M7350/kernel/drivers/mfd/rts5227.c
2024-09-09 08:57:42 +00:00

302 lines
8.6 KiB
C

/* Driver for Realtek PCI-Express card reader
*
* Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Author:
* Wei WANG <wei_wang@realsil.com.cn>
* Roger Tseng <rogerable@realtek.com>
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/mfd/rtsx_pci.h>
#include "rtsx_pcr.h"
static void rts5227_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
{
u8 driving_3v3[4][3] = {
{0x13, 0x13, 0x13},
{0x96, 0x96, 0x96},
{0x7F, 0x7F, 0x7F},
{0x96, 0x96, 0x96},
};
u8 driving_1v8[4][3] = {
{0x99, 0x99, 0x99},
{0xAA, 0xAA, 0xAA},
{0xFE, 0xFE, 0xFE},
{0xB3, 0xB3, 0xB3},
};
u8 (*driving)[3], drive_sel;
if (voltage == OUTPUT_3V3) {
driving = driving_3v3;
drive_sel = pcr->sd30_drive_sel_3v3;
} else {
driving = driving_1v8;
drive_sel = pcr->sd30_drive_sel_1v8;
}
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL,
0xFF, driving[drive_sel][0]);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL,
0xFF, driving[drive_sel][1]);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL,
0xFF, driving[drive_sel][2]);
}
static void rts5227_fetch_vendor_settings(struct rtsx_pcr *pcr)
{
u32 reg;
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (!rtsx_vendor_setting_valid(reg))
return;
pcr->aspm_en = rtsx_reg_to_aspm(reg);
pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
pcr->card_drive_sel &= 0x3F;
pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, &reg);
dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
if (rtsx_reg_check_reverse_socket(reg))
pcr->flags |= PCR_REVERSE_SOCKET;
}
static void rts5227_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
{
/* Set relink_time to 0 */
rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, 0xFF, 0);
rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, 0xFF, 0);
rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);
if (pm_state == HOST_ENTER_S3)
rtsx_pci_write_register(pcr, PM_CTRL3, 0x10, 0x10);
rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
}
static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
{
u16 cap;
rtsx_pci_init_cmd(pcr);
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
/* Reset ASPM state to default value */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
/* Switch LDO3318 source from DV33 to card_3v3 */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
/* LED shine disabled, set initial shine cycle period */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
/* Configure LTR */
pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &cap);
if (cap & PCI_EXP_DEVCTL2_LTR_EN)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LTR_CTL, 0xFF, 0xA3);
/* Configure OBFF */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OBFF_CFG, 0x03, 0x03);
/* Configure driving */
rts5227_fill_driving(pcr, OUTPUT_3V3);
/* Configure force_clock_req */
if (pcr->flags & PCR_REVERSE_SOCKET)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
AUTOLOAD_CFG_BASE + 3, 0xB8, 0xB8);
else
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
AUTOLOAD_CFG_BASE + 3, 0xB8, 0x88);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PM_CTRL3, 0x10, 0x00);
return rtsx_pci_send_cmd(pcr, 100);
}
static int rts5227_optimize_phy(struct rtsx_pcr *pcr)
{
/* Optimize RX sensitivity */
return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
}
static int rts5227_turn_on_led(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
}
static int rts5227_turn_off_led(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
}
static int rts5227_enable_auto_blink(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
}
static int rts5227_disable_auto_blink(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
}
static int rts5227_card_power_on(struct rtsx_pcr *pcr, int card)
{
int err;
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
SD_POWER_MASK, SD_PARTIAL_POWER_ON);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
LDO3318_PWR_MASK, 0x02);
err = rtsx_pci_send_cmd(pcr, 100);
if (err < 0)
return err;
/* To avoid too large in-rush current */
udelay(150);
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
SD_POWER_MASK, SD_POWER_ON);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
LDO3318_PWR_MASK, 0x06);
err = rtsx_pci_send_cmd(pcr, 100);
if (err < 0)
return err;
return 0;
}
static int rts5227_card_power_off(struct rtsx_pcr *pcr, int card)
{
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
SD_POWER_MASK | PMOS_STRG_MASK,
SD_POWER_OFF | PMOS_STRG_400mA);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
LDO3318_PWR_MASK, 0X00);
return rtsx_pci_send_cmd(pcr, 100);
}
static int rts5227_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
{
int err;
if (voltage == OUTPUT_3V3) {
err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
if (err < 0)
return err;
} else if (voltage == OUTPUT_1V8) {
err = rtsx_pci_write_phy_register(pcr, 0x11, 0x3C02);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C80 | 0x24);
if (err < 0)
return err;
} else {
return -EINVAL;
}
/* set pad drive */
rtsx_pci_init_cmd(pcr);
rts5227_fill_driving(pcr, voltage);
return rtsx_pci_send_cmd(pcr, 100);
}
static const struct pcr_ops rts5227_pcr_ops = {
.fetch_vendor_settings = rts5227_fetch_vendor_settings,
.extra_init_hw = rts5227_extra_init_hw,
.optimize_phy = rts5227_optimize_phy,
.turn_on_led = rts5227_turn_on_led,
.turn_off_led = rts5227_turn_off_led,
.enable_auto_blink = rts5227_enable_auto_blink,
.disable_auto_blink = rts5227_disable_auto_blink,
.card_power_on = rts5227_card_power_on,
.card_power_off = rts5227_card_power_off,
.switch_output_voltage = rts5227_switch_output_voltage,
.cd_deglitch = NULL,
.conv_clk_and_div_n = NULL,
.force_power_down = rts5227_force_power_down,
};
/* SD Pull Control Enable:
* SD_DAT[3:0] ==> pull up
* SD_CD ==> pull up
* SD_WP ==> pull up
* SD_CMD ==> pull up
* SD_CLK ==> pull down
*/
static const u32 rts5227_sd_pull_ctl_enable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
0,
};
/* SD Pull Control Disable:
* SD_DAT[3:0] ==> pull down
* SD_CD ==> pull up
* SD_WP ==> pull down
* SD_CMD ==> pull down
* SD_CLK ==> pull down
*/
static const u32 rts5227_sd_pull_ctl_disable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
0,
};
/* MS Pull Control Enable:
* MS CD ==> pull up
* others ==> pull down
*/
static const u32 rts5227_ms_pull_ctl_enable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
0,
};
/* MS Pull Control Disable:
* MS CD ==> pull up
* others ==> pull down
*/
static const u32 rts5227_ms_pull_ctl_disable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
0,
};
void rts5227_init_params(struct rtsx_pcr *pcr)
{
pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
pcr->num_slots = 2;
pcr->ops = &rts5227_pcr_ops;
pcr->flags = 0;
pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT;
pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
pcr->aspm_en = ASPM_L1_EN;
pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 7, 7);
pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl;
pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl;
pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl;
pcr->ms_pull_ctl_disable_tbl = rts5227_ms_pull_ctl_disable_tbl;
}