713 lines
18 KiB
C
713 lines
18 KiB
C
/*
|
|
* Ethernet driver for the WIZnet W5300 chip.
|
|
*
|
|
* Copyright (C) 2008-2009 WIZnet Co.,Ltd.
|
|
* Copyright (C) 2011 Taehun Kim <kth3321 <at> gmail.com>
|
|
* Copyright (C) 2012 Mike Sinkovsky <msink@permonline.ru>
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kconfig.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/platform_data/wiznet.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#define DRV_NAME "w5300"
|
|
#define DRV_VERSION "2012-04-04"
|
|
|
|
MODULE_DESCRIPTION("WIZnet W5300 Ethernet driver v"DRV_VERSION);
|
|
MODULE_AUTHOR("Mike Sinkovsky <msink@permonline.ru>");
|
|
MODULE_ALIAS("platform:"DRV_NAME);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*
|
|
* Registers
|
|
*/
|
|
#define W5300_MR 0x0000 /* Mode Register */
|
|
#define MR_DBW (1 << 15) /* Data bus width */
|
|
#define MR_MPF (1 << 14) /* Mac layer pause frame */
|
|
#define MR_WDF(n) (((n)&7)<<11) /* Write data fetch time */
|
|
#define MR_RDH (1 << 10) /* Read data hold time */
|
|
#define MR_FS (1 << 8) /* FIFO swap */
|
|
#define MR_RST (1 << 7) /* S/W reset */
|
|
#define MR_PB (1 << 4) /* Ping block */
|
|
#define MR_DBS (1 << 2) /* Data bus swap */
|
|
#define MR_IND (1 << 0) /* Indirect mode */
|
|
#define W5300_IR 0x0002 /* Interrupt Register */
|
|
#define W5300_IMR 0x0004 /* Interrupt Mask Register */
|
|
#define IR_S0 0x0001 /* S0 interrupt */
|
|
#define W5300_SHARL 0x0008 /* Source MAC address (0123) */
|
|
#define W5300_SHARH 0x000c /* Source MAC address (45) */
|
|
#define W5300_TMSRL 0x0020 /* Transmit Memory Size (0123) */
|
|
#define W5300_TMSRH 0x0024 /* Transmit Memory Size (4567) */
|
|
#define W5300_RMSRL 0x0028 /* Receive Memory Size (0123) */
|
|
#define W5300_RMSRH 0x002c /* Receive Memory Size (4567) */
|
|
#define W5300_MTYPE 0x0030 /* Memory Type */
|
|
#define W5300_IDR 0x00fe /* Chip ID register */
|
|
#define IDR_W5300 0x5300 /* =0x5300 for WIZnet W5300 */
|
|
#define W5300_S0_MR 0x0200 /* S0 Mode Register */
|
|
#define S0_MR_CLOSED 0x0000 /* Close mode */
|
|
#define S0_MR_MACRAW 0x0004 /* MAC RAW mode (promiscous) */
|
|
#define S0_MR_MACRAW_MF 0x0044 /* MAC RAW mode (filtered) */
|
|
#define W5300_S0_CR 0x0202 /* S0 Command Register */
|
|
#define S0_CR_OPEN 0x0001 /* OPEN command */
|
|
#define S0_CR_CLOSE 0x0010 /* CLOSE command */
|
|
#define S0_CR_SEND 0x0020 /* SEND command */
|
|
#define S0_CR_RECV 0x0040 /* RECV command */
|
|
#define W5300_S0_IMR 0x0204 /* S0 Interrupt Mask Register */
|
|
#define W5300_S0_IR 0x0206 /* S0 Interrupt Register */
|
|
#define S0_IR_RECV 0x0004 /* Receive interrupt */
|
|
#define S0_IR_SENDOK 0x0010 /* Send OK interrupt */
|
|
#define W5300_S0_SSR 0x0208 /* S0 Socket Status Register */
|
|
#define W5300_S0_TX_WRSR 0x0220 /* S0 TX Write Size Register */
|
|
#define W5300_S0_TX_FSR 0x0224 /* S0 TX Free Size Register */
|
|
#define W5300_S0_RX_RSR 0x0228 /* S0 Received data Size */
|
|
#define W5300_S0_TX_FIFO 0x022e /* S0 Transmit FIFO */
|
|
#define W5300_S0_RX_FIFO 0x0230 /* S0 Receive FIFO */
|
|
#define W5300_REGS_LEN 0x0400
|
|
|
|
/*
|
|
* Device driver private data structure
|
|
*/
|
|
struct w5300_priv {
|
|
void __iomem *base;
|
|
spinlock_t reg_lock;
|
|
bool indirect;
|
|
u16 (*read) (struct w5300_priv *priv, u16 addr);
|
|
void (*write)(struct w5300_priv *priv, u16 addr, u16 data);
|
|
int irq;
|
|
int link_irq;
|
|
int link_gpio;
|
|
|
|
struct napi_struct napi;
|
|
struct net_device *ndev;
|
|
bool promisc;
|
|
u32 msg_enable;
|
|
};
|
|
|
|
/************************************************************************
|
|
*
|
|
* Lowlevel I/O functions
|
|
*
|
|
***********************************************************************/
|
|
|
|
/*
|
|
* In direct address mode host system can directly access W5300 registers
|
|
* after mapping to Memory-Mapped I/O space.
|
|
*
|
|
* 0x400 bytes are required for memory space.
|
|
*/
|
|
static inline u16 w5300_read_direct(struct w5300_priv *priv, u16 addr)
|
|
{
|
|
return ioread16(priv->base + (addr << CONFIG_WIZNET_BUS_SHIFT));
|
|
}
|
|
|
|
static inline void w5300_write_direct(struct w5300_priv *priv,
|
|
u16 addr, u16 data)
|
|
{
|
|
iowrite16(data, priv->base + (addr << CONFIG_WIZNET_BUS_SHIFT));
|
|
}
|
|
|
|
/*
|
|
* In indirect address mode host system indirectly accesses registers by
|
|
* using Indirect Mode Address Register (IDM_AR) and Indirect Mode Data
|
|
* Register (IDM_DR), which are directly mapped to Memory-Mapped I/O space.
|
|
* Mode Register (MR) is directly accessible.
|
|
*
|
|
* Only 0x06 bytes are required for memory space.
|
|
*/
|
|
#define W5300_IDM_AR 0x0002 /* Indirect Mode Address */
|
|
#define W5300_IDM_DR 0x0004 /* Indirect Mode Data */
|
|
|
|
static u16 w5300_read_indirect(struct w5300_priv *priv, u16 addr)
|
|
{
|
|
unsigned long flags;
|
|
u16 data;
|
|
|
|
spin_lock_irqsave(&priv->reg_lock, flags);
|
|
w5300_write_direct(priv, W5300_IDM_AR, addr);
|
|
mmiowb();
|
|
data = w5300_read_direct(priv, W5300_IDM_DR);
|
|
spin_unlock_irqrestore(&priv->reg_lock, flags);
|
|
|
|
return data;
|
|
}
|
|
|
|
static void w5300_write_indirect(struct w5300_priv *priv, u16 addr, u16 data)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->reg_lock, flags);
|
|
w5300_write_direct(priv, W5300_IDM_AR, addr);
|
|
mmiowb();
|
|
w5300_write_direct(priv, W5300_IDM_DR, data);
|
|
mmiowb();
|
|
spin_unlock_irqrestore(&priv->reg_lock, flags);
|
|
}
|
|
|
|
#if defined(CONFIG_WIZNET_BUS_DIRECT)
|
|
#define w5300_read w5300_read_direct
|
|
#define w5300_write w5300_write_direct
|
|
|
|
#elif defined(CONFIG_WIZNET_BUS_INDIRECT)
|
|
#define w5300_read w5300_read_indirect
|
|
#define w5300_write w5300_write_indirect
|
|
|
|
#else /* CONFIG_WIZNET_BUS_ANY */
|
|
#define w5300_read priv->read
|
|
#define w5300_write priv->write
|
|
#endif
|
|
|
|
static u32 w5300_read32(struct w5300_priv *priv, u16 addr)
|
|
{
|
|
u32 data;
|
|
data = w5300_read(priv, addr) << 16;
|
|
data |= w5300_read(priv, addr + 2);
|
|
return data;
|
|
}
|
|
|
|
static void w5300_write32(struct w5300_priv *priv, u16 addr, u32 data)
|
|
{
|
|
