes)
----------------------------------------------------
SMEM_PROC_COMM 0 64
SMEM_HEAP_INFO 1 16
SMEM_ALLOCATION_TABLE 2 8192
SMEM_VERSION_INFO 3 128
SMEM_HW_RESET_DETECT 4 8
SMEM_AARM_WARM_BOOT 5 4
SMEM_DIAG_ERR_MESSAGE 6 200
SMEM_SPINLOCK_ARRAY 7 32
SMEM_MEMORY_BARRIER_LOCATION 8 4
All other SMEM items are dynamically allocated by processors in the system.
Although the SMEM protocol requires the bootloader to initialize the SMEM region
before any processor in the system is active, early development of new systems
do not always have a fully functional bootloader. To determine if the
bootloader initialized the main SMEM region properly, the SMEM driver will check
the expected values of smem_shared.heap_info.initialized,
smem_shared.heap_info.reserved, and the bootloader entry of the
SMEM_VERSION_INFO SMEM item. If this check fails, the SMEM driver will print
an error message to the kernel log, and enter a disabled state.
Security Feature
----------------
The SMEM protocol supports an optional security feature that segments the main
SMEM region into multiple partitions. Each partition becomes a unique item
namespace. Access to partitions is restricted to a maximum of two processors
and enforced by Memory Protection Units (MPUs). The exceptions to this are the
Partition Table of Contents partition, which is read-only accessible by all
processors, and the Legacy/Default partition, which is freely accessible by all
processors.
+-------------------------+ SMEM Base address
|Legacy/Default |
|SMEM Partition |
+-------------------------+
|SMEM Partition 0 |
|Processor 1 - Processor 2|
+-------------------------+
|SMEM Partition 1 |
|Processor 1 - Processor 3|
+-------------------------+
|SMEM Partition 2 |
|Processor 4 - Processor 5|
+-------------------------+
.
.
.
+-------------------------+
|SMEM Partition N |
|Processor N - Processor M|
+-------------------------+ SMEM Base address + SMEM size - 4k
|Table of Contents |
| |
+-------------------------+ SMEM Base address + SMEM size
SMEM items which are point-to-point in nature and accessed by two or fewer
processors may be allocated from a partition that is restricted to those
processors. SMEM items which are non-sensitive, accessed by 3 or more
processors, and/or do not correspond to a secured partition are allocated from
the Legacy/Default partition.
During the firmware boot process, the Table of Contents is initialized with a
description of all the secured partitions. Each secured partition is also
initialized. The required MPU settings to protect the Table of Contents and the
secured partitions are also established. The Table of Contents is located 4k
bytes prior to the end of the main SMEM region so that it is in a known position
for all processors to find and do local configuration.
The Table of Contents is defined as:
struct smem_toc {
/*
* Identifier is a constant for use in debugging and identifying this
* struct in a binary capture. Set to 0x434f5424 ("$TOC").
*/
uint32_t identifier;
/* Version number */
uint32_t version;
/* Number of entries in the table */
uint32_t num_entries;
uint32_t reserved[5];
/* Zero or more entries follow */
struct smem_toc_entry entry[];
};
Each entry in the Table of Contents is defined as:
struct smem_toc_entry {
/* Offset in bytes from SMEM base of the region */
uint32_t offset;
/* Size in bytes of the region */
uint32_t size;
/* Flags for this region */
uint32_t flags;
/*
* IDs for the 2 subsystems which have access to this partition.
* Order does not matter.
* For the entry which describes the TOC itself, these are both set to
* SMEM_INVALID_HOST.
* Use uint16_t, rather than enum type, to ensure size.
*/
uint16_t host0;
uint16_t host1;
/*
* Lowest common multiple of cacheline sizes for both endpoints. For
* example, if host0 has cacheline size of 32 and host1 has cacheline
* size of 64, this value is set to 64.
*/
uint32_t size_cacheline;
uint32_t reserved[3];
/*
* Sizes of sub ranges that are part of the region, but are excluded
* from the SMEM heap. These are allocated from the end of the region
* starting with sizes[0]. Set to 0 when not used.
