M7350/bootable/bootloader/lk/dev/gcdb/display/gcdb_autopll.c
2024-09-09 08:57:42 +00:00

409 lines
11 KiB
C
Executable File

/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <debug.h>
#include <err.h>
#include <smem.h>
#include <msm_panel.h>
#include <mipi_dsi.h>
#include "gcdb_autopll.h"
static struct mdss_dsi_pll_config pll_data;
static void calculate_bitclock(struct msm_panel_info *pinfo)
{
uint32_t h_period = 0, v_period = 0;
uint32_t width = pinfo->xres;
struct dsc_desc *dsc = NULL;
int bpp_lane;
if (pinfo->mipi.dual_dsi)
width /= 2;
if (pinfo->compression_mode == COMPRESSION_DSC) {
dsc = &pinfo->dsc;
width = dsc->pclk_per_line;
} else if (pinfo->compression_mode == COMPRESSION_FBC) {
if (pinfo->fbc.comp_ratio)
width /= pinfo->fbc.comp_ratio;
}
h_period = width + pinfo->lcdc.h_back_porch +
pinfo->lcdc.h_front_porch + pinfo->lcdc.h_pulse_width +
pinfo->lcdc.xres_pad;
v_period = pinfo->yres + pinfo->lcdc.v_back_porch +
pinfo->lcdc.v_front_porch + pinfo->lcdc.v_pulse_width +
pinfo->lcdc.yres_pad;
bpp_lane = pinfo->bpp / pinfo->mipi.num_of_lanes;
/*
* If a bit clock rate is not specified, calculate it based
* on panel parameters
*/
if (pinfo->mipi.bitclock == 0)
pll_data.bit_clock = (h_period * v_period *
pinfo->mipi.frame_rate * bpp_lane);
else
pll_data.bit_clock = pinfo->mipi.bitclock;
pll_data.pixel_clock = (pll_data.bit_clock / bpp_lane);
dprintf(SPEW, "%s: bit_clk=%d pix_clk=%d\n", __func__,
pll_data.bit_clock, pll_data.pixel_clock);
pll_data.byte_clock = pll_data.bit_clock >> 3;
pll_data.halfbit_clock = pll_data.bit_clock >> 1;
}
static uint32_t calculate_div1()
{
uint32_t ret = NO_ERROR;
/* div1 - there is divide by 2 logic present */
if (pll_data.halfbit_clock > HALFBIT_CLOCK1) {
pll_data.posdiv1 = 0x0; /*div 1 */
pll_data.vco_clock = pll_data.halfbit_clock << 1;
} else if (pll_data.halfbit_clock > HALFBIT_CLOCK2) {
pll_data.posdiv1 = 0x1; /*div 2 */
pll_data.vco_clock = pll_data.halfbit_clock << 2;
} else if (pll_data.halfbit_clock > HALFBIT_CLOCK3) {
pll_data.posdiv1 = 0x3; /*div 4 */
pll_data.vco_clock = pll_data.halfbit_clock << 3;
} else if (pll_data.halfbit_clock > HALFBIT_CLOCK4) {
pll_data.posdiv1 = 0x4; /*div 5 */
pll_data.vco_clock = pll_data.halfbit_clock * 10;
} else {
dprintf(CRITICAL, "Not able to calculate posdiv1\n");
}
return ret;
}
static uint32_t calculate_div3(uint8_t bpp, uint8_t num_of_lanes)
{
pll_data.pclk_m = 0x1; /* M = 1, N= 1 */
pll_data.pclk_n = 0xFF; /* ~ (N-M) = 0xff */
pll_data.pclk_d = 0xFF; /* ~N = 0xFF */
/* formula is ( vco_clock / pdiv_digital) / mnd = pixel_clock */
/* div3 */
switch (bpp) {
case BITS_18:
if (num_of_lanes == 3) {
pll_data.posdiv3 = pll_data.vco_clock /
pll_data.pixel_clock;
} else {
pll_data.posdiv3 = (pll_data.pixel_clock * 2 / 9) /
pll_data.vco_clock;
pll_data.pclk_m = 0x2; /* M = 2,N = 9 */
pll_data.pclk_n = 0xF8;
pll_data.pclk_d = 0xF6;
}
break;
case BITS_16:
if (num_of_lanes == 3) {
pll_data.posdiv3 = (pll_data.pixel_clock * 3 / 8) /
pll_data.vco_clock;
pll_data.pclk_m = 0x3; /* M = 3, N = 9 */
pll_data.pclk_n = 0xFA;
pll_data.pclk_d = 0xF7;
} else {
pll_data.posdiv3 = pll_data.vco_clock /
pll_data.pixel_clock;
}
break;
case BITS_24:
default:
pll_data.posdiv3 = pll_data.vco_clock /
pll_data.pixel_clock;
break;
}
pll_data.posdiv3--; /* Register needs one value less */
return NO_ERROR;
}
static uint32_t calculate_dec_frac_start()
{
uint32_t refclk = 19200000;
uint32_t vco_rate = pll_data.vco_clock;
uint32_t tmp, mod;
vco_rate /= 2;
pll_data.dec_start = vco_rate / refclk;
tmp = vco_rate % refclk; /* module, fraction */
tmp /= 192;
tmp *= 1024;
tmp /= 100;
tmp *= 1024;
tmp /= 1000;
pll_data.frac_start = tmp;
vco_rate *= 2; /* restore */
if (pll_data.en_vco_zero_phase) {
tmp = vco_rate / (refclk / 1000);/* div 1000 first */
tmp *= 1024;
tmp /= 1000;
tmp /= 10;
pll_data.lock_comp = tmp - 1;
} else {
tmp = vco_rate / refclk;
mod = vco_rate % refclk;
tmp *= 127;
mod *= 127;
mod /= refclk;
tmp += mod;
tmp /= 10;
pll_data.lock_comp = tmp;
}
dprintf(SPEW, "%s: dec_start=0x%x dec_frac=0x%x lock_comp=0x%x\n", __func__,
pll_data.dec_start, pll_data.frac_start, pll_data.lock_comp);
return NO_ERROR;
}
static uint32_t calculate_vco_28nm(uint8_t bpp, uint8_t num_of_lanes)
{
/* If half bitclock is more than VCO min value */
if (pll_data.halfbit_clock > VCO_MIN_CLOCK) {
/* Direct Mode */
/* support vco clock to max value only */
if (pll_data.halfbit_clock > VCO_MAX_CLOCK)
pll_data.vco_clock = VCO_MAX_CLOCK;
else
pll_data.vco_clock = pll_data.halfbit_clock;
pll_data.directpath = 0x0;
pll_data.posdiv1 = 0x0; /*DSI spec says 0 - div 1 */
/*1 - div 2 */
/*F - div 16 */
} else {
/* Indirect Mode */
pll_data.directpath = 0x02; /* set bit 1 to enable for
indirect path */
calculate_div1();
}
/* calculate mnd and div3 for direct and indirect path */
calculate_div3(bpp, num_of_lanes);
return NO_ERROR;
}
#ifndef DISPLAY_EN_20NM_PLL_90_PHASE
static void config_20nm_pll_vco_range(void)
{
pll_data.vco_min = 300000000;
pll_data.vco_max = 1500000000;
pll_data.en_vco_zero_phase = 1;
dprintf(SPEW, "%s: Configured VCO for zero phase\n", __func__);
}
#else
static void config_20nm_pll_vco_range(void)
{
pll_data.vco_min = 1000000000;
pll_data.vco_max = 2000000000;
pll_data.en_vco_zero_phase = 0;
dprintf(SPEW, "%s: Configured VCO for 90 phase\n", __func__);
}
#endif
static uint32_t calculate_vco_thulium()
{
uint32_t rate;
uint32_t mod;
pll_data.vco_min = MIN_THULIUM_VCO_RATE;
pll_data.vco_max = MAX_THULIUM_VCO_RATE;
if (pll_data.bit_clock < pll_data.vco_min)
rate = pll_data.vco_min;
else if (pll_data.bit_clock > pll_data.vco_max)
rate = pll_data.vco_max;
else
rate = pll_data.bit_clock;
pll_data.ndiv = FIX_N_DIV;
if (pll_data.bit_clock) {
pll_data.n1div = rate / pll_data.bit_clock;
} else {
dprintf(ERROR, "%s: bit clock is 0, divider calculation failed\n",
__func__);
return ERROR;
}
mod = rate % pll_data.bit_clock;
if (mod)
pll_data.n1div++;
if (pll_data.n1div < MIN_THULIUM_DIV_VAL ||
pll_data.n1div > MAX_THULIUM_DIV_VAL) {
dprintf(ERROR, "%s: n1div is out of ranget:%d\n",
