3119 lines
81 KiB
C
3119 lines
81 KiB
C
/* Source for:
|
|
* Cypress TrueTouch(TM) Standard Product I2C touchscreen driver.
|
|
* drivers/input/touchscreen/cyttsp-i2c.c
|
|
*
|
|
* Copyright (C) 2009, 2010 Cypress Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2, and only version 2, as published by the
|
|
* Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
*
|
|
* Cypress reserves the right to make changes without further notice
|
|
* to the materials described herein. Cypress does not assume any
|
|
* liability arising out of the application described herein.
|
|
*
|
|
* Contact Cypress Semiconductor at www.cypress.com
|
|
*
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/byteorder/generic.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#ifdef CONFIG_HAS_EARLYSUSPEND
|
|
#include <linux/earlysuspend.h>
|
|
#endif /* CONFIG_HAS_EARLYSUSPEND */
|
|
|
|
#define CY_DECLARE_GLOBALS
|
|
|
|
#include <linux/cyttsp-qc.h>
|
|
|
|
uint32_t cyttsp_tsdebug1 = 0xff;
|
|
module_param_named(tsdebug1, cyttsp_tsdebug1, uint, 0664);
|
|
|
|
#define FW_FNAME_LEN 40
|
|
#define TTSP_BUFF_SIZE 50
|
|
|
|
/* CY TTSP I2C Driver private data */
|
|
struct cyttsp {
|
|
struct i2c_client *client;
|
|
struct input_dev *input;
|
|
struct timer_list timer;
|
|
struct mutex mutex;
|
|
char phys[32];
|
|
struct cyttsp_platform_data *platform_data;
|
|
u8 num_prv_st_tch;
|
|
u16 fw_start_addr;
|
|
u16 act_trk[CY_NUM_TRK_ID];
|
|
u16 prv_st_tch[CY_NUM_ST_TCH_ID];
|
|
u16 prv_mt_tch[CY_NUM_MT_TCH_ID];
|
|
u16 prv_mt_pos[CY_NUM_TRK_ID][2];
|
|
atomic_t irq_enabled;
|
|
bool cyttsp_update_fw;
|
|
bool cyttsp_fwloader_mode;
|
|
bool is_suspended;
|
|
struct regulator **vdd;
|
|
char fw_fname[FW_FNAME_LEN];
|
|
#ifdef CONFIG_HAS_EARLYSUSPEND
|
|
struct early_suspend early_suspend;
|
|
#endif /* CONFIG_HAS_EARLYSUSPEND */
|
|
};
|
|
static u8 irq_cnt; /* comparison counter with register valuw */
|
|
static u32 irq_cnt_total; /* total interrupts */
|
|
static u32 irq_err_cnt; /* count number of touch interrupts with err */
|
|
#define CY_IRQ_CNT_MASK 0x000000FF /* mapped for sizeof count in reg */
|
|
#define CY_IRQ_CNT_REG 0x00 /* tt_undef[0]=reg 0x1B - Gen3 only */
|
|
|
|
#ifdef CONFIG_HAS_EARLYSUSPEND
|
|
static void cyttsp_early_suspend(struct early_suspend *handler);
|
|
static void cyttsp_late_resume(struct early_suspend *handler);
|
|
#endif /* CONFIG_HAS_EARLYSUSPEND */
|
|
|
|
|
|
/* ****************************************************************************
|
|
* Prototypes for static functions
|
|
* ************************************************************************** */
|
|
static irqreturn_t cyttsp_irq(int irq, void *handle);
|
|
static int cyttsp_inlist(u16 prev_track[],
|
|
u8 cur_trk_id, u8 *prev_loc, u8 num_touches);
|
|
static int cyttsp_next_avail_inlist(u16 cur_trk[],
|
|
u8 *new_loc, u8 num_touches);
|
|
static int cyttsp_putbl(struct cyttsp *ts, int show,
|
|
int show_status, int show_version, int show_cid);
|
|
static int __devinit cyttsp_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id);
|
|
static int __devexit cyttsp_remove(struct i2c_client *client);
|
|
static int cyttsp_resume(struct device *dev);
|
|
static int cyttsp_suspend(struct device *dev);
|
|
|
|
/* Static variables */
|
|
static struct cyttsp_gen3_xydata_t g_xy_data;
|
|
static struct cyttsp_bootloader_data_t g_bl_data;
|
|
static struct cyttsp_sysinfo_data_t g_sysinfo_data;
|
|
static const struct i2c_device_id cyttsp_id[] = {
|
|
{ CY_I2C_NAME, 0 }, { }
|
|
};
|
|
static u8 bl_cmd[] = {
|
|
CY_BL_FILE0, CY_BL_CMD, CY_BL_EXIT,
|
|
CY_BL_KEY0, CY_BL_KEY1, CY_BL_KEY2,
|
|
CY_BL_KEY3, CY_BL_KEY4, CY_BL_KEY5,
|
|
CY_BL_KEY6, CY_BL_KEY7};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, cyttsp_id);
|
|
|
|
#ifdef CONFIG_PM
|
|
static const struct dev_pm_ops cyttsp_pm_ops = {
|
|
#ifndef CONFIG_HAS_EARLYSUSPEND
|
|
.suspend = cyttsp_suspend,
|
|
.resume = cyttsp_resume,
|
|
#endif
|
|
};
|
|
#endif
|
|
|
|
static struct i2c_driver cyttsp_driver = {
|
|
.driver = {
|
|
.name = CY_I2C_NAME,
|
|
.owner = THIS_MODULE,
|
|
#ifdef CONFIG_PM
|
|
.pm = &cyttsp_pm_ops,
|
|
#endif
|
|
},
|
|
.probe = cyttsp_probe,
|
|
.remove = __devexit_p(cyttsp_remove),
|
|
.id_table = cyttsp_id,
|
|
};
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver");
|
|
MODULE_AUTHOR("Cypress");
|
|
|
|
static ssize_t cyttsp_irq_status(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
|
|
struct cyttsp *ts = i2c_get_clientdata(client);
|
|
return snprintf(buf, TTSP_BUFF_SIZE, "%u\n",
|
|
atomic_read(&ts->irq_enabled));
|
|
}
|
|
|
|
static ssize_t cyttsp_irq_enable(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
|
|
struct cyttsp *ts = i2c_get_clientdata(client);
|
|
int err = 0;
|
|
unsigned long value;
|
|
|
|
if (size > 2)
|
|
return -EINVAL;
|
|
|
|
err = strict_strtoul(buf, 10, &value);
|
|
if (err != 0)
|
|
return err;
|
|
|
|
switch (value) {
|
|
case 0:
|
|
if (atomic_cmpxchg(&ts->irq_enabled, 1, 0)) {
|
|
pr_info("touch irq disabled!\n");
|
|
disable_irq_nosync(ts->client->irq);
|
|
}
|
|
err = size;
|
|
break;
|
|
case 1:
|
|
if (!atomic_cmpxchg(&ts->irq_enabled, 0, 1)) {
|
|
pr_info("touch irq enabled!\n");
|
|
enable_irq(ts->client->irq);
|
|
}
|
|
err = size;
|
|
break;
|
|
default:
|
|
pr_info("cyttsp_irq_enable failed -> irq_enabled = %d\n",
|
|
atomic_read(&ts->irq_enabled));
|
|
err = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static DEVICE_ATTR(irq_enable, 0664, cyttsp_irq_status, cyttsp_irq_enable);
|
|
|
|
static ssize_t cyttsp_fw_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return snprintf(buf, TTSP_BUFF_SIZE, "%d.%d.%d\n", g_bl_data.appid_lo,
|
|
g_bl_data.appver_hi, g_bl_data.appver_lo);
|
|
}
|
|
|
|
static DEVICE_ATTR(cyttsp_fw_ver, 0664, cyttsp_fw_show, NULL);
|
|
|
|
/* firmware flashing block */
|
|
#define BLK_SIZE 16
|
|
#define DATA_REC_LEN 64
|
|
#define BLK_SEED 0xff
|
|
#define RECAL_REG 0x1b
|
|
|
|
enum bl_commands {
|
|
BL_CMD_WRBLK = 0x39,
|
|
BL_CMD_INIT = 0x38,
|
|
BL_CMD_TERMINATE = 0x3b,
|
|
};
|
|
/* TODO: Add key as part of platform data */
|
|
#define KEY_CS (0 + 1 + 2 + 3 + 4 + 5 + 6 + 7)
|
|
#define KEY {0, 1, 2, 3, 4, 5, 6, 7}
|
|
|
|
static const char _key[] = KEY;
|
|
#define KEY_LEN sizeof(_key)
|
|
|
|
static int rec_cnt;
|
|
struct fw_record {
|
|
u8 seed;
|
|
u8 cmd;
|
|
u8 key[KEY_LEN];
|
|
u8 blk_hi;
|
|
u8 blk_lo;
|
|
u8 data[DATA_REC_LEN];
|
|
u8 data_cs;
|
|
u8 rec_cs;
|
|
};
|
|
#define fw_rec_size (sizeof(struct fw_record))
|
|
|
|
struct cmd_record {
|
|
u8 reg;
|
|
u8 seed;
|
|
u8 cmd;
|
|
u8 key[KEY_LEN];
|
|
};
|
|
#define cmd_rec_size (sizeof(struct cmd_record))
|
|
|
|
static struct fw_record data_record = {
|
|
.seed = BLK_SEED,
|
|
.cmd = BL_CMD_WRBLK,
|
|
.key = KEY,
|
|
};
|
|
|
|
static const struct cmd_record terminate_rec = {
|
|
.reg = 0,
|
|
.seed = BLK_SEED,
|
|
.cmd = BL_CMD_TERMINATE,
|
|
.key = KEY,
|
|
};
|
|
static const struct cmd_record initiate_rec = {
|
|
.reg = 0,
|
|
.seed = BLK_SEED,
|
|
.cmd = BL_CMD_INIT,
|
|
.key = KEY,
|
|
};
|
|
|
|
#define BL_REC1_ADDR 0x0780
|
|
#define BL_REC2_ADDR 0x07c0
|
|
#define BL_CHECKSUM_MASK 0x01
|
|
|
|
#define ID_INFO_REC ":40078000"
|
|
#define ID_INFO_OFFSET_IN_REC 77
|
|
|
|
#define REC_START_CHR ':'
|
|
#define REC_LEN_OFFSET 1
|
|
#define REC_ADDR_HI_OFFSET 3
|
|
#define REC_ADDR_LO_OFFSET 5
|
|
#define REC_TYPE_OFFSET 7
|
|
#define REC_DATA_OFFSET 9
|
|
#define REC_LINE_SIZE 141
|
|
|
|
#define NUM_CHAR_IN_HEX 2
|
|
#define ID_INFO_REC_LEN 9
|
|
|
|
static int cyttsp_soft_reset(struct cyttsp *ts)
|
|
{
|
|
int retval = 0, tries = 0;
|
|
u8 host_reg = CY_SOFT_RESET_MODE;
|
|
|
|
do {
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE, sizeof(host_reg), &host_reg);
|
|
if (retval < 0)
|
|
msleep(20);
|
|
} while (tries++ < 10 && (retval < 0));
|
|
|
|
if (retval < 0) {
|
|
pr_err("%s: failed\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
tries = 0;
|
|
do {
|
|
msleep(20);
|
|
cyttsp_putbl(ts, 1, true, true, false);
|
|
} while (g_bl_data.bl_status != 0x10 &&
|
|
g_bl_data.bl_status != 0x11 &&
|
|
tries++ < 100);
|
|
|
|
if (g_bl_data.bl_status != 0x11 && g_bl_data.bl_status != 0x10)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cyttsp_exit_bl_mode(struct cyttsp *ts)
|
|
{
|
|
int retval, tries = 0;
|
|
|
|
do {
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE, sizeof(bl_cmd), bl_cmd);
|
|
if (retval < 0)
|
|
msleep(20);
|
|
} while (tries++ < 10 && (retval < 0));
|
|
}
|
|
|
|
static void cyttsp_set_sysinfo_mode(struct cyttsp *ts)
|
|
{
|
|
int retval, tries = 0;
|
|
u8 host_reg = CY_SYSINFO_MODE;
|
|
|
|
do {
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE, sizeof(host_reg), &host_reg);
|
|
if (retval < 0)
|
|
msleep(20);
|
|
} while (tries++ < 10 && (retval < 0));
|
|
|
|
/* wait for TTSP Device to complete switch to SysInfo mode */
|
|
if (!(retval < 0)) {
|
|
retval = i2c_smbus_read_i2c_block_data(ts->client,
|
|
CY_REG_BASE,
|
|
sizeof(struct cyttsp_sysinfo_data_t),
|
|
(u8 *)&g_sysinfo_data);
|
|
} else
|
|
pr_err("%s: failed\n", __func__);
|
|
}
|
|
|
|
static void cyttsp_set_opmode(struct cyttsp *ts)
|
|
{
|
|
int retval, tries = 0;
|
|
u8 host_reg = CY_OP_MODE;
|
|
|
|
do {
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE, sizeof(host_reg), &host_reg);
|
|
if (retval < 0)
|
|
msleep(20);
|
|
} while (tries++ < 10 && (retval < 0));
|
|
}
|
|
|
|
static int str2uc(char *str, u8 *val)
|
|
{
|
|
char substr[3];
|
|
unsigned long ulval;
|
|
int rc;
|
|
|
|
if (!str)
|
|
return -EINVAL;
|
|
|
|
if (strnlen(str, NUM_CHAR_IN_HEX) < 2)
|
|
return -EINVAL;
|
|
|
|
substr[0] = str[0];
|
|
substr[1] = str[1];
|
|
substr[2] = '\0';
|
|
|
|
rc = strict_strtoul(substr, 16, &ulval);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
*val = (u8) ulval;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flash_block(struct cyttsp *ts, u8 *blk, int len)
|
|
{
|
|
int retval, i, tries = 0;
|
|
char buf[(2 * (BLK_SIZE + 1)) + 1];
|
|
char *p = buf;
|
|
|
|
for (i = 0; i < len; i++, p += 2)
|
|
snprintf(p, TTSP_BUFF_SIZE, "%02x", blk[i]);
|
|
pr_debug("%s: size %d, pos %ld payload %s\n",
|
|
__func__, len, (long)0, buf);
|
|
|
|
do {
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE, len, blk);
|
|
if (retval < 0)
|
|
msleep(20);
|
|
} while (tries++ < 20 && (retval < 0));
|
|
|
|
if (retval < 0) {
|
|
pr_err("%s: failed\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flash_command(struct cyttsp *ts, const struct cmd_record *record)
|
|
{
|
|
return flash_block(ts, (u8 *)record, cmd_rec_size);
|
|
}
|
|
|
|
static void init_data_record(struct fw_record *rec, unsigned short addr)
|
|
{
|
|
addr >>= 6;
|
|
rec->blk_hi = (addr >> 8) & 0xff;
|
|
rec->blk_lo = addr & 0xff;
|
|
rec->rec_cs = rec->blk_hi + rec->blk_lo +
|
|
(unsigned char)(BLK_SEED + BL_CMD_WRBLK + KEY_CS);
|
|
rec->data_cs = 0;
|
|
}
|
|
|
|
static int check_record(struct cyttsp *ts, u8 *rec)
|
|
{
|
|
int rc;
|
|
u16 addr;
|
|
u8 r_len, type, hi_off, lo_off;
|
|
|
|
rc = str2uc(rec + REC_LEN_OFFSET, &r_len);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = str2uc(rec + REC_TYPE_OFFSET, &type);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
if (*rec != REC_START_CHR || r_len != DATA_REC_LEN || type != 0)
|
|
return -EINVAL;
|
|
|
|
rc = str2uc(rec + REC_ADDR_HI_OFFSET, &hi_off);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = str2uc(rec + REC_ADDR_LO_OFFSET, &lo_off);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
addr = (hi_off << 8) | lo_off;
|
|
|
|
if (addr >= ts->fw_start_addr || addr == BL_REC1_ADDR
|
|
|| addr == BL_REC2_ADDR)
|
|
return 0;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static struct fw_record *prepare_record(u8 *rec)
|
|
{
|
|
int i, rc;
|
|
u16 addr;
|
|
u8 hi_off, lo_off;
|
|
u8 *p;
|
|
|
|
rc = str2uc(rec + REC_ADDR_HI_OFFSET, &hi_off);
|
|
if (rc < 0)
|
|
return ERR_PTR((long) rc);
|
|
|
|
rc = str2uc(rec + REC_ADDR_LO_OFFSET, &lo_off);
