Test: coresight
Usage: cs_test.sh [-n | --nominal] [-a | --adversarial] [-r | --repeatability]\
[-s | stress ]
Runs the tests for CoreSight trace drivers.
Options:
The following options can be used:
-n | --nominal nominal test, runs by default
-a | --adversarial adversarial test
-r | --repeatability iterations repeatability test, runs 10
iterations by default
-s | --stress stress test
--source trace_source trace source, supported
trace_source values are 'etm'
and 'stm'
Requirement:
CoreSight ETM and STM sources are initially disabled before running any test.
Description:
Nominal Test:
All CoreSight tests are invoked.
Adversarial Test:
Runs cs_adversary.sh. This test enables all trace sources, all ftrace events and
toggles the cpu cores on/off.
Repeatability Tests:
All test cases except probe test are invoked for user specified number of iterations,
or for 10 iterations by default.
Stress Test:
All test cases except probe test are invoked for 100 iterations.
Test case description:
1. platform/platform.sh
Tests that CoreSight trace drivers are probed without failures.
2. etm/etm_enable.sh
Tests ETM tracing gets properly enabled.
3. etm/etm_disable.sh
Tests ETM tracing get properly disabled.
4. stm/stm_enable.sh
Tests STM tracing gets properly enabled.
5. stm/stm_disable.sh
Tests STM tracing gets properly disabled.
6. stm/stm_etf_dump.sh
Tests ETF can be dumped with good data while STM is the only trace source. All ftrace,
hardware events are disabled while single string data is sent over STM. Once trailing
zeros of output file are truncated, size is compared with reference size for same
input data.
7. stm/stm_etr_dump.sh
Please refer to stm/stm_etf_dump.sh. Here ETR is the trace sink instead of ETM.
8. mult_trace/mult_source_enable.sh
Tests that multiple CoreSight trace sources (ETM and STM) can be successfully enabled
at the same time.
9. mult_trace/mult_source_disable.sh
Tests that multiple CoreSight trace sources (ETM and STM) can be successfully disabled
at the same time.
10. sink_switch/sinkswitch.sh
Tests that the device can switch between multiple CoreSight tracesinks. Assumes etf,
etr and tpiu sinks are present.
11. sink_switch/etr_modes.sh
Tests that the modes of ETR can be changed from usb to memory and vice versa.
12. cs_adversary.sh
While having trace sources enabled, enables and disables all cores in a loop.
Targets supported: 8974
Test output:
All tests prints:
"PASS: <message>" if the test case passes
or
"FAIL: <message>" otherwise
Note: Tests assume /data partition exists
