M7350/kernel/drivers/net/wireless/bcmdhd/include/spid.h
2024-09-09 08:52:07 +00:00

154 lines
6.0 KiB
C

/*
* SPI device spec header file
*
* Copyright (C) 2012, Broadcom Corporation
* All Rights Reserved.
*
* This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
* the contents of this file may not be disclosed to third parties, copied
* or duplicated in any form, in whole or in part, without the prior
* written permission of Broadcom Corporation.
*
* $Id: spid.h 241182 2011-02-17 21:50:03Z $
*/
#ifndef _SPI_H
#define _SPI_H
/*
* Brcm SPI Device Register Map.
*
*/
typedef volatile struct {
uint8 config; /* 0x00, len, endian, clock, speed, polarity, wakeup */
uint8 response_delay; /* 0x01, read response delay in bytes (corerev < 3) */
uint8 status_enable; /* 0x02, status-enable, intr with status, response_delay
* function selection, command/data error check
*/
uint8 reset_bp; /* 0x03, reset on wlan/bt backplane reset (corerev >= 1) */
uint16 intr_reg; /* 0x04, Intr status register */
uint16 intr_en_reg; /* 0x06, Intr mask register */
uint32 status_reg; /* 0x08, RO, Status bits of last spi transfer */
uint16 f1_info_reg; /* 0x0c, RO, enabled, ready for data transfer, blocksize */
uint16 f2_info_reg; /* 0x0e, RO, enabled, ready for data transfer, blocksize */
uint16 f3_info_reg; /* 0x10, RO, enabled, ready for data transfer, blocksize */
uint32 test_read; /* 0x14, RO 0xfeedbead signature */
uint32 test_rw; /* 0x18, RW */
uint8 resp_delay_f0; /* 0x1c, read resp delay bytes for F0 (corerev >= 3) */
uint8 resp_delay_f1; /* 0x1d, read resp delay bytes for F1 (corerev >= 3) */
uint8 resp_delay_f2; /* 0x1e, read resp delay bytes for F2 (corerev >= 3) */
uint8 resp_delay_f3; /* 0x1f, read resp delay bytes for F3 (corerev >= 3) */
} spi_regs_t;
/* SPI device register offsets */
#define SPID_CONFIG 0x00
#define SPID_RESPONSE_DELAY 0x01
#define SPID_STATUS_ENABLE 0x02
#define SPID_RESET_BP 0x03 /* (corerev >= 1) */
#define SPID_INTR_REG 0x04 /* 16 bits - Interrupt status */
#define SPID_INTR_EN_REG 0x06 /* 16 bits - Interrupt mask */
#define SPID_STATUS_REG 0x08 /* 32 bits */
#define SPID_F1_INFO_REG 0x0C /* 16 bits */
#define SPID_F2_INFO_REG 0x0E /* 16 bits */
#define SPID_F3_INFO_REG 0x10 /* 16 bits */
#define SPID_TEST_READ 0x14 /* 32 bits */
#define SPID_TEST_RW 0x18 /* 32 bits */
#define SPID_RESP_DELAY_F0 0x1c /* 8 bits (corerev >= 3) */
#define SPID_RESP_DELAY_F1 0x1d /* 8 bits (corerev >= 3) */
#define SPID_RESP_DELAY_F2 0x1e /* 8 bits (corerev >= 3) */
#define SPID_RESP_DELAY_F3 0x1f /* 8 bits (corerev >= 3) */
/* Bit masks for SPID_CONFIG device register */
#define WORD_LENGTH_32 0x1 /* 0/1 16/32 bit word length */
#define ENDIAN_BIG 0x2 /* 0/1 Little/Big Endian */
#define CLOCK_PHASE 0x4 /* 0/1 clock phase delay */
#define CLOCK_POLARITY 0x8 /* 0/1 Idle state clock polarity is low/high */
#define HIGH_SPEED_MODE 0x10 /* 1/0 High Speed mode / Normal mode */
#define INTR_POLARITY 0x20 /* 1/0 Interrupt active polarity is high/low */
#define WAKE_UP 0x80 /* 0/1 Wake-up command from Host to WLAN */
