/* * drivers/serial/msm_serial.c - driver for msm7k serial device and console * * Copyright (C) 2007 Google, Inc. * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and * may be copied, distributed, and modified under those terms. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /* Acknowledgements: * This file is based on msm_serial.c, originally * Written by Robert Love */ #define pr_fmt(fmt) "%s: " fmt, __func__ #if defined(CONFIG_SERIAL_MSM_HSL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "msm_serial_hs_hwreg.h" /* * There are 3 different kind of UART Core available on MSM. * High Speed UART (i.e. Legacy HSUART), GSBI based HSUART * and BSLP based HSUART. */ enum uart_core_type { LEGACY_HSUART, GSBI_HSUART, BLSP_HSUART, }; /* * UART can be used in 2-wire or 4-wire mode. * Use uart_func_mode to set 2-wire or 4-wire mode. */ enum uart_func_mode { UART_TWO_WIRE, /* can't support HW Flow control. */ UART_FOUR_WIRE,/* can support HW Flow control. */ }; struct msm_hsl_port { struct uart_port uart; char name[16]; struct clk *clk; struct clk *pclk; struct dentry *loopback_dir; unsigned int imr; unsigned int *uart_csr_code; unsigned int *gsbi_mapbase; unsigned int *mapped_gsbi; unsigned int old_snap_state; unsigned int ver_id; int tx_timeout; struct mutex clk_mutex; enum uart_core_type uart_type; enum uart_func_mode func_mode; struct wake_lock port_open_wake_lock; int clk_enable_count; u32 bus_perf_client; /* BLSP UART required BUS Scaling data */ struct msm_bus_scale_pdata *bus_scale_table; }; #define UARTDM_VERSION_11_13 0 #define UARTDM_VERSION_14 1 #define UART_TO_MSM(uart_port) ((struct msm_hsl_port *) uart_port) #define is_console(port) ((port)->cons && \ (port)->cons->index == (port)->line) static const unsigned int regmap[][UARTDM_LAST] = { [UARTDM_VERSION_11_13] = { [UARTDM_MR1] = UARTDM_MR1_ADDR, [UARTDM_MR2] = UARTDM_MR2_ADDR, [UARTDM_IMR] = UARTDM_IMR_ADDR, [UARTDM_SR] = UARTDM_SR_ADDR, [UARTDM_CR] = UARTDM_CR_ADDR, [UARTDM_CSR] = UARTDM_CSR_ADDR, [UARTDM_IPR] = UARTDM_IPR_ADDR, [UARTDM_ISR] = UARTDM_ISR_ADDR, [UARTDM_RX_TOTAL_SNAP] = UARTDM_RX_TOTAL_SNAP_ADDR, [UARTDM_TFWR] = UARTDM_TFWR_ADDR, [UARTDM_RFWR] = UARTDM_RFWR_ADDR, [UARTDM_RF] = UARTDM_RF_ADDR, [UARTDM_TF] = UARTDM_TF_ADDR, [UARTDM_MISR] = UARTDM_MISR_ADDR, [UARTDM_DMRX] = UARTDM_DMRX_ADDR, [UARTDM_NCF_TX] = UARTDM_NCF_TX_ADDR, [UARTDM_DMEN] = UARTDM_DMEN_ADDR, [UARTDM_TXFS] = UARTDM_TXFS_ADDR, [UARTDM_RXFS] = UARTDM_RXFS_ADDR, }, [UARTDM_VERSION_14] = { [UARTDM_MR1] = 0x0, [UARTDM_MR2] = 0x4, [UARTDM_IMR] = 0xb0, [UARTDM_SR] = 0xa4, [UARTDM_CR] = 0xa8, [UARTDM_CSR] = 0xa0, [UARTDM_IPR] = 0x18, [UARTDM_ISR] = 0xb4, [UARTDM_RX_TOTAL_SNAP] = 0xbc, [UARTDM_TFWR] = 0x1c, [UARTDM_RFWR] = 0x20, [UARTDM_RF] = 0x140, [UARTDM_TF] = 0x100, [UARTDM_MISR] = 0xac, [UARTDM_DMRX] = 0x34, [UARTDM_NCF_TX] = 0x40, [UARTDM_DMEN] = 0x3c, [UARTDM_TXFS] = 0x4c, [UARTDM_RXFS] = 0x50, }, }; static struct of_device_id msm_hsl_match_table[] = { { .compatible = "qcom,msm-lsuart-v14", .data = (void *)UARTDM_VERSION_14 }, {} }; #ifdef CONFIG_SERIAL_MSM_HSL_CONSOLE static int get_console_state(struct uart_port *port); #else static inline int get_console_state(struct uart_port *port) { return -ENODEV; }; #endif static struct dentry *debug_base; static inline void wait_for_xmitr(struct uart_port *port); static inline void msm_hsl_write(struct uart_port *port, unsigned int val, unsigned int off) { iowrite32(val, port->membase + off); } static inline unsigned int msm_hsl_read(struct uart_port *port, unsigned int off) { return ioread32(port->membase + off); } static unsigned int msm_serial_hsl_has_gsbi(struct uart_port *port) { return (UART_TO_MSM(port)->uart_type == GSBI_HSUART); } /** * set_gsbi_uart_func_mode: Check the currently used GSBI UART mode * and set the new required GSBI UART Mode if it is different. * @port: uart port */ static void set_gsbi_uart_func_mode(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); unsigned int set_gsbi_uart_mode = GSBI_PROTOCOL_I2C_UART; unsigned int cur_gsbi_uart_mode; if (msm_hsl_port->func_mode == UART_FOUR_WIRE) set_gsbi_uart_mode = GSBI_PROTOCOL_UART; if (msm_hsl_port->pclk) clk_prepare_enable(msm_hsl_port->pclk); /* Read current used GSBI UART Mode and set only if it is different. */ cur_gsbi_uart_mode = ioread32(msm_hsl_port->mapped_gsbi + GSBI_CONTROL_ADDR); if ((cur_gsbi_uart_mode & set_gsbi_uart_mode) != set_gsbi_uart_mode) /* * Programmed GSBI based UART protocol mode i.e. I2C/UART * Shared Mode or UART Mode. */ iowrite32(set_gsbi_uart_mode, msm_hsl_port->mapped_gsbi + GSBI_CONTROL_ADDR); if (msm_hsl_port->pclk) clk_disable_unprepare(msm_hsl_port->pclk); } /** * msm_hsl_config_uart_tx_rx_gpios - Configures UART Tx and RX GPIOs * @port: uart port */ static int msm_hsl_config_uart_tx_rx_gpios(struct uart_port *port) { struct platform_device *pdev = to_platform_device(port->dev); const struct msm_serial_hslite_platform_data *pdata = pdev->dev.platform_data; int ret; if (pdata) { ret = gpio_request(pdata->uart_tx_gpio, "UART_TX_GPIO"); if (unlikely(ret)) { pr_err("gpio request failed for:%d\n", pdata->uart_tx_gpio); goto exit_uart_config; } ret = gpio_request(pdata->uart_rx_gpio, "UART_RX_GPIO"); if (unlikely(ret)) { pr_err("gpio request failed for:%d\n", pdata->uart_rx_gpio); gpio_free(pdata->uart_tx_gpio); goto exit_uart_config; } } else { pr_err("Pdata is NULL.\n"); ret = -EINVAL; } exit_uart_config: return ret; } /** * msm_hsl_unconfig_uart_tx_rx_gpios: Unconfigures UART Tx and RX GPIOs * @port: uart port */ static void msm_hsl_unconfig_uart_tx_rx_gpios(struct uart_port *port) { struct platform_device *pdev = to_platform_device(port->dev); const struct msm_serial_hslite_platform_data *pdata = pdev->dev.platform_data; if (pdata) { gpio_free(pdata->uart_tx_gpio); gpio_free(pdata->uart_rx_gpio); } else { pr_err("Error:Pdata is NULL.\n"); } } /** * msm_hsl_config_uart_hwflow_gpios: Configures UART HWFlow GPIOs * @port: uart port */ static int msm_hsl_config_uart_hwflow_gpios(struct uart_port *port) { struct platform_device *pdev = to_platform_device(port->dev); const struct msm_serial_hslite_platform_data *pdata = pdev->dev.platform_data; int ret = -EINVAL; if (pdata) { ret = gpio_request(pdata->uart_cts_gpio, "UART_CTS_GPIO"); if (unlikely(ret)) { pr_err("gpio request failed for:%d\n", pdata->uart_cts_gpio); goto exit_config_uart; } ret = gpio_request(pdata->uart_rfr_gpio, "UART_RFR_GPIO"); if (unlikely(ret)) { pr_err("gpio request failed for:%d\n", pdata->uart_rfr_gpio); gpio_free(pdata->uart_cts_gpio); goto exit_config_uart; } } else { pr_err("Error: Pdata is NULL.\n"); } exit_config_uart: return ret; } /** * msm_hsl_unconfig_uart_hwflow_gpios: Unonfigures UART HWFlow GPIOs * @port: uart port */ static void msm_hsl_unconfig_uart_hwflow_gpios(struct uart_port *port) { struct platform_device *pdev = to_platform_device(port->dev); const struct msm_serial_hslite_platform_data *pdata = pdev->dev.platform_data; if (pdata) { gpio_free(pdata->uart_cts_gpio); gpio_free(pdata->uart_rfr_gpio); } else { pr_err("Error: Pdata is NULL.\n"); } } /** * msm_hsl_config_uart_gpios: Configures UART GPIOs and returns success or * Failure * @port: uart port */ static int msm_hsl_config_uart_gpios(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); int ret; /* Configure UART Tx and Rx GPIOs */ ret = msm_hsl_config_uart_tx_rx_gpios(port); if (!ret) { if (msm_hsl_port->func_mode == UART_FOUR_WIRE) { /*if 4-wire uart, configure CTS and RFR GPIOs */ ret = msm_hsl_config_uart_hwflow_gpios(port); if (ret) msm_hsl_unconfig_uart_tx_rx_gpios(port); } } else { msm_hsl_unconfig_uart_tx_rx_gpios(port); } return ret; } /** * msm_hsl_unconfig_uart_gpios: Unconfigures UART GPIOs * @port: uart port */ static void msm_hsl_unconfig_uart_gpios(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); msm_hsl_unconfig_uart_tx_rx_gpios(port); if (msm_hsl_port->func_mode == UART_FOUR_WIRE) msm_hsl_unconfig_uart_hwflow_gpios(port); } static int get_line(struct platform_device *pdev) { struct msm_hsl_port *msm_hsl_port = platform_get_drvdata(pdev); return msm_hsl_port->uart.line; } static int bus_vote(uint32_t client, int vector) { int ret = 0; if (!client) return ret; pr_debug("Voting for bus scaling:%d\n", vector); ret = msm_bus_scale_client_update_request(client, vector); if (ret) pr_err("Failed to request bus bw vector %d\n", vector); return ret; } static int clk_en(struct uart_port *port, int enable) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); int ret = 0; if (enable) { msm_hsl_port->clk_enable_count++; ret = bus_vote(msm_hsl_port->bus_perf_client, !!msm_hsl_port->clk_enable_count); if (ret) goto err; ret = clk_prepare_enable(msm_hsl_port->clk); if (ret) goto err_bus; if (msm_hsl_port->pclk) { ret = clk_prepare_enable(msm_hsl_port->pclk); if (ret) goto err_clk_disable; } } else { msm_hsl_port->clk_enable_count--; clk_disable_unprepare(msm_hsl_port->clk); if (msm_hsl_port->pclk) clk_disable_unprepare(msm_hsl_port->pclk); ret = bus_vote(msm_hsl_port->bus_perf_client, !!msm_hsl_port->clk_enable_count); } return ret; err_clk_disable: clk_disable_unprepare(msm_hsl_port->clk); err_bus: bus_vote(msm_hsl_port->bus_perf_client, !!(msm_hsl_port->clk_enable_count - 1)); err: msm_hsl_port->clk_enable_count--; return ret; } static int msm_hsl_loopback_enable_set(void *data, u64 val) { struct msm_hsl_port *msm_hsl_port = data; struct uart_port *port = &(msm_hsl_port->uart); unsigned int vid; unsigned long flags; int ret = 0; ret = clk_set_rate(msm_hsl_port->clk, port->uartclk); if (!ret) { clk_en(port, 1); } else { pr_err("Error: setting uartclk rate as %u\n", port->uartclk); return -EINVAL; } vid = msm_hsl_port->ver_id; if (val) { spin_lock_irqsave(&port->lock, flags); ret = msm_hsl_read(port, regmap[vid][UARTDM_MR2]); ret |= UARTDM_MR2_LOOP_MODE_BMSK; msm_hsl_write(port, ret, regmap[vid][UARTDM_MR2]); spin_unlock_irqrestore(&port->lock, flags); } else { spin_lock_irqsave(&port->lock, flags); ret = msm_hsl_read(port, regmap[vid][UARTDM_MR2]); ret &= ~UARTDM_MR2_LOOP_MODE_BMSK; msm_hsl_write(port, ret, regmap[vid][UARTDM_MR2]); spin_unlock_irqrestore(&port->lock, flags); } clk_en(port, 0); return 0; } static int msm_hsl_loopback_enable_get(void *data, u64 *val) { struct msm_hsl_port *msm_hsl_port = data; struct uart_port *port = &(msm_hsl_port->uart); unsigned long flags; int ret = 0; ret = clk_set_rate(msm_hsl_port->clk, port->uartclk); if (!ret) { clk_en(port, 1); } else { pr_err("Error setting uartclk rate as %u\n", port->uartclk); return -EINVAL; } spin_lock_irqsave(&port->lock, flags); ret = msm_hsl_read(port, regmap[msm_hsl_port->ver_id][UARTDM_MR2]); spin_unlock_irqrestore(&port->lock, flags); clk_en(port, 0); *val = (ret & UARTDM_MR2_LOOP_MODE_BMSK) ? 1 : 0; return 0; } DEFINE_SIMPLE_ATTRIBUTE(loopback_enable_fops, msm_hsl_loopback_enable_get, msm_hsl_loopback_enable_set, "%llu\n"); /* * msm_serial_hsl debugfs node: /msm_serial_hsl/loopback. * writing 1 turns on internal loopback mode in HW. Useful for automation * test scripts. * writing 0 disables the internal loopback mode. Default is disabled. */ static void msm_hsl_debugfs_init(struct msm_hsl_port *msm_uport, int id) { char node_name[15]; snprintf(node_name, sizeof(node_name), "loopback.%d", id); msm_uport->loopback_dir = debugfs_create_file(node_name, S_IRUGO | S_IWUSR, debug_base, msm_uport, &loopback_enable_fops); if (IS_ERR_OR_NULL(msm_uport->loopback_dir)) pr_err("Cannot create loopback.