|
|
if (rc < 0)
|
|
return ERR_PTR((long) rc);
|
|
|
|
addr = (hi_off << 8) | lo_off;
|
|
|
|
init_data_record(&data_record, addr);
|
|
p = rec + REC_DATA_OFFSET;
|
|
for (i = 0; i < DATA_REC_LEN; i++) {
|
|
rc = str2uc(p, &data_record.data[i]);
|
|
if (rc < 0)
|
|
return ERR_PTR((long) rc);
|
|
data_record.data_cs += data_record.data[i];
|
|
data_record.rec_cs += data_record.data[i];
|
|
p += 2;
|
|
}
|
|
data_record.rec_cs += data_record.data_cs;
|
|
|
|
return &data_record;
|
|
}
|
|
|
|
static int flash_record(struct cyttsp *ts, const struct fw_record *record)
|
|
{
|
|
int len = fw_rec_size;
|
|
int blk_len, rc;
|
|
u8 *rec = (u8 *)record;
|
|
u8 data[BLK_SIZE + 1];
|
|
u8 blk_offset;
|
|
|
|
for (blk_offset = 0; len; len -= blk_len) {
|
|
data[0] = blk_offset;
|
|
blk_len = len > BLK_SIZE ? BLK_SIZE : len;
|
|
memcpy(data + 1, rec, blk_len);
|
|
rec += blk_len;
|
|
rc = flash_block(ts, data, blk_len + 1);
|
|
if (rc < 0)
|
|
return rc;
|
|
blk_offset += blk_len;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int flash_data_rec(struct cyttsp *ts, u8 *buf)
|
|
{
|
|
struct fw_record *rec;
|
|
int rc, tries;
|
|
|
|
if (!buf)
|
|
return -EINVAL;
|
|
|
|
rc = check_record(ts, buf);
|
|
|
|
if (rc < 0) {
|
|
pr_debug("%s: record ignored %s", __func__, buf);
|
|
return 0;
|
|
}
|
|
|
|
rec = prepare_record(buf);
|
|
if (IS_ERR_OR_NULL(rec))
|
|
return PTR_ERR(rec);
|
|
|
|
rc = flash_record(ts, rec);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
tries = 0;
|
|
do {
|
|
if (rec_cnt%2)
|
|
msleep(20);
|
|
cyttsp_putbl(ts, 4, true, false, false);
|
|
} while (g_bl_data.bl_status != 0x10 &&
|
|
g_bl_data.bl_status != 0x11 &&
|
|
tries++ < 100);
|
|
rec_cnt++;
|
|
return rc;
|
|
}
|
|
|
|
static int cyttspfw_flash_firmware(struct cyttsp *ts, const u8 *data,
|
|
int data_len)
|
|
{
|
|
u8 *buf;
|
|
int i, j;
|
|
int rc, tries = 0;
|
|
|
|
/* initiate bootload: this will erase all the existing data */
|
|
rc = flash_command(ts, &initiate_rec);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
do {
|
|
msleep(100);
|
|
cyttsp_putbl(ts, 4, true, false, false);
|
|
} while (g_bl_data.bl_status != 0x10 &&
|
|
g_bl_data.bl_status != 0x11 &&
|
|
tries++ < 100);
|
|
|
|
buf = kzalloc(REC_LINE_SIZE + 1, GFP_KERNEL);
|
|
if (!buf) {
|
|
pr_err("%s: no memory\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rec_cnt = 0;
|
|
/* flash data records */
|
|
for (i = 0, j = 0; i < data_len; i++, j++) {
|
|
if ((data[i] == REC_START_CHR) && j) {
|
|
buf[j] = 0;
|
|
rc = flash_data_rec(ts, buf);
|
|
if (rc < 0)
|
|
return rc;
|
|
j = 0;
|
|
}
|
|
buf[j] = data[i];
|
|
}
|
|
|
|
/* flash last data record */
|
|
if (j) {
|
|
buf[j] = 0;
|
|
rc = flash_data_rec(ts, buf);
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
|
|
kfree(buf);
|
|
|
|
/* termiate bootload */
|
|
tries = 0;
|
|
rc = flash_command(ts, &terminate_rec);
|
|
do {
|
|
msleep(100);
|
|
cyttsp_putbl(ts, 4, true, false, false);
|
|
} while (g_bl_data.bl_status != 0x10 &&
|
|
g_bl_data.bl_status != 0x11 &&
|
|
tries++ < 100);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int get_hex_fw_ver(u8 *p, u8 *ttspver_hi, u8 *ttspver_lo,
|
|
u8 *appid_hi, u8 *appid_lo, u8 *appver_hi,
|
|
u8 *appver_lo, u8 *cid_0, u8 *cid_1, u8 *cid_2)
|
|
{
|
|
int rc;
|
|
|
|
p = p + ID_INFO_OFFSET_IN_REC;
|
|
rc = str2uc(p, ttspver_hi);
|
|
if (rc < 0)
|
|
return rc;
|
|
p += 2;
|
|
rc = str2uc(p, ttspver_lo);
|
|
if (rc < 0)
|
|
return rc;
|
|
p += 2;
|
|
rc = str2uc(p, appid_hi);
|
|
if (rc < 0)
|
|
return rc;
|
|
p += 2;
|
|
rc = str2uc(p, appid_lo);
|
|
if (rc < 0)
|
|
return rc;
|
|
p += 2;
|
|
rc = str2uc(p, appver_hi);
|
|
if (rc < 0)
|
|
return rc;
|
|
p += 2;
|
|
rc = str2uc(p, appver_lo);
|
|
if (rc < 0)
|
|
return rc;
|
|
p += 2;
|
|
rc = str2uc(p, cid_0);
|
|
if (rc < 0)
|
|
return rc;
|
|
p += 2;
|
|
rc = str2uc(p, cid_1);
|
|
if (rc < 0)
|
|
return rc;
|
|
p += 2;
|
|
rc = str2uc(p, cid_2);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cyttspfw_flash_start(struct cyttsp *ts, const u8 *data,
|
|
int data_len, u8 *buf, bool force)
|
|
{
|
|
int rc;
|
|
u8 ttspver_hi = 0, ttspver_lo = 0, fw_upgrade = 0;
|
|
u8 appid_hi = 0, appid_lo = 0;
|
|
u8 appver_hi = 0, appver_lo = 0;
|
|
u8 cid_0 = 0, cid_1 = 0, cid_2 = 0;
|
|
char *p = buf;
|
|
|
|
/* get hex firmware version */
|
|
rc = get_hex_fw_ver(p, &ttspver_hi, &ttspver_lo,
|
|
&appid_hi, &appid_lo, &appver_hi,
|
|
&appver_lo, &cid_0, &cid_1, &cid_2);
|
|
|
|
if (rc < 0) {
|
|
pr_err("%s: unable to get hex firmware version\n", __func__);
|
|
return;
|
|
}
|
|
|
|
/* disable interrupts before flashing */
|
|
if (ts->client->irq == 0)
|
|
del_timer(&ts->timer);
|
|
else
|
|
disable_irq(ts->client->irq);
|
|
|
|
/* enter bootloader idle mode */
|
|
rc = cyttsp_soft_reset(ts);
|
|
|
|
if (rc < 0) {
|
|
pr_err("%s: try entering into idle mode"
|
|
" second time\n", __func__);
|
|
msleep(1000);
|
|
rc = cyttsp_soft_reset(ts);
|
|
}
|
|
|
|
if (rc < 0) {
|
|
pr_err("%s: try again later\n", __func__);
|
|
return;
|
|
}
|
|
|
|
|
|
pr_info("Current firmware: %d.%d.%d", g_bl_data.appid_lo,
|
|
g_bl_data.appver_hi, g_bl_data.appver_lo);
|
|
pr_info("New firmware: %d.%d.%d", appid_lo, appver_hi, appver_lo);
|
|
|
|
if (force)
|
|
fw_upgrade = 1;
|
|
else if (!(g_bl_data.bl_status & BL_CHECKSUM_MASK) &&
|
|
(appid_lo == ts->platform_data->correct_fw_ver))
|
|
fw_upgrade = 1;
|
|
else if ((appid_hi == g_bl_data.appid_hi) &&
|
|
(appid_lo == g_bl_data.appid_lo))
|
|
if (appver_hi > g_bl_data.appver_hi)
|
|
fw_upgrade = 1;
|
|
else if ((appver_hi == g_bl_data.appver_hi) &&
|
|
(appver_lo > g_bl_data.appver_lo))
|
|
fw_upgrade = 1;
|
|
else {
|
|
fw_upgrade = 0;
|
|
pr_info("%s: Firmware version "
|
|
"lesser/equal to existing firmware, "
|
|
"upgrade not needed\n", __func__);
|
|
}
|
|
else if (appid_lo == ts->platform_data->correct_fw_ver)
|
|
fw_upgrade = 1;
|
|
else {
|
|
fw_upgrade = 0;
|
|
pr_info("%s: Firmware versions do not match, "
|
|
"cannot upgrade\n", __func__);
|
|
}
|
|
|
|
if (fw_upgrade) {
|
|
pr_info("%s: Starting firmware upgrade\n", __func__);
|
|
rc = cyttspfw_flash_firmware(ts, data, data_len);
|
|
if (rc < 0)
|
|
pr_err("%s: firmware upgrade failed\n", __func__);
|
|
else
|
|
pr_info("%s: firmware upgrade success\n", __func__);
|
|
}
|
|
|
|
/* enter bootloader idle mode */
|
|
cyttsp_soft_reset(ts);
|
|
/* exit bootloader mode */
|
|
cyttsp_exit_bl_mode(ts);
|
|
msleep(100);
|
|
/* set sysinfo details */
|
|
cyttsp_set_sysinfo_mode(ts);
|
|
/* enter application mode */
|
|
cyttsp_set_opmode(ts);
|
|
|
|
/* enable interrupts */
|
|
if (ts->client->irq == 0)
|
|
mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);
|
|
else
|
|
enable_irq(ts->client->irq);
|
|
}
|
|
|
|
static void cyttspfw_upgrade_start(struct cyttsp *ts, const u8 *data,
|
|
int data_len, bool force)
|
|
{
|
|
int i, j;
|
|
u8 *buf;
|
|
|
|
buf = kzalloc(REC_LINE_SIZE + 1, GFP_KERNEL);
|
|
if (!buf) {
|
|
pr_err("%s: no memory\n", __func__);
|
|
return;
|
|
}
|
|
|
|
for (i = 0, j = 0; i < data_len; i++, j++) {
|
|
if ((data[i] == REC_START_CHR) && j) {
|
|
buf[j] = 0;
|
|
j = 0;
|
|
if (!strncmp(buf, ID_INFO_REC,
|
|
strnlen(ID_INFO_REC, ID_INFO_REC_LEN))) {
|
|
cyttspfw_flash_start(ts, data, data_len,
|
|
buf, force);
|
|
break;
|
|
}
|
|
}
|
|
buf[j] = data[i];
|
|
}
|
|
|
|
/* check in the last record of firmware */
|
|
if (j) {
|
|
buf[j] = 0;
|
|
if (!strncmp(buf, ID_INFO_REC,
|
|
strnlen(ID_INFO_REC, ID_INFO_REC_LEN))) {
|
|
cyttspfw_flash_start(ts, data, data_len,
|
|
buf, force);
|
|
}
|
|
}
|
|
|
|
kfree(buf);
|
|
}
|
|
|
|
static void cyttspfw_upgrade(struct device *dev, bool force)
|
|
{
|
|
struct cyttsp *ts = dev_get_drvdata(dev);
|
|
const struct firmware *cyttsp_fw;
|
|
int retval = 0;
|
|
|
|
if (ts->is_suspended == true) {
|
|
pr_err("%s: in suspend state, resume it\n", __func__);
|
|
retval = cyttsp_resume(dev);
|
|
if (retval < 0) {
|
|
pr_err("%s: unable to resume\n", __func__);
|
|
return;
|
|
}
|
|
}
|
|
|
|
retval = request_firmware(&cyttsp_fw, ts->fw_fname, dev);
|
|
if (retval < 0) {
|
|
pr_err("%s: %s request failed(%d)\n", __func__,
|
|
ts->fw_fname, retval);
|
|
} else {
|
|
/* check and start upgrade */
|
|
cyttspfw_upgrade_start(ts, cyttsp_fw->data,
|
|
cyttsp_fw->size, force);
|
|
release_firmware(cyttsp_fw);
|
|
}
|
|
}
|
|
|
|
static ssize_t cyttsp_update_fw_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct cyttsp *ts = dev_get_drvdata(dev);
|
|
return snprintf(buf, 2, "%d\n", ts->cyttsp_fwloader_mode);
|
|
}
|
|
|
|
static ssize_t cyttsp_force_update_fw_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
struct cyttsp *ts = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int rc;
|
|
|
|
if (size > 2)
|
|
return -EINVAL;
|
|
|
|
rc = strict_strtoul(buf, 10, &val);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
mutex_lock(&ts->mutex);
|
|
if (!ts->cyttsp_fwloader_mode && val) {
|
|
ts->cyttsp_fwloader_mode = 1;
|
|
cyttspfw_upgrade(dev, true);
|
|
ts->cyttsp_fwloader_mode = 0;
|
|
}
|
|
mutex_unlock(&ts->mutex);
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(cyttsp_force_update_fw, 0664, cyttsp_update_fw_show,
|
|
cyttsp_force_update_fw_store);
|
|
|
|
static ssize_t cyttsp_update_fw_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
struct cyttsp *ts = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int rc;
|
|
|
|
if (size > 2)
|
|
return -EINVAL;
|
|
|
|
rc = strict_strtoul(buf, 10, &val);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
mutex_lock(&ts->mutex);
|
|
if (!ts->cyttsp_fwloader_mode && val) {
|
|
ts->cyttsp_fwloader_mode = 1;
|
|
cyttspfw_upgrade(dev, false);
|
|
ts->cyttsp_fwloader_mode = 0;
|
|
}
|
|
mutex_unlock(&ts->mutex);
|
|
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(cyttsp_update_fw, 0664, cyttsp_update_fw_show,
|
|
cyttsp_update_fw_store);
|
|
|
|
static ssize_t cyttsp_fw_name_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct cyttsp *ts = dev_get_drvdata(dev);
|
|
return snprintf(buf, FW_FNAME_LEN - 1, "%s\n", ts->fw_fname);
|
|
}
|
|
|
|
static ssize_t cyttsp_fw_name_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
struct cyttsp *ts = dev_get_drvdata(dev);
|
|
|
|
if (size > FW_FNAME_LEN - 1)
|
|
return -EINVAL;
|
|
|
|
strlcpy(ts->fw_fname, buf, size);
|
|
if (ts->fw_fname[size-1] == '\n')
|
|
ts->fw_fname[size-1] = 0;
|
|
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(cyttsp_fw_name, 0664, cyttsp_fw_name_show,
|
|
cyttsp_fw_name_store);
|
|
|
|
static void cyttsp_xy_handler(struct cyttsp *ts)
|
|
{
|
|
u8 id, tilt, rev_x, rev_y;
|
|
u8 i, loc;
|
|
u8 prv_tch; /* number of previous touches */
|
|
u8 cur_tch; /* number of current touches */
|
|
u16 tmp_trk[CY_NUM_MT_TCH_ID];
|
|
u16 snd_trk[CY_NUM_MT_TCH_ID];
|
|
u16 cur_trk[CY_NUM_TRK_ID];
|
|
u16 cur_st_tch[CY_NUM_ST_TCH_ID];
|
|
u16 cur_mt_tch[CY_NUM_MT_TCH_ID];
|
|
/* if NOT CY_USE_TRACKING_ID then
|
|
* only uses CY_NUM_MT_TCH_ID positions */
|
|
u16 cur_mt_pos[CY_NUM_TRK_ID][2];
|
|
/* if NOT CY_USE_TRACKING_ID then
|
|
* only uses CY_NUM_MT_TCH_ID positions */
|
|
u8 cur_mt_z[CY_NUM_TRK_ID];
|
|
u8 curr_tool_width;
|
|
u16 st_x1, st_y1;
|
|
u8 st_z1;
|
|
u16 st_x2, st_y2;
|
|
u8 st_z2;
|
|
s32 retval;
|
|
int val;
|
|
|
|
cyttsp_xdebug("TTSP handler start 1:\n");
|
|
|
|
/* get event data from CYTTSP device */
|
|
i = CY_NUM_RETRY;
|
|
do {
|
|
retval = i2c_smbus_read_i2c_block_data(ts->client,
|
|
CY_REG_BASE,
|
|
sizeof(struct cyttsp_gen3_xydata_t), (u8 *)&g_xy_data);
|
|
} while ((retval < CY_OK) && --i);
|
|
|
|
if (retval < CY_OK) {
|
|
/* return immediately on
|
|
* failure to read device on the i2c bus */
|
|
goto exit_xy_handler;
|
|
}
|
|
|
|
cyttsp_xdebug("TTSP handler start 2:\n");
|
|
|
|
/* compare own irq counter with the device irq counter */
|
|
if (ts->client->irq) {
|
|
u8 host_reg;
|
|
u8 cur_cnt;
|
|
if (ts->platform_data->use_hndshk) {
|
|
|
|
host_reg = g_xy_data.hst_mode & CY_HNDSHK_BIT ?
