M7350/kernel/drivers/mtd/nand/xway_nand.c
2024-09-09 08:57:42 +00:00

202 lines
5.3 KiB
C

/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright © 2012 John Crispin <blogic@openwrt.org>
*/
#include <linux/mtd/nand.h>
#include <linux/of_gpio.h>
#include <linux/of_platform.h>
#include <lantiq_soc.h>
/* nand registers */
#define EBU_ADDSEL1 0x24
#define EBU_NAND_CON 0xB0
#define EBU_NAND_WAIT 0xB4
#define EBU_NAND_ECC0 0xB8
#define EBU_NAND_ECC_AC 0xBC
/* nand commands */
#define NAND_CMD_ALE (1 << 2)
#define NAND_CMD_CLE (1 << 3)
#define NAND_CMD_CS (1 << 4)
#define NAND_WRITE_CMD_RESET 0xff
#define NAND_WRITE_CMD (NAND_CMD_CS | NAND_CMD_CLE)
#define NAND_WRITE_ADDR (NAND_CMD_CS | NAND_CMD_ALE)
#define NAND_WRITE_DATA (NAND_CMD_CS)
#define NAND_READ_DATA (NAND_CMD_CS)
#define NAND_WAIT_WR_C (1 << 3)
#define NAND_WAIT_RD (0x1)
/* we need to tel the ebu which addr we mapped the nand to */
#define ADDSEL1_MASK(x) (x << 4)
#define ADDSEL1_REGEN 1
/* we need to tell the EBU that we have nand attached and set it up properly */
#define BUSCON1_SETUP (1 << 22)
#define BUSCON1_BCGEN_RES (0x3 << 12)
#define BUSCON1_WAITWRC2 (2 << 8)
#define BUSCON1_WAITRDC2 (2 << 6)
#define BUSCON1_HOLDC1 (1 << 4)
#define BUSCON1_RECOVC1 (1 << 2)
#define BUSCON1_CMULT4 1
#define NAND_CON_CE (1 << 20)
#define NAND_CON_OUT_CS1 (1 << 10)
#define NAND_CON_IN_CS1 (1 << 8)
#define NAND_CON_PRE_P (1 << 7)
#define NAND_CON_WP_P (1 << 6)
#define NAND_CON_SE_P (1 << 5)
#define NAND_CON_CS_P (1 << 4)
#define NAND_CON_CSMUX (1 << 1)
#define NAND_CON_NANDM 1
static void xway_reset_chip(struct nand_chip *chip)
{
unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
unsigned long flags;
nandaddr &= ~NAND_WRITE_ADDR;
nandaddr |= NAND_WRITE_CMD;
/* finish with a reset */
spin_lock_irqsave(&ebu_lock, flags);
writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
;
spin_unlock_irqrestore(&ebu_lock, flags);
}
static void xway_select_chip(struct mtd_info *mtd, int chip)
{
switch (chip) {
case -1:
ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
break;
case 0:
ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
break;
default:
BUG();
}
}
static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
unsigned long flags;
if (ctrl & NAND_CTRL_CHANGE) {
nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
if (ctrl & NAND_CLE)
nandaddr |= NAND_WRITE_CMD;
else
nandaddr |= NAND_WRITE_ADDR;
this->IO_ADDR_W = (void __iomem *) nandaddr;
}
if (cmd != NAND_CMD_NONE) {
spin_lock_irqsave(&ebu_lock, flags);
writeb(cmd, this->IO_ADDR_W);
while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
;
spin_unlock_irqrestore(&ebu_lock, flags);
}
}
static int xway_dev_ready(struct mtd_info *mtd)
{
return ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD;
}
static unsigned char xway_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
unsigned long flags;
int ret;
spin_lock_irqsave(&ebu_lock, flags);
ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
spin_unlock_irqrestore(&ebu_lock, flags);
return ret;
}
static int xway_nand_probe(struct platform_device *pdev)
{
struct nand_chip *this = platform_get_drvdata(pdev);
unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
const __be32 *cs = of_get_property(pdev->dev.of_node,
"lantiq,cs", NULL);
u32 cs_flag = 0;
/* load our CS from the DT. Either we find a valid 1 or default to 0 */
if (cs && (*cs == 1))
cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
/* setup the EBU to run in NAND mode on our base addr */
ltq_ebu_w32(CPHYSADDR(nandaddr)
| ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
| BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
| BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
| NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
| cs_flag, EBU_NAND_CON);
/* finish with a reset */
xway_reset_chip(this);
return 0;
}
/* allow users to override the partition in DT using the cmdline */
static const char *part_probes[] = { "cmdlinepart", "ofpart", NULL };
static struct platform_nand_data xway_nand_data = {
.chip = {
.nr_chips = 1,
.chip_delay = 30,
.part_probe_types = part_probes,
},
.ctrl = {
.probe = xway_nand_probe,
.cmd_ctrl = xway_cmd_ctrl,
.dev_ready = xway_dev_ready,
.select_chip = xway_select_chip,
.read_byte = xway_read_byte,
}
};
/*
* Try to find the node inside the DT. If it is available attach out
* platform_nand_data
*/
static int __init xway_register_nand(void)
{
struct device_node *node;
struct platform_device *pdev;
node = of_find_compatible_node(NULL, NULL, "lantiq,nand-xway");
if (!node)
return -ENOENT;
pdev = of_find_device_by_node(node);
if (!pdev)
return -EINVAL;
pdev->dev.platform_data = &xway_nand_data;
of_node_put(node);
return 0;
}
subsys_initcall(xway_register_nand);