*/
uint32_t exclusion_sizes[SMEM_TOC_MAX_EXCLUSIONS];
};
While the Legacy/Default partition maintains the structure and format of the
main SMEM region with the security feature disabled, the secured partitions have
a different format and structure:
+--------------+ +--------------------------+ Partition Base Address
| | | Partition Header |
| | | | +
| Uncached Page| +--------------------------+ |
| | | Item A Header | |
| | +--------------------------+ |
| | | Item A Data | |
+--------------+ | | |
| | | | |
| | +--------------------------+ |
| Uncached Page| | Item B Header | |Direction of heap growth
| | +--------------------------+ |
| | | Item B Data | |
| | | | |
+--------------+ | | |
| | +--------------------------+ |
| | | | |
| Uncached Page| | Unused Heap | |
| | | space to | v
| | | page boundry |
| | | |
+--------------+ +--------------------------+<----------+ End of heap
. . . . . .
Free Space
Can be used for
either heap.
. . . . . .
+--------------+ +--------------------------+<----------+ End of heap
| | | |
| | | Unused Heap |
| Cached Page | | space to | ^
| | | page boundry | |
| | +--------------------------+ |
| | | Item Y Data | |
+--------------+ | | |
| | +--------------------------+ |
| | | Item Y Header | |
| Cached Page | +--------------------------+ |
| | | Item Y Header Padding | |Direction of heap growth
| | +--------------------------+ |
| | | Item Z Data | |
+--------------+ | | |
| | | | |
| | | | |
| Cached Page | +--------------------------+ |
| | | Item Z Header | |
| | +--------------------------+ + Padding is here to ensure
| | | Item Z Header Padding | the the data buffer start
+--------------+ +--------------------------+ and end addresses are
| | aligned to cachelines for
| | Exclusion Range both endpoints.
| Uncached Page|. . . Free Space . . .
| | +--------------------------+
| | | Exclusion Ranges 0..N |
| | | |
+--------------+ +--------------------------+ Partition Base Address + size
The design of the secured partitions has two advantages over the Legacy/Default
Partition
1. Using a linked list instead of a static array to track allocated SMEM
items maximizes space utilization
2. Creating two heaps allows one to be cacheline aligned, thus providing
an option for a higher level of performance to clients (requires
client to specify they want their SMEM item allocated in the
cached area)
The partition header struct is defined as:
struct smem_partition_header {
/* Identifier magic number - 0x54525024 ("$PRT") */
uint32_t identifier;
/*
* IDs for the 2 subsystems which have access to this partition.
* Order does not matter.
* Use uint16_t, rather than enum type, to ensure size.
*/
uint16_t host0;
uint16_t host1;
/* Partition size, in bytes, not including the exclusion ranges */
uint32_t size;
/* Offset of the byte following the last allocation in uncached heap */
uint32_t offset_free_uncached;
/* Offset of the byte following the last allocation in cached heap */
uint32_t offset_free_cached;
uint32_t reserved[3];
};
The allocated SMEM item header struct is defined as:
struct smem_partition_allocation_header {
/* 0xa5a5 canary value to detect overrun problems */
uint16_t canary;
/* SMEM item ID. Use uint16_t here, rather than enum, to ensure size. */
uint16_t smem_id;
/* Size of the allocated item, includes any necessary padding. */
uint32_t size;
/* Size of the data padding for cacheline alignment, if applicable */
uint16_t data_padding;
/* Size of the header padding for cacheline alignment, if applicable */
uint16_t header_padding;
uint32_t reserved[1];
};
SMP/multi-core
==============
The SMEM driver expects a remote spinlock driver to provide inter-processor
synchronization primitives which not only provide locking between multiple cores
but locking between multiple processors to protect the state of structures
stored in SMEM regions during allocation and lookup. Once a pointer to a SMEM
item is returned to a client, that client is expected to provide all the
necessary locking and other synchronization as required.
The remote spinlocks may make use of the SMEM_SPINLOCK_ARRAY SMEM item (typical
of legacy systems).
SMEM regions are non-cachable to maintain a consistent state of the data
throughout all operations. This simplifies cache management and memory barrier
requirements to a few key points in the SMEM item allocation process, and allows
clients to treat SMEM items like local memory once allocated.
Security
========
SMEM by default provides no security of SMEM items. If a SMEM item is intended
to only be used between clients on processors A and B, malicious clients on
processor C are free to sniff or inject data into the SMEM item.
An optional security feature may be enabled that makes use of Memory Protection
Units (MPUs) to limit access of special segments of the main SMEM region.
Access to these partitions is limited to two processors, so only point-to-point
traffic (such as SMD or SMP2P) is able to be protected. Auxiliary SMEM regions
are not protected under this feature. Support for this feature is activated by
a Device Tree property.
Performance
===========
Some client use cases such as SMD may benefit from caching, but that places an
additional burden of cache maintenance and protocol design onto the clients.
Interface
=========
Kernel-space APIs:
/**
* smem_alloc() - Find an existing item, otherwise allocate it with security
* support
*
* @id: ID of SMEM item
* @size_in: Size of the SMEM item
* @to_proc: SMEM host that shares the item with apps
* @flags: Item attribute flags
* @returns: Pointer to SMEM item, NULL if it couldn't be found/allocated, or
* -EPROBE_DEFER if the driver is not ready
*/
void *smem_alloc(unsigned id, unsigned size_in, unsigned to_proc,
unsigned flags);
/**
* smem_get_entry() - Get existing item with security support
*
* @id: ID of SMEM item
* @size: Pointer to size variable for storing the result
* @to_proc: SMEM host that shares the item with apps
* @flags: Item attribute flags
* @returns: Pointer to SMEM item, NULL if it doesn't exist, or -EPROBE_DEFER
* if the driver isn't ready
*/
void *smem_get_entry(unsigned id, unsigned *size, unsigned to_proc,
unsigned flags);
/**
* smem_get_entry_no_rlock() - Get existing item without using remote spinlock.
*
* @id: ID of SMEM item
* @size_out: Pointer to size variable for storing the result
* @to_proc: SMEM host that shares the item with apps
* @flags: Item attribute flags
* @returns: Pointer to SMEM item, NULL if it doesn't exist, or -EPROBE_DEFER
* if the driver isn't ready
*
* This function does not lock the remote spinlock and should only be used in
* failure-recover cases such as retrieving the subsystem failure reason during
* subsystem restart.
*/
void *smem_get_entry_no_rlock(unsigned id, unsigned *size_out, unsigned to_proc,
unsigned flags);
/**
* smem_find() - Find existing item with security support
*
* @id: ID of SMEM item
* @size_in: Size of the SMEM item
* @to_proc: SMEM host that shares the item with apps
* @flags: Item attribute flags
* @returns: Pointer to SMEM item, NULL if it doesn't exist, or -EPROBE_DEFER
* if the driver is not ready
*/
void *smem_find(unsigned id, unsigned size);
/**
* smem_virt_to_phys() - Convert SMEM address to physical address.
*
* @smem_address: Address of SMEM item (returned by smem_alloc(), etc)
* @returns: Physical address (or NULL if there is a failure)
*
* This function should only be used if an SMEM item needs to be handed
* off to a DMA engine. This function will not return a version of EPROBE_DEFER
* if the driver is not ready since the caller should obtain @smem_address from
* one of the other public APIs and get EPROBE_DEFER at that time, if
* applicable.
*/
phys_addr_t smem_virt_to_phys(void *smem_address);
Driver parameters
=================
Module parameters:
debug_mask - 0 for off (default), 1 for on.
Enables or disables printing debug messages to the kernel log
Config options
==============
Configuration of SMEM regions is done via Device Tree per the format in
Documentation/devicetree/bindings/arm/msm/smem.txt.
Dependencies
============
Drivers needed:
Remote spinlocks
Depends on the system bootloader to initialize the main SMEM region.
Known issues
============
None.
To do
=====
Convert use of the unsigned data type to well defined value such as uint32_t for
better portability.
Reference in New Issue View Git Blame Copy Permalink