w5300_write(priv, addr, data >> 16);
|
|
w5300_write(priv, addr + 2, data);
|
|
}
|
|
|
|
static int w5300_command(struct w5300_priv *priv, u16 cmd)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
w5300_write(priv, W5300_S0_CR, cmd);
|
|
mmiowb();
|
|
|
|
while (w5300_read(priv, W5300_S0_CR) != 0) {
|
|
if (time_after(jiffies, timeout))
|
|
return -EIO;
|
|
cpu_relax();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void w5300_read_frame(struct w5300_priv *priv, u8 *buf, int len)
|
|
{
|
|
u16 fifo;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i += 2) {
|
|
fifo = w5300_read(priv, W5300_S0_RX_FIFO);
|
|
*buf++ = fifo >> 8;
|
|
*buf++ = fifo;
|
|
}
|
|
fifo = w5300_read(priv, W5300_S0_RX_FIFO);
|
|
fifo = w5300_read(priv, W5300_S0_RX_FIFO);
|
|
}
|
|
|
|
static void w5300_write_frame(struct w5300_priv *priv, u8 *buf, int len)
|
|
{
|
|
u16 fifo;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i += 2) {
|
|
fifo = *buf++ << 8;
|
|
fifo |= *buf++;
|
|
w5300_write(priv, W5300_S0_TX_FIFO, fifo);
|
|
}
|
|
w5300_write32(priv, W5300_S0_TX_WRSR, len);
|
|
}
|
|
|
|
static void w5300_write_macaddr(struct w5300_priv *priv)
|
|
{
|
|
struct net_device *ndev = priv->ndev;
|
|
w5300_write32(priv, W5300_SHARL,
|
|
ndev->dev_addr[0] << 24 |
|
|
ndev->dev_addr[1] << 16 |
|
|
ndev->dev_addr[2] << 8 |
|
|
ndev->dev_addr[3]);
|
|
w5300_write(priv, W5300_SHARH,
|
|
ndev->dev_addr[4] << 8 |
|
|
ndev->dev_addr[5]);
|
|
mmiowb();
|
|
}
|
|
|
|
static void w5300_hw_reset(struct w5300_priv *priv)
|
|
{
|
|
w5300_write_direct(priv, W5300_MR, MR_RST);
|
|
mmiowb();
|
|
mdelay(5);
|
|
w5300_write_direct(priv, W5300_MR, priv->indirect ?
|
|
MR_WDF(7) | MR_PB | MR_IND :
|
|
MR_WDF(7) | MR_PB);
|
|
mmiowb();
|
|
w5300_write(priv, W5300_IMR, 0);
|
|
w5300_write_macaddr(priv);
|
|
|
|
/* Configure 128K of internal memory
|
|
* as 64K RX fifo and 64K TX fifo
|
|
*/
|
|
w5300_write32(priv, W5300_RMSRL, 64 << 24);
|
|
w5300_write32(priv, W5300_RMSRH, 0);
|
|
w5300_write32(priv, W5300_TMSRL, 64 << 24);
|
|
w5300_write32(priv, W5300_TMSRH, 0);
|
|
w5300_write(priv, W5300_MTYPE, 0x00ff);
|
|
mmiowb();
|
|
}
|
|
|
|
static void w5300_hw_start(struct w5300_priv *priv)
|
|
{
|
|
w5300_write(priv, W5300_S0_MR, priv->promisc ?
|
|
S0_MR_MACRAW : S0_MR_MACRAW_MF);
|
|
mmiowb();
|
|
w5300_command(priv, S0_CR_OPEN);
|
|
w5300_write(priv, W5300_S0_IMR, S0_IR_RECV | S0_IR_SENDOK);
|
|
w5300_write(priv, W5300_IMR, IR_S0);
|
|
mmiowb();
|
|
}
|
|
|
|
static void w5300_hw_close(struct w5300_priv *priv)
|
|
{
|
|
w5300_write(priv, W5300_IMR, 0);
|
|
mmiowb();
|
|
w5300_command(priv, S0_CR_CLOSE);
|
|
}
|
|
|
|
/***********************************************************************
|
|
*
|
|
* Device driver functions / callbacks
|
|
*
|
|
***********************************************************************/
|
|
|
|
static void w5300_get_drvinfo(struct net_device *ndev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
|
|
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
|
|
strlcpy(info->bus_info, dev_name(ndev->dev.parent),
|
|
sizeof(info->bus_info));
|
|
}
|
|
|
|
static u32 w5300_get_link(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
if (gpio_is_valid(priv->link_gpio))
|
|
return !!gpio_get_value(priv->link_gpio);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static u32 w5300_get_msglevel(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
return priv->msg_enable;
|
|
}
|
|
|
|
static void w5300_set_msglevel(struct net_device *ndev, u32 value)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
priv->msg_enable = value;
|
|
}
|
|
|
|
static int w5300_get_regs_len(struct net_device *ndev)
|
|
{
|
|
return W5300_REGS_LEN;
|
|
}
|
|
|
|
static void w5300_get_regs(struct net_device *ndev,
|
|
struct ethtool_regs *regs, void *_buf)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
u8 *buf = _buf;
|
|
u16 addr;
|
|
u16 data;
|
|
|
|
regs->version = 1;
|
|
for (addr = 0; addr < W5300_REGS_LEN; addr += 2) {
|
|
switch (addr & 0x23f) {
|
|
case W5300_S0_TX_FIFO: /* cannot read TX_FIFO */
|
|
case W5300_S0_RX_FIFO: /* cannot read RX_FIFO */
|
|
data = 0xffff;
|
|
break;
|
|
default:
|
|
data = w5300_read(priv, addr);
|
|
break;
|
|
}
|
|
*buf++ = data >> 8;
|
|
*buf++ = data;
|
|
}
|
|
}
|
|
|
|
static void w5300_tx_timeout(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
netif_stop_queue(ndev);
|
|
w5300_hw_reset(priv);
|
|
w5300_hw_start(priv);
|
|
ndev->stats.tx_errors++;
|
|
ndev->trans_start = jiffies;
|
|
netif_wake_queue(ndev);
|
|
}
|
|
|
|
static int w5300_start_tx(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
netif_stop_queue(ndev);
|
|
|
|
w5300_write_frame(priv, skb->data, skb->len);
|
|
mmiowb();
|
|
ndev->stats.tx_packets++;
|
|
ndev->stats.tx_bytes += skb->len;
|
|
dev_kfree_skb(skb);
|
|
netif_dbg(priv, tx_queued, ndev, "tx queued\n");
|
|
|
|
w5300_command(priv, S0_CR_SEND);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int w5300_napi_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct w5300_priv *priv = container_of(napi, struct w5300_priv, napi);
|
|
struct net_device *ndev = priv->ndev;
|
|
struct sk_buff *skb;
|
|
int rx_count;
|
|
u16 rx_len;
|
|
|
|
for (rx_count = 0; rx_count < budget; rx_count++) {
|
|
u32 rx_fifo_len = w5300_read32(priv, W5300_S0_RX_RSR);
|
|
if (rx_fifo_len == 0)
|
|
break;
|
|
|
|
rx_len = w5300_read(priv, W5300_S0_RX_FIFO);
|
|
|
|
skb = netdev_alloc_skb_ip_align(ndev, roundup(rx_len, 2));
|
|
if (unlikely(!skb)) {
|
|
u32 i;
|
|
for (i = 0; i < rx_fifo_len; i += 2)
|
|
w5300_read(priv, W5300_S0_RX_FIFO);
|
|
ndev->stats.rx_dropped++;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
skb_put(skb, rx_len);
|
|
w5300_read_frame(priv, skb->data, rx_len);
|
|
skb->protocol = eth_type_trans(skb, ndev);
|
|
|
|
netif_receive_skb(skb);
|
|
ndev->stats.rx_packets++;
|
|
ndev->stats.rx_bytes += rx_len;
|
|
}
|
|
|
|
if (rx_count < budget) {
|
|
w5300_write(priv, W5300_IMR, IR_S0);
|
|
mmiowb();
|
|
napi_complete(napi);
|
|
}
|
|
|
|
return rx_count;
|
|
}
|
|
|
|
static irqreturn_t w5300_interrupt(int irq, void *ndev_instance)
|
|
{
|
|
struct net_device *ndev = ndev_instance;
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
int ir = w5300_read(priv, W5300_S0_IR);
|
|
if (!ir)
|
|
return IRQ_NONE;
|
|
w5300_write(priv, W5300_S0_IR, ir);
|
|
mmiowb();
|
|
|
|
if (ir & S0_IR_SENDOK) {
|
|
netif_dbg(priv, tx_done, ndev, "tx done\n");
|
|
netif_wake_queue(ndev);
|
|
}
|
|
|
|
if (ir & S0_IR_RECV) {
|
|
if (napi_schedule_prep(&priv->napi)) {
|
|
w5300_write(priv, W5300_IMR, 0);
|
|
mmiowb();
|
|
__napi_schedule(&priv->napi);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t w5300_detect_link(int irq, void *ndev_instance)
|
|
{
|
|
struct net_device *ndev = ndev_instance;
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
if (netif_running(ndev)) {
|
|
if (gpio_get_value(priv->link_gpio) != 0) {
|
|
netif_info(priv, link, ndev, "link is up\n");
|
|
netif_carrier_on(ndev);
|
|
} else {
|
|
netif_info(priv, link, ndev, "link is down\n");
|
|
netif_carrier_off(ndev);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void w5300_set_rx_mode(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
bool set_promisc = (ndev->flags & IFF_PROMISC) != 0;
|
|
|
|
if (priv->promisc != set_promisc) {
|
|
priv->promisc = set_promisc;
|
|
w5300_hw_start(priv);
|
|
}
|
|
}
|
|
|
|
static int w5300_set_macaddr(struct net_device *ndev, void *addr)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
struct sockaddr *sock_addr = addr;
|
|
|
|
if (!is_valid_ether_addr(sock_addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
memcpy(ndev->dev_addr, sock_addr->sa_data, ETH_ALEN);
|
|
w5300_write_macaddr(priv);
|
|
return 0;
|
|
}
|
|
|
|
static int w5300_open(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
netif_info(priv, ifup, ndev, "enabling\n");
|
|
w5300_hw_start(priv);
|
|
napi_enable(&priv->napi);
|
|
netif_start_queue(ndev);
|
|
if (!gpio_is_valid(priv->link_gpio) ||
|
|
gpio_get_value(priv->link_gpio) != 0)
|
|
netif_carrier_on(ndev);
|
|
return 0;
|
|
}
|
|
|
|
static int w5300_stop(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
netif_info(priv, ifdown, ndev, "shutting down\n");
|
|
w5300_hw_close(priv);
|
|
netif_carrier_off(ndev);
|
|
netif_stop_queue(ndev);
|
|
napi_disable(&priv->napi);
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops w5300_ethtool_ops = {
|
|
.get_drvinfo = w5300_get_drvinfo,
|
|
.get_msglevel = w5300_get_msglevel,
|
|
.set_msglevel = w5300_set_msglevel,
|
|
.get_link = w5300_get_link,
|
|
.get_regs_len = w5300_get_regs_len,
|
|
.get_regs = w5300_get_regs,
|
|
};
|
|
|
|
static const struct net_device_ops w5300_netdev_ops = {
|
|
.ndo_open = w5300_open,
|
|
.ndo_stop = w5300_stop,
|
|
.ndo_start_xmit = w5300_start_tx,
|
|
.ndo_tx_timeout = w5300_tx_timeout,
|
|
.ndo_set_rx_mode = w5300_set_rx_mode,
|
|
.ndo_set_mac_address = w5300_set_macaddr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
};
|
|
|
|
static int w5300_hw_probe(struct platform_device *pdev)
|
|
{
|
|
struct wiznet_platform_data *data = dev_get_platdata(&pdev->dev);
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
const char *name = netdev_name(ndev);
|
|
struct resource *mem;
|
|
int mem_size;
|
|
int irq;
|
|
int ret;
|
|
|
|
if (data && is_valid_ether_addr(data->mac_addr)) {
|
|
memcpy(ndev->dev_addr, data->mac_addr, ETH_ALEN);
|
|
} else {
|
|
eth_hw_addr_random(ndev);
|
|
}
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!mem)
|
|
return -ENXIO;
|
|
mem_size = resource_size(mem);
|
|
|
|
priv->base = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
spin_lock_init(&priv->reg_lock);
|
|
priv->indirect = mem_size < W5300_BUS_DIRECT_SIZE;
|
|
if (priv->indirect) {
|
|
priv->read = w5300_read_indirect;
|
|
priv->write = w5300_write_indirect;
|
|
} else {
|
|
priv->read = w5300_read_direct;
|
|
priv->write = w5300_write_direct;
|
|
}
|
|
|
|
w5300_hw_reset(priv);
|
|
if (w5300_read(priv, W5300_IDR) != IDR_W5300)
|
|
return -ENODEV;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
ret = request_irq(irq, w5300_interrupt,
|
|
IRQ_TYPE_LEVEL_LOW, name, ndev);
|
|
if (ret < 0)
|
|
return ret;
|
|
priv->irq = irq;
|
|
|
|
priv->link_gpio = data ? data->link_gpio : -EINVAL;
|
|
if (gpio_is_valid(priv->link_gpio)) {
|
|
char *link_name = devm_kzalloc(&pdev->dev, 16, GFP_KERNEL);
|
|
if (!link_name)
|
|
return -ENOMEM;
|
|
snprintf(link_name, 16, "%s-link", name);
|
|
priv->link_irq = gpio_to_irq(priv->link_gpio);
|
|
if (request_any_context_irq(priv->link_irq, w5300_detect_link,
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
|
|
link_name, priv->ndev) < 0)
|
|
priv->link_gpio = -EINVAL;
|
|
}
|
|
|
|
netdev_info(ndev, "at 0x%llx irq %d\n", (u64)mem->start, irq);
|
|
return 0;
|
|
}
|
|
|
|
static int w5300_probe(struct platform_device *pdev)
|
|
{
|
|
struct w5300_priv *priv;
|
|
struct net_device *ndev;
|
|
int err;
|
|
|
|
ndev = alloc_etherdev(sizeof(*priv));
|
|
if (!ndev)
|
|
return -ENOMEM;
|
|
SET_NETDEV_DEV(ndev, &pdev->dev);
|
|
platform_set_drvdata(pdev, ndev);
|
|
priv = netdev_priv(ndev);
|
|
priv->ndev = ndev;
|
|
|
|
ndev->netdev_ops = &w5300_netdev_ops;
|
|
ndev->ethtool_ops = &w5300_ethtool_ops;
|
|
ndev->watchdog_timeo = HZ;
|
|
netif_napi_add(ndev, &priv->napi, w5300_napi_poll, 16);
|
|
|
|
/* This chip doesn't support VLAN packets with normal MTU,
|
|
* so disable VLAN for this device.
|
|
*/
|
|
ndev->features |= NETIF_F_VLAN_CHALLENGED;
|
|
|
|
err = register_netdev(ndev);
|
|
if (err < 0)
|
|
goto err_register;
|
|
|
|
err = w5300_hw_probe(pdev);
|
|
if (err < 0)
|
|
goto err_hw_probe;
|
|
|
|
return 0;
|
|
|
|
err_hw_probe:
|
|
unregister_netdev(ndev);
|
|
err_register:
|
|
free_netdev(ndev);
|
|
return err;
|
|
}
|
|
|
|
static int w5300_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
w5300_hw_reset(priv);
|
|
free_irq(priv->irq, ndev);
|
|
if (gpio_is_valid(priv->link_gpio))
|
|
free_irq(priv->link_irq, ndev);
|
|
|
|
unregister_netdev(ndev);
|
|
free_netdev(ndev);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int w5300_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
if (netif_running(ndev)) {
|
|
netif_carrier_off(ndev);
|
|
netif_device_detach(ndev);
|
|
|
|
w5300_hw_close(priv);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int w5300_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
if (!netif_running(ndev)) {
|
|
w5300_hw_reset(priv);
|
|
w5300_hw_start(priv);
|
|
|
|
netif_device_attach(ndev);
|
|
if (!gpio_is_valid(priv->link_gpio) ||
|
|
gpio_get_value(priv->link_gpio) != 0)
|
|
netif_carrier_on(ndev);
|
|
}
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(w5300_pm_ops, w5300_suspend, w5300_resume);
|
|
|
|
static struct platform_driver w5300_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.owner = THIS_MODULE,
|
|
.pm = &w5300_pm_ops,
|
|
},
|
|
.probe = w5300_probe,
|
|
.remove = w5300_remove,
|
|
};
|
|
|
|
module_platform_driver(w5300_driver);
|