156 lines
3.8 KiB
C
156 lines
3.8 KiB
C
/*
|
|
* phy-bcm-kona-usb2.c - Broadcom Kona USB2 Phy Driver
|
|
*
|
|
* Copyright (C) 2013 Linaro Limited
|
|
* Matt Porter <mporter@linaro.org>
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define OTGCTL (0)
|
|
#define OTGCTL_OTGSTAT2 BIT(31)
|
|
#define OTGCTL_OTGSTAT1 BIT(30)
|
|
#define OTGCTL_PRST_N_SW BIT(11)
|
|
#define OTGCTL_HRESET_N BIT(10)
|
|
#define OTGCTL_UTMI_LINE_STATE1 BIT(9)
|
|
#define OTGCTL_UTMI_LINE_STATE0 BIT(8)
|
|
|
|
#define P1CTL (8)
|
|
#define P1CTL_SOFT_RESET BIT(1)
|
|
#define P1CTL_NON_DRIVING BIT(0)
|
|
|
|
struct bcm_kona_usb {
|
|
void __iomem *regs;
|
|
};
|
|
|
|
static void bcm_kona_usb_phy_power(struct bcm_kona_usb *phy, int on)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(phy->regs + OTGCTL);
|
|
if (on) {
|
|
/* Configure and power PHY */
|
|
val &= ~(OTGCTL_OTGSTAT2 | OTGCTL_OTGSTAT1 |
|
|
OTGCTL_UTMI_LINE_STATE1 | OTGCTL_UTMI_LINE_STATE0);
|
|
val |= OTGCTL_PRST_N_SW | OTGCTL_HRESET_N;
|
|
} else {
|
|
val &= ~(OTGCTL_PRST_N_SW | OTGCTL_HRESET_N);
|
|
}
|
|
writel(val, phy->regs + OTGCTL);
|
|
}
|
|
|
|
static int bcm_kona_usb_phy_init(struct phy *gphy)
|
|
{
|
|
struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
|
|
u32 val;
|
|
|
|
/* Soft reset PHY */
|
|
val = readl(phy->regs + P1CTL);
|
|
val &= ~P1CTL_NON_DRIVING;
|
|
val |= P1CTL_SOFT_RESET;
|
|
writel(val, phy->regs + P1CTL);
|
|
writel(val & ~P1CTL_SOFT_RESET, phy->regs + P1CTL);
|
|
/* Reset needs to be asserted for 2ms */
|
|
mdelay(2);
|
|
writel(val | P1CTL_SOFT_RESET, phy->regs + P1CTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_kona_usb_phy_power_on(struct phy *gphy)
|
|
{
|
|
struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
|
|
|
|
bcm_kona_usb_phy_power(phy, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_kona_usb_phy_power_off(struct phy *gphy)
|
|
{
|
|
struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
|
|
|
|
bcm_kona_usb_phy_power(phy, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_ops ops = {
|
|
.init = bcm_kona_usb_phy_init,
|
|
.power_on = bcm_kona_usb_phy_power_on,
|
|
.power_off = bcm_kona_usb_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int bcm_kona_usb2_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct bcm_kona_usb *phy;
|
|
struct resource *res;
|
|
struct phy *gphy;
|
|
struct phy_provider *phy_provider;
|
|
|
|
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
phy->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(phy->regs))
|
|
return PTR_ERR(phy->regs);
|
|
|
|
platform_set_drvdata(pdev, phy);
|
|
|
|
gphy = devm_phy_create(dev, NULL, &ops, NULL);
|
|
if (IS_ERR(gphy))
|
|
return PTR_ERR(gphy);
|
|
|
|
/* The Kona PHY supports an 8-bit wide UTMI interface */
|
|
phy_set_bus_width(gphy, 8);
|
|
|
|
phy_set_drvdata(gphy, phy);
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev,
|
|
of_phy_simple_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static const struct of_device_id bcm_kona_usb2_dt_ids[] = {
|
|
{ .compatible = "brcm,kona-usb2-phy" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, bcm_kona_usb2_dt_ids);
|
|
|
|
static struct platform_driver bcm_kona_usb2_driver = {
|
|
.probe = bcm_kona_usb2_probe,
|
|
.driver = {
|
|
.name = "bcm-kona-usb2",
|
|
.of_match_table = bcm_kona_usb2_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(bcm_kona_usb2_driver);
|
|
|
|
MODULE_ALIAS("platform:bcm-kona-usb2");
|
|
MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
|
|
MODULE_DESCRIPTION("BCM Kona USB 2.0 PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|