M7350/kernel/Documentation/devicetree/bindings/rtc/qpnp-rtc.txt
2024-09-09 08:52:07 +00:00

65 lines
1.8 KiB
Plaintext

* msm-qpnp-rtc
msm-qpnp-rtc is a RTC driver that supports 32 bit RTC housed inside PMIC.
Driver utilizes MSM SPMI interface to communicate with the RTC module.
RTC device is divided into two sub-peripherals one which controls basic RTC
and other for controlling alarm.
[PMIC RTC Device Declarations]
-Root Node-
Required properties :
- compatible: Must be "qcom,qpnp-rtc"
- #address-cells: The number of cells dedicated to represent an address
This must be set to '1'.
- #size-cells: The number of cells dedicated to represent address
space range of a peripheral. This must be set to '1'.
- spmi-dev-container: This specifies that all the device nodes specified
within this node should have their resources
coalesced into a single spmi_device.
Optional properties:
- qcom,qpnp-rtc-write: This property enables/disables rtc write
operation. If not mentioned rtc driver keeps
rtc writes disabled.
0 = Disable rtc writes.
1 = Enable rtc writes.
- qcom,qpnp-rtc-alarm-pwrup: This property enables/disables feature of
powering up phone (from power down state)
through alarm interrupt.
If not mentioned rtc driver will disable
feature of powring-up phone through alarm.
0 = Disable powering up of phone through
alarm interrupt.
1 = Enable powering up of phone through
alarm interrupt.
-Child Nodes-
Required properties :
- reg : Specify the spmi offset and size for device.
- interrupts: Specifies alarm interrupt, only for rtc_alarm
sub-peripheral.
Example:
qcom,pm8941_rtc {
spmi-dev-container;
compatible = "qcom,qpnp-rtc";
#address-cells = <1>;
#size-cells = <1>;
qcom,qpnp-rtc-write = <0>;
qcom,qpnp-rtc-alarm-pwrup = <0>;
qcom,pm8941_rtc_rw@6000 {
reg = <0x6000 0x100>;
};
qcom,pm8941_rtc_alarm@6100 {
reg = <0x6100 0x100>;
interrupts = <0x0 0x61 0x1>;
};
};