/* Bit mask for SPID_RESPONSE_DELAY device register */
#define RESPONSE_DELAY_MASK 0xFF /* Configurable rd response delay in multiples of 8 bits */
/* Bit mask for SPID_STATUS_ENABLE device register */
#define STATUS_ENABLE 0x1 /* 1/0 Status sent/not sent to host after read/write */
#define INTR_WITH_STATUS 0x2 /* 0/1 Do-not / do-interrupt if status is sent */
#define RESP_DELAY_ALL 0x4 /* Applicability of resp delay to F1 or all func's read */
#define DWORD_PKT_LEN_EN 0x8 /* Packet len denoted in dwords instead of bytes */
#define CMD_ERR_CHK_EN 0x20 /* Command error check enable */
#define DATA_ERR_CHK_EN 0x40 /* Data error check enable */
/* Bit mask for SPID_RESET_BP device register */
#define RESET_ON_WLAN_BP_RESET 0x4 /* enable reset for WLAN backplane */
#define RESET_ON_BT_BP_RESET 0x8 /* enable reset for BT backplane */
#define RESET_SPI 0x80 /* reset the above enabled logic */
/* Bit mask for SPID_INTR_REG device register */
#define DATA_UNAVAILABLE 0x0001 /* Requested data not available; Clear by writing a "1" */
#define F2_F3_FIFO_RD_UNDERFLOW 0x0002
#define F2_F3_FIFO_WR_OVERFLOW 0x0004
#define COMMAND_ERROR 0x0008 /* Cleared by writing 1 */
#define DATA_ERROR 0x0010 /* Cleared by writing 1 */
#define F2_PACKET_AVAILABLE 0x0020
#define F3_PACKET_AVAILABLE 0x0040
#define F1_OVERFLOW 0x0080 /* Due to last write. Bkplane has pending write requests */
#define MISC_INTR0 0x0100
#define MISC_INTR1 0x0200
#define MISC_INTR2 0x0400
#define MISC_INTR3 0x0800
#define MISC_INTR4 0x1000
#define F1_INTR 0x2000
#define F2_INTR 0x4000
#define F3_INTR 0x8000
/* Bit mask for 32bit SPID_STATUS_REG device register */
#define STATUS_DATA_NOT_AVAILABLE 0x00000001
#define STATUS_UNDERFLOW 0x00000002
#define STATUS_OVERFLOW 0x00000004
#define STATUS_F2_INTR 0x00000008
#define STATUS_F3_INTR 0x00000010
#define STATUS_F2_RX_READY 0x00000020
#define STATUS_F3_RX_READY 0x00000040
#define STATUS_HOST_CMD_DATA_ERR 0x00000080
#define STATUS_F2_PKT_AVAILABLE 0x00000100
#define STATUS_F2_PKT_LEN_MASK 0x000FFE00
#define STATUS_F2_PKT_LEN_SHIFT 9
#define STATUS_F3_PKT_AVAILABLE 0x00100000
#define STATUS_F3_PKT_LEN_MASK 0xFFE00000
#define STATUS_F3_PKT_LEN_SHIFT 21
/* Bit mask for 16 bits SPID_F1_INFO_REG device register */
#define F1_ENABLED 0x0001
#define F1_RDY_FOR_DATA_TRANSFER 0x0002
#define F1_MAX_PKT_SIZE 0x01FC
/* Bit mask for 16 bits SPID_F2_INFO_REG device register */
#define F2_ENABLED 0x0001
#define F2_RDY_FOR_DATA_TRANSFER 0x0002
#define F2_MAX_PKT_SIZE 0x3FFC
/* Bit mask for 16 bits SPID_F3_INFO_REG device register */
#define F3_ENABLED 0x0001
#define F3_RDY_FOR_DATA_TRANSFER 0x0002
#define F3_MAX_PKT_SIZE 0x3FFC
/* Bit mask for 32 bits SPID_TEST_READ device register read in 16bit LE mode */
#define TEST_RO_DATA_32BIT_LE 0xFEEDBEAD
/* Maximum number of I/O funcs */
#define SPI_MAX_IOFUNCS 4
#define SPI_MAX_PKT_LEN (2048*4)
/* Misc defines */
#define SPI_FUNC_0 0
#define SPI_FUNC_1 1
#define SPI_FUNC_2 2
#define SPI_FUNC_3 3
#define WAIT_F2RXFIFORDY 100
#define WAIT_F2RXFIFORDY_DELAY 20
#endif /* _SPI_H */