|
|
g_xy_data.hst_mode & ~CY_HNDSHK_BIT :
|
|
g_xy_data.hst_mode | CY_HNDSHK_BIT;
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE, sizeof(host_reg), &host_reg);
|
|
}
|
|
cur_cnt = g_xy_data.tt_undef[CY_IRQ_CNT_REG];
|
|
irq_cnt_total++;
|
|
irq_cnt++;
|
|
if (irq_cnt != cur_cnt) {
|
|
irq_err_cnt++;
|
|
cyttsp_debug("i_c_ER: dv=%d fw=%d hm=%02X t=%lu te=%lu\n", \
|
|
irq_cnt, \
|
|
cur_cnt, g_xy_data.hst_mode, \
|
|
(unsigned long)irq_cnt_total, \
|
|
(unsigned long)irq_err_cnt);
|
|
} else {
|
|
cyttsp_debug("i_c_ok: dv=%d fw=%d hm=%02X t=%lu te=%lu\n", \
|
|
irq_cnt, \
|
|
cur_cnt, g_xy_data.hst_mode, \
|
|
(unsigned long)irq_cnt_total, \
|
|
(unsigned long)irq_err_cnt);
|
|
}
|
|
irq_cnt = cur_cnt;
|
|
}
|
|
|
|
/* Get the current num touches and return if there are no touches */
|
|
if ((GET_BOOTLOADERMODE(g_xy_data.tt_mode) == 1) ||
|
|
(GET_HSTMODE(g_xy_data.hst_mode) != CY_OK)) {
|
|
u8 host_reg, tries;
|
|
/* the TTSP device has suffered spurious reset or mode switch */
|
|
cyttsp_debug( \
|
|
"Spurious err opmode (tt_mode=%02X hst_mode=%02X)\n", \
|
|
g_xy_data.tt_mode, g_xy_data.hst_mode);
|
|
cyttsp_debug("Reset TTSP Device; Terminating active tracks\n");
|
|
/* terminate all active tracks */
|
|
cur_tch = CY_NTCH;
|
|
/* reset TTSP part and take it back out of Bootloader mode */
|
|
/* reset TTSP Device back to bootloader mode */
|
|
host_reg = CY_SOFT_RESET_MODE;
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
|
|
sizeof(host_reg), &host_reg);
|
|
/* wait for TTSP Device to complete reset back to bootloader */
|
|
tries = 0;
|
|
do {
|
|
usleep_range(1000, 1000);
|
|
cyttsp_putbl(ts, 1, false, false, false);
|
|
} while (g_bl_data.bl_status != 0x10 &&
|
|
g_bl_data.bl_status != 0x11 &&
|
|
tries++ < 100);
|
|
retval = cyttsp_putbl(ts, 1, true, true, true);
|
|
/* switch back to operational mode */
|
|
/* take TTSP device out of bootloader mode;
|
|
* switch back to TrueTouch operational mode */
|
|
if (!(retval < CY_OK)) {
|
|
int tries;
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE,
|
|
sizeof(bl_cmd), bl_cmd);
|
|
/* wait for TTSP Device to complete
|
|
* switch to Operational mode */
|
|
tries = 0;
|
|
do {
|
|
msleep(100);
|
|
cyttsp_putbl(ts, 2, false, false, false);
|
|
} while (GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
|
|
tries++ < 100);
|
|
cyttsp_putbl(ts, 2, true, false, false);
|
|
}
|
|
goto exit_xy_handler;
|
|
} else {
|
|
cur_tch = GET_NUM_TOUCHES(g_xy_data.tt_stat);
|
|
if (IS_LARGE_AREA(g_xy_data.tt_stat)) {
|
|
/* terminate all active tracks */
|
|
cur_tch = CY_NTCH;
|
|
cyttsp_debug("Large obj detect (tt_stat=0x%02X). Terminate act trks\n", \
|
|
g_xy_data.tt_stat);
|
|
} else if (cur_tch > CY_NUM_MT_TCH_ID) {
|
|
/* if the number of fingers on the touch surface
|
|
* is more than the maximum then
|
|
* there will be no new track information
|
|
* even for the original touches.
|
|
* Therefore, terminate all active tracks.
|
|
*/
|
|
cur_tch = CY_NTCH;
|
|
cyttsp_debug("Num touch err (tt_stat=0x%02X). Terminate act trks\n", \
|
|
g_xy_data.tt_stat);
|
|
}
|
|
}
|
|
|
|
/* set tool size */
|
|
curr_tool_width = CY_SMALL_TOOL_WIDTH;
|
|
|
|
/* translate Gen2 interface data into comparable Gen3 data */
|
|
if (ts->platform_data->gen == CY_GEN2) {
|
|
struct cyttsp_gen2_xydata_t *pxy_gen2_data;
|
|
pxy_gen2_data = (struct cyttsp_gen2_xydata_t *)(&g_xy_data);
|
|
|
|
/* use test data? */
|
|
cyttsp_testdat(&g_xy_data, &tt_gen2_testray, \
|
|
sizeof(struct cyttsp_gen3_xydata_t));
|
|
|
|
if (ts->platform_data->disable_ghost_det &&
|
|
(cur_tch == CY_GEN2_GHOST))
|
|
cur_tch = CY_GEN2_2TOUCH;
|
|
|
|
if (pxy_gen2_data->evnt_idx == CY_GEN2_NOTOUCH) {
|
|
cur_tch = 0;
|
|
} else if (cur_tch == CY_GEN2_GHOST) {
|
|
cur_tch = 0;
|
|
} else if (cur_tch == CY_GEN2_2TOUCH) {
|
|
/* stuff artificial track ID1 and ID2 */
|
|
g_xy_data.touch12_id = 0x12;
|
|
g_xy_data.z1 = CY_MAXZ;
|
|
g_xy_data.z2 = CY_MAXZ;
|
|
cur_tch--; /* 2 touches */
|
|
} else if (cur_tch == CY_GEN2_1TOUCH) {
|
|
/* stuff artificial track ID1 and ID2 */
|
|
g_xy_data.touch12_id = 0x12;
|
|
g_xy_data.z1 = CY_MAXZ;
|
|
g_xy_data.z2 = CY_NTCH;
|
|
if (pxy_gen2_data->evnt_idx == CY_GEN2_TOUCH2) {
|
|
/* push touch 2 data into touch1
|
|
* (first finger up; second finger down) */
|
|
/* stuff artificial track ID1 for touch2 info */
|
|
g_xy_data.touch12_id = 0x20;
|
|
/* stuff touch 1 with touch 2 coordinate data */
|
|
g_xy_data.x1 = g_xy_data.x2;
|
|
g_xy_data.y1 = g_xy_data.y2;
|
|
}
|
|
} else {
|
|
cur_tch = 0;
|
|
}
|
|
} else {
|
|
/* use test data? */
|
|
cyttsp_testdat(&g_xy_data, &tt_gen3_testray, \
|
|
sizeof(struct cyttsp_gen3_xydata_t));
|
|
}
|
|
|
|
|
|
|
|
/* clear current active track ID array and count previous touches */
|
|
for (id = 0, prv_tch = CY_NTCH;
|
|
id < CY_NUM_TRK_ID; id++) {
|
|
cur_trk[id] = CY_NTCH;
|
|
prv_tch += ts->act_trk[id];
|
|
}
|
|
|
|
/* send no events if no previous touches and no new touches */
|
|
if ((prv_tch == CY_NTCH) &&
|
|
((cur_tch == CY_NTCH) ||
|
|
(cur_tch > CY_NUM_MT_TCH_ID))) {
|
|
goto exit_xy_handler;
|
|
}
|
|
|
|
cyttsp_debug("prev=%d curr=%d\n", prv_tch, cur_tch);
|
|
|
|
for (id = 0; id < CY_NUM_ST_TCH_ID; id++) {
|
|
/* clear current single touches array */
|
|
cur_st_tch[id] = CY_IGNR_TCH;
|
|
}
|
|
|
|
/* clear single touch positions */
|
|
st_x1 = CY_NTCH;
|
|
st_y1 = CY_NTCH;
|
|
st_z1 = CY_NTCH;
|
|
st_x2 = CY_NTCH;
|
|
st_y2 = CY_NTCH;
|
|
st_z2 = CY_NTCH;
|
|
|
|
for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
|
|
/* clear current multi-touches array and
|
|
* multi-touch positions/z */
|
|
cur_mt_tch[id] = CY_IGNR_TCH;
|
|
}
|
|
|
|
if (ts->platform_data->use_trk_id) {
|
|
for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
|
|
cur_mt_pos[id][CY_XPOS] = 0;
|
|
cur_mt_pos[id][CY_YPOS] = 0;
|
|
cur_mt_z[id] = 0;
|
|
}
|
|
} else {
|
|
for (id = 0; id < CY_NUM_TRK_ID; id++) {
|
|
cur_mt_pos[id][CY_XPOS] = 0;
|
|
cur_mt_pos[id][CY_YPOS] = 0;
|
|
cur_mt_z[id] = 0;
|
|
}
|
|
}
|
|
|
|
/* Determine if display is tilted */
|
|
if (FLIP_DATA(ts->platform_data->flags))
|
|
tilt = true;
|
|
else
|
|
tilt = false;
|
|
|
|
/* Check for switch in origin */
|
|
if (REVERSE_X(ts->platform_data->flags))
|
|
rev_x = true;
|
|
else
|
|
rev_x = false;
|
|
|
|
if (REVERSE_Y(ts->platform_data->flags))
|
|
rev_y = true;
|
|
else
|
|
rev_y = false;
|
|
|
|
if (cur_tch) {
|
|
struct cyttsp_gen2_xydata_t *pxy_gen2_data;
|
|
struct cyttsp_gen3_xydata_t *pxy_gen3_data;
|
|
switch (ts->platform_data->gen) {
|
|
case CY_GEN2: {
|
|
pxy_gen2_data =
|
|
(struct cyttsp_gen2_xydata_t *)(&g_xy_data);
|
|
cyttsp_xdebug("TTSP Gen2 report:\n");
|
|
cyttsp_xdebug("%02X %02X %02X\n", \
|
|
pxy_gen2_data->hst_mode, \
|
|
pxy_gen2_data->tt_mode, \
|
|
pxy_gen2_data->tt_stat);
|
|
cyttsp_xdebug("%04X %04X %02X %02X\n", \
|
|
pxy_gen2_data->x1, \
|
|
pxy_gen2_data->y1, \
|
|
pxy_gen2_data->z1, \
|
|
pxy_gen2_data->evnt_idx);
|
|
cyttsp_xdebug("%04X %04X %02X\n", \
|
|
pxy_gen2_data->x2, \
|
|
pxy_gen2_data->y2, \
|
|
pxy_gen2_data->tt_undef1);
|
|
cyttsp_xdebug("%02X %02X %02X\n", \
|
|
pxy_gen2_data->gest_cnt, \
|
|
pxy_gen2_data->gest_id, \
|
|
pxy_gen2_data->gest_set);
|
|
break;
|
|
}
|
|
case CY_GEN3:
|
|
default: {
|
|
pxy_gen3_data =
|
|
(struct cyttsp_gen3_xydata_t *)(&g_xy_data);
|
|
cyttsp_xdebug("TTSP Gen3 report:\n");
|
|
cyttsp_xdebug("%02X %02X %02X\n", \
|
|
pxy_gen3_data->hst_mode,
|
|
pxy_gen3_data->tt_mode,
|
|
pxy_gen3_data->tt_stat);
|
|
cyttsp_xdebug("%04X %04X %02X %02X", \
|
|
pxy_gen3_data->x1,
|
|
pxy_gen3_data->y1,
|
|
pxy_gen3_data->z1, \
|
|
pxy_gen3_data->touch12_id);
|
|
cyttsp_xdebug("%04X %04X %02X\n", \
|
|
pxy_gen3_data->x2, \
|
|
pxy_gen3_data->y2, \
|
|
pxy_gen3_data->z2);
|
|
cyttsp_xdebug("%02X %02X %02X\n", \
|
|
pxy_gen3_data->gest_cnt, \
|
|
pxy_gen3_data->gest_id, \
|
|
pxy_gen3_data->gest_set);
|
|
cyttsp_xdebug("%04X %04X %02X %02X\n", \
|
|
pxy_gen3_data->x3, \
|
|
pxy_gen3_data->y3, \
|
|
pxy_gen3_data->z3, \
|
|
pxy_gen3_data->touch34_id);
|
|
cyttsp_xdebug("%04X %04X %02X\n", \
|
|
pxy_gen3_data->x4, \
|
|
pxy_gen3_data->y4, \
|
|
pxy_gen3_data->z4);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* process the touches */
|
|
switch (cur_tch) {
|
|
case 4: {
|
|
g_xy_data.x4 = be16_to_cpu(g_xy_data.x4);
|
|
g_xy_data.y4 = be16_to_cpu(g_xy_data.y4);
|
|
if (tilt)
|
|
FLIP_XY(g_xy_data.x4, g_xy_data.y4);
|
|
|
|
if (rev_x) {
|
|
val = INVERT_X(g_xy_data.x4,
|
|
ts->platform_data->panel_maxx);
|
|
if (val >= 0)
|
|
g_xy_data.x4 = val;
|
|
else
|
|
pr_debug("X value is negative. Please configure"
|
|
" maxx in platform data structure\n");
|
|
}
|
|
if (rev_y) {
|
|
val = INVERT_X(g_xy_data.y4,
|
|
ts->platform_data->panel_maxy);
|
|
if (val >= 0)
|
|
g_xy_data.y4 = val;
|
|
else
|
|
pr_debug("Y value is negative. Please configure"
|
|
" maxy in platform data structure\n");
|
|
|
|
}
|
|
id = GET_TOUCH4_ID(g_xy_data.touch34_id);
|
|
if (ts->platform_data->use_trk_id) {
|
|
cur_mt_pos[CY_MT_TCH4_IDX][CY_XPOS] =
|
|
g_xy_data.x4;
|
|
cur_mt_pos[CY_MT_TCH4_IDX][CY_YPOS] =
|
|
g_xy_data.y4;
|
|
cur_mt_z[CY_MT_TCH4_IDX] = g_xy_data.z4;
|
|
} else {
|
|
cur_mt_pos[id][CY_XPOS] = g_xy_data.x4;
|
|
cur_mt_pos[id][CY_YPOS] = g_xy_data.y4;
|
|
cur_mt_z[id] = g_xy_data.z4;
|
|
}
|
|
cur_mt_tch[CY_MT_TCH4_IDX] = id;
|
|
cur_trk[id] = CY_TCH;
|
|
if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
|
|
CY_NUM_TRK_ID) {
|
|
if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
|
|
st_x1 = g_xy_data.x4;
|
|
st_y1 = g_xy_data.y4;
|
|
st_z1 = g_xy_data.z4;
|
|
cur_st_tch[CY_ST_FNGR1_IDX] = id;
|
|
} else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
|
|
st_x2 = g_xy_data.x4;
|
|
st_y2 = g_xy_data.y4;
|
|
st_z2 = g_xy_data.z4;
|
|
cur_st_tch[CY_ST_FNGR2_IDX] = id;
|
|
}
|
|
}
|
|
cyttsp_xdebug("4th XYZ:% 3d,% 3d,% 3d ID:% 2d\n\n", \
|
|
g_xy_data.x4, g_xy_data.y4, g_xy_data.z4, \
|
|
(g_xy_data.touch34_id & 0x0F));
|
|
/* do not break */
|
|
}
|
|
case 3: {
|
|
g_xy_data.x3 = be16_to_cpu(g_xy_data.x3);
|
|
g_xy_data.y3 = be16_to_cpu(g_xy_data.y3);