%d debug entry", id); } static void msm_hsl_stop_tx(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); msm_hsl_port->imr &= ~UARTDM_ISR_TXLEV_BMSK; msm_hsl_write(port, msm_hsl_port->imr, regmap[msm_hsl_port->ver_id][UARTDM_IMR]); } static void msm_hsl_start_tx(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); msm_hsl_port->imr |= UARTDM_ISR_TXLEV_BMSK; msm_hsl_write(port, msm_hsl_port->imr, regmap[msm_hsl_port->ver_id][UARTDM_IMR]); } static void msm_hsl_stop_rx(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); msm_hsl_port->imr &= ~(UARTDM_ISR_RXLEV_BMSK | UARTDM_ISR_RXSTALE_BMSK); msm_hsl_write(port, msm_hsl_port->imr, regmap[msm_hsl_port->ver_id][UARTDM_IMR]); } static void msm_hsl_enable_ms(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); msm_hsl_port->imr |= UARTDM_ISR_DELTA_CTS_BMSK; msm_hsl_write(port, msm_hsl_port->imr, regmap[msm_hsl_port->ver_id][UARTDM_IMR]); } static void handle_rx(struct uart_port *port, unsigned int misr) { struct tty_struct *tty = port->state->port.tty; unsigned int vid; unsigned int sr; int count = 0; struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); vid = msm_hsl_port->ver_id; /* * Handle overrun. My understanding of the hardware is that overrun * is not tied to the RX buffer, so we handle the case out of band. */ if ((msm_hsl_read(port, regmap[vid][UARTDM_SR]) & UARTDM_SR_OVERRUN_BMSK)) { port->icount.overrun++; tty_insert_flip_char(tty, 0, TTY_OVERRUN); msm_hsl_write(port, RESET_ERROR_STATUS, regmap[vid][UARTDM_CR]); } if (misr & UARTDM_ISR_RXSTALE_BMSK) { count = msm_hsl_read(port, regmap[vid][UARTDM_RX_TOTAL_SNAP]) - msm_hsl_port->old_snap_state; msm_hsl_port->old_snap_state = 0; } else { count = 4 * (msm_hsl_read(port, regmap[vid][UARTDM_RFWR])); msm_hsl_port->old_snap_state += count; } /* and now the main RX loop */ while (count > 0) { unsigned int c; char flag = TTY_NORMAL; sr = msm_hsl_read(port, regmap[vid][UARTDM_SR]); if ((sr & UARTDM_SR_RXRDY_BMSK) == 0) { msm_hsl_port->old_snap_state -= count; break; } c = msm_hsl_read(port, regmap[vid][UARTDM_RF]); if (sr & UARTDM_SR_RX_BREAK_BMSK) { port->icount.brk++; if (uart_handle_break(port)) continue; } else if (sr & UARTDM_SR_PAR_FRAME_BMSK) { port->icount.frame++; } else { port->icount.rx++; } /* Mask conditions we're ignorning. */ sr &= port->read_status_mask; if (sr & UARTDM_SR_RX_BREAK_BMSK) flag = TTY_BREAK; else if (sr & UARTDM_SR_PAR_FRAME_BMSK) flag = TTY_FRAME; /* TODO: handle sysrq */ /* if (!uart_handle_sysrq_char(port, c)) */ tty_insert_flip_string(tty, (char *) &c, (count > 4) ? 4 : count); count -= 4; } tty_flip_buffer_push(tty); } static void handle_tx(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; int sent_tx; int tx_count; int x; unsigned int tf_pointer = 0; unsigned int vid; vid = UART_TO_MSM(port)->ver_id; tx_count = uart_circ_chars_pending(xmit); if (tx_count > (UART_XMIT_SIZE - xmit->tail)) tx_count = UART_XMIT_SIZE - xmit->tail; if (tx_count >= port->fifosize) tx_count = port->fifosize; /* Handle x_char */ if (port->x_char) { wait_for_xmitr(port); msm_hsl_write(port, tx_count + 1, regmap[vid][UARTDM_NCF_TX]); msm_hsl_read(port, regmap[vid][UARTDM_NCF_TX]); msm_hsl_write(port, port->x_char, regmap[vid][UARTDM_TF]); port->icount.tx++; port->x_char = 0; } else if (tx_count) { wait_for_xmitr(port); msm_hsl_write(port, tx_count, regmap[vid][UARTDM_NCF_TX]); msm_hsl_read(port, regmap[vid][UARTDM_NCF_TX]); } if (!tx_count) { msm_hsl_stop_tx(port); return; } while (tf_pointer < tx_count) { if (unlikely(!(msm_hsl_read(port, regmap[vid][UARTDM_SR]) & UARTDM_SR_TXRDY_BMSK))) continue; switch (tx_count - tf_pointer) { case 1: { x = xmit->buf[xmit->tail]; port->icount.tx++; break; } case 2: { x = xmit->buf[xmit->tail] | xmit->buf[xmit->tail+1] << 8; port->icount.tx += 2; break; } case 3: { x = xmit->buf[xmit->tail] | xmit->buf[xmit->tail+1] << 8 | xmit->buf[xmit->tail + 2] << 16; port->icount.tx += 3; break; } default: { x = *((int *)&(xmit->buf[xmit->tail])); port->icount.tx += 4; break; } } msm_hsl_write(port, x, regmap[vid][UARTDM_TF]); xmit->tail = ((tx_count - tf_pointer < 4) ? (tx_count - tf_pointer + xmit->tail) : (xmit->tail + 4)) & (UART_XMIT_SIZE - 1); tf_pointer += 4; sent_tx = 1; } if (uart_circ_empty(xmit)) msm_hsl_stop_tx(port); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); } static void handle_delta_cts(struct uart_port *port) { unsigned int vid = UART_TO_MSM(port)->ver_id; msm_hsl_write(port, RESET_CTS, regmap[vid][UARTDM_CR]); port->icount.cts++; wake_up_interruptible(&port->state->port.delta_msr_wait); } static irqreturn_t msm_hsl_irq(int irq, void *dev_id) { struct uart_port *port = dev_id; struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); unsigned int vid; unsigned int misr; unsigned long flags; spin_lock_irqsave(&port->lock, flags); vid = msm_hsl_port->ver_id; misr = msm_hsl_read(port, regmap[vid][UARTDM_MISR]); /* disable interrupt */ msm_hsl_write(port, 0, regmap[vid][UARTDM_IMR]); if (misr & (UARTDM_ISR_RXSTALE_BMSK | UARTDM_ISR_RXLEV_BMSK)) { handle_rx(port, misr); if (misr & (UARTDM_ISR_RXSTALE_BMSK)) msm_hsl_write(port, RESET_STALE_INT, regmap[vid][UARTDM_CR]); msm_hsl_write(port, 6500, regmap[vid][UARTDM_DMRX]); msm_hsl_write(port, STALE_EVENT_ENABLE, regmap[vid][UARTDM_CR]); } if (misr & UARTDM_ISR_TXLEV_BMSK) handle_tx(port); if (misr & UARTDM_ISR_DELTA_CTS_BMSK) handle_delta_cts(port); /* restore interrupt */ msm_hsl_write(port, msm_hsl_port->imr, regmap[vid][UARTDM_IMR]); spin_unlock_irqrestore(&port->lock, flags); return IRQ_HANDLED; } static unsigned int msm_hsl_tx_empty(struct uart_port *port) { unsigned int ret; unsigned int vid = UART_TO_MSM(port)->ver_id; ret = (msm_hsl_read(port, regmap[vid][UARTDM_SR]) & UARTDM_SR_TXEMT_BMSK) ? TIOCSER_TEMT : 0; return ret; } static void msm_hsl_reset(struct uart_port *port) { unsigned int vid = UART_TO_MSM(port)->ver_id; /* reset everything */ msm_hsl_write(port, RESET_RX, regmap[vid][UARTDM_CR]); msm_hsl_write(port, RESET_TX, regmap[vid][UARTDM_CR]); msm_hsl_write(port, RESET_ERROR_STATUS, regmap[vid][UARTDM_CR]); msm_hsl_write(port, RESET_BREAK_INT, regmap[vid][UARTDM_CR]); msm_hsl_write(port, RESET_CTS, regmap[vid][UARTDM_CR]); msm_hsl_write(port, RFR_LOW, regmap[vid][UARTDM_CR]); } static unsigned int msm_hsl_get_mctrl(struct uart_port *port) { return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS; } static void msm_hsl_set_mctrl(struct uart_port *port, unsigned int mctrl) { unsigned int vid = UART_TO_MSM(port)->ver_id; unsigned int mr; unsigned int loop_mode; mr = msm_hsl_read(port, regmap[vid][UARTDM_MR1]); if (!