143 lines
4.4 KiB
Plaintext
143 lines
4.4 KiB
Plaintext
Marvell Berlin SoC Family Device Tree Bindings
|
|
---------------------------------------------------------------
|
|
|
|
Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
|
|
shall have the following properties:
|
|
|
|
* Required root node properties:
|
|
compatible: must contain "marvell,berlin"
|
|
|
|
In addition, the above compatible shall be extended with the specific
|
|
SoC and board used. Currently known SoC compatibles are:
|
|
"marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100),
|
|
"marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005)
|
|
"marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????)
|
|
"marvell,berlin2q" for Marvell Armada 1500-pro (BG2Q, 88DE3114)
|
|
"marvell,berlin3" for Marvell Armada ? (BG3, 88DE????)
|
|
|
|
* Example:
|
|
|
|
/ {
|
|
model = "Sony NSZ-GS7";
|
|
compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
|
|
|
|
...
|
|
}
|
|
|
|
* Marvell Berlin CPU control bindings
|
|
|
|
CPU control register allows various operations on CPUs, like resetting them
|
|
independently.
|
|
|
|
Required properties:
|
|
- compatible: should be "marvell,berlin-cpu-ctrl"
|
|
- reg: address and length of the register set
|
|
|
|
Example:
|
|
|
|
cpu-ctrl@f7dd0000 {
|
|
compatible = "marvell,berlin-cpu-ctrl";
|
|
reg = <0xf7dd0000 0x10000>;
|
|
};
|
|
|
|
* Marvell Berlin2 chip control binding
|
|
|
|
Marvell Berlin SoCs have a chip control register set providing several
|
|
individual registers dealing with pinmux, padmux, clock, reset, and secondary
|
|
CPU boot address. Unfortunately, the individual registers are spread among the
|
|
chip control registers, so there should be a single DT node only providing the
|
|
different functions which are described below.
|
|
|
|
Required properties:
|
|
- compatible: shall be one of
|
|
"marvell,berlin2-chip-ctrl" for BG2
|
|
"marvell,berlin2cd-chip-ctrl" for BG2CD
|
|
"marvell,berlin2q-chip-ctrl" for BG2Q
|
|
- reg: address and length of following register sets for
|
|
BG2/BG2CD: chip control register set
|
|
BG2Q: chip control register set and cpu pll registers
|
|
|
|
* Marvell Berlin2 system control binding
|
|
|
|
Marvell Berlin SoCs have a system control register set providing several
|
|
individual registers dealing with pinmux, padmux, and reset.
|
|
|
|
Required properties:
|
|
- compatible: should be one of
|
|
"marvell,berlin2-system-ctrl" for BG2
|
|
"marvell,berlin2cd-system-ctrl" for BG2CD
|
|
"marvell,berlin2q-system-ctrl" for BG2Q
|
|
- reg: address and length of the system control register set
|
|
|
|
* Clock provider binding
|
|
|
|
As clock related registers are spread among the chip control registers, the
|
|
chip control node also provides the clocks. Marvell Berlin2 (BG2, BG2CD, BG2Q)
|
|
SoCs share the same IP for PLLs and clocks, with some minor differences in
|
|
features and register layout.
|
|
|
|
Required properties:
|
|
- #clock-cells: shall be set to 1
|
|
- clocks: clock specifiers referencing the core clock input clocks
|
|
- clock-names: array of strings describing the input clock specifiers above.
|
|
Allowed clock-names for the reference clocks are
|
|
"refclk" for the SoCs osciallator input on all SoCs,
|
|
and SoC-specific input clocks for
|
|
BG2/BG2CD: "video_ext0" for the external video clock input
|
|
|
|
Clocks provided by core clocks shall be referenced by a clock specifier
|
|
indexing one of the provided clocks. Refer to dt-bindings/clock/berlin<soc>.h
|
|
for the corresponding index mapping.
|
|
|
|
* Pin controller binding
|
|
|
|
Pin control registers are part of both register sets, chip control and system
|
|
control. The pins controlled are organized in groups, so no actual pin
|
|
information is needed.
|
|
|
|
A pin-controller node should contain subnodes representing the pin group
|
|
configurations, one per function. Each subnode has the group name and the muxing
|
|
function used.
|
|
|
|
Be aware the Marvell Berlin datasheets use the keyword 'mode' for what is called
|
|
a 'function' in the pin-controller subsystem.
|
|
|
|
Required subnode-properties:
|
|
- groups: a list of strings describing the group names.
|
|
- function: a string describing the function used to mux the groups.
|
|
|
|
Example:
|
|
|
|
chip: chip-control@ea0000 {
|
|
compatible = "marvell,berlin2-chip-ctrl";
|
|
#clock-cells = <1>;
|
|
reg = <0xea0000 0x400>;
|
|
clocks = <&refclk>, <&externaldev 0>;
|
|
clock-names = "refclk", "video_ext0";
|
|
|
|
spi1_pmux: spi1-pmux {
|
|
groups = "G0";
|
|
function = "spi1";
|
|
};
|
|
};
|
|
|
|
sysctrl: system-controller@d000 {
|
|
compatible = "marvell,berlin2-system-ctrl";
|
|
reg = <0xd000 0x100>;
|
|
|
|
uart0_pmux: uart0-pmux {
|
|
groups = "GSM4";
|
|
function = "uart0";
|
|
};
|
|
|
|
uart1_pmux: uart1-pmux {
|
|
groups = "GSM5";
|
|
function = "uart1";
|
|
};
|
|
|
|
uart2_pmux: uart2-pmux {
|
|
groups = "GSM3";
|
|
function = "uart2";
|
|
};
|
|
};
|