#!/system/bin/sh
# Copyright (c) 2009-2010, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of The Linux Foundation nor
#       the names of its contributors may be used to endorse or promote
#       products derived from this software without specific prior written
#       permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

#
# start ril-daemon only for targets on which radio is present
#
baseband=`getprop ro.baseband`
multirild=`getprop ro.multi.rild`
dsds=`getprop persist.dsds.enabled`
case "$baseband" in
    "msm" | "csfb" | "svlte2a" | "unknown")
    start ril-daemon
    start qmuxd
    start netmgrd
    case "$baseband" in
        "svlte2a" | "csfb")
        start qmiproxy
    esac
    case "$multirild" in
        "true")
         case "$dsds" in
             "true")
             start ril-daemon1
         esac
    esac
esac

#
# Allow unique persistent serial numbers for devices connected via usb
# User needs to set unique usb serial number to persist.usb.serialno
#
serialno=`getprop persist.usb.serialno`
case "$serialno" in
    "") ;; #Do nothing here
    * )
    mount -t debugfs none /sys/kernel/debug
    echo "$serialno" > /sys/kernel/debug/android/serial_number
esac

#
# Allow persistent usb charging disabling
# User needs to set usb charging disabled in persist.usb.chgdisabled
#
target=`getprop ro.product.device`
usbchgdisabled=`getprop persist.usb.chgdisabled`
case "$usbchgdisabled" in
    "") ;; #Do nothing here
    * )
    case $target in
        "msm8660_surf" | "msm8660_csfb")
        echo "$usbchgdisabled" > /sys/module/pmic8058_charger/parameters/disabled
        echo "$usbchgdisabled" > /sys/module/smb137b/parameters/disabled
	;;
        "msm8960")
        echo "$usbchgdisabled" > /sys/module/pm8921_charger/parameters/disabled
	;;
    esac
esac

#
# Start gpsone_daemon for SVLTE Type I & II devices
#
case "$target" in
        "msm7630_fusion")
        start gpsone_daemon
esac
case "$baseband" in
        "svlte2a")
        start gpsone_daemon
        start bridgemgrd
esac

case "$target" in
    "msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
        insmod /system/lib/modules/ss_mfcinit.ko
        insmod /system/lib/modules/ss_vencoder.ko
        insmod /system/lib/modules/ss_vdecoder.ko
        chmod -h 0666 /dev/ss_mfc_reg
        chmod -h 0666 /dev/ss_vdec
        chmod -h 0666 /dev/ss_venc

        value=`cat /sys/devices/system/soc/soc0/hw_platform`

        case "$value" in
            "FFA" | "SVLTE_FFA")
             # linking to surf_keypad_qwerty.kcm.bin instead of surf_keypad_numeric.kcm.bin so that
             # the UI keyboard works fine.
             ln -s  /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin;;
            "Fluid")
             setprop ro.sf.lcd_density 240
             setprop qcom.bt.dev_power_class 2
             start profiler_daemon;;
            *)
             ln -s  /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin;;

        esac

# Dynamic Memory Managment (DMM) provides a sys file system to the userspace
# that can be used to plug in/out memory that has been configured as unstable.
# This unstable memory can be in Active or In-Active State.
# Each of which the userspace can request by writing to a sys file.

# ro.dev.dmm = 1; Indicates that DMM is enabled in the Android User Space. This
# property is set in the Android system properties file.

# ro.dev.dmm.dpd.start_address is set when the target has a 2x256Mb memory
# configuration. This is also used to indicate that the target is capable of
# setting EBI-1 to Deep Power Down or Self Refresh.

        mem="/sys/devices/system/memory"
        op=`cat $mem/movable_start_bytes`
        case "$op" in
           "0" )
                log -p i -t DMM DMM Disabled. movable_start_bytes not set: $op
            ;;

            "$mem/movable_start_bytes: No such file or directory " )
                log -p i -t DMM DMM Disabled. movable_start_bytes does not exist: $op
            ;;

            * )
                log -p i -t DMM DMM available. movable_start_bytes at $op
                movable_start_bytes=0x`cat $mem/movable_start_bytes`
                block_size_bytes=0x`cat $mem/block_size_bytes`
                block=$(($movable_start_bytes/$block_size_bytes))

                echo $movable_start_bytes > $mem/probe
                case "$?" in
                    "0" )
                        log -p i -t DMM $movable_start_bytes to physical hotplug succeeded.
                    ;;
                    * )
                        log -p e -t DMM $movable_start_bytes to physical hotplug failed.
                        return 1
                    ;;
                esac

               chown -h system system $mem/memory$block/state

                echo online > $mem/memory$block/state
                case "$?" in
                    "0" )
                        log -p i -t DMM \'echo online\' to logical hotplug succeeded.
                    ;;
                    * )
                        log -p e -t DMM \'echo online\' to logical hotplug failed.
                        return 1
                    ;;
                esac

                setprop ro.dev.dmm.dpd.start_address $movable_start_bytes
                setprop ro.dev.dmm.dpd.block $block
            ;;
        esac

        op=`cat $mem/low_power_memory_start_bytes`
        case "$op" in
            "0" )
                log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes not set:$op
            ;;

            "$mem/low_power_memory_start_bytes No such file or directory " )
                log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes does not exist:$op
            ;;

            * )
                log -p i -t DMM Self-Refresh-Only available. low_power_memory_start_bytes at $op
            ;;
        esac
        ;;
    "msm8660_surf" | "msm8660_csfb" )
        platformvalue=`cat /sys/devices/system/soc/soc0/hw_platform`
        case "$platformvalue" in
            "Fluid")
                echo 1 > /data/system/sensors/settings
                start sensors
                setprop ro.sf.lcd_density 240
                start profiler_daemon;;
        esac
        chown -h root.system /sys/devices/platform/msm_hsusb/gadget/wakeup
        chmod -h 220 /sys/devices/platform/msm_hsusb/gadget/wakeup
        ;;
    "msm7627a" )
        chown -h root.system /sys/devices/platform/msm_hsusb/gadget/wakeup
        chmod -h 220 /sys/devices/platform/msm_hsusb/gadget/wakeup
        ;;
    "msm8960")
	echo 1 > /data/system/sensors/settings
	start sensors
	chown -h root.system /sys/devices/platform/msm_otg/msm_hsusb/gadget/wakeup
	chmod -h 220 /sys/devices/platform/msm_otg/msm_hsusb/gadget/wakeup
	;;
esac