(mctrl & TIOCM_RTS)) { mr &= ~UARTDM_MR1_RX_RDY_CTL_BMSK; msm_hsl_write(port, mr, regmap[vid][UARTDM_MR1]); msm_hsl_write(port, RFR_HIGH, regmap[vid][UARTDM_CR]); } else { mr |= UARTDM_MR1_RX_RDY_CTL_BMSK; msm_hsl_write(port, mr, regmap[vid][UARTDM_MR1]); } loop_mode = TIOCM_LOOP & mctrl; if (loop_mode) { mr = msm_hsl_read(port, regmap[vid][UARTDM_MR2]); mr |= UARTDM_MR2_LOOP_MODE_BMSK; msm_hsl_write(port, mr, regmap[vid][UARTDM_MR2]); /* Reset TX */ msm_hsl_reset(port); /* Turn on Uart Receiver & Transmitter*/ msm_hsl_write(port, UARTDM_CR_RX_EN_BMSK | UARTDM_CR_TX_EN_BMSK, regmap[vid][UARTDM_CR]); } } static void msm_hsl_break_ctl(struct uart_port *port, int break_ctl) { unsigned int vid = UART_TO_MSM(port)->ver_id; if (break_ctl) msm_hsl_write(port, START_BREAK, regmap[vid][UARTDM_CR]); else msm_hsl_write(port, STOP_BREAK, regmap[vid][UARTDM_CR]); } /** * msm_hsl_set_baud_rate: set requested baud rate * @port: uart port * @baud: baud rate to set (in bps) */ static void msm_hsl_set_baud_rate(struct uart_port *port, unsigned int baud) { unsigned int baud_code, rxstale, watermark; unsigned int data; unsigned int vid; struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); switch (baud) { case 300: baud_code = UARTDM_CSR_75; rxstale = 1; break; case 600: baud_code = UARTDM_CSR_150; rxstale = 1; break; case 1200: baud_code = UARTDM_CSR_300; rxstale = 1; break; case 2400: baud_code = UARTDM_CSR_600; rxstale = 1; break; case 4800: baud_code = UARTDM_CSR_1200; rxstale = 1; break; case 9600: baud_code = UARTDM_CSR_2400; rxstale = 2; break; case 14400: baud_code = UARTDM_CSR_3600; rxstale = 3; break; case 19200: baud_code = UARTDM_CSR_4800; rxstale = 4; break; case 28800: baud_code = UARTDM_CSR_7200; rxstale = 6; break; case 38400: baud_code = UARTDM_CSR_9600; rxstale = 8; break; case 57600: baud_code = UARTDM_CSR_14400; rxstale = 16; break; case 115200: baud_code = UARTDM_CSR_28800; rxstale = 31; break; case 230400: baud_code = UARTDM_CSR_57600; rxstale = 31; break; case 460800: baud_code = UARTDM_CSR_115200; rxstale = 31; break; case 4000000: case 3686400: case 3200000: case 3500000: case 3000000: case 2500000: case 1500000: case 1152000: case 1000000: case 921600: baud_code = 0xff; rxstale = 31; break; default: /*115200 baud rate */ baud_code = UARTDM_CSR_28800; rxstale = 31; break; } vid = msm_hsl_port->ver_id; msm_hsl_write(port, baud_code, regmap[vid][UARTDM_CSR]); /* * uart baud rate depends on CSR and MND Values * we are updating CSR before and then calling * clk_set_rate which updates MND Values. Hence * dsb requires here. */ mb(); /* * Check requested baud rate and for higher baud rate than 460800, * calculate required uart clock frequency and set the same. */ if (baud > 460800) port->uartclk = baud * 16; else port->uartclk = 7372800; if (clk_set_rate(msm_hsl_port->clk, port->uartclk)) { pr_err("Error: setting uartclk rate %u\n", port->uartclk); WARN_ON(1); return; } /* Set timeout to be ~600x the character transmit time */ msm_hsl_port->tx_timeout = (1000000000 / baud) * 6; /* RX stale watermark */ watermark = UARTDM_IPR_STALE_LSB_BMSK & rxstale; watermark |= UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK & (rxstale << 2); msm_hsl_write(port, watermark, regmap[vid][UARTDM_IPR]); /* Set RX watermark * Configure Rx Watermark as 3/4 size of Rx FIFO. * RFWR register takes value in Words for UARTDM Core * whereas it is consider to be in Bytes for UART Core. * Hence configuring Rx Watermark as 48 Words. */ watermark = (port->fifosize * 3) / 4; msm_hsl_write(port, watermark, regmap[vid][UARTDM_RFWR]); /* set TX watermark */ msm_hsl_write(port, 0, regmap[vid][UARTDM_TFWR]); msm_hsl_write(port, CR_PROTECTION_EN, regmap[vid][UARTDM_CR]); msm_hsl_reset(port); data = UARTDM_CR_TX_EN_BMSK; data |= UARTDM_CR_RX_EN_BMSK; /* enable TX & RX */ msm_hsl_write(port, data, regmap[vid][UARTDM_CR]); msm_hsl_write(port, RESET_STALE_INT, regmap[vid][UARTDM_CR]); /* turn on RX and CTS interrupts */ msm_hsl_port->imr = UARTDM_ISR_RXSTALE_BMSK | UARTDM_ISR_DELTA_CTS_BMSK | UARTDM_ISR_RXLEV_BMSK; msm_hsl_write(port, msm_hsl_port->imr, regmap[vid][UARTDM_IMR]); msm_hsl_write(port, 6500, regmap[vid][UARTDM_DMRX]); msm_hsl_write(port, STALE_EVENT_ENABLE, regmap[vid][UARTDM_CR]); } static void msm_hsl_init_clock(struct uart_port *port) { clk_en(port, 1); } static void msm_hsl_deinit_clock(struct uart_port *port) { clk_en(port, 0); } static int msm_hsl_startup(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); struct platform_device *pdev = to_platform_device(port->dev); const struct msm_serial_hslite_platform_data *pdata = pdev->dev.platform_data; unsigned int data, rfr_level; unsigned int vid; int ret; unsigned long flags; snprintf(msm_hsl_port->name, sizeof(msm_hsl_port->name), "msm_serial_hsl%d", port->line); if (!(is_console(port)) || (!port->cons) || (port->cons && (!(port->cons->flags & CON_ENABLED)))) { if (msm_serial_hsl_has_gsbi(port)) set_gsbi_uart_func_mode(port); if (pdata && pdata->use_pm) wake_lock(&msm_hsl_port->port_open_wake_lock); if (pdata && pdata->config_gpio) { ret = msm_hsl_config_uart_gpios(port); if (ret) { msm_hsl_unconfig_uart_gpios(port); goto release_wakelock; } } } /* * Set RFR Level as 3/4 of UARTDM FIFO Size * i.e. 48 Words = 192 bytes as Rx FIFO is 64 words ( 256 bytes). */ if (likely(port->fifosize > 48)) rfr_level = port->fifosize - 16; else rfr_level = port->fifosize; spin_lock_irqsave(&port->lock, flags); vid = msm_hsl_port->ver_id; /* set automatic RFR level */ data = msm_hsl_read(port, regmap[vid][UARTDM_MR1]); data &= ~UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK; data &= ~UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK; data |= UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK & (rfr_level << 2); data |= UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK & rfr_level; msm_hsl_write(port, data, regmap[vid][UARTDM_MR1]); spin_unlock_irqrestore(&port->lock, flags); ret = request_irq(port->irq, msm_hsl_irq, IRQF_TRIGGER_HIGH, msm_hsl_port->name, port); if (unlikely(ret)) { pr_err("failed to request_irq\n"); msm_hsl_unconfig_uart_gpios(port); goto release_wakelock; } return ret; release_wakelock: if (pdata && pdata->use_pm) wake_unlock(&msm_hsl_port->port_open_wake_lock); return ret; } static void msm_hsl_shutdown(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); struct platform_device *pdev = to_platform_device(port->dev); const struct msm_serial_hslite_platform_data *pdata = pdev->dev.platform_data; msm_hsl_port->imr = 0; /* disable interrupts */ msm_hsl_write(port, 0, regmap[msm_hsl_port->ver_id][UARTDM_IMR]); free_irq(port->irq, port); if (!(is_console(port)) || (!port->cons) || (port->cons && (!(port->cons->flags & CON_ENABLED)))) { /* Free UART GPIOs */ if (pdata && pdata->config_gpio) msm_hsl_unconfig_uart_gpios(port); if (pdata && pdata->use_pm) wake_unlock(&msm_hsl_port->port_open_wake_lock); } } static void msm_hsl_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { unsigned int baud, mr; unsigned int vid; struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); if (!termios->c_cflag) return; mutex_lock(&msm_hsl_port->clk_mutex); /* * Calculate and set baud rate * 300 is the minimum and 4 Mbps is the maximum baud rate * supported by driver. */ baud = uart_get_baud_rate(port, termios, old, 200, 4000000); /* * Due to non-availability of 3.2 Mbps baud rate as standard baud rate * with TTY/serial core. Map 200 BAUD to 3.2 Mbps */ if (baud == 200) baud = 3200000; msm_hsl_set_baud_rate(port, baud); vid = UART_TO_MSM(port)->ver_id; /* calculate parity */ mr = msm_hsl_read(port, regmap[vid][UARTDM_MR2]); mr &= ~UARTDM_MR2_PARITY_MODE_BMSK; if (termios->c_cflag & PARENB) { if (termios->c_cflag & PARODD) mr |= ODD_PARITY; else if (termios->c_cflag & CMSPAR) mr |= SPACE_PARITY; else mr |= EVEN_PARITY; } /* calculate bits per char */ mr &= ~UARTDM_MR2_BITS_PER_CHAR_BMSK; switch (termios->c_cflag & CSIZE) { case CS5: mr |= FIVE_BPC; break; case CS6: mr |= SIX_BPC; break; case CS7: mr |= SEVEN_BPC; break; case CS8: default: mr |= EIGHT_BPC; break; } /* calculate stop bits */ mr &= ~(STOP_BIT_ONE | STOP_BIT_TWO); if (termios->c_cflag & CSTOPB) mr |= STOP_BIT_TWO; else mr |= STOP_BIT_ONE; /* set parity, bits per char, and stop bit */ msm_hsl_write(port, mr, regmap[vid][UARTDM_MR2]); /* calculate and set hardware flow control */ mr = msm_hsl_read(port, regmap[vid][UARTDM_MR1]); mr &= ~(UARTDM_MR1_CTS_CTL_BMSK | UARTDM_MR1_RX_RDY_CTL_BMSK); if (termios->c_cflag & CRTSCTS) { mr |= UARTDM_MR1_CTS_CTL_BMSK; mr |= UARTDM_MR1_RX_RDY_CTL_BMSK; } msm_hsl_write(port, mr, regmap[vid][UARTDM_MR1]); /* Configure status bits to ignore based on termio flags. */ port->read_status_mask = 0; if (termios->c_iflag & INPCK) port->read_status_mask |= UARTDM_SR_PAR_FRAME_BMSK; if (termios->c_iflag & (BRKINT | PARMRK)) port->read_status_mask |= UARTDM_SR_RX_BREAK_BMSK; uart_update_timeout(port, termios->c_cflag, baud); mutex_unlock(&msm_hsl_port->clk_mutex); } static const char *msm_hsl_type(struct uart_port *port) { return "MSM"; } static void msm_hsl_release_port(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); struct platform_device *pdev = to_platform_device(port->dev); struct resource *uart_resource; resource_size_t size; uart_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uartdm_resource"); if (!uart_resource) uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (unlikely(!uart_resource)) return; size = uart_resource->end - uart_resource->start + 1; release_mem_region(port->mapbase, size); iounmap(port->membase); port->membase = NULL; if (msm_serial_hsl_has_gsbi(port)) { iowrite32(GSBI_PROTOCOL_IDLE, msm_hsl_port->mapped_gsbi + GSBI_CONTROL_ADDR); iounmap(msm_hsl_port->mapped_gsbi); msm_hsl_port->mapped_gsbi = NULL; } } static int msm_hsl_request_port(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); struct platform_device *pdev = to_platform_device(port->dev); struct resource *uart_resource; struct resource *gsbi_resource; resource_size_t size; uart_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uartdm_resource"); if (!uart_resource) uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (unlikely(!uart_resource)) { pr_err("can't get uartdm resource\n"); return -ENXIO; } size = uart_resource->end - uart_resource->start + 1; if (unlikely(!request_mem_region(port->mapbase, size, "msm_serial_hsl"))) { pr_err("can't get mem region for uartdm\n"); return -EBUSY; } port->membase = ioremap(port->mapbase, size); if (!port->membase) { release_mem_region(port->mapbase, size); return -EBUSY; } if (msm_serial_hsl_has_gsbi(port)) { gsbi_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gsbi_resource"); if (!gsbi_resource) gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (unlikely(!gsbi_resource)) { pr_err("can't get gsbi resource\n"); return -ENXIO; } size = gsbi_resource->end - gsbi_resource->start + 1; msm_hsl_port->mapped_gsbi = ioremap(gsbi_resource->start, size); if (!msm_hsl_port->mapped_gsbi) { return -EBUSY; } } return 0; } static void msm_hsl_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE) { port->type = PORT_MSM; if (msm_hsl_request_port(port)) return; } /* Configure required GSBI based UART protocol. */ if (msm_serial_hsl_has_gsbi(port)) set_gsbi_uart_func_mode(port); } static int msm_hsl_verify_port(struct uart_port *port, struct serial_struct *ser) { if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM)) return -EINVAL; if (unlikely(port->irq != ser->irq)) return -EINVAL; return 0; } static void msm_hsl_power(struct uart_port *port, unsigned int state, unsigned int oldstate) { int ret; struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); struct platform_device *pdev = to_platform_device(port->dev); const struct msm_serial_hslite_platform_data *pdata = pdev->dev.platform_data; switch (state) { case 0: ret = clk_set_rate(msm_hsl_port->clk, port->uartclk); if (ret) pr_err("Error setting UART clock rate to %u\n", port->uartclk); clk_en(port, 1); break; case 3: clk_en(port, 0); if (pdata && pdata->set_uart_clk_zero) { ret = clk_set_rate(msm_hsl_port->clk, 0); if (ret) pr_err("Error setting UART clock rate to zero.\n"); } break; default: pr_err("Unknown PM state %d\n", state); } } static struct uart_ops msm_hsl_uart_pops = { .tx_empty = msm_hsl_tx_empty, .set_mctrl = msm_hsl_set_mctrl, .get_mctrl = msm_hsl_get_mctrl, .stop_tx = msm_hsl_stop_tx, .start_tx = msm_hsl_start_tx, .stop_rx = msm_hsl_stop_rx, .enable_ms = msm_hsl_enable_ms, .break_ctl = msm_hsl_break_ctl, .startup = msm_hsl_startup, .shutdown = msm_hsl_shutdown, .set_termios = msm_hsl_set_termios, .type = msm_hsl_type, .release_port = msm_hsl_release_port, .request_port = msm_hsl_request_port, .config_port = msm_hsl_config_port, .verify_port = msm_hsl_verify_port, .pm = msm_hsl_power, }; static struct msm_hsl_port msm_hsl_uart_ports[] = { { .uart = { .iotype = UPIO_MEM, .ops = &msm_hsl_uart_pops, .flags = UPF_BOOT_AUTOCONF, .fifosize = 64, .line = 0, }, }, { .uart = { .iotype = UPIO_MEM, .ops = &msm_hsl_uart_pops, .flags = UPF_BOOT_AUTOCONF, .fifosize = 64, .line = 1, }, }, { .uart = { .iotype = UPIO_MEM, .ops = &msm_hsl_uart_pops, .flags = UPF_BOOT_AUTOCONF, .fifosize = 64, .line = 2, }, }, }; #define UART_NR ARRAY_SIZE(msm_hsl_uart_ports) static inline struct uart_port *get_port_from_line(unsigned int line) { return &msm_hsl_uart_ports[line].uart; } static unsigned int msm_hsl_console_state[8]; static void dump_hsl_regs(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); unsigned int vid = msm_hsl_port->ver_id; unsigned int sr, isr, mr1, mr2, ncf, txfs, rxfs, con_state; sr = msm_hsl_read(port, regmap[vid][UARTDM_SR]); isr = msm_hsl_read(port, regmap[vid][UARTDM_ISR]); mr1 = msm_hsl_read(port, regmap[vid][UARTDM_MR1]); mr2 = msm_hsl_read(port, regmap[vid][UARTDM_MR2]); ncf = msm_hsl_read(port, regmap[vid][UARTDM_NCF_TX]); txfs = msm_hsl_read(port, regmap[vid][UARTDM_TXFS]); rxfs = msm_hsl_read(port, regmap[vid][UARTDM_RXFS]); con_state = get_console_state(port); msm_hsl_console_state[0] = sr; msm_hsl_console_state[1] = isr; msm_hsl_console_state[2] = mr1; msm_hsl_console_state[3] = mr2; msm_hsl_console_state[4] = ncf; msm_hsl_console_state[5] = txfs; msm_hsl_console_state[6] = rxfs; msm_hsl_console_state[7] = con_state; pr_info("Timeout: %d uS\n", msm_hsl_port->tx_timeout); pr_info("SR: %08x\n", sr); pr_info("ISR: %08x\n", isr); pr_info("MR1: %08x\n", mr1); pr_info("MR2: %08x\n", mr2); pr_info("NCF: %08x\n", ncf); pr_info("TXFS: %08x\n", txfs); pr_info("RXFS: %08x\n", rxfs); pr_info("Console state: %d\n", con_state); } /* * Wait for transmitter & holding register to empty * Derived from wait_for_xmitr in 8250 serial driver by Russell King */ static void wait_for_xmitr(struct uart_port *port) { struct msm_hsl_port *msm_hsl_port = UART_TO_MSM(port); unsigned int vid = msm_hsl_port->ver_id; int count = 0; if (!(msm_hsl_read(port, regmap[vid][UARTDM_SR]) & UARTDM_SR_TXEMT_BMSK)) { while (!(msm_hsl_read(port, regmap[vid][UARTDM_ISR]) & UARTDM_ISR_TX_READY_BMSK) && !(msm_hsl_read(port, regmap[vid][UARTDM_SR]) & UARTDM_SR_TXEMT_BMSK)) { udelay(1); touch_nmi_watchdog(); cpu_relax(); if (++count == msm_hsl_port->tx_timeout) { dump_hsl_regs(port); panic("MSM HSL wait_for_xmitr is stuck!"); } } msm_hsl_write(port, CLEAR_TX_READY, regmap[vid][UARTDM_CR]); } } #ifdef CONFIG_SERIAL_MSM_HSL_CONSOLE static void msm_hsl_console_putchar(struct uart_port *port, int ch) { unsigned int vid = UART_TO_MSM(port)->ver_id; wait_for_xmitr(port); msm_hsl_write(port, 1, regmap[vid][UARTDM_NCF_TX]); /* * Dummy read to add 1 AHB clock delay to fix UART hardware bug. * Bug: Delay required on TX-transfer-init. after writing to * NO_CHARS_FOR_TX register. */ msm_hsl_read(port, regmap[vid][UARTDM_SR]); msm_hsl_write(port, ch, regmap[vid][UARTDM_TF]); } static void msm_hsl_console_write(struct console *co, const char *s, unsigned int count) { struct uart_port *port; struct msm_hsl_port *msm_hsl_port; unsigned int vid; int locked; BUG_ON(co->index < 0 || co->index >= UART_NR); port = get_port_from_line(co->index); msm_hsl_port = UART_TO_MSM(port); vid = msm_hsl_port->ver_id; /* not pretty, but we can end up here via various convoluted paths */ if (port->sysrq || oops_in_progress) locked = spin_trylock(&port->lock); else { locked = 1; spin_lock(&port->lock); } msm_hsl_write(port, 0, regmap[vid][UARTDM_IMR]); uart_console_write(port, s, count, msm_hsl_console_putchar); msm_hsl_write(port, msm_hsl_port->imr, regmap[vid][UARTDM_IMR]); if (locked == 1) spin_unlock(&port->lock); } static int msm_hsl_console_setup(struct console *co, char *options) { struct uart_port *port; unsigned int vid; int baud = 0, flow, bits, parity, mr2; int ret; if (unlikely(co->index >= UART_NR || co->index < 0)) return -ENXIO; port = get_port_from_line(co->index); vid = UART_TO_MSM(port)->ver_id; if (unlikely(!port->membase)) return -ENXIO; port->cons = co; pm_runtime_get_noresume(port->dev); #ifndef CONFIG_PM_RUNTIME msm_hsl_init_clock(port); #endif pm_runtime_resume(port->dev); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); bits = 8; parity = 'n'; flow = 'n'; msm_hsl_write(port, UARTDM_MR2_BITS_PER_CHAR_8 | STOP_BIT_ONE, regmap[vid][UARTDM_MR2]); /* 8N1 */ if (baud < 300 || baud > 115200) baud = 115200; msm_hsl_set_baud_rate(port, baud); ret = uart_set_options(port, co, baud, parity, bits, flow); mr2 = msm_hsl_read(port, regmap[vid][UARTDM_MR2]); mr2 |= UARTDM_MR2_RX_ERROR_CHAR_OFF; mr2 |= UARTDM_MR2_RX_BREAK_ZERO_CHAR_OFF; msm_hsl_write(port, mr2, regmap[vid][UARTDM_MR2]); msm_hsl_reset(port); /* Enable transmitter */ msm_hsl_write(port, CR_PROTECTION_EN, regmap[vid][UARTDM_CR]); msm_hsl_write(port, UARTDM_CR_TX_EN_BMSK, regmap[vid][UARTDM_CR]); msm_hsl_write(port, 1, regmap[vid][UARTDM_NCF_TX]); msm_hsl_read(port, regmap[vid][UARTDM_NCF_TX]); pr_info("console setup on port #%d\n", port->line); return ret; } static struct uart_driver msm_hsl_uart_driver; static struct console msm_hsl_console = { .name = "ttyHSL", .write = msm_hsl_console_write, .device = uart_console_device, .setup = msm_hsl_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &msm_hsl_uart_driver, }; #define MSM_HSL_CONSOLE (&msm_hsl_console) /* * get_console_state - check the per-port serial console state. * @port: uart_port structure describing the port * * Return the state of serial console availability on port. * return 1: If serial console is enabled on particular UART port. * return 0: If serial console is disabled on particular UART port. */ static int get_console_state(struct uart_port *port) { if (is_console(port) && (port->cons->flags & CON_ENABLED)) return 1; else return 0; } /* show_msm_console - provide per-port serial console state. */ static ssize_t show_msm_console(struct device *dev, struct device_attribute *attr, char *buf) { int enable; struct uart_port *port; struct platform_device *pdev = to_platform_device(dev); port = get_port_from_line(get_line(pdev)); enable = get_console_state(port); return snprintf(buf, sizeof(enable), "%d\n", enable); } /* * set_msm_console - allow to enable/disable serial console on port. * * writing 1 enables serial console on UART port. * writing 0 disables serial console on UART port. */ static ssize_t set_msm_console(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int enable, cur_state; struct uart_port *port; struct platform_device *pdev = to_platform_device(dev); port = get_port_from_line(get_line(pdev)); cur_state = get_console_state(port); enable = buf[0] - '0'; if (enable == cur_state) return count; switch (enable) { case 0: pr_debug("Calling stop_console\n"); console_stop(port->cons); pr_debug("Calling unregister_console\n"); unregister_console(port->cons); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); /* * Disable UART Core clk * 3 - to disable the UART clock * Thid parameter is not used here, but used in serial core. */ msm_hsl_power(port, 3, 1); break; case 1: pr_debug("Calling register_console\n"); /* * Disable UART Core clk * 0 - to enable the UART clock * Thid parameter is not used here, but used in serial core. */ msm_hsl_power(port, 0, 1); pm_runtime_enable(&pdev->dev); register_console(port->cons); break; default: return -EINVAL; } return count; } static DEVICE_ATTR(console, S_IWUSR | S_IRUGO, show_msm_console, set_msm_console); #else #define MSM_HSL_CONSOLE NULL #endif static struct uart_driver msm_hsl_uart_driver = { .owner = THIS_MODULE, .driver_name = "msm_serial_hsl", .dev_name = "ttyHSL", .nr = UART_NR, .cons = MSM_HSL_CONSOLE, }; static struct msm_serial_hslite_platform_data *msm_hsl_dt_to_pdata(struct platform_device *pdev) { int ret; struct device_node *node = pdev->dev.of_node; struct msm_serial_hslite_platform_data *pdata; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { pr_err("unable to allocate memory for platform data\n"); return ERR_PTR(-ENOMEM); } ret = of_property_read_u32(node, "qcom,config-gpio", &pdata->config_gpio); if (ret && ret != -EINVAL) { pr_err("Error with config_gpio property.\n"); return ERR_PTR(ret); } if (pdata->config_gpio) { pdata->uart_tx_gpio = of_get_named_gpio(node, "qcom,tx-gpio", 0); if (pdata->uart_tx_gpio < 0) return ERR_PTR(pdata->uart_tx_gpio); pdata->uart_rx_gpio = of_get_named_gpio(node, "qcom,rx-gpio", 0); if (pdata->uart_rx_gpio < 0) return ERR_PTR(pdata->uart_rx_gpio); /* check if 4-wire UART, then get cts/rfr GPIOs. */ if (pdata->config_gpio == 4) { pdata->uart_cts_gpio = of_get_named_gpio(node, "qcom,cts-gpio", 0); if (pdata->uart_cts_gpio < 0) return ERR_PTR(pdata->uart_cts_gpio); pdata->uart_rfr_gpio = of_get_named_gpio(node, "qcom,rfr-gpio", 0); if (pdata->uart_rfr_gpio < 0) return ERR_PTR(pdata->uart_rfr_gpio); } } pdata->use_pm = of_property_read_bool(node, "qcom,use-pm"); return pdata; } static atomic_t msm_serial_hsl_next_id = ATOMIC_INIT(0); static int __devinit msm_serial_hsl_probe(struct platform_device *pdev) { struct msm_hsl_port *msm_hsl_port; struct resource *uart_resource; struct resource *gsbi_resource; struct uart_port *port; struct msm_serial_hslite_platform_data *pdata; const struct of_device_id *match; u32 line; int ret; if (pdev->id == -1) pdev->id = atomic_inc_return(&msm_serial_hsl_next_id) - 1; /* Use line (ttyHSLx) number from pdata or device tree if specified */ pdata = pdev->dev.platform_data; if (pdata) line = pdata->line; else line = pdev->id; /* Use line number from device tree alias if present */ if (pdev->dev.of_node) { dev_dbg(&pdev->dev, "device tree enabled\n"); ret = of_alias_get_id(pdev->dev.of_node, "serial"); if (ret >= 0) line = ret; pdata = msm_hsl_dt_to_pdata(pdev); if (IS_ERR(pdata)) return PTR_ERR(pdata); pdev->dev.platform_data = pdata; } if (unlikely(line < 0 || line >= UART_NR)) return -ENXIO; pr_info("detected port #%d (ttyHSL%d)\n", pdev->id, line); port = get_port_from_line(line); port->dev = &pdev->dev; port->uartclk = 7372800; msm_hsl_port = UART_TO_MSM(port); msm_hsl_port->clk = clk_get(&pdev->dev, "core_clk"); if (unlikely(IS_ERR(msm_hsl_port->clk))) { ret = PTR_ERR(msm_hsl_port->clk); if (ret != -EPROBE_DEFER) pr_err("Error getting clk\n"); return ret; } /* Interface clock is not required by all UART configurations. * GSBI UART and BLSP UART needs interface clock but Legacy UART * do not require interface clock. Hence, do not fail probe with * iface clk_get failure. */ msm_hsl_port->pclk = clk_get(&pdev->dev, "iface_clk"); if (unlikely(IS_ERR(msm_hsl_port->pclk))) { ret = PTR_ERR(msm_hsl_port->pclk); if (ret == -EPROBE_DEFER) { clk_put(msm_hsl_port->clk); return ret; } else { msm_hsl_port->pclk = NULL; } } /* Identify UART functional mode as 2-wire or 4-wire. */ if (pdata && pdata->config_gpio == 4) msm_hsl_port->func_mode = UART_FOUR_WIRE; else msm_hsl_port->func_mode = UART_TWO_WIRE; match = of_match_device(msm_hsl_match_table, &pdev->dev); if (!match) { msm_hsl_port->ver_id = UARTDM_VERSION_11_13; } else { msm_hsl_port->ver_id = (unsigned int)match->data; /* * BLSP based UART configuration is available with * UARTDM v14 Revision. Hence set uart_type as UART_BLSP. */ msm_hsl_port->uart_type = BLSP_HSUART; msm_hsl_port->bus_scale_table = msm_bus_cl_get_pdata(pdev); if (!msm_hsl_port->bus_scale_table) { pr_err("Bus scaling is disabled\n"); } else { msm_hsl_port->bus_perf_client = msm_bus_scale_register_client( msm_hsl_port->bus_scale_table); if (IS_ERR(&msm_hsl_port->bus_perf_client)) { pr_err("Bus client register failed.\n"); ret = -EINVAL; goto err; } } } gsbi_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gsbi_resource"); if (!gsbi_resource) gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (gsbi_resource) msm_hsl_port->uart_type = GSBI_HSUART; else msm_hsl_port->uart_type = LEGACY_HSUART; uart_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uartdm_resource"); if (!uart_resource) uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (unlikely(!uart_resource)) { pr_err("getting uartdm_resource failed\n"); return -ENXIO; } port->mapbase = uart_resource->start; port->irq = platform_get_irq(pdev, 0); if (unlikely((int)port->irq < 0)) { pr_err("getting irq failed\n"); return -ENXIO; } device_set_wakeup_capable(&pdev->dev, 1); platform_set_drvdata(pdev, port); pm_runtime_enable(port->dev); #ifdef CONFIG_SERIAL_MSM_HSL_CONSOLE ret = device_create_file(&pdev->dev, &dev_attr_console); if (unlikely(ret)) pr_err("Can't create console attribute\n"); #endif msm_hsl_debugfs_init(msm_hsl_port, get_line(pdev)); mutex_init(&msm_hsl_port->clk_mutex); if (pdata && pdata->use_pm) wake_lock_init(&msm_hsl_port->port_open_wake_lock, WAKE_LOCK_SUSPEND, "msm_serial_hslite_port_open"); /* Temporarily increase the refcount on the GSBI clock to avoid a race * condition with the earlyprintk handover mechanism. */ if (msm_hsl_port->pclk) clk_prepare_enable(msm_hsl_port->pclk); ret = uart_add_one_port(&msm_hsl_uart_driver, port); if (msm_hsl_port->pclk) clk_disable_unprepare(msm_hsl_port->pclk); err: return ret; } static int __devexit msm_serial_hsl_remove(struct platform_device *pdev) { struct msm_hsl_port *msm_hsl_port = platform_get_drvdata(pdev); const struct msm_serial_hslite_platform_data *pdata = pdev->dev.platform_data; struct uart_port *port; port = get_port_from_line(get_line(pdev)); #ifdef CONFIG_SERIAL_MSM_HSL_CONSOLE device_remove_file(&pdev->dev, &dev_attr_console); #endif pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); if (pdata && pdata->use_pm) wake_lock_destroy(&msm_hsl_port->port_open_wake_lock); device_set_wakeup_capable(&pdev->dev, 0); platform_set_drvdata(pdev, NULL); mutex_destroy(&msm_hsl_port->clk_mutex); uart_remove_one_port(&msm_hsl_uart_driver, port); clk_put(msm_hsl_port->pclk); clk_put(msm_hsl_port->clk); debugfs_remove(msm_hsl_port->loopback_dir); return 0; } #ifdef CONFIG_PM static int msm_serial_hsl_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct uart_port *port; port = get_port_from_line(get_line(pdev)); if (port) { if (is_console(port)) msm_hsl_deinit_clock(port); uart_suspend_port(&msm_hsl_uart_driver, port); if (device_may_wakeup(dev)) enable_irq_wake(port->irq); } return 0; } static int msm_serial_hsl_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct uart_port *port; port = get_port_from_line(get_line(pdev)); if (port) { uart_resume_port(&msm_hsl_uart_driver, port); if (device_may_wakeup(dev)) disable_irq_wake(port->irq); if (is_console(port)) msm_hsl_init_clock(port); } return 0; } #else #define msm_serial_hsl_suspend NULL #define msm_serial_hsl_resume NULL #endif static int msm_hsl_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct uart_port *port; port = get_port_from_line(get_line(pdev)); dev_dbg(dev, "pm_runtime: suspending\n"); msm_hsl_deinit_clock(port); return 0; } static int msm_hsl_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct uart_port *port; port = get_port_from_line(get_line(pdev)); dev_dbg(dev, "pm_runtime: resuming\n"); msm_hsl_init_clock(port); return 0; } static struct dev_pm_ops msm_hsl_dev_pm_ops = { .suspend = msm_serial_hsl_suspend, .resume = msm_serial_hsl_resume, .runtime_suspend = msm_hsl_runtime_suspend, .runtime_resume = msm_hsl_runtime_resume, }; static struct platform_driver msm_hsl_platform_driver = { .probe = msm_serial_hsl_probe, .remove = __devexit_p(msm_serial_hsl_remove), .driver = { .name = "msm_serial_hsl", .owner = THIS_MODULE, .pm = &msm_hsl_dev_pm_ops, .of_match_table = msm_hsl_match_table, }, }; static int __init msm_serial_hsl_init(void) { int ret; ret = uart_register_driver(&msm_hsl_uart_driver); if (unlikely(ret)) return ret; debug_base = debugfs_create_dir("msm_serial_hsl", NULL); if (IS_ERR_OR_NULL(debug_base)) pr_err("Cannot create debugfs dir\n"); ret = platform_driver_register(&msm_hsl_platform_driver); if (unlikely(ret)) uart_unregister_driver(&msm_hsl_uart_driver); pr_info("driver initialized\n"); return ret; } static void __exit msm_serial_hsl_exit(void) { debugfs_remove_recursive(debug_base); #ifdef CONFIG_SERIAL_MSM_HSL_CONSOLE unregister_console(&msm_hsl_console); #endif platform_driver_unregister(&msm_hsl_platform_driver); uart_unregister_driver(&msm_hsl_uart_driver); } module_init(msm_serial_hsl_init); module_exit(msm_serial_hsl_exit); MODULE_DESCRIPTION("Driver for msm HSUART serial device"); MODULE_LICENSE("GPL v2");