|
|
if (tilt)
|
|
FLIP_XY(g_xy_data.x3, g_xy_data.y3);
|
|
|
|
if (rev_x) {
|
|
val = INVERT_X(g_xy_data.x3,
|
|
ts->platform_data->panel_maxx);
|
|
if (val >= 0)
|
|
g_xy_data.x3 = val;
|
|
else
|
|
pr_debug("X value is negative. Please configure"
|
|
" maxx in platform data structure\n");
|
|
|
|
}
|
|
if (rev_y) {
|
|
val = INVERT_X(g_xy_data.y3,
|
|
ts->platform_data->panel_maxy);
|
|
if (val >= 0)
|
|
g_xy_data.y3 = val;
|
|
else
|
|
pr_debug("Y value is negative. Please configure"
|
|
" maxy in platform data structure\n");
|
|
|
|
}
|
|
id = GET_TOUCH3_ID(g_xy_data.touch34_id);
|
|
if (ts->platform_data->use_trk_id) {
|
|
cur_mt_pos[CY_MT_TCH3_IDX][CY_XPOS] =
|
|
g_xy_data.x3;
|
|
cur_mt_pos[CY_MT_TCH3_IDX][CY_YPOS] =
|
|
g_xy_data.y3;
|
|
cur_mt_z[CY_MT_TCH3_IDX] = g_xy_data.z3;
|
|
} else {
|
|
cur_mt_pos[id][CY_XPOS] = g_xy_data.x3;
|
|
cur_mt_pos[id][CY_YPOS] = g_xy_data.y3;
|
|
cur_mt_z[id] = g_xy_data.z3;
|
|
}
|
|
cur_mt_tch[CY_MT_TCH3_IDX] = id;
|
|
cur_trk[id] = CY_TCH;
|
|
if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
|
|
CY_NUM_TRK_ID) {
|
|
if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
|
|
st_x1 = g_xy_data.x3;
|
|
st_y1 = g_xy_data.y3;
|
|
st_z1 = g_xy_data.z3;
|
|
cur_st_tch[CY_ST_FNGR1_IDX] = id;
|
|
} else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
|
|
st_x2 = g_xy_data.x3;
|
|
st_y2 = g_xy_data.y3;
|
|
st_z2 = g_xy_data.z3;
|
|
cur_st_tch[CY_ST_FNGR2_IDX] = id;
|
|
}
|
|
}
|
|
cyttsp_xdebug("3rd XYZ:% 3d,% 3d,% 3d ID:% 2d\n", \
|
|
g_xy_data.x3, g_xy_data.y3, g_xy_data.z3, \
|
|
((g_xy_data.touch34_id >> 4) & 0x0F));
|
|
/* do not break */
|
|
}
|
|
case 2: {
|
|
g_xy_data.x2 = be16_to_cpu(g_xy_data.x2);
|
|
g_xy_data.y2 = be16_to_cpu(g_xy_data.y2);
|
|
if (tilt)
|
|
FLIP_XY(g_xy_data.x2, g_xy_data.y2);
|
|
|
|
if (rev_x) {
|
|
val = INVERT_X(g_xy_data.x2,
|
|
ts->platform_data->panel_maxx);
|
|
if (val >= 0)
|
|
g_xy_data.x2 = val;
|
|
else
|
|
pr_debug("X value is negative. Please configure"
|
|
" maxx in platform data structure\n");
|
|
}
|
|
if (rev_y) {
|
|
val = INVERT_X(g_xy_data.y2,
|
|
ts->platform_data->panel_maxy);
|
|
if (val >= 0)
|
|
g_xy_data.y2 = val;
|
|
else
|
|
pr_debug("Y value is negative. Please configure"
|
|
" maxy in platform data structure\n");
|
|
}
|
|
id = GET_TOUCH2_ID(g_xy_data.touch12_id);
|
|
if (ts->platform_data->use_trk_id) {
|
|
cur_mt_pos[CY_MT_TCH2_IDX][CY_XPOS] =
|
|
g_xy_data.x2;
|
|
cur_mt_pos[CY_MT_TCH2_IDX][CY_YPOS] =
|
|
g_xy_data.y2;
|
|
cur_mt_z[CY_MT_TCH2_IDX] = g_xy_data.z2;
|
|
} else {
|
|
cur_mt_pos[id][CY_XPOS] = g_xy_data.x2;
|
|
cur_mt_pos[id][CY_YPOS] = g_xy_data.y2;
|
|
cur_mt_z[id] = g_xy_data.z2;
|
|
}
|
|
cur_mt_tch[CY_MT_TCH2_IDX] = id;
|
|
cur_trk[id] = CY_TCH;
|
|
if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
|
|
CY_NUM_TRK_ID) {
|
|
if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
|
|
st_x1 = g_xy_data.x2;
|
|
st_y1 = g_xy_data.y2;
|
|
st_z1 = g_xy_data.z2;
|
|
cur_st_tch[CY_ST_FNGR1_IDX] = id;
|
|
} else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
|
|
st_x2 = g_xy_data.x2;
|
|
st_y2 = g_xy_data.y2;
|
|
st_z2 = g_xy_data.z2;
|
|
cur_st_tch[CY_ST_FNGR2_IDX] = id;
|
|
}
|
|
}
|
|
cyttsp_xdebug("2nd XYZ:% 3d,% 3d,% 3d ID:% 2d\n", \
|
|
g_xy_data.x2, g_xy_data.y2, g_xy_data.z2, \
|
|
(g_xy_data.touch12_id & 0x0F));
|
|
/* do not break */
|
|
}
|
|
case 1: {
|
|
g_xy_data.x1 = be16_to_cpu(g_xy_data.x1);
|
|
g_xy_data.y1 = be16_to_cpu(g_xy_data.y1);
|
|
if (tilt)
|
|
FLIP_XY(g_xy_data.x1, g_xy_data.y1);
|
|
|
|
if (rev_x) {
|
|
val = INVERT_X(g_xy_data.x1,
|
|
ts->platform_data->panel_maxx);
|
|
if (val >= 0)
|
|
g_xy_data.x1 = val;
|
|
else
|
|
pr_debug("X value is negative. Please configure"
|
|
" maxx in platform data structure\n");
|
|
}
|
|
if (rev_y) {
|
|
val = INVERT_X(g_xy_data.y1,
|
|
ts->platform_data->panel_maxy);
|
|
if (val >= 0)
|
|
g_xy_data.y1 = val;
|
|
else
|
|
pr_debug("Y value is negative. Please configure"
|
|
" maxy in platform data structure");
|
|
}
|
|
id = GET_TOUCH1_ID(g_xy_data.touch12_id);
|
|
if (ts->platform_data->use_trk_id) {
|
|
cur_mt_pos[CY_MT_TCH1_IDX][CY_XPOS] =
|
|
g_xy_data.x1;
|
|
cur_mt_pos[CY_MT_TCH1_IDX][CY_YPOS] =
|
|
g_xy_data.y1;
|
|
cur_mt_z[CY_MT_TCH1_IDX] = g_xy_data.z1;
|
|
} else {
|
|
cur_mt_pos[id][CY_XPOS] = g_xy_data.x1;
|
|
cur_mt_pos[id][CY_YPOS] = g_xy_data.y1;
|
|
cur_mt_z[id] = g_xy_data.z1;
|
|
}
|
|
cur_mt_tch[CY_MT_TCH1_IDX] = id;
|
|
cur_trk[id] = CY_TCH;
|
|
if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
|
|
CY_NUM_TRK_ID) {
|
|
if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
|
|
st_x1 = g_xy_data.x1;
|
|
st_y1 = g_xy_data.y1;
|
|
st_z1 = g_xy_data.z1;
|
|
cur_st_tch[CY_ST_FNGR1_IDX] = id;
|
|
} else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
|
|
st_x2 = g_xy_data.x1;
|
|
st_y2 = g_xy_data.y1;
|
|
st_z2 = g_xy_data.z1;
|
|
cur_st_tch[CY_ST_FNGR2_IDX] = id;
|
|
}
|
|
}
|
|
cyttsp_xdebug("1st XYZ:% 3d,% 3d,% 3d ID:% 2d\n", \
|
|
g_xy_data.x1, g_xy_data.y1, g_xy_data.z1, \
|
|
((g_xy_data.touch12_id >> 4) & 0x0F));
|
|
break;
|
|
}
|
|
case 0:
|
|
default:{
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* handle Single Touch signals */
|
|
if (ts->platform_data->use_st) {
|
|
cyttsp_xdebug("ST STEP 0 - ST1 ID=%d ST2 ID=%d\n", \
|
|
cur_st_tch[CY_ST_FNGR1_IDX], \
|
|
cur_st_tch[CY_ST_FNGR2_IDX]);
|
|
if (cur_st_tch[CY_ST_FNGR1_IDX] > CY_NUM_TRK_ID) {
|
|
/* reassign finger 1 and 2 positions to new tracks */
|
|
if (cur_tch > 0) {
|
|
/* reassign st finger1 */
|
|
if (ts->platform_data->use_trk_id) {
|
|
id = CY_MT_TCH1_IDX;
|
|
cur_st_tch[CY_ST_FNGR1_IDX] = cur_mt_tch[id];
|
|
} else {
|
|
id = GET_TOUCH1_ID(g_xy_data.touch12_id);
|
|
cur_st_tch[CY_ST_FNGR1_IDX] = id;
|
|
}
|
|
st_x1 = cur_mt_pos[id][CY_XPOS];
|
|
st_y1 = cur_mt_pos[id][CY_YPOS];
|
|
st_z1 = cur_mt_z[id];
|
|
cyttsp_xdebug("ST STEP 1 - ST1 ID=%3d\n", \
|
|
cur_st_tch[CY_ST_FNGR1_IDX]);
|
|
if ((cur_tch > 1) &&
|
|
(cur_st_tch[CY_ST_FNGR2_IDX] >
|
|
CY_NUM_TRK_ID)) {
|
|
/* reassign st finger2 */
|
|
if (cur_tch > 1) {
|
|
if (ts->platform_data->use_trk_id) {
|
|
id = CY_MT_TCH2_IDX;
|
|
cur_st_tch[CY_ST_FNGR2_IDX] = cur_mt_tch[id];
|
|
} else {
|
|
id = GET_TOUCH2_ID(g_xy_data.touch12_id);
|
|
cur_st_tch[CY_ST_FNGR2_IDX] = id;
|
|
}
|
|
st_x2 = cur_mt_pos[id][CY_XPOS];
|
|
st_y2 = cur_mt_pos[id][CY_YPOS];
|
|
st_z2 = cur_mt_z[id];
|
|
cyttsp_xdebug("ST STEP 2 - ST2 ID=%3d\n", \
|
|
cur_st_tch[CY_ST_FNGR2_IDX]);
|
|
}
|
|
}
|
|
}
|
|
} else if (cur_st_tch[CY_ST_FNGR2_IDX] > CY_NUM_TRK_ID) {
|
|
if (cur_tch > 1) {
|
|
/* reassign st finger2 */
|
|
if (ts->platform_data->use_trk_id) {
|
|
/* reassign st finger2 */
|
|
id = CY_MT_TCH2_IDX;
|
|
cur_st_tch[CY_ST_FNGR2_IDX] =
|
|
cur_mt_tch[id];
|
|
} else {
|
|
/* reassign st finger2 */
|
|
id = GET_TOUCH2_ID(g_xy_data.touch12_id);
|
|
cur_st_tch[CY_ST_FNGR2_IDX] = id;
|
|
}
|
|
st_x2 = cur_mt_pos[id][CY_XPOS];
|
|
st_y2 = cur_mt_pos[id][CY_YPOS];
|
|
st_z2 = cur_mt_z[id];
|
|
cyttsp_xdebug("ST STEP 3 - ST2 ID=%3d\n", \
|
|
cur_st_tch[CY_ST_FNGR2_IDX]);
|
|
}
|
|
}
|
|
/* if the 1st touch is missing and there is a 2nd touch,
|
|
* then set the 1st touch to 2nd touch and terminate 2nd touch
|
|
*/
|
|
if ((cur_st_tch[CY_ST_FNGR1_IDX] > CY_NUM_TRK_ID) &&
|
|
(cur_st_tch[CY_ST_FNGR2_IDX] < CY_NUM_TRK_ID)) {
|
|
st_x1 = st_x2;
|
|
st_y1 = st_y2;
|
|
st_z1 = st_z2;
|
|
cur_st_tch[CY_ST_FNGR1_IDX] =
|
|
cur_st_tch[CY_ST_FNGR2_IDX];
|
|
cur_st_tch[CY_ST_FNGR2_IDX] =
|
|
CY_IGNR_TCH;
|
|
}
|
|
/* if the 2nd touch ends up equal to the 1st touch,
|
|
* then just report a single touch */
|
|
if (cur_st_tch[CY_ST_FNGR1_IDX] ==
|
|
cur_st_tch[CY_ST_FNGR2_IDX]) {
|
|
cur_st_tch[CY_ST_FNGR2_IDX] =
|
|
CY_IGNR_TCH;
|
|
}
|
|
/* set Single Touch current event signals */
|
|
if (cur_st_tch[CY_ST_FNGR1_IDX] < CY_NUM_TRK_ID) {
|
|
input_report_abs(ts->input,
|
|
ABS_X, st_x1);
|
|
input_report_abs(ts->input,
|
|
ABS_Y, st_y1);
|
|
input_report_abs(ts->input,
|
|
ABS_PRESSURE, st_z1);
|
|
input_report_key(ts->input,
|
|
BTN_TOUCH,
|
|
CY_TCH);
|
|
input_report_abs(ts->input,
|
|
ABS_TOOL_WIDTH,
|
|
curr_tool_width);
|
|
cyttsp_debug("ST->F1:%3d X:%3d Y:%3d Z:%3d\n", \
|
|
cur_st_tch[CY_ST_FNGR1_IDX], \
|
|
st_x1, st_y1, st_z1);
|
|
} else {
|
|
input_report_abs(ts->input, ABS_PRESSURE, CY_NTCH);
|
|
input_report_key(ts->input, BTN_TOUCH, CY_NTCH);
|
|
}
|
|
/* update platform data for the current single touch info */
|
|
ts->prv_st_tch[CY_ST_FNGR1_IDX] = cur_st_tch[CY_ST_FNGR1_IDX];
|
|
ts->prv_st_tch[CY_ST_FNGR2_IDX] = cur_st_tch[CY_ST_FNGR2_IDX];
|
|
|
|
}
|
|
|
|
/* handle Multi-touch signals */
|
|
if (ts->platform_data->use_mt) {
|
|
if (ts->platform_data->use_trk_id) {
|
|
/* terminate any previous touch where the track
|
|
* is missing from the current event */
|
|
for (id = 0; id < CY_NUM_TRK_ID; id++) {
|
|
if ((ts->act_trk[id] != CY_NTCH) &&
|
|
(cur_trk[id] == CY_NTCH)) {
|
|
input_report_abs(ts->input,
|
|
ABS_MT_TRACKING_ID,
|
|
id);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_TOUCH_MAJOR,
|
|
CY_NTCH);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_WIDTH_MAJOR,
|
|
curr_tool_width);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_POSITION_X,
|
|
ts->prv_mt_pos[id][CY_XPOS]);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_POSITION_Y,
|
|
ts->prv_mt_pos[id][CY_YPOS]);
|
|
CY_MT_SYNC(ts->input);
|
|
ts->act_trk[id] = CY_NTCH;
|
|
ts->prv_mt_pos[id][CY_XPOS] = 0;
|
|
ts->prv_mt_pos[id][CY_YPOS] = 0;
|
|
}
|
|
}
|
|
/* set Multi-Touch current event signals */
|
|
for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
|
|
if (cur_mt_tch[id] < CY_NUM_TRK_ID) {
|
|
input_report_abs(ts->input,
|
|
ABS_MT_TRACKING_ID,
|
|
cur_mt_tch[id]);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_TOUCH_MAJOR,
|
|
cur_mt_z[id]);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_WIDTH_MAJOR,
|
|
curr_tool_width);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_POSITION_X,
|
|
cur_mt_pos[id][CY_XPOS]);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_POSITION_Y,
|
|
cur_mt_pos[id][CY_YPOS]);
|
|
CY_MT_SYNC(ts->input);
|
|
ts->act_trk[id] = CY_TCH;
|
|
ts->prv_mt_pos[id][CY_XPOS] =
|
|
cur_mt_pos[id][CY_XPOS];
|
|
ts->prv_mt_pos[id][CY_YPOS] =
|
|
cur_mt_pos[id][CY_YPOS];
|
|
}
|
|
}
|
|
} else {
|
|
/* set temporary track array elements to voids */
|
|
for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
|
|
tmp_trk[id] = CY_IGNR_TCH;
|
|
snd_trk[id] = CY_IGNR_TCH;
|
|
}
|
|
|
|
/* get what is currently active */
|
|
for (i = 0, id = 0;
|
|
id < CY_NUM_TRK_ID && i < CY_NUM_MT_TCH_ID;
|
|
id++) {
|
|
if (cur_trk[id] == CY_TCH) {
|
|
/* only incr counter if track found */
|
|
tmp_trk[i] = id;
|
|
i++;
|
|
}
|
|
}
|
|
cyttsp_xdebug("T1: t0=%d, t1=%d, t2=%d, t3=%d\n", \
|
|
tmp_trk[0], tmp_trk[1], tmp_trk[2], \
|
|
tmp_trk[3]);
|
|
cyttsp_xdebug("T1: p0=%d, p1=%d, p2=%d, p3=%d\n", \
|
|
ts->prv_mt_tch[0], ts->prv_mt_tch[1], \
|
|
ts->prv_mt_tch[2], ts->prv_mt_tch[3]);
|
|
|
|
/* pack in still active previous touches */
|
|
for (id = 0, prv_tch = 0;
|
|
id < CY_NUM_MT_TCH_ID; id++) {
|
|
if (tmp_trk[id] < CY_NUM_TRK_ID) {
|
|
if (cyttsp_inlist(ts->prv_mt_tch,
|
|
tmp_trk[id], &loc,
|
|
CY_NUM_MT_TCH_ID)) {
|
|
loc &= CY_NUM_MT_TCH_ID - 1;
|
|
snd_trk[loc] = tmp_trk[id];
|
|
prv_tch++;
|
|
cyttsp_xdebug("inlist s[%d]=%d t[%d]=%d l=%d p=%d\n", \
|
|
loc, snd_trk[loc], \
|
|
id, tmp_trk[id], \
|
|
loc, prv_tch);
|
|
} else {
|
|
cyttsp_xdebug("not inlist s[%d]=%d t[%d]=%d l=%d \n", \
|
|
id, snd_trk[id], \
|
|
id, tmp_trk[id], \
|
|
loc);
|
|
}
|
|
}
|
|
}
|
|
cyttsp_xdebug("S1: s0=%d, s1=%d, s2=%d, s3=%d p=%d\n", \
|
|
snd_trk[0], snd_trk[1], snd_trk[2], \
|
|
snd_trk[3], prv_tch);
|
|
|
|
/* pack in new touches */
|
|
for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
|
|
if (tmp_trk[id] < CY_NUM_TRK_ID) {
|
|
if (!cyttsp_inlist(snd_trk, tmp_trk[id], &loc, CY_NUM_MT_TCH_ID)) {
|
|
cyttsp_xdebug("not inlist t[%d]=%d l=%d\n", \
|
|
id, tmp_trk[id], loc);
|
|
if (cyttsp_next_avail_inlist(snd_trk, &loc, CY_NUM_MT_TCH_ID)) {
|
|
loc &= CY_NUM_MT_TCH_ID - 1;
|
|
snd_trk[loc] = tmp_trk[id];
|
|
cyttsp_xdebug("put inlist s[%d]=%d t[%d]=%d\n",
|
|
loc, snd_trk[loc], id, tmp_trk[id]);
|
|
}
|
|
} else {
|
|
cyttsp_xdebug("is in list s[%d]=%d t[%d]=%d loc=%d\n", \
|
|
id, snd_trk[id], id, tmp_trk[id], loc);
|
|
}
|
|
}
|
|
}
|
|
cyttsp_xdebug("S2: s0=%d, s1=%d, s2=%d, s3=%d\n", \
|
|
snd_trk[0], snd_trk[1],
|
|
snd_trk[2], snd_trk[3]);
|
|
|
|
/* sync motion event signals for each current touch */
|
|
for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
|
|
/* z will either be 0 (NOTOUCH) or
|
|
* some pressure (TOUCH) */
|
|
cyttsp_xdebug("MT0 prev[%d]=%d temp[%d]=%d send[%d]=%d\n", \
|
|
id, ts->prv_mt_tch[id], \
|
|
id, tmp_trk[id], \
|
|
id, snd_trk[id]);
|
|
if (snd_trk[id] < CY_NUM_TRK_ID) {
|
|
input_mt_slot(ts->input, snd_trk[id]);
|
|
input_mt_report_slot_state(ts->input,
|
|
MT_TOOL_FINGER, true);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_TOUCH_MAJOR,
|
|
cur_mt_z[snd_trk[id]]);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_WIDTH_MAJOR,
|
|
curr_tool_width);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_POSITION_X,
|
|
cur_mt_pos[snd_trk[id]][CY_XPOS]);
|
|
input_report_abs(ts->input,
|
|
ABS_MT_POSITION_Y,
|
|
cur_mt_pos[snd_trk[id]][CY_YPOS]);
|
|
cyttsp_debug("MT1->TID:%2d X:%3d Y:%3d Z:%3d touch-sent\n", \
|
|
snd_trk[id], \
|
|
cur_mt_pos[snd_trk[id]][CY_XPOS], \
|
|
cur_mt_pos[snd_trk[id]][CY_YPOS], \
|
|
cur_mt_z[snd_trk[id]]);
|
|
} else if (ts->prv_mt_tch[id] < CY_NUM_TRK_ID) {
|
|
/* void out this touch */
|
|
input_mt_slot(ts->input,
|
|
ts->prv_mt_tch[id]);
|
|
input_mt_report_slot_state(ts->input,
|
|
MT_TOOL_FINGER, false);
|
|
cyttsp_debug("MT2->TID:%2d X:%3d Y:%3d Z:%3d lift off-sent\n", \
|
|
ts->prv_mt_tch[id], \
|
|
ts->prv_mt_pos[ts->prv_mt_tch[id]][CY_XPOS], \
|
|
ts->prv_mt_pos[ts->prv_mt_tch[id]][CY_YPOS], \
|
|
CY_NTCH);
|
|
} else {
|
|
/* do not stuff any signals for this
|
|
* previously and currently
|
|
* void touches */
|
|
cyttsp_xdebug("MT3->send[%d]=%d - No touch - NOT sent\n", \
|
|
id, snd_trk[id]);
|
|
}
|
|
}
|
|
|
|
/* save current posted tracks to
|
|
* previous track memory */
|
|
for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
|
|
ts->prv_mt_tch[id] = snd_trk[id];
|
|
if (snd_trk[id] < CY_NUM_TRK_ID) {
|
|
ts->prv_mt_pos[snd_trk[id]][CY_XPOS] =
|
|
cur_mt_pos[snd_trk[id]][CY_XPOS];
|
|
ts->prv_mt_pos[snd_trk[id]][CY_YPOS] =
|
|
cur_mt_pos[snd_trk[id]][CY_YPOS];
|
|
cyttsp_xdebug("MT4->TID:%2d X:%3d Y:%3d Z:%3d save for previous\n", \
|
|
snd_trk[id], \
|
|
ts->prv_mt_pos[snd_trk[id]][CY_XPOS], \
|
|
ts->prv_mt_pos[snd_trk[id]][CY_YPOS], \
|
|
CY_NTCH);
|
|
}
|
|
}
|
|
for (id = 0; id < CY_NUM_TRK_ID; id++)
|
|
ts->act_trk[id] = CY_NTCH;
|
|
for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
|
|
if (snd_trk[id] < CY_NUM_TRK_ID)
|
|
ts->act_trk[snd_trk[id]] = CY_TCH;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* handle gestures */
|
|
if (ts->platform_data->use_gestures) {
|
|
if (g_xy_data.gest_id) {
|
|
input_report_key(ts->input,
|
|
BTN_3, CY_TCH);
|
|
input_report_abs(ts->input,
|
|
ABS_HAT1X, g_xy_data.gest_id);
|
|
input_report_abs(ts->input,
|
|
ABS_HAT2Y, g_xy_data.gest_cnt);
|
|
}
|
|
}
|
|
|
|
/* signal the view motion event */
|
|
input_sync(ts->input);
|
|
|
|
for (id = 0; id < CY_NUM_TRK_ID; id++) {
|
|
/* update platform data for the current MT information */
|
|
ts->act_trk[id] = cur_trk[id];
|
|
}
|
|
|
|
exit_xy_handler:
|
|
/* restart event timer */
|
|
if (ts->client->irq == 0)
|
|
mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);
|
|
return;
|
|
}
|
|
|
|
static int cyttsp_inlist(u16 prev_track[], u8 cur_trk_id,
|
|
u8 *prev_loc, u8 num_touches)
|
|
{
|
|
u8 id = 0;
|
|
|
|
*prev_loc = CY_IGNR_TCH;
|
|
|
|
cyttsp_xdebug("IN p[%d]=%d c=%d n=%d loc=%d\n", \
|
|
id, prev_track[id], cur_trk_id, \
|
|
num_touches, *prev_loc);
|
|
for (id = 0, *prev_loc = CY_IGNR_TCH;
|
|
(id < num_touches); id++) {
|
|
cyttsp_xdebug("p[%d]=%d c=%d n=%d loc=%d\n", \
|
|
id, prev_track[id], cur_trk_id, \
|
|
num_touches, *prev_loc);
|
|
if (prev_track[id] == cur_trk_id) {
|
|
*prev_loc = id;
|
|
break;
|
|
}
|
|
}
|
|
cyttsp_xdebug("OUT p[%d]=%d c=%d n=%d loc=%d\n", \
|
|
id, prev_track[id], cur_trk_id, num_touches, *prev_loc);
|
|
|
|
return ((*prev_loc < CY_NUM_TRK_ID) ? true : false);
|
|
}
|
|
|
|
static int cyttsp_next_avail_inlist(u16 cur_trk[],
|
|
u8 *new_loc, u8 num_touches)
|
|
{
|
|
u8 id;
|
|
|
|
for (id = 0, *new_loc = CY_IGNR_TCH;
|
|
(id < num_touches); id++) {
|
|
if (cur_trk[id] > CY_NUM_TRK_ID) {
|
|
*new_loc = id;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ((*new_loc < CY_NUM_TRK_ID) ? true : false);
|
|
}
|
|
|
|
/* Timer function used as dummy interrupt driver */
|
|
static void cyttsp_timer(unsigned long handle)
|
|
{
|
|
struct cyttsp *ts = (struct cyttsp *) handle;
|
|
|
|
cyttsp_xdebug("TTSP Device timer event\n");
|
|
|
|
/* schedule motion signal handling */
|
|
cyttsp_xy_handler(ts);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
|
|
/* ************************************************************************
|
|
* ISR function. This function is general, initialized in drivers init
|
|
* function
|
|
* ************************************************************************ */
|
|
static irqreturn_t cyttsp_irq(int irq, void *handle)
|
|
{
|
|
struct cyttsp *ts = (struct cyttsp *) handle;
|
|
|
|
cyttsp_xdebug("%s: Got IRQ\n", CY_I2C_NAME);
|
|
|
|
cyttsp_xy_handler(ts);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* ************************************************************************
|
|
* Probe initialization functions
|
|
* ************************************************************************ */
|
|
static int cyttsp_putbl(struct cyttsp *ts, int show,
|
|
int show_status, int show_version, int show_cid)
|
|
{
|
|
int retval = CY_OK;
|
|
|
|
int num_bytes = (show_status * 3) + (show_version * 6) + (show_cid * 3);
|
|
|
|
if (show_cid)
|
|
num_bytes = sizeof(struct cyttsp_bootloader_data_t);
|
|
else if (show_version)
|
|
num_bytes = sizeof(struct cyttsp_bootloader_data_t) - 3;
|
|
else
|
|
num_bytes = sizeof(struct cyttsp_bootloader_data_t) - 9;
|
|
|
|
if (show) {
|
|
retval = i2c_smbus_read_i2c_block_data(ts->client,
|
|
CY_REG_BASE, num_bytes, (u8 *)&g_bl_data);
|
|
if (show_status) {
|
|
cyttsp_debug("BL%d: f=%02X s=%02X err=%02X bl=%02X%02X bld=%02X%02X\n", \
|
|
show, \
|
|
g_bl_data.bl_file, \
|
|
g_bl_data.bl_status, \
|
|
g_bl_data.bl_error, \
|
|
g_bl_data.blver_hi, g_bl_data.blver_lo, \
|
|
g_bl_data.bld_blver_hi, g_bl_data.bld_blver_lo);
|
|
}
|
|
if (show_version) {
|
|
cyttsp_debug("BL%d: ttspver=0x%02X%02X appid=0x%02X%02X appver=0x%02X%02X\n", \
|
|
show, \
|
|
g_bl_data.ttspver_hi, g_bl_data.ttspver_lo, \
|
|
g_bl_data.appid_hi, g_bl_data.appid_lo, \
|
|
g_bl_data.appver_hi, g_bl_data.appver_lo);
|
|
}
|
|
if (show_cid) {
|
|
cyttsp_debug("BL%d: cid=0x%02X%02X%02X\n", \
|
|
show, \
|
|
g_bl_data.cid_0, \
|
|
g_bl_data.cid_1, \
|
|
g_bl_data.cid_2);
|
|
}
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
#ifdef CY_INCLUDE_LOAD_FILE
|
|
#define CY_MAX_I2C_LEN 256
|
|
#define CY_MAX_TRY 10
|
|
#define CY_BL_PAGE_SIZE 16
|
|
#define CY_BL_NUM_PAGES 5
|
|
static int cyttsp_i2c_wr_blk_chunks(struct cyttsp *ts, u8 command,
|
|
u8 length, const u8 *values)
|
|
{
|
|
int retval = CY_OK;
|
|
int block = 1;
|
|
|
|
u8 dataray[CY_MAX_I2C_LEN];
|
|
|
|
/* first page already includes the bl page offset */
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
|
|
CY_BL_PAGE_SIZE+1, values);
|
|
values += CY_BL_PAGE_SIZE+1;
|
|
length -= CY_BL_PAGE_SIZE+1;
|
|
|
|
/* rem blocks require bl page offset stuffing */
|
|
while (length &&
|
|
(block < CY_BL_NUM_PAGES) &&
|
|
!(retval < CY_OK)) {
|
|
udelay(43*2); /* TRM * 2 */
|
|
dataray[0] = CY_BL_PAGE_SIZE*block;
|
|
memcpy(&dataray[1], values,
|
|
length >= CY_BL_PAGE_SIZE ?
|
|
CY_BL_PAGE_SIZE : length);
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE,
|
|
length >= CY_BL_PAGE_SIZE ?
