M7350/kernel/arch/arm/mach-davinci/include/mach/gpio-davinci.h
2024-09-09 08:52:07 +00:00

92 lines
2.6 KiB
C

/*
* TI DaVinci GPIO Support
*
* Copyright (c) 2006 David Brownell
* Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __DAVINCI_DAVINCI_GPIO_H
#define __DAVINCI_DAVINCI_GPIO_H
#include <linux/io.h>
#include <linux/spinlock.h>
#include <asm-generic/gpio.h>
#include <mach/irqs.h>
#include <mach/common.h>
#define DAVINCI_GPIO_BASE 0x01C67000
enum davinci_gpio_type {
GPIO_TYPE_DAVINCI = 0,
GPIO_TYPE_TNETV107X,
};
/*
* basic gpio routines
*
* board-specific init should be done by arch/.../.../board-XXX.c (maybe
* initializing banks together) rather than boot loaders; kexec() won't
* go through boot loaders.
*
* the gpio clock will be turned on when gpios are used, and you may also
* need to pay attention to PINMUX registers to be sure those pins are
* used as gpios, not with other peripherals.
*
* On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
* and maybe for later updates, code may write GPIO(N). These may be
* all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
* may not support all the GPIOs in that range.
*
* GPIOs can also be on external chips, numbered after the ones built-in
* to the DaVinci chip. For now, they won't be usable as IRQ sources.
*/
#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
/* Convert GPIO signal to GPIO pin number */
#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
struct davinci_gpio_controller {
struct gpio_chip chip;
int irq_base;
spinlock_t lock;
void __iomem *regs;
void __iomem *set_data;
void __iomem *clr_data;
void __iomem *in_data;
};
/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
* with constant parameters; or in outlined code they execute at runtime.
*
* You'd access the controller directly when reading or writing more than
* one gpio value at a time, and to support wired logic where the value
* being driven by the cpu need not match the value read back.
*
* These are NOT part of the cross-platform GPIO interface
*/
static inline struct davinci_gpio_controller *
__gpio_to_controller(unsigned gpio)
{
struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
int index = gpio / 32;
if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
return NULL;
return ctlrs + index;
}
static inline u32 __gpio_mask(unsigned gpio)
{
return 1 << (gpio % 32);
}
#endif /* __DAVINCI_DAVINCI_GPIO_H */