__func__, pll_data.n1div);
return ERROR;
}
pll_data.vco_clock = pll_data.bit_clock * pll_data.ndiv *
pll_data.n1div;
rate = pll_data.vco_clock;
rate /= pll_data.n1div;
rate /= FIX_PIXEL_CLOCK_DIV;
pll_data.n2div = rate / pll_data.pixel_clock;
mod = rate % pll_data.pixel_clock;
if (mod)
pll_data.n2div++;
if (pll_data.n2div < MIN_THULIUM_DIV_VAL ||
pll_data.n2div > MAX_THULIUM_DIV_VAL) {
dprintf(ERROR, "%s: n2div is out of ranget:%d\n",
__func__, pll_data.n2div);
return ERROR;
}
dprintf(SPEW, "%s: vco:%u n1div:%d n2div:%d bit_clk:%u pixel_clk:%u\n",
__func__, pll_data.vco_clock, pll_data.n1div, pll_data.n2div,
pll_data.bit_clock, pll_data.pixel_clock);
return NO_ERROR;
}
static uint32_t calculate_vco_20nm(uint8_t bpp, uint8_t lanes)
{
uint32_t vco, dsi_clk;
int mod, ndiv, hr_oclk2, hr_oclk3;
int m = 1;
int n = 1;
int bpp_m = 3; /* bpp = 3 */
int bpp_n = 1;
if (bpp == BITS_18) {
bpp_m = 9; /* bpp = 2.25 */
bpp_n = 4;
if (lanes == 2) {
m = 2;
n = 9;
} else if (lanes == 4) {
m = 4;
n = 9;
}
} else if (bpp == BITS_16) {
bpp_m = 2; /* bpp = 2 */
bpp_n = 1;
if (lanes == 3) {
m = 3;
n = 8;
}
}
hr_oclk2 = 4;
/* If bitclock is more than VCO min value */
if (pll_data.halfbit_clock >= ((pll_data.vco_min) >> 1)) {
/* Direct Mode */
vco = pll_data.halfbit_clock << 1;
/* support vco clock to max value only */
if (vco > (pll_data.vco_max))
vco = (pll_data.vco_max);
pll_data.directpath = 0x0;
pll_data.byte_clock = vco / 2 / hr_oclk2;
pll_data.lp_div_mux = 0x0;
ndiv = 1;
hr_oclk3 = hr_oclk2 * m / n * bpp_m / bpp_n / lanes;
} else {
/* Indirect Mode */
mod = (pll_data.vco_min) % (4 * pll_data.halfbit_clock );
ndiv = (pll_data.vco_min) / (4 * pll_data.halfbit_clock );
if (mod)
ndiv += 1;
vco = pll_data.halfbit_clock * 4 * ndiv;
pll_data.lp_div_mux = 0x1;
pll_data.directpath = 0x02; /* set bit 1 to enable for
indirect path */
pll_data.byte_clock = vco / 4 / hr_oclk2 / ndiv;
hr_oclk3 = hr_oclk2 * m / n * ndiv * 2 * bpp_m / bpp_n / lanes;
}
pll_data.vco_clock = vco;
dsi_clk = vco / 2 / hr_oclk3;
pll_data.ndiv = ndiv;
pll_data.hr_oclk2 = hr_oclk2 - 1; /* strat from 0 */
pll_data.hr_oclk3 = hr_oclk3 - 1; /* strat from 0 */
pll_data.pclk_m = m; /* M */
pll_data.pclk_n = ~(n - m); /* ~(N-M) */
pll_data.pclk_d = ~n; /* ~N */
dprintf(SPEW, "%s: oclk2=%d oclk3=%d ndiv=%d vco=%u dsi_clk=%u byte_clk=%u\n",
__func__, hr_oclk2, hr_oclk3, ndiv, vco, dsi_clk, pll_data.byte_clock);
calculate_dec_frac_start();
return NO_ERROR;
}
uint32_t calculate_clock_config(struct msm_panel_info *pinfo)
{
uint32_t ret = NO_ERROR;
calculate_bitclock(pinfo);
switch (pinfo->mipi.mdss_dsi_phy_db->pll_type) {
case DSI_PLL_TYPE_20NM:
config_20nm_pll_vco_range();
ret = calculate_vco_20nm(pinfo->bpp, pinfo->mipi.num_of_lanes);
break;
case DSI_PLL_TYPE_THULIUM:
ret = calculate_vco_thulium(pinfo->bpp, pinfo->mipi.num_of_lanes);
break;
case DSI_PLL_TYPE_28NM:
default:
ret = calculate_vco_28nm(pinfo->bpp, pinfo->mipi.num_of_lanes);
break;
}
pinfo->mipi.dsi_pll_config = &pll_data;
return ret;
}