|
|
CY_BL_PAGE_SIZE + 1 : length+1, dataray);
|
|
values += CY_BL_PAGE_SIZE;
|
|
length = length >= CY_BL_PAGE_SIZE ?
|
|
length - CY_BL_PAGE_SIZE : 0;
|
|
block++;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int cyttsp_bootload_app(struct cyttsp *ts)
|
|
{
|
|
int retval = CY_OK;
|
|
int i, tries;
|
|
u8 host_reg;
|
|
|
|
cyttsp_debug("load new firmware \n");
|
|
/* reset TTSP Device back to bootloader mode */
|
|
host_reg = CY_SOFT_RESET_MODE;
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
|
|
sizeof(host_reg), &host_reg);
|
|
/* wait for TTSP Device to complete reset back to bootloader */
|
|
tries = 0;
|
|
do {
|
|
usleep_range(1000, 1000);
|
|
cyttsp_putbl(ts, 3, false, false, false);
|
|
} while (g_bl_data.bl_status != 0x10 &&
|
|
g_bl_data.bl_status != 0x11 &&
|
|
tries++ < 100);
|
|
cyttsp_debug("load file - tver=0x%02X%02X a_id=0x%02X%02X aver=0x%02X%02X\n", \
|
|
cyttsp_fw_tts_verh, cyttsp_fw_tts_verl, \
|
|
cyttsp_fw_app_idh, cyttsp_fw_app_idl, \
|
|
cyttsp_fw_app_verh, cyttsp_fw_app_verl);
|
|
|
|
/* download new TTSP Application to the Bootloader */
|
|
if (!(retval < CY_OK)) {
|
|
i = 0;
|
|
/* send bootload initiation command */
|
|
if (cyttsp_fw[i].Command == CY_BL_INIT_LOAD) {
|
|
g_bl_data.bl_file = 0;
|
|
g_bl_data.bl_status = 0;
|
|
g_bl_data.bl_error = 0;
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE,
|
|
cyttsp_fw[i].Length, cyttsp_fw[i].Block);
|
|
/* delay to allow bl to get ready for block writes */
|
|
i++;
|
|
tries = 0;
|
|
do {
|
|
msleep(100);
|
|
cyttsp_putbl(ts, 4, false, false, false);
|
|
} while (g_bl_data.bl_status != 0x10 &&
|
|
g_bl_data.bl_status != 0x11 &&
|
|
tries++ < 100);
|
|
cyttsp_debug("wait init f=%02X, s=%02X, e=%02X t=%d\n", \
|
|
g_bl_data.bl_file, g_bl_data.bl_status, \
|
|
g_bl_data.bl_error, tries);
|
|
/* send bootload firmware load blocks */
|
|
if (!(retval < CY_OK)) {
|
|
while (cyttsp_fw[i].Command == CY_BL_WRITE_BLK) {
|
|
retval = cyttsp_i2c_wr_blk_chunks(ts,
|
|
CY_REG_BASE,
|
|
cyttsp_fw[i].Length,
|
|
cyttsp_fw[i].Block);
|
|
cyttsp_xdebug("BL DNLD Rec=% 3d Len=% 3d Addr=%04X\n", \
|
|
cyttsp_fw[i].Record, \
|
|
cyttsp_fw[i].Length, \
|
|
cyttsp_fw[i].Address);
|
|
i++;
|
|
if (retval < CY_OK) {
|
|
cyttsp_debug("BL fail Rec=%3d retval=%d\n", \
|
|
cyttsp_fw[i-1].Record, \
|
|
retval);
|
|
break;
|
|
} else {
|
|
tries = 0;
|
|
cyttsp_putbl(ts, 5, false, false, false);
|
|
while (!((g_bl_data.bl_status == 0x10) &&
|
|
(g_bl_data.bl_error == 0x20)) &&
|
|
!((g_bl_data.bl_status == 0x11) &&
|
|
(g_bl_data.bl_error == 0x20)) &&
|
|
(tries++ < 100)) {
|
|
usleep_range(1000, 1000);
|
|
cyttsp_putbl(ts, 5, false, false, false);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!(retval < CY_OK)) {
|
|
while (i < cyttsp_fw_records) {
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
|
|
cyttsp_fw[i].Length,
|
|
cyttsp_fw[i].Block);
|
|
i++;
|
|
tries = 0;
|
|
do {
|
|
msleep(100);
|
|
cyttsp_putbl(ts, 6, true, false, false);
|
|
} while (g_bl_data.bl_status != 0x10 &&
|
|
g_bl_data.bl_status != 0x11 &&
|
|
tries++ < 100);
|
|
cyttsp_debug("wait term f=%02X, s=%02X, e=%02X t=%d\n", \
|
|
g_bl_data.bl_file, \
|
|
g_bl_data.bl_status, \
|
|
g_bl_data.bl_error, \
|
|
tries);
|
|
if (retval < CY_OK)
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* reset TTSP Device back to bootloader mode */
|
|
host_reg = CY_SOFT_RESET_MODE;
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
|
|
sizeof(host_reg), &host_reg);
|
|
/* wait for TTSP Device to complete reset back to bootloader */
|
|
tries = 0;
|
|
do {
|
|
usleep_range(1000, 1000);
|
|
cyttsp_putbl(ts, 3, false, false, false);
|
|
} while (g_bl_data.bl_status != 0x10 &&
|
|
g_bl_data.bl_status != 0x11 &&
|
|
tries++ < 100);
|
|
|
|
/* set arg2 to non-0 to activate */
|
|
retval = cyttsp_putbl(ts, 8, true, true, true);
|
|
|
|
return retval;
|
|
}
|
|
#else
|
|
static int cyttsp_bootload_app(struct cyttsp *ts)
|
|
{
|
|
cyttsp_debug("no-load new firmware \n");
|
|
return CY_OK;
|
|
}
|
|
#endif /* CY_INCLUDE_LOAD_FILE */
|
|
|
|
|
|
static int cyttsp_power_on(struct cyttsp *ts)
|
|
{
|
|
int retval = CY_OK;
|
|
u8 host_reg;
|
|
int tries;
|
|
|
|
cyttsp_debug("Power up \n");
|
|
|
|
/* check if the TTSP device has a bootloader installed */
|
|
host_reg = CY_SOFT_RESET_MODE;
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
|
|
sizeof(host_reg), &host_reg);
|
|
tries = 0;
|
|
do {
|
|
usleep_range(1000, 1000);
|
|
|
|
/* set arg2 to non-0 to activate */
|
|
retval = cyttsp_putbl(ts, 1, true, true, true);
|
|
cyttsp_info("BL%d: f=%02X s=%02X err=%02X bl=%02X%02X bld=%02X%02X R=%d\n", \
|
|
101, \
|
|
g_bl_data.bl_file, g_bl_data.bl_status, \
|
|
g_bl_data.bl_error, \
|
|
g_bl_data.blver_hi, g_bl_data.blver_lo, \
|
|
g_bl_data.bld_blver_hi, g_bl_data.bld_blver_lo,
|
|
retval);
|
|
cyttsp_info("BL%d: tver=%02X%02X a_id=%02X%02X aver=%02X%02X\n", \
|
|
102, \
|
|
g_bl_data.ttspver_hi, g_bl_data.ttspver_lo, \
|
|
g_bl_data.appid_hi, g_bl_data.appid_lo, \
|
|
g_bl_data.appver_hi, g_bl_data.appver_lo);
|
|
cyttsp_info("BL%d: c_id=%02X%02X%02X\n", \
|
|
103, \
|
|
g_bl_data.cid_0, g_bl_data.cid_1, g_bl_data.cid_2);
|
|
} while (!(retval < CY_OK) &&
|
|
!GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
|
|
!(g_bl_data.bl_file == CY_OP_MODE + CY_LOW_PWR_MODE) &&
|
|
tries++ < 100);
|
|
|
|
/* is bootloader missing? */
|
|
if (!(retval < CY_OK)) {
|
|
cyttsp_xdebug("Ret=%d Check if bootloader is missing...\n", \
|
|
retval);
|
|
if (!GET_BOOTLOADERMODE(g_bl_data.bl_status)) {
|
|
/* skip all bl and sys info and go to op mode */
|
|
if (!(retval < CY_OK)) {
|
|
cyttsp_xdebug("Bl is missing (ret=%d)\n", \
|
|
retval);
|
|
host_reg = CY_OP_MODE/* + CY_LOW_PWR_MODE*/;
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
|
|
sizeof(host_reg), &host_reg);
|
|
/* wait for TTSP Device to complete switch to
|
|
* Operational mode */
|
|
msleep(1000);
|
|
goto bypass;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* take TTSP out of bootloader mode; go to TrueTouch operational mode */
|
|
if (!(retval < CY_OK)) {
|
|
cyttsp_xdebug1("exit bootloader; go operational\n");
|
|
tries = 0;
|
|
do {
|
|
msleep(100);
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE, sizeof(bl_cmd), bl_cmd);
|
|
if (retval == CY_OK)
|
|
break;
|
|
} while (tries++ < 5);
|
|
|
|
if (retval == CY_OK) {
|
|
tries = 0;
|
|
do {
|
|
msleep(100);
|
|
cyttsp_putbl(ts, 4, true, false, false);
|
|
cyttsp_info("BL%d: f=%02X s=%02X err=%02X" \
|
|
"bl=%02X%02X bld=%02X%02X\n", 104, \
|
|
g_bl_data.bl_file, \
|
|
g_bl_data.bl_status, \
|
|
g_bl_data.bl_error, \
|
|
g_bl_data.blver_hi, \
|
|
g_bl_data.blver_lo, \
|
|
g_bl_data.bld_blver_hi, \
|
|
g_bl_data.bld_blver_lo);
|
|
} while (GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
|
|
tries++ < 5);
|
|
}
|
|
}
|
|
|
|
if (!(retval < CY_OK) &&
|
|
cyttsp_app_load()) {
|
|
if (CY_DIFF(g_bl_data.ttspver_hi, cyttsp_tts_verh()) ||
|
|
CY_DIFF(g_bl_data.ttspver_lo, cyttsp_tts_verl()) ||
|
|
CY_DIFF(g_bl_data.appid_hi, cyttsp_app_idh()) ||
|
|
CY_DIFF(g_bl_data.appid_lo, cyttsp_app_idl()) ||
|
|
CY_DIFF(g_bl_data.appver_hi, cyttsp_app_verh()) ||
|
|
CY_DIFF(g_bl_data.appver_lo, cyttsp_app_verl()) ||
|
|
CY_DIFF(g_bl_data.cid_0, cyttsp_cid_0()) ||
|
|
CY_DIFF(g_bl_data.cid_1, cyttsp_cid_1()) ||
|
|
CY_DIFF(g_bl_data.cid_2, cyttsp_cid_2()) ||
|
|
cyttsp_force_fw_load()) {
|
|
cyttsp_debug("blttsp=0x%02X%02X flttsp=0x%02X%02X force=%d\n", \
|
|
g_bl_data.ttspver_hi, g_bl_data.ttspver_lo, \
|
|
cyttsp_tts_verh(), cyttsp_tts_verl(), \
|
|
cyttsp_force_fw_load());
|
|
cyttsp_debug("blappid=0x%02X%02X flappid=0x%02X%02X\n", \
|
|
g_bl_data.appid_hi, g_bl_data.appid_lo, \
|
|
cyttsp_app_idh(), cyttsp_app_idl());
|
|
cyttsp_debug("blappver=0x%02X%02X flappver=0x%02X%02X\n", \
|
|
g_bl_data.appver_hi, g_bl_data.appver_lo, \
|
|
cyttsp_app_verh(), cyttsp_app_verl());
|
|
cyttsp_debug("blcid=0x%02X%02X%02X flcid=0x%02X%02X%02X\n", \
|
|
g_bl_data.cid_0, \
|
|
g_bl_data.cid_1, \
|
|
g_bl_data.cid_2, \
|
|
cyttsp_cid_0(), \
|
|
cyttsp_cid_1(), \
|
|
cyttsp_cid_2());
|
|
/* enter bootloader to load new app into TTSP Device */
|
|
retval = cyttsp_bootload_app(ts);
|
|
/* take TTSP device out of bootloader mode;
|
|
* switch back to TrueTouch operational mode */
|
|
if (!(retval < CY_OK)) {
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE,
|
|
sizeof(bl_cmd), bl_cmd);
|
|
/* wait for TTSP Device to complete
|
|
* switch to Operational mode */
|
|
tries = 0;
|
|
do {
|
|
msleep(100);
|
|
cyttsp_putbl(ts, 9, false, false, false);
|
|
} while (GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
|
|
tries++ < 100);
|
|
cyttsp_putbl(ts, 9, true, false, false);
|
|
}
|
|
}
|
|
}
|
|
|
|
bypass:
|
|
/* switch to System Information mode to read versions
|
|
* and set interval registers */
|
|
if (!(retval < CY_OK)) {
|
|
cyttsp_debug("switch to sysinfo mode\n");
|
|
host_reg = CY_SYSINFO_MODE;
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE, sizeof(host_reg), &host_reg);
|
|
/* wait for TTSP Device to complete switch to SysInfo mode */
|
|
msleep(100);
|
|
if (!(retval < CY_OK)) {
|
|
retval = i2c_smbus_read_i2c_block_data(ts->client,
|
|
CY_REG_BASE,
|
|
sizeof(struct cyttsp_sysinfo_data_t),
|
|
(u8 *)&g_sysinfo_data);
|
|
cyttsp_debug("SI2: hst_mode=0x%02X mfg_cmd=0x%02X"\
|
|
"mfg_stat=0x%02X\n",
|
|
g_sysinfo_data.hst_mode,
|
|
g_sysinfo_data.mfg_cmd,
|
|
g_sysinfo_data.mfg_stat);
|
|
cyttsp_debug("SI2: bl_ver=0x%02X%02X\n",
|
|
g_sysinfo_data.bl_verh,
|
|
g_sysinfo_data.bl_verl);
|
|
pr_debug("SI2: sysinfo act_int=0x%02X tch_tmout=0x%02X lp_int=0x%02X\n",
|
|
g_sysinfo_data.act_intrvl,
|
|
g_sysinfo_data.tch_tmout,
|
|
g_sysinfo_data.lp_intrvl);
|
|
pr_info("SI%d: tver=%02X%02X a_id=%02X%02X aver=%02X%02X\n",
|
|
102,
|
|
g_sysinfo_data.tts_verh,
|
|
g_sysinfo_data.tts_verl,
|
|
g_sysinfo_data.app_idh,
|
|
g_sysinfo_data.app_idl,
|
|
g_sysinfo_data.app_verh,
|
|
g_sysinfo_data.app_verl);
|
|
cyttsp_info("SI%d: c_id=%02X%02X%02X\n",
|
|
103,
|
|
g_sysinfo_data.cid[0],
|
|
g_sysinfo_data.cid[1],
|
|
g_sysinfo_data.cid[2]);
|
|
if (!(retval < CY_OK) &&
|
|
(CY_DIFF(ts->platform_data->act_intrvl,
|
|
CY_ACT_INTRVL_DFLT) ||
|
|
CY_DIFF(ts->platform_data->tch_tmout,
|
|
CY_TCH_TMOUT_DFLT) ||
|
|
CY_DIFF(ts->platform_data->lp_intrvl,
|
|
CY_LP_INTRVL_DFLT))) {
|
|
if (!(retval < CY_OK)) {
|
|
u8 intrvl_ray[sizeof(\
|
|
ts->platform_data->act_intrvl) +
|
|
sizeof(\
|
|
ts->platform_data->tch_tmout) +
|
|
sizeof(\
|
|
ts->platform_data->lp_intrvl)];
|
|
u8 i = 0;
|
|
|
|
intrvl_ray[i++] =
|
|
ts->platform_data->act_intrvl;
|
|
intrvl_ray[i++] =
|
|
ts->platform_data->tch_tmout;
|
|
intrvl_ray[i++] =
|
|
ts->platform_data->lp_intrvl;
|
|
|
|
pr_debug("SI2: platinfo act_intrvl=0x%02X tch_tmout=0x%02X lp_intrvl=0x%02X\n",
|
|
ts->platform_data->act_intrvl,
|
|
ts->platform_data->tch_tmout,
|
|
ts->platform_data->lp_intrvl);
|
|
/* set intrvl registers */
|
|
retval = i2c_smbus_write_i2c_block_data(
|
|
ts->client,
|
|
CY_REG_ACT_INTRVL,
|
|
sizeof(intrvl_ray), intrvl_ray);
|
|
msleep(CY_DLY_SYSINFO);
|
|
}
|
|
}
|
|
}
|
|
/* switch back to Operational mode */
|
|
cyttsp_debug("switch back to operational mode\n");
|
|
if (!(retval < CY_OK)) {
|
|
host_reg = CY_OP_MODE/* + CY_LOW_PWR_MODE*/;
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE,
|
|
sizeof(host_reg), &host_reg);
|
|
/* wait for TTSP Device to complete
|
|
* switch to Operational mode */
|
|
msleep(100);
|
|
}
|
|
}
|
|
/* init gesture setup;
|
|
* this is required even if not using gestures
|
|
* in order to set the active distance */
|
|
if (!(retval < CY_OK)) {
|
|
u8 gesture_setup;
|
|
cyttsp_debug("init gesture setup\n");
|
|
gesture_setup = ts->platform_data->gest_set;
|
|
retval = i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_GEST_SET,
|
|
sizeof(gesture_setup), &gesture_setup);
|
|
msleep(CY_DLY_DFLT);
|
|
}
|
|
|
|
if (!(retval < CY_OK))
|
|
ts->platform_data->power_state = CY_ACTIVE_STATE;
|
|
else
|
|
ts->platform_data->power_state = CY_IDLE_STATE;
|
|
|
|
cyttsp_debug("Retval=%d Power state is %s\n", \
|
|
retval, \
|
|
ts->platform_data->power_state == CY_ACTIVE_STATE ? \
|
|
"ACTIVE" : "IDLE");
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int cyttsp_power_device(struct cyttsp *ts, bool on)
|
|
{
|
|
int rc = 0, i;
|
|
const struct cyttsp_regulator *reg_info =
|
|
ts->platform_data->regulator_info;
|
|
u8 num_reg = ts->platform_data->num_regulators;
|
|
|
|
if (!reg_info) {
|
|
pr_err("regulator pdata not specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (on == false) /* Turn off the regulators */
|
|
goto ts_reg_disable;
|
|
|
|
ts->vdd = kzalloc(num_reg * sizeof(struct regulator *), GFP_KERNEL);
|
|
if (!ts->vdd) {
|
|
pr_err("unable to allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for (i = 0; i < num_reg; i++) {
|
|
ts->vdd[i] = regulator_get(&ts->client->dev, reg_info[i].name);
|
|
if (IS_ERR(ts->vdd[i])) {
|
|
rc = PTR_ERR(ts->vdd[i]);
|
|
pr_err("%s:regulator get failed rc=%d\n",
|
|
__func__, rc);
|
|
goto error_vdd;
|
|
}
|
|
|
|
if (regulator_count_voltages(ts->vdd[i]) > 0) {
|
|
rc = regulator_set_voltage(ts->vdd[i],
|
|
reg_info[i].min_uV, reg_info[i].max_uV);
|
|
if (rc) {
|
|
pr_err("%s: regulator_set_voltage"
|
|
"failed rc =%d\n", __func__, rc);
|
|
regulator_put(ts->vdd[i]);
|
|
goto error_vdd;
|
|
}
|
|
|
|
rc = regulator_set_optimum_mode(ts->vdd[i],
|
|
reg_info[i].hpm_load_uA);
|
|
if (rc < 0) {
|
|
pr_err("%s: regulator_set_optimum_mode failed "
|
|
"rc=%d\n", __func__, rc);
|
|
|
|
regulator_set_voltage(ts->vdd[i], 0,
|
|
reg_info[i].max_uV);
|
|
regulator_put(ts->vdd[i]);
|
|
goto error_vdd;
|
|
}
|
|
}
|
|
|
|
rc = regulator_enable(ts->vdd[i]);
|
|
if (rc) {
|
|
pr_err("%s: regulator_enable failed rc =%d\n",
|
|
__func__, rc);
|
|
if (regulator_count_voltages(ts->vdd[i]) > 0) {
|
|
regulator_set_optimum_mode(ts->vdd[i], 0);
|
|
regulator_set_voltage(ts->vdd[i], 0,
|
|
reg_info[i].max_uV);
|
|
}
|
|
regulator_put(ts->vdd[i]);
|
|
goto error_vdd;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
|
|
ts_reg_disable:
|
|
i = ts->platform_data->num_regulators;
|
|
error_vdd:
|
|
while (--i >= 0) {
|
|
if (regulator_count_voltages(ts->vdd[i]) > 0) {
|
|
regulator_set_voltage(ts->vdd[i], 0,
|
|
reg_info[i].max_uV);
|
|
regulator_set_optimum_mode(ts->vdd[i], 0);
|
|
}
|
|
regulator_disable(ts->vdd[i]);
|
|
regulator_put(ts->vdd[i]);
|
|
}
|
|
kfree(ts->vdd);
|
|
return rc;
|
|
}
|
|
|
|
/* cyttsp_initialize: Driver Initialization. This function takes
|
|
* care of the following tasks:
|
|
* 1. Create and register an input device with input layer
|
|
* 2. Take CYTTSP device out of bootloader mode; go operational
|
|
* 3. Start any timers/Work queues. */
|
|
static int cyttsp_initialize(struct i2c_client *client, struct cyttsp *ts)
|
|
{
|
|
struct input_dev *input_device;
|
|
int error = 0;
|
|
int retval = CY_OK;
|
|
u8 id;
|
|
|
|
/* Create the input device and register it. */
|
|
input_device = input_allocate_device();
|
|
if (!input_device) {
|
|
error = -ENOMEM;
|
|
cyttsp_xdebug1("err input allocate device\n");
|
|
goto error_free_device;
|
|
}
|
|
|
|
if (!client) {
|
|
error = ~ENODEV;
|
|
cyttsp_xdebug1("err client is Null\n");
|
|
goto error_free_device;
|
|
}
|
|
|
|
if (!ts) {
|
|
error = ~ENODEV;
|
|
cyttsp_xdebug1("err context is Null\n");
|
|
goto error_free_device;
|
|
}
|
|
|
|
ts->input = input_device;
|
|
input_device->name = CY_I2C_NAME;
|
|
input_device->phys = ts->phys;
|
|
input_device->dev.parent = &client->dev;
|
|
|
|
/* init the touch structures */
|
|
ts->num_prv_st_tch = CY_NTCH;
|
|
for (id = 0; id < CY_NUM_TRK_ID; id++) {
|
|
ts->act_trk[id] = CY_NTCH;
|
|
ts->prv_mt_pos[id][CY_XPOS] = 0;
|
|
ts->prv_mt_pos[id][CY_YPOS] = 0;
|
|
}
|
|
|
|
for (id = 0; id < CY_NUM_MT_TCH_ID; id++)
|
|
ts->prv_mt_tch[id] = CY_IGNR_TCH;
|
|
|
|
for (id = 0; id < CY_NUM_ST_TCH_ID; id++)
|
|
ts->prv_st_tch[id] = CY_IGNR_TCH;
|
|
|
|
set_bit(EV_SYN, input_device->evbit);
|
|
set_bit(EV_KEY, input_device->evbit);
|
|
set_bit(EV_ABS, input_device->evbit);
|
|
set_bit(BTN_TOUCH, input_device->keybit);
|
|
set_bit(INPUT_PROP_DIRECT, input_device->propbit);
|
|
|
|
if (ts->platform_data->use_gestures)
|
|
set_bit(BTN_3, input_device->keybit);
|
|
|
|
input_set_abs_params(input_device, ABS_X, ts->platform_data->disp_minx,
|
|
ts->platform_data->disp_maxx, 0, 0);
|
|
input_set_abs_params(input_device, ABS_Y, ts->platform_data->disp_miny,
|
|
ts->platform_data->disp_maxy, 0, 0);
|
|
input_set_abs_params(input_device,
|
|
ABS_TOOL_WIDTH, 0, CY_LARGE_TOOL_WIDTH, 0 , 0);
|
|
input_set_abs_params(input_device,
|
|
ABS_PRESSURE, 0, CY_MAXZ, 0, 0);
|
|
if (ts->platform_data->use_gestures) {
|
|
input_set_abs_params(input_device,
|
|
ABS_HAT1X, 0, CY_MAXZ, 0, 0);
|
|
input_set_abs_params(input_device,
|
|
ABS_HAT1Y, 0, CY_MAXZ, 0, 0);
|
|
}
|
|
if (ts->platform_data->use_mt) {
|
|
input_set_abs_params(input_device, ABS_MT_POSITION_X,
|
|
ts->platform_data->disp_minx,
|
|
ts->platform_data->disp_maxx, 0, 0);
|
|
input_set_abs_params(input_device, ABS_MT_POSITION_Y,
|
|
ts->platform_data->disp_miny,
|
|
ts->platform_data->disp_maxy, 0, 0);
|
|
input_set_abs_params(input_device,
|
|
ABS_MT_TOUCH_MAJOR, 0, CY_MAXZ, 0, 0);
|
|
input_set_abs_params(input_device,
|
|
ABS_MT_WIDTH_MAJOR, 0, CY_LARGE_TOOL_WIDTH, 0, 0);
|
|
input_mt_init_slots(input_device, CY_NUM_TRK_ID);
|
|
if (ts->platform_data->use_trk_id) {
|
|
input_set_abs_params(input_device,
|
|
ABS_MT_TRACKING_ID, 0, CY_NUM_TRK_ID, 0, 0);
|
|
}
|
|
}
|
|
|
|
/* set dummy key to make driver work with virtual keys */
|
|
input_set_capability(input_device, EV_KEY, KEY_PROG1);
|
|
|
|
cyttsp_info("%s: Register input device\n", CY_I2C_NAME);
|
|
error = input_register_device(input_device);
|
|
if (error) {
|
|
cyttsp_alert("%s: Failed to register input device\n", \
|
|
CY_I2C_NAME);
|
|
retval = error;
|
|
goto error_free_device;
|
|
}
|
|
|
|
if (gpio_is_valid(ts->platform_data->resout_gpio)) {
|
|
/* configure touchscreen reset out gpio */
|
|
retval = gpio_request(ts->platform_data->resout_gpio,
|
|
"cyttsp_resout_gpio");
|
|
if (retval) {
|
|
pr_err("%s: unable to request reset gpio %d\n",
|
|
__func__, ts->platform_data->resout_gpio);
|
|
goto error_free_device;
|
|
}
|
|
|
|
retval = gpio_direction_output(
|
|
ts->platform_data->resout_gpio, 1);
|
|
if (retval) {
|
|
pr_err("%s: unable to set direction for gpio %d\n",
|
|
__func__, ts->platform_data->resout_gpio);
|
|
goto error_resout_gpio_dir;
|
|
}
|
|
}
|
|
|
|
if (gpio_is_valid(ts->platform_data->sleep_gpio)) {
|
|
/* configure touchscreen reset out gpio */
|
|
retval = gpio_request(ts->platform_data->sleep_gpio,
|
|
"cy8c_sleep_gpio");
|
|
if (retval) {
|
|
pr_err("%s: unable to request sleep gpio %d\n",
|
|
__func__, ts->platform_data->sleep_gpio);
|
|
goto error_sleep_gpio_req;
|
|
}
|
|
|
|
retval = gpio_direction_output(
|
|
ts->platform_data->sleep_gpio, 0);
|
|
if (retval) {
|
|
pr_err("%s: unable to set direction for gpio %d\n",
|
|
__func__, ts->platform_data->resout_gpio);
|
|
goto error_sleep_gpio_dir;
|
|
}
|
|
}
|
|
|
|
if (gpio_is_valid(ts->platform_data->irq_gpio)) {
|
|
/* configure touchscreen irq gpio */
|
|
retval = gpio_request(ts->platform_data->irq_gpio,
|
|
"ts_irq_gpio");
|
|
if (retval) {
|
|
pr_err("%s: unable to request gpio [%d]\n", __func__,
|
|
ts->platform_data->irq_gpio);
|
|
goto error_irq_gpio_req;
|
|
}
|
|
retval = gpio_direction_input(ts->platform_data->irq_gpio);
|
|
if (retval) {
|
|
pr_err("%s: unable to set_direction for gpio [%d]\n",
|
|
__func__, ts->platform_data->irq_gpio);
|
|
goto error_irq_gpio_dir;
|
|
}
|
|
}
|
|
|
|
if (ts->platform_data->regulator_info) {
|
|
retval = cyttsp_power_device(ts, true);
|
|
if (retval) {
|
|
pr_err("%s: Unable to power device %d\n",
|
|
__func__, retval);
|
|
goto error_irq_gpio_dir;
|
|
}
|
|
}
|
|
|
|
/* Power on the chip and make sure that I/Os are set as specified
|
|
* in the platform */
|
|
if (ts->platform_data->init) {
|
|
retval = ts->platform_data->init(client);
|
|
if (retval) {
|
|
pr_err("%s: ts init failed\n", __func__);
|
|
goto error_power_device;
|
|
}
|
|
}
|
|
|
|
msleep(100);
|
|
|
|
/* check this device active by reading first byte/register */
|
|
retval = i2c_smbus_read_byte_data(ts->client, 0x01);
|
|
if (retval < 0) {
|
|
pr_err("%s: i2c sanity check failed\n", __func__);
|
|
goto error_power_device;
|
|
}
|
|
|
|
retval = cyttsp_power_on(ts);
|
|
if (retval < 0) {
|
|
pr_err("%s: cyttsp_power_on failed\n", __func__);
|
|
goto error_power_device;
|
|
}
|
|
|
|
/* Timer or Interrupt setup */
|
|
if (ts->client->irq == 0) {
|
|
cyttsp_info("Setting up timer\n");
|
|
setup_timer(&ts->timer, cyttsp_timer, (unsigned long) ts);
|
|
mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);
|
|
} else {
|
|
cyttsp_info("Setting up interrupt\n");
|
|
error = request_threaded_irq(client->irq, NULL, cyttsp_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
client->dev.driver->name, ts);
|
|
if (error) {
|
|
cyttsp_alert("error: could not request irq\n");
|
|
retval = error;
|
|
goto error_power_device;
|
|
}
|
|
}
|
|
|
|
irq_cnt = 0;
|
|
irq_cnt_total = 0;
|
|
irq_err_cnt = 0;
|
|
|
|
atomic_set(&ts->irq_enabled, 1);
|
|
retval = device_create_file(&ts->client->dev, &dev_attr_irq_enable);
|
|
if (retval < CY_OK) {
|
|
cyttsp_alert("File device creation failed: %d\n", retval);
|
|
retval = -ENODEV;
|
|
goto error_free_irq;
|
|
}
|
|
|
|
retval = device_create_file(&client->dev, &dev_attr_cyttsp_fw_ver);
|
|
if (retval) {
|
|
cyttsp_alert("sysfs entry for firmware version failed\n");
|
|
goto error_rm_dev_file_irq_en;
|
|
}
|
|
|
|
ts->cyttsp_fwloader_mode = 0;
|
|
retval = device_create_file(&client->dev, &dev_attr_cyttsp_update_fw);
|
|
if (retval) {
|
|
cyttsp_alert("sysfs entry for firmware update failed\n");
|
|
goto error_rm_dev_file_fw_ver;
|
|
}
|
|
|
|
retval = device_create_file(&client->dev,
|
|
&dev_attr_cyttsp_force_update_fw);
|
|
if (retval) {
|
|
cyttsp_alert("sysfs entry for force firmware update failed\n");
|
|
goto error_rm_dev_file_update_fw;
|
|
}
|
|
if (ts->platform_data->correct_fw_ver) {
|
|
if (g_bl_data.appid_lo != ts->platform_data->correct_fw_ver)
|
|
pr_warn("%s: Invalid firmware version detected;"
|
|
" Please update.\n", __func__);
|
|
}
|
|
|
|
retval = device_create_file(&client->dev,
|
|
&dev_attr_cyttsp_fw_name);
|
|
if (retval) {
|
|
cyttsp_alert("sysfs entry for file name selection failed\n");
|
|
goto error_rm_dev_file_fupdate_fw;
|
|
}
|
|
|
|
cyttsp_info("%s: Successful registration\n", CY_I2C_NAME);
|
|
|
|
goto success;
|
|
|
|
error_rm_dev_file_fupdate_fw:
|
|
device_remove_file(&client->dev, &dev_attr_cyttsp_force_update_fw);
|
|
error_rm_dev_file_update_fw:
|
|
device_remove_file(&client->dev, &dev_attr_cyttsp_update_fw);
|
|
error_rm_dev_file_fw_ver:
|
|
device_remove_file(&client->dev, &dev_attr_cyttsp_fw_ver);
|
|
error_rm_dev_file_irq_en:
|
|
device_remove_file(&client->dev, &dev_attr_irq_enable);
|
|
error_free_irq:
|
|
if (ts->client->irq)
|
|
free_irq(client->irq, ts);
|
|
error_power_device:
|
|
if (ts->platform_data->regulator_info)
|
|
cyttsp_power_device(ts, false);
|
|
error_irq_gpio_dir:
|
|
if (gpio_is_valid(ts->platform_data->irq_gpio))
|
|
gpio_free(ts->platform_data->irq_gpio);
|
|
error_irq_gpio_req:
|
|
if (gpio_is_valid(ts->platform_data->sleep_gpio))
|
|
gpio_direction_output(ts->platform_data->sleep_gpio, 1);
|
|
error_sleep_gpio_dir:
|
|
if (gpio_is_valid(ts->platform_data->sleep_gpio))
|
|
gpio_free(ts->platform_data->sleep_gpio);
|
|
error_sleep_gpio_req:
|
|
if (gpio_is_valid(ts->platform_data->resout_gpio))
|
|
gpio_direction_output(ts->platform_data->resout_gpio, 0);
|
|
error_resout_gpio_dir:
|
|
if (gpio_is_valid(ts->platform_data->resout_gpio))
|
|
gpio_free(ts->platform_data->resout_gpio);
|
|
error_free_device:
|
|
if (input_device)
|
|
input_free_device(input_device);
|
|
|
|
success:
|
|
return retval;
|
|
}
|
|
|
|
/* I2C driver probe function */
|
|
static int __devinit cyttsp_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct cyttsp *ts;
|
|
int error;
|
|
int retval = CY_OK;
|
|
|
|
cyttsp_info("Start Probe 1.2\n");
|
|
|
|
/* allocate and clear memory */
|
|
ts = kzalloc(sizeof(struct cyttsp), GFP_KERNEL);
|
|
if (ts == NULL) {
|
|
cyttsp_xdebug1("err kzalloc for cyttsp\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Enable runtime PM ops, start in ACTIVE mode */
|
|
error = pm_runtime_set_active(&client->dev);
|
|
if (error < 0)
|
|
dev_dbg(&client->dev, "unable to set runtime pm state\n");
|
|
pm_runtime_enable(&client->dev);
|
|
|
|
if (!(retval < CY_OK)) {
|
|
/* register driver_data */
|
|
ts->client = client;
|
|
ts->platform_data = client->dev.platform_data;
|
|
|
|
if (ts->platform_data->fw_fname)
|
|
strlcpy(ts->fw_fname, ts->platform_data->fw_fname,
|
|
FW_FNAME_LEN - 1);
|
|
else
|
|
strlcpy(ts->fw_fname, "cyttsp.hex", FW_FNAME_LEN - 1);
|
|
|
|
if (ts->platform_data->gen == CY_GEN3) {
|
|
ts->fw_start_addr = 0x0b00;
|
|
} else if (ts->platform_data->gen == CY_GEN2) {
|
|
ts->fw_start_addr = 0x0880;
|
|
} else {
|
|
pr_err("%s: unsupported cypress chip\n", __func__);
|
|
kfree(ts);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_init(&ts->mutex);
|
|
i2c_set_clientdata(client, ts);
|
|
|
|
error = cyttsp_initialize(client, ts);
|
|
if (error) {
|
|
cyttsp_xdebug1("err cyttsp_initialize\n");
|
|
/* release mutex */
|
|
mutex_destroy(&ts->mutex);
|
|
/* deallocate memory */
|
|
kfree(ts);
|
|
/*
|
|
i2c_del_driver(&cyttsp_driver);
|
|
*/
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_HAS_EARLYSUSPEND
|
|
if (!(retval < CY_OK)) {
|
|
ts->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1;
|
|
ts->early_suspend.suspend = cyttsp_early_suspend;
|
|
ts->early_suspend.resume = cyttsp_late_resume;
|
|
register_early_suspend(&ts->early_suspend);
|
|
}
|
|
#endif /* CONFIG_HAS_EARLYSUSPEND */
|
|
device_init_wakeup(&client->dev, ts->platform_data->wakeup);
|
|
|
|
cyttsp_info("Start Probe %s\n", \
|
|
(retval < CY_OK) ? "FAIL" : "PASS");
|
|
|
|
return retval;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int cyttsp_regulator_lpm(struct cyttsp *ts, bool on)
|
|
{
|
|
int rc = 0, i;
|
|
const struct cyttsp_regulator *reg_info =
|
|
ts->platform_data->regulator_info;
|
|
u8 num_reg = ts->platform_data->num_regulators;
|
|
|
|
if (on == false)
|
|
goto regulator_hpm;
|
|
|
|
for (i = 0; i < num_reg; i++) {
|
|
if (regulator_count_voltages(ts->vdd[i]) < 0)
|
|
continue;
|
|
rc = regulator_set_optimum_mode(ts->vdd[i],
|
|
reg_info[i].lpm_load_uA);
|
|
if (rc < 0) {
|
|
pr_err("%s: regulator_set_optimum failed rc = %d\n",
|
|
__func__, rc);
|
|
goto fail_regulator_lpm;
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
regulator_hpm:
|
|
for (i = 0; i < num_reg; i++) {
|
|
if (regulator_count_voltages(ts->vdd[i]) < 0)
|
|
continue;
|
|
rc = regulator_set_optimum_mode(ts->vdd[i],
|
|
reg_info[i].hpm_load_uA);
|
|
if (rc < 0) {
|
|
pr_err("%s: regulator_set_optimum failed"
|
|
"rc = %d\n", __func__, rc);
|
|
goto fail_regulator_hpm;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail_regulator_lpm:
|
|
while (i--) {
|
|
if (regulator_count_voltages(ts->vdd[i]) < 0)
|
|
continue;
|
|
regulator_set_optimum_mode(ts->vdd[i],
|
|
reg_info[i].hpm_load_uA);
|
|
}
|
|
|
|
return rc;
|
|
|
|
fail_regulator_hpm:
|
|
while (i--) {
|
|
if (regulator_count_voltages(ts->vdd[i]) < 0)
|
|
continue;
|
|
regulator_set_optimum_mode(ts->vdd[i],
|
|
reg_info[i].lpm_load_uA);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* Function to manage power-on resume */
|
|
static int cyttsp_resume(struct device *dev)
|
|
{
|
|
struct cyttsp *ts = dev_get_drvdata(dev);
|
|
int retval = CY_OK;
|
|
|
|
cyttsp_debug("Wake Up\n");
|
|
|
|
if (device_may_wakeup(dev)) {
|
|
if (ts->client->irq)
|
|
disable_irq_wake(ts->client->irq);
|
|
return 0;
|
|
}
|
|
|
|
if (ts->is_suspended == false) {
|
|
pr_err("%s: in wakeup state\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
/* re-enable the interrupt prior to wake device */
|
|
if (ts->client->irq)
|
|
enable_irq(ts->client->irq);
|
|
|
|
if (ts->platform_data->use_sleep &&
|
|
(ts->platform_data->power_state != CY_ACTIVE_STATE)) {
|
|
if (ts->platform_data->resume)
|
|
retval = ts->platform_data->resume(ts->client);
|
|
else
|
|
retval = cyttsp_regulator_lpm(ts, false);
|
|
/* take TTSP device out of bootloader mode;
|
|
* switch back to TrueTouch operational mode */
|
|
if (!(retval < CY_OK)) {
|
|
int tries = 0;
|
|
do {
|
|
msleep(100);
|
|
retval = i2c_smbus_write_i2c_block_data(
|
|
ts->client, CY_REG_BASE,
|
|
sizeof(bl_cmd), bl_cmd);
|
|
if (retval == CY_OK)
|
|
break;
|
|
} while (tries++ < 2);
|
|
/* wait for TTSP Device to complete
|
|
* switch to Operational mode */
|
|
tries = 0;
|
|
do {
|
|
msleep(100);
|
|
cyttsp_putbl(ts, 16, false, false, false);
|
|
} while (GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
|
|
tries++ < 2);
|
|
cyttsp_putbl(ts, 16, true, false, false);
|
|
}
|
|
}
|
|
|
|
if (!(retval < CY_OK) &&
|
|
(GET_HSTMODE(g_bl_data.bl_file) == CY_OK)) {
|
|
ts->platform_data->power_state = CY_ACTIVE_STATE;
|
|
|
|
/* re-enable the timer after resuming */
|
|
if (ts->client->irq == 0)
|
|
mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);
|
|
} else
|
|
retval = -ENODEV;
|
|
|
|
ts->is_suspended = false;
|
|
cyttsp_debug("Wake Up %s\n", \
|
|
(retval < CY_OK) ? "FAIL" : "PASS");
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* Function to manage low power suspend */
|
|
static int cyttsp_suspend(struct device *dev)
|
|
{
|
|
struct cyttsp *ts = dev_get_drvdata(dev);
|
|
u8 sleep_mode = CY_OK;
|
|
int retval = CY_OK;
|
|
|
|
cyttsp_debug("Enter Sleep\n");
|
|
|
|
if (device_may_wakeup(dev)) {
|
|
if (ts->client->irq)
|
|
enable_irq_wake(ts->client->irq);
|
|
return 0;
|
|
}
|
|
|
|
if (ts->is_suspended == true) {
|
|
pr_err("%s: in sleep state\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
mutex_lock(&ts->mutex);
|
|
if (ts->cyttsp_fwloader_mode) {
|
|
pr_err("%s:firmware upgrade mode:"
|
|
"suspend not allowed\n", __func__);
|
|
mutex_unlock(&ts->mutex);
|
|
return -EBUSY;
|
|
}
|
|
mutex_unlock(&ts->mutex);
|
|
|
|
|
|
if (ts->client->irq == 0)
|
|
del_timer(&ts->timer);
|
|
else
|
|
disable_irq(ts->client->irq);
|
|
|
|
if (!(retval < CY_OK)) {
|
|
if (ts->platform_data->use_sleep &&
|
|
(ts->platform_data->power_state == CY_ACTIVE_STATE)) {
|
|
if (ts->platform_data->suspend) {
|
|
retval =
|
|
ts->platform_data->suspend(ts->client);
|
|
} else {
|
|
retval = cyttsp_regulator_lpm(ts, true);
|
|
}
|
|
if (ts->platform_data->use_sleep & CY_USE_DEEP_SLEEP_SEL)
|
|
sleep_mode = CY_DEEP_SLEEP_MODE;
|
|
else
|
|
sleep_mode = CY_LOW_PWR_MODE;
|
|
|
|
if (!(retval < CY_OK)) {
|
|
retval =
|
|
i2c_smbus_write_i2c_block_data(ts->client,
|
|
CY_REG_BASE,
|
|
sizeof(sleep_mode), &sleep_mode);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!(retval < CY_OK)) {
|
|
if (sleep_mode == CY_DEEP_SLEEP_MODE)
|
|
ts->platform_data->power_state = CY_SLEEP_STATE;
|
|
else if (sleep_mode == CY_LOW_PWR_MODE)
|
|
ts->platform_data->power_state = CY_LOW_PWR_STATE;
|
|
}
|
|
|
|
ts->is_suspended = true;
|
|
cyttsp_debug("Sleep Power state is %s\n", \
|
|
(ts->platform_data->power_state == CY_ACTIVE_STATE) ? \
|
|
"ACTIVE" : \
|
|
((ts->platform_data->power_state == CY_SLEEP_STATE) ? \
|
|
"SLEEP" : "LOW POWER"));
|
|
|
|
return retval;
|
|
}
|
|
#endif
|
|
|
|
/* registered in driver struct */
|
|
static int __devexit cyttsp_remove(struct i2c_client *client)
|
|
{
|
|
/* clientdata registered on probe */
|
|
struct cyttsp *ts = i2c_get_clientdata(client);
|
|
int err;
|
|
|
|
cyttsp_alert("Unregister\n");
|
|
|
|
pm_runtime_set_suspended(&client->dev);
|
|
pm_runtime_disable(&client->dev);
|
|
|
|
device_init_wakeup(&client->dev, 0);
|
|
device_remove_file(&ts->client->dev, &dev_attr_irq_enable);
|
|
device_remove_file(&client->dev, &dev_attr_cyttsp_fw_ver);
|
|
device_remove_file(&client->dev, &dev_attr_cyttsp_update_fw);
|
|
device_remove_file(&client->dev, &dev_attr_cyttsp_force_update_fw);
|
|
device_remove_file(&client->dev, &dev_attr_cyttsp_fw_name);
|
|
|
|
/* free up timer or irq */
|
|
if (ts->client->irq == 0) {
|
|
err = del_timer(&ts->timer);
|
|
if (err < CY_OK)
|
|
cyttsp_alert("error: failed to delete timer\n");
|
|
} else
|
|
free_irq(client->irq, ts);
|
|
|
|
if (ts->platform_data->regulator_info)
|
|
cyttsp_power_device(ts, false);
|
|
|
|
#ifdef CONFIG_HAS_EARLYSUSPEND
|
|
unregister_early_suspend(&ts->early_suspend);
|
|
#endif /* CONFIG_HAS_EARLYSUSPEND */
|
|
|
|
mutex_destroy(&ts->mutex);
|
|
|
|
if (gpio_is_valid(ts->platform_data->sleep_gpio)) {
|
|
gpio_direction_output(ts->platform_data->sleep_gpio, 1);
|
|
gpio_free(ts->platform_data->sleep_gpio);
|
|
}
|
|
|
|
if (gpio_is_valid(ts->platform_data->resout_gpio)) {
|
|
gpio_direction_output(ts->platform_data->resout_gpio, 0);
|
|
gpio_free(ts->platform_data->resout_gpio);
|
|
}
|
|
|
|
if (gpio_is_valid(ts->platform_data->irq_gpio))
|
|
gpio_free(ts->platform_data->irq_gpio);
|
|
|
|
/* housekeeping */
|
|
kfree(ts);
|
|
|
|
cyttsp_alert("Leaving\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_HAS_EARLYSUSPEND
|
|
static void cyttsp_early_suspend(struct early_suspend *handler)
|
|
{
|
|
struct cyttsp *ts;
|
|
|
|
ts = container_of(handler, struct cyttsp, early_suspend);
|
|
cyttsp_suspend(&ts->client->dev);
|
|
}
|
|
|
|
static void cyttsp_late_resume(struct early_suspend *handler)
|
|
{
|
|
struct cyttsp *ts;
|
|
|
|
ts = container_of(handler, struct cyttsp, early_suspend);
|
|
cyttsp_resume(&ts->client->dev);
|
|
}
|
|
#endif /* CONFIG_HAS_EARLYSUSPEND */
|
|
|
|
static int cyttsp_init(void)
|
|
{
|
|
int ret;
|
|
|
|
cyttsp_info("Cypress TrueTouch(R) Standard Product\n");
|
|
cyttsp_info("I2C Touchscreen Driver (Built %s @ %s)\n", \
|
|
__DATE__, __TIME__);
|
|
|
|
ret = i2c_add_driver(&cyttsp_driver);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void cyttsp_exit(void)
|
|
{
|
|
return i2c_del_driver(&cyttsp_driver);
|
|
}
|
|
|
|
module_init(cyttsp_init);
|
|
module_exit(cyttsp_exit);
|
|
MODULE_FIRMWARE("cyttsp.fw");
|
|
|