/* Copyright (c) 2013, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; /include/ "msm8610.dtsi" /include/ "dsi-v2-panel-truly-wvga-video.dtsi" /include/ "msm8610-camera-sensor-cdp-mtp.dtsi" / { model = "Qualcomm MSM 8610 CDP"; compatible = "qcom,msm8610-cdp", "qcom,msm8610", "qcom,cdp"; qcom,msm-id = <147 1 0>, <165 1 0>, <161 1 0>, <162 1 0>, <163 1 0>, <164 1 0>, <166 1 0>; }; &soc { serial@f991e000 { status = "ok"; }; i2c@f9923000{ atmel_mxt_ts@4a { compatible = "atmel,mxt-ts"; reg = <0x4a>; interrupt-parent = <&msmgpio>; interrupts = <1 0x2>; vdd_ana-supply = <&pm8110_l19>; vcc_i2c-supply = <&pm8110_l14>; atmel,reset-gpio = <&msmgpio 0 0x00>; atmel,irq-gpio = <&msmgpio 1 0x00>; atmel,panel-coords = <0 0 508 880>; atmel,display-coords = <0 0 480 800>; atmel,i2c-pull-up; atmel,no-force-update; atmel,cfg_1 { atmel,family-id = <0x81>; atmel,variant-id = <0x15>; atmel,version = <0x11>; atmel,build = <0xaa>; atmel,config = [ /* Object 6, Instance = 0 */ 00 00 00 00 00 00 /* Object 38, Instance = 0 */ 1D 01 00 0C 04 0D 00 00 /* Object 7, Instance = 0 */ 20 08 32 /* Object 8, Instance = 0 */ 19 00 14 14 FF 00 FF 00 00 00 /* Object 9, Instance = 0 */ 83 00 00 13 0B 00 20 32 01 03 00 32 05 30 0A 05 0A 00 70 03 FC 01 00 36 2F 2C 00 00 40 00 00 0A 00 00 02 /* Object 18, Instance = 0 */ 00 00 /* Object 19, Instance = 0 */ 00 00 00 00 00 00 /* Object 25, Instance = 0 */ 03 00 18 79 A8 61 /* Object 58, Instance = 0 */ 00 00 00 00 00 00 00 00 00 00 00 /* Object 42, Instance = 0 */ 00 00 00 00 00 00 00 00 /* Object 46, Instance = 0 */ 04 03 08 10 00 00 00 00 00 /* Object 47, Instance = 0 */ 00 00 00 00 00 00 00 00 00 00 /* Object 48, Instance = 0 */ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 /* Object 55, Instance = 0 */ 00 00 00 00 ]; }; }; }; gen-vkeys { compatible = "qcom,gen-vkeys"; label = "atmel_mxt_ts"; qcom,disp-maxx = <480>; qcom,disp-maxy = <800>; qcom,panel-maxx = <508>; qcom,panel-maxy = <880>; qcom,key-codes = <158 102 139>; qcom,y-offset = <35>; }; gpio_keys { compatible = "gpio-keys"; input-name = "gpio-keys"; camera_snapshot { label = "camera_snapshot"; gpios = <&msmgpio 73 0x1>; linux,input-type = <1>; linux,code = <0x2fe>; gpio-key,wakeup; debounce-interval = <15>; }; camera_focus { label = "camera_focus"; gpios = <&msmgpio 74 0x1>; linux,input-type = <1>; linux,code = <0x210>; gpio-key,wakeup; debounce-interval = <15>; }; vol_up { label = "volume_up"; gpios = <&msmgpio 72 0x1>; linux,input-type = <1>; linux,code = <115>; gpio-key,wakeup; debounce-interval = <15>; }; }; sound { qcom,audio-routing = "RX_BIAS", "MCLK", "INT_LDO_H", "MCLK", "MIC BIAS External", "Handset Mic", "MIC BIAS Internal2", "Headset Mic", "AMIC1", "MIC BIAS External", "AMIC2", "MIC BIAS Internal2"; }; }; &i2c_cdc { msm8x10_wcd_codec@0d{ compatible = "qcom,msm8x10-wcd-i2c"; reg = <0x0d>; cdc-vdda-cp-supply = <&pm8110_s4>; qcom,cdc-vdda-cp-voltage = <2150000 2150000>; qcom,cdc-vdda-cp-current = <650000>; cdc-vdda-h-supply = <&pm8110_l6>; qcom,cdc-vdda-h-voltage = <1800000 1800000>; qcom,cdc-vdda-h-current = <250000>; cdc-vdd-px-supply = <&pm8110_l6>; qcom,cdc-vdd-px-voltage = <1800000 1800000>; qcom,cdc-vdd-px-current = <10000>; cdc-vdd-1p2v-supply = <&pm8110_l4>; qcom,cdc-vdd-1p2v-voltage = <1200000 1200000>; qcom,cdc-vdd-1p2v-current = <5000>; cdc-vdd-mic-bias-supply = <&pm8110_l20>; qcom,cdc-vdd-mic-bias-voltage = <3075000 3075000>; qcom,cdc-vdd-mic-bias-current = <25000>; qcom,cdc-micbias-cfilt-sel = <0x0>; qcom,cdc-micbias-cfilt-mv = <1800000>; qcom,cdc-mclk-clk-rate = <12288000>; }; msm8x10_wcd_codec@77{ compatible = "qcom,msm8x10-wcd-i2c"; reg = <0x77>; }; msm8x10_wcd_codec@66{ compatible = "qcom,msm8x10-wcd-i2c"; reg = <0x66>; }; msm8x10_wcd_codec@55{ compatible = "qcom,msm8x10-wcd-i2c"; reg = <0x55>; }; }; &spmi_bus { qcom,pm8110@0 { qcom,leds@a100 { status = "okay"; qcom,led_mpp_2 { label = "mpp"; linux,name = "button-backlight"; linux-default-trigger = "hr-trigger"; qcom,default-state = "off"; qcom,max-current = <40>; qcom,id = <6>; qcom,source-sel = <1>; qcom,mode-ctrl = <0x60>; qcom,mode = "manual"; }; }; qcom,leds@a200 { status = "okay"; qcom,led_mpp_3 { label = "mpp"; linux,name = "wled-backlight"; linux,default-trigger = "bkl-trigger"; qcom,default-state = "on"; qcom,max-current = <40>; qcom,id = <6>; qcom,source-sel = <1>; qcom,mode-ctrl = <0x10>; qcom,mode = "manual"; }; }; }; }; &spmi_bus { qcom,pm8110@1 { qcom,vibrator@c000 { status = "okay"; qcom,vib-timeout-ms = <15000>; qcom,vib-vtg-level-mV = <3100>; }; }; }; &sdhc_1 { vdd-supply = <&pm8110_l17>; qcom,vdd-always-on; qcom,vdd-lpm-sup; qcom,vdd-voltage-level = <2900000 2900000>; qcom,vdd-current-level = <200 400000>; vdd-io-supply = <&pm8110_l6>; qcom,vdd-io-always-on; qcom,vdd-io-lpm-sup; qcom,vdd-io-voltage-level = <1800000 1800000>; qcom,vdd-io-current-level = <200 60000>; qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>; qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; qcom,nonremovable; status = "ok"; }; &sdhc_2 { vdd-supply = <&pm8110_l18>; qcom,vdd-voltage-level = <2950000 2950000>; qcom,vdd-current-level = <15000 400000>; vdd-io-supply = <&pm8110_l21>; qcom,vdd-io-voltage-level = <1800000 2950000>; qcom,vdd-io-current-level = <200 50000>; qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>; #address-cells = <0>; interrupt-parent = <&sdhc_2>; interrupts = <0 1 2>; #interrupt-cells = <1>; interrupt-map-mask = <0xffffffff>; interrupt-map = <0 &intc 0 125 0 1 &intc 0 221 0 2 &msmgpio 42 0x3>; interrupt-names = "hc_irq", "pwr_irq", "status_irq"; cd-gpios = <&msmgpio 42 0x1>; status = "ok"; }; &pm8110_chg { status = "ok"; qcom,charging-disabled; qcom,use-default-batt-values; qcom,chgr@1000 { status = "ok"; }; qcom,buck@1100 { status = "ok"; }; qcom,usb-chgpth@1300 { status = "ok"; }; qcom,chg-misc@1600 { status = "ok"; }; }; &pm8110_gpios { gpio@c000 { /* GPIO 1 */ }; gpio@c100 { /* GPIO 2 */ }; gpio@c200 { /* GPIO 3 */ }; gpio@c300 { /* GPIO 4 */ }; }; &pm8110_mpps { mpp@a000 { /* MPP 1 */ }; mpp@a100 { /* MPP 2 */ status = "disabled"; }; mpp@a200 { /* MPP 3 */ status = "disabled"; }; mpp@a300 { /* MPP 4 */ /* PA_THERM config */ qcom,mode = <4>; /* AIN input */ qcom,invert = <1>; /* Enable MPP */ qcom,ain-route = <3>; /* AMUX 8 */ qcom,master-en = <1>; qcom,src-sel = <0>; /* Function constant */ }; }; /* CoreSight */ &tpiu { qcom,seta-gpios = <&msmgpio 4 0>, <&msmgpio 5 0>, <&msmgpio 6 0>, <&msmgpio 7 0>, <&msmgpio 22 0>, <&msmgpio 23 0>, <&msmgpio 24 0>, <&msmgpio 25 0>, <&msmgpio 26 0>, <&msmgpio 27 0>, <&msmgpio 28 0>, <&msmgpio 29 0>, <&msmgpio 30 0>, <&msmgpio 31 0>, <&msmgpio 94 0>, <&msmgpio 95 0>, <&msmgpio 96 0>, <&msmgpio 97 0>; qcom,seta-gpios-func = <9 9 8 11 2 2 2 2 2 2 3 2 3 3 4 4 4 4>; qcom,seta-gpios-drv = <7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7>; qcom,seta-gpios-pull = <0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0>; qcom,seta-gpios-dir = <2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2>; qcom,setb-gpios = <&msmgpio 8 0>, <&msmgpio 10 0>, <&msmgpio 11 0>, <&msmgpio 13 0>, <&msmgpio 14 0>, <&msmgpio 15 0>, <&msmgpio 16 0>, <&msmgpio 17 0>, <&msmgpio 18 0>, <&msmgpio 19 0>, <&msmgpio 20 0>, <&msmgpio 21 0>, <&msmgpio 42 0>, <&msmgpio 80 0>, <&msmgpio 81 0>, <&msmgpio 82 0>, <&msmgpio 83 0>, <&msmgpio 84 0>; qcom,setb-gpios-func = <10 8 8 6 9 9 9 9 9 9 9 9 5 7 7 8 8 8>; qcom,setb-gpios-drv = <7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7>; qcom,setb-gpios-pull = <0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0>; qcom,setb-gpios-dir = <2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2>; };