227 lines
6.7 KiB
ArmAsm
227 lines
6.7 KiB
ArmAsm
/*
|
|
* Copyright (C) 2010,2011 Google, Inc.
|
|
* Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
|
|
*
|
|
* Author:
|
|
* Colin Cross <ccross@google.com>
|
|
* Erik Gilling <konkers@google.com>
|
|
* Doug Anderson <dianders@chromium.org>
|
|
* Stephen Warren <swarren@nvidia.com>
|
|
*
|
|
* Portions based on mach-omap2's debug-macro.S
|
|
* Copyright (C) 1994-1999 Russell King
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/serial_reg.h>
|
|
|
|
#define UART_SHIFT 2
|
|
|
|
/* Physical addresses */
|
|
#define TEGRA_CLK_RESET_BASE 0x60006000
|
|
#define TEGRA_APB_MISC_BASE 0x70000000
|
|
#define TEGRA_UARTA_BASE 0x70006000
|
|
#define TEGRA_UARTB_BASE 0x70006040
|
|
#define TEGRA_UARTC_BASE 0x70006200
|
|
#define TEGRA_UARTD_BASE 0x70006300
|
|
#define TEGRA_UARTE_BASE 0x70006400
|
|
#define TEGRA_PMC_BASE 0x7000e400
|
|
|
|
#define TEGRA_CLK_RST_DEVICES_L (TEGRA_CLK_RESET_BASE + 0x04)
|
|
#define TEGRA_CLK_RST_DEVICES_H (TEGRA_CLK_RESET_BASE + 0x08)
|
|
#define TEGRA_CLK_RST_DEVICES_U (TEGRA_CLK_RESET_BASE + 0x0c)
|
|
#define TEGRA_CLK_OUT_ENB_L (TEGRA_CLK_RESET_BASE + 0x10)
|
|
#define TEGRA_CLK_OUT_ENB_H (TEGRA_CLK_RESET_BASE + 0x14)
|
|
#define TEGRA_CLK_OUT_ENB_U (TEGRA_CLK_RESET_BASE + 0x18)
|
|
#define TEGRA_PMC_SCRATCH20 (TEGRA_PMC_BASE + 0xa0)
|
|
#define TEGRA_APB_MISC_GP_HIDREV (TEGRA_APB_MISC_BASE + 0x804)
|
|
|
|
/*
|
|
* Must be section-aligned since a section mapping is used early on.
|
|
* Must not overlap with regions in mach-tegra/io.c:tegra_io_desc[].
|
|
*/
|
|
#define UART_VIRTUAL_BASE 0xfe800000
|
|
|
|
#define checkuart(rp, rv, lhu, bit, uart) \
|
|
/* Load address of CLK_RST register */ \
|
|
ldr rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \
|
|
/* Load value from CLK_RST register */ \
|
|
ldr rp, [rp, #0] ; \
|
|
/* Test UART's reset bit */ \
|
|
tst rp, #(1 << bit) ; \
|
|
/* If set, can't use UART; jump to save no UART */ \
|
|
bne 90f ; \
|
|
/* Load address of CLK_OUT_ENB register */ \
|
|
ldr rp, =TEGRA_CLK_OUT_ENB_##lhu ; \
|
|
/* Load value from CLK_OUT_ENB register */ \
|
|
ldr rp, [rp, #0] ; \
|
|
/* Test UART's clock enable bit */ \
|
|
tst rp, #(1 << bit) ; \
|
|
/* If clear, can't use UART; jump to save no UART */ \
|
|
beq 90f ; \
|
|
/* Passed all tests, load address of UART registers */ \
|
|
ldr rp, =TEGRA_UART##uart##_BASE ; \
|
|
/* Jump to save UART address */ \
|
|
b 91f
|
|
|
|
.macro addruart, rp, rv, tmp
|
|
adr \rp, 99f @ actual addr of 99f
|
|
ldr \rv, [\rp] @ linked addr is stored there
|
|
sub \rv, \rv, \rp @ offset between the two
|
|
ldr \rp, [\rp, #4] @ linked tegra_uart_config
|
|
sub \tmp, \rp, \rv @ actual tegra_uart_config
|
|
ldr \rp, [\tmp] @ Load tegra_uart_config
|
|
cmp \rp, #1 @ needs initialization?
|
|
bne 100f @ no; go load the addresses
|
|
mov \rv, #0 @ yes; record init is done
|
|
str \rv, [\tmp]
|
|
|
|
#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
|
|
/* Check ODMDATA */
|
|
10: ldr \rp, =TEGRA_PMC_SCRATCH20
|
|
ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20
|
|
lsr \rv, \rp, #18 @ 19:18 are console type
|
|
and \rv, \rv, #3
|
|
cmp \rv, #2 @ 2 and 3 mean DCC, UART
|
|
beq 11f @ some boards swap the meaning
|
|
cmp \rv, #3 @ so accept either
|
|
bne 90f
|
|
11: lsr \rv, \rp, #15 @ 17:15 are UART ID
|
|
and \rv, #7
|
|
cmp \rv, #0 @ UART 0?
|
|
beq 20f
|
|
cmp \rv, #1 @ UART 1?
|
|
beq 21f
|
|
cmp \rv, #2 @ UART 2?
|
|
beq 22f
|
|
cmp \rv, #3 @ UART 3?
|
|
beq 23f
|
|
cmp \rv, #4 @ UART 4?
|
|
beq 24f
|
|
b 90f @ invalid
|
|
#endif
|
|
|
|
#if defined(CONFIG_TEGRA_DEBUG_UARTA) || \
|
|
defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
|
|
/* Check UART A validity */
|
|
20: checkuart(\rp, \rv, L, 6, A)
|
|
#endif
|
|
|
|
#if defined(CONFIG_TEGRA_DEBUG_UARTB) || \
|
|
defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
|
|
/* Check UART B validity */
|
|
21: checkuart(\rp, \rv, L, 7, B)
|
|
#endif
|
|
|
|
#if defined(CONFIG_TEGRA_DEBUG_UARTC) || \
|
|
defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
|
|
/* Check UART C validity */
|
|
22: checkuart(\rp, \rv, H, 23, C)
|
|
#endif
|
|
|
|
#if defined(CONFIG_TEGRA_DEBUG_UARTD) || \
|
|
defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
|
|
/* Check UART D validity */
|
|
23: checkuart(\rp, \rv, U, 1, D)
|
|
#endif
|
|
|
|
#if defined(CONFIG_TEGRA_DEBUG_UARTE) || \
|
|
defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
|
|
/* Check UART E validity */
|
|
24:
|
|
checkuart(\rp, \rv, U, 2, E)
|
|
#endif
|
|
|
|
/* No valid UART found */
|
|
90: mov \rp, #0
|
|
/* fall through */
|
|
|
|
/* Record whichever UART we chose */
|
|
91: str \rp, [\tmp, #4] @ Store in tegra_uart_phys
|
|
cmp \rp, #0 @ Valid UART address?
|
|
bne 92f @ Yes, go process it
|
|
str \rp, [\tmp, #8] @ Store 0 in tegra_uart_virt
|
|
b 100f @ Done
|
|
92: and \rv, \rp, #0xffffff @ offset within 1MB section
|
|
add \rv, \rv, #UART_VIRTUAL_BASE
|
|
str \rv, [\tmp, #8] @ Store in tegra_uart_virt
|
|
b 100f
|
|
|
|
.align
|
|
99: .word .
|
|
.word tegra_uart_config
|
|
.ltorg
|
|
|
|
/* Load previously selected UART address */
|
|
100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys
|
|
ldr \rv, [\tmp, #8] @ Load tegra_uart_virt
|
|
.endm
|
|
|
|
/*
|
|
* Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
|
|
* check to make sure that the UART address is actually valid.
|
|
*/
|
|
|
|
.macro senduart, rd, rx
|
|
cmp \rx, #0
|
|
strneb \rd, [\rx, #UART_TX << UART_SHIFT]
|
|
1001:
|
|
.endm
|
|
|
|
.macro busyuart, rd, rx
|
|
cmp \rx, #0
|
|
beq 1002f
|
|
1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
|
|
and \rd, \rd, #UART_LSR_THRE
|
|
teq \rd, #UART_LSR_THRE
|
|
bne 1001b
|
|
1002:
|
|
.endm
|
|
|
|
.macro waituart, rd, rx
|
|
#ifdef FLOW_CONTROL
|
|
cmp \rx, #0
|
|
beq 1002f
|
|
1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
|
|
tst \rd, #UART_MSR_CTS
|
|
beq 1001b
|
|
1002:
|
|
#endif
|
|
.endm
|
|
|
|
/*
|
|
* Storage for the state maintained by the macros above.
|
|
*
|
|
* In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c.
|
|
* That's because this header is included from multiple files, and we only
|
|
* want a single copy of the data. In particular, the UART probing code above
|
|
* assumes it's running using physical addresses. This is true when this file
|
|
* is included from head.o, but not when included from debug.o. So we need
|
|
* to share the probe results between the two copies, rather than having
|
|
* to re-run the probing again later.
|
|
*
|
|
* In the decompressor, we put the symbol/storage right here, since common.c
|
|
* isn't included in the decompressor build. This symbol gets put in .text
|
|
* even though it's really data, since .data is discarded from the
|
|
* decompressor. Luckily, .text is writeable in the decompressor, unless
|
|
* CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
|
|
*/
|
|
#if defined(ZIMAGE)
|
|
tegra_uart_config:
|
|
/* Debug UART initialization required */
|
|
.word 1
|
|
/* Debug UART physical address */
|
|
.word 0
|
|
/* Debug UART virtual address */
|
|
.word 0
|
|
#endif
|