/* Copyright 2007, Google Inc. */ #include #include #include #include #define MDDI_CLIENT_CORE_BASE 0x108000 #define LCD_CONTROL_BLOCK_BASE 0x110000 #define SPI_BLOCK_BASE 0x120000 #define I2C_BLOCK_BASE 0x130000 #define PWM_BLOCK_BASE 0x140000 #define GPIO_BLOCK_BASE 0x150000 #define SYSTEM_BLOCK1_BASE 0x160000 #define SYSTEM_BLOCK2_BASE 0x170000 #define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00) #define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04) #define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08) #define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C) #define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10) #define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14) #define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18) #define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C) #define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20) #define DPSUS (MDDI_CLIENT_CORE_BASE|0x24) #define DPRUN (MDDI_CLIENT_CORE_BASE|0x28) #define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C) #define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30) #define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34) #define INTMONI (MDDI_CLIENT_CORE_BASE|0x38) #define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C) #define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40) #define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44) #define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48) #define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C) #define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50) #define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54) #define SRST (LCD_CONTROL_BLOCK_BASE|0x00) #define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04) #define START (LCD_CONTROL_BLOCK_BASE|0x08) #define PORT (LCD_CONTROL_BLOCK_BASE|0x0C) #define CMN (LCD_CONTROL_BLOCK_BASE|0x10) #define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14) #define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18) #define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C) #define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20) #define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24) #define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28) #define PXL (LCD_CONTROL_BLOCK_BASE|0x30) #define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34) #define HSW (LCD_CONTROL_BLOCK_BASE|0x38) #define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C) #define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40) #define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44) #define VSW (LCD_CONTROL_BLOCK_BASE|0x48) #define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C) #define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50) #define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54) #define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58) #define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C) #define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60) #define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64) #define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68) #define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C) #define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70) #define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74) #define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78) #define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C) #define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80) #define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84) #define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88) #define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C) #define MONI (LCD_CONTROL_BLOCK_BASE|0xB0) #define Current (LCD_CONTROL_BLOCK_BASE|0xC0) #define LCD (LCD_CONTROL_BLOCK_BASE|0xC4) #define COMMAND (LCD_CONTROL_BLOCK_BASE|0xC8) #define SSICTL (SPI_BLOCK_BASE|0x00) #define SSITIME (SPI_BLOCK_BASE|0x04) #define SSITX (SPI_BLOCK_BASE|0x08) #define SSIRX (SPI_BLOCK_BASE|0x0C) #define SSIINTC (SPI_BLOCK_BASE|0x10) #define SSIINTS (SPI_BLOCK_BASE|0x14) #define SSIDBG1 (SPI_BLOCK_BASE|0x18) #define SSIDBG2 (SPI_BLOCK_BASE|0x1C) #define SSIID (SPI_BLOCK_BASE|0x20) #define I2CSETUP (I2C_BLOCK_BASE|0x00) #define I2CCTRL (I2C_BLOCK_BASE|0x04) #define TIMER0LOAD (PWM_BLOCK_BASE|0x00) #define TIMER0VALUE (PWM_BLOCK_BASE|0x04) #define TIMER0CONTROL (PWM_BLOCK_BASE|0x08) #define TIMER0INTCLR (PWM_BLOCK_BASE|0x0C) #define TIMER0RIS (PWM_BLOCK_BASE|0x10) #define TIMER0MIS (PWM_BLOCK_BASE|0x14) #define TIMER0BGLOAD (PWM_BLOCK_BASE|0x18) #define PWM0OFF (PWM_BLOCK_BASE|0x1C) #define TIMER1LOAD (PWM_BLOCK_BASE|0x20) #define TIMER1VALUE (PWM_BLOCK_BASE|0x24) #define TIMER1CONTROL (PWM_BLOCK_BASE|0x28) #define TIMER1INTCLR (PWM_BLOCK_BASE|0x2C) #define TIMER1RIS (PWM_BLOCK_BASE|0x30) #define TIMER1MIS (PWM_BLOCK_BASE|0x34) #define TIMER1BGLOAD (PWM_BLOCK_BASE|0x38) #define PWM1OFF (PWM_BLOCK_BASE|0x3C) #define TIMERITCR (PWM_BLOCK_BASE|0x60) #define TIMERITOP (PWM_BLOCK_BASE|0x64) #define PWMCR (PWM_BLOCK_BASE|0x68) #define PWMID (PWM_BLOCK_BASE|0x6C) #define PWMMON (PWM_BLOCK_BASE|0x70) #define GPIODATA (GPIO_BLOCK_BASE|0x00) #define GPIODIR (GPIO_BLOCK_BASE|0x04) #define GPIOIS (GPIO_BLOCK_BASE|0x08) #define GPIOIBE (GPIO_BLOCK_BASE|0x0C) #define GPIOIEV (GPIO_BLOCK_BASE|0x10) #define GPIOIE (GPIO_BLOCK_BASE|0x14) #define GPIORIS (GPIO_BLOCK_BASE|0x18) #define GPIOMIS (GPIO_BLOCK_BASE|0x1C) #define GPIOIC (GPIO_BLOCK_BASE|0x20) #define GPIOOMS (GPIO_BLOCK_BASE|0x24) #define GPIOPC (GPIO_BLOCK_BASE|0x28) #define GPIOID (GPIO_BLOCK_BASE|0x30) #define WKREQ (SYSTEM_BLOCK1_BASE|0x00) #define CLKENB (SYSTEM_BLOCK1_BASE|0x04) #define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08) #define CNT_DIS (SYSTEM_BLOCK1_BASE|0x10) #define INTMASK (SYSTEM_BLOCK1_BASE|0x0C) #define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00) struct init_table { unsigned int reg; unsigned int val; }; static struct init_table toshiba_480x800_init_table[] = { { DPSET0, 0x4BEC0066 }, // # MDC.DPSET0 # Setup DPLL parameters { DPSET1, 0x00000113 }, // # MDC.DPSET1 { DPSUS, 0x00000000 }, // # MDC.DPSUS # Set DPLL oscillation enable { DPRUN, 0x00000001 }, // # MDC.DPRUN # Release reset signal for DPLL { 0, 15 }, // wait_ms(15); { SYSCKENA, 0x00000001 }, // # MDC.SYSCKENA # Enable system clock output { CLKENB, 0x000000E9 }, // # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK) { GPIO_BLOCK_BASE, 0x03FF0000 }, // # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 { GPIODIR, 0x0000024D }, // # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output) { SYSTEM_BLOCK2_BASE, 0x00000173 }, // # SYS.GPIOSEL # GPIO port multiplexing control { GPIOPC, 0x03C300C0 }, // # GPI .GPIOPC # GPIO2,3 PD cut { SYSTEM_BLOCK1_BASE, 0x00000000 }, // # SYS.WKREQ # Wake-up request event is VSYNC alignment { GPIOIS, 0x00000000 }, // # GPI .GPIOIS # Set interrupt sense of GPIO { GPIOIEV, 0x00000001 }, // # GPI .GPIOIEV # Set interrupt event of GPIO { GPIOIC, 0x000003FF }, // # GPI .GPIOIC # GPIO interrupt clear { GPIO_BLOCK_BASE, 0x00040004 }, // # GPI .GPIODATA # Release LCDD reset { GPIO_BLOCK_BASE, 0x00080008 }, // # GPI .GPIODATA # eDRAM VD supply { DRAMPWR, 0x00000001 }, // # SYS.DRAMPWR # eDRAM power up { CLKENB, 0x0000A0EB }, // # enable eDRAM clock { PWMCR, 0x00000000 }, // # PWM.PWMCR # PWM output enable { 0, 1 }, // wait_ms(1); { SPI_BLOCK_BASE, 0x00060399}, // # SPI .SSICTL # SPI operation mode setting { SSITIME, 0x00000100 }, // # SPI .SSITIME # SPI serial interface timing setting { CNT_DIS, 0x00000100 }, // # SPI .SSITIME # SPI serial interface timing setting { SPI_BLOCK_BASE, 0x0006039B }, // # SPI .SSICTL # Set SPI active mode { SSITX, 0x00000000 }, // # SPI.SSITX # Release from Deep Stanby mode { 0, 2 }, // wait_ms(2); { SSITX, 0x00000000 }, // # SPI.SSITX { 0, 2 }, // wait_ms(2); { SSITX, 0x00000000 }, // # SPI.SSITX { 0, 2 }, // wait_ms(2); { SSITX, 0x000800BA }, // # SPI.SSITX *NOTE 1 # Command setting of SPI block { SSITX, 0x00000111 }, // # Display mode setup(1) : Normaly Black { SSITX, 0x00080036 }, // # Command setting of SPI block { SSITX, 0x00000100 }, // # Memory access control { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x0008003A }, // # Command setting of SPI block { SSITX, 0x00000160 }, // # Display mode setup(2) { SSITX, 0x000800B1 }, // # Command setting of SPI block { SSITX, 0x0000015D }, // # RGB Interface data format { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800B2 }, // # Command setting of SPI block { SSITX, 0x00000133 }, // # Drivnig method { SSITX, 0x000800B3 }, // # Command setting of SPI block { SSITX, 0x00000122 }, // # Booster operation setup { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800B4 }, // # Command setting of SPI block { SSITX, 0x00000102 }, // # OP-amp capability/System clock freq. division setup { SSITX, 0x000800B5 }, // # Command setting of SPI block { SSITX, 0x0000011E }, // # VCS Voltage adjustment (1C->1F for Rev 2) { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800B6 }, // # Command setting of SPI block { SSITX, 0x00000127 }, // # VCOM Voltage adjustment { SSITX, 0x000800B7 }, // # Command setting of SPI block { SSITX, 0x00000103 }, // # Configure an external display signal { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800B9 }, // # Command setting of SPI block { SSITX, 0x00000124 }, // # DCCK/DCEV timing setup { SSITX, 0x000800BD }, // # Command setting of SPI block { SSITX, 0x000001A1 }, // # ASW signal control { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800BB }, // # Command setting of SPI block { SSITX, 0x00000100 }, // # Dummy display (white/black) count setup for QUAD Data operation { SSITX, 0x000800BF }, // # Command setting of SPI block { SSITX, 0x00000101 }, // # Dummy display (white/black) count setup for QUAD Data operation { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800BE }, // # Command setting of SPI block { SSITX, 0x00000100 }, // # wait_ms(-out FR count setup (A) { SSITX, 0x000800C0 }, // # Command setting of SPI block { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (A) { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C1 }, // # Command setting of SPI block { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (B) { SSITX, 0x000800C2 }, // # Command setting of SPI block { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (C) { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C3 }, // # Command setting of SPI block { SSITX, 0x00080132 }, // # wait_ms(-in line clock count setup (D) { SSITX, 0x00000132 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C4 }, // # Command setting of SPI block { SSITX, 0x00080132 }, // # Seep-in line clock count setup (E) { SSITX, 0x00000132 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C5 }, // # Command setting of SPI block { SSITX, 0x00080132 }, // # wait_ms(-in line clock count setup (F) { SSITX, 0x00000132 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C6 }, // # Command setting of SPI block { SSITX, 0x00080132 }, // # wait_ms(-in line clock setup (G) { SSITX, 0x00000132 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C7 }, // # Command setting of SPI block { SSITX, 0x00080164 }, // # Gamma 1 fine tuning (1) { SSITX, 0x00000145 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C8 }, // # Command setting of SPI block { SSITX, 0x00000144 }, // # Gamma 1 fine tuning (2) { SSITX, 0x000800C9 }, // # Command setting of SPI block { SSITX, 0x00000152 }, // # Gamma 1 inclination adjustment { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800CA }, // # Command setting of SPI block { SSITX, 0x00000100 }, // # Gamma 1 blue offset adjustment { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800EC }, // # Command setting of SPI block { SSITX, 0x00080101 }, // # Total number of horizontal clock cycles (1) [PCLK Sync. VGA setting] { SSITX, 0x000001FC }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800CF }, // # Command setting of SPI block { SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table1 for VGA] { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D0 }, // # Command setting of SPI block { SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table1 for VGA] { SSITX, 0x00000104 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D1 }, // # Command setting of SPI block { SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table1 for VGA] { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D2 }, // # Command setting of SPI block { SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table1 for VGA] { SSITX, 0x00000128 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D3 }, // # Command setting of SPI block { SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table1 for VGA] { SSITX, 0x00000128 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D4 }, // # Command setting of SPI block { SSITX, 0x00080126 }, // # ASW timing control (1) [PCLK Sync. Table1 for VGA] { SSITX, 0x000001A4 }, // { 0, 1 }, // wait_ms(1); // # Wait SPI fifo empty { SSITX, 0x000800D5 }, // # Command setting of SPI block { SSITX, 0x00000120 }, // # ASW timing control (2) [PCLK Sync. Table1 for VGA] { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800EF }, // # Command setting of SPI block { SSITX, 0x00080132 }, // # Total number of horizontal clock cycles (2) [PCLK Sync. Table1 for QVGA ] { SSITX, 0x00000100 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { BITMAP0, 0x032001E0 }, // MDC.BITMAP0 ); // Setup of PITCH size to Frame buffer1 { BITMAP1, 0x032001E0 }, // MDC.BITMAP1 ); // Setup of PITCH size to Frame buffer1 { BITMAP2, 0x014000F0 }, // MDC.BITMAP3 ); // Setup of PITCH size to Frame buffer2 { BITMAP3, 0x014000F0 }, // MDC.BITMAP4 ); // Setup of PITCH size to Frame buffer3 { BITMAP4, 0x014000F0 }, // MDC.BITMAP5 ); // Setup of PITCH size to Frame buffer4 { CLKENB, 0x0000A1EB }, // SYS.CLKENB ); // DCLK supply { PORT_ENB, 0x00000001 }, // LCD.PORT_ENB ); // Synchronous port enable { PORT, 0x00000004 }, // LCD.PORT ); // Polarity of DE is set to high active { PXL, 0x00000002 }, // LCD.PXL ); // ACTMODE 2 set (1st frame black data output) { MPLFBUF, 0x00000000 }, // LCD.MPLFBUF ); // Select the reading buffer { HCYCLE, 0x000000FD }, // LCD.HCYCLE ); // Setup to VGA size { HSW, 0x00000003 }, // LCD.HSW { HDE_START, 0x00000007 }, // LCD.HDE_START { HDE_SIZE, 0x000000EF }, // LCD.HDE_SIZE { VCYCLE, 0x00000325 }, // LCD.VCYCLE { VSW, 0x00000001 }, // LCD.VSW { VDE_START, 0x00000003 }, // LCD.VDE_START { VDE_SIZE, 0x0000031F }, // LCD.VDE_SIZE { START, 0x00000001 }, // LCD.START ); // LCDC - Pixel data transfer start { 0, 10 }, // wait_ms( 10 ); { SSITX, 0x000800BC }, // SPI.SSITX ); // Command setting of SPI block { SSITX, 0x00000180 }, // Display data setup { SSITX, 0x0008003B }, // Command setting of SPI block { SSITX, 0x00000100 }, // Quad Data configuration - VGA { 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty { SSITX, 0x000800B0 }, // Command setting of SPI block { SSITX, 0x00000116 }, // Power supply ON/OFF control { 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty { SSITX, 0x000800B8 }, // Command setting of SPI block { SSITX, 0x000801FF }, // Output control { SSITX, 0x000001F5 }, { 0, 1 }, // wait_ms( 1); // Wait SPI fifo empty { SSITX, 0x00000011 }, // wait_ms(-out (Command only) { SSITX, 0x00000029 }, // Display on (Command only) //{ SYSTEM_BLOCK1_BASE, 0x00000002 }, // # wakeREQ -> GPIO { 0, 0 } }; static struct init_table toshiba_480x640_init_table[] = { { DPSET0, 0x4BEC0066 }, // # MDC.DPSET0 # Setup DPLL parameters { DPSET1, 0x00000113 }, // # MDC.DPSET1 { DPSUS, 0x00000000 }, // # MDC.DPSUS # Set DPLL oscillation enable { DPRUN, 0x00000001 }, // # MDC.DPRUN # Release reset signal for DPLL { 0, 14 }, // wait_ms(14); { SYSCKENA, 0x00000001 }, // # MDC.SYSCKENA # Enable system clock output { CLKENB, 0x000000EF }, // # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK) { GPIO_BLOCK_BASE, 0x03FF0000 }, // # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 { GPIODIR, 0x0000024D }, // # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output) { SYSTEM_BLOCK2_BASE, 0x00000173 }, // # SYS.GPIOSEL # GPIO port multiplexing control { GPIOPC, 0x03C300C0 }, // # GPI .GPIOPC # GPIO2,3 PD cut { SYSTEM_BLOCK1_BASE, 0x00000000 }, // # SYS.WKREQ # Wake-up request event is VSYNC alignment { GPIOIS, 0x00000000 }, // # GPI .GPIOIS # Set interrupt sense of GPIO { GPIOIEV, 0x00000001 }, // # GPI .GPIOIEV # Set interrupt event of GPIO { GPIOIC, 0x000003FF }, // # GPI .GPIOIC # GPIO interrupt clear { GPIO_BLOCK_BASE, 0x00060006 }, // # GPI .GPIODATA # Release LCDD reset { GPIO_BLOCK_BASE, 0x00080008 }, // # GPI .GPIODATA # eDRAM VD supply { GPIO_BLOCK_BASE, 0x02000200 }, // # GPI .GPIODATA # TEST LED ON { DRAMPWR, 0x00000001 }, // # SYS.DRAMPWR # eDRAM power up { TIMER0CONTROL, 0x00000060 }, // # PWM.Timer0Control # PWM0 output stop { PWM_BLOCK_BASE, 0x00001388 }, // # PWM.Timer0Load # PWM0 10kHz , Duty 99 (BackLight OFF) //{PWM0OFF, 0x00000001 }, // # PWM.PWM0OFF #if 0 { PWM0OFF, 0x00001387 }, // SURF 100% backlight { PWM0OFF, 0x00000000 }, // FFA 100% backlight #endif { PWM0OFF, 0x000009C3 }, // 50% BL { TIMER1CONTROL, 0x00000060 }, // # PWM.Timer1Control # PWM1 output stop { TIMER1LOAD, 0x00001388 }, // # PWM.Timer1Load # PWM1 10kHz , Duty 99 (BackLight OFF) //{PWM1OFF, 0x00000001 }, // # PWM.PWM1OFF { PWM1OFF, 0x00001387 }, { TIMER0CONTROL, 0x000000E0 }, // # PWM.Timer0Control # PWM0 output start { TIMER1CONTROL, 0x000000E0 }, // # PWM.Timer1Control # PWM1 output start { PWMCR, 0x00000003 }, // # PWM.PWMCR # PWM output enable { 0, 1 }, // wait_ms(1); { SPI_BLOCK_BASE, 0x00000799 }, // # SPI .SSICTL # SPI operation mode setting { SSITIME, 0x00000100 }, // # SPI .SSITIME # SPI serial interface timing setting { SPI_BLOCK_BASE, 0x0000079b }, // # SPI .SSICTL # Set SPI active mode { SSITX, 0x00000000 }, // # SPI.SSITX # Release from Deep Stanby mode { 0, 1 }, // wait_ms(1); { SSITX, 0x00000000 }, // # SPI.SSITX { 0, 1 }, // wait_ms(1); { SSITX, 0x00000000 }, // # SPI.SSITX { 0, 1 }, // wait_ms(1); { SSITX, 0x000800BA }, // # SPI.SSITX *NOTE 1 # Command setting of SPI block { SSITX, 0x00000111 }, // # Display mode setup(1) : Normaly Black { SSITX, 0x00080036 }, // # Command setting of SPI block { SSITX, 0x00000100 }, // # Memory access control { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800BB }, // # Command setting of SPI block { SSITX, 0x00000100 }, // # Display mode setup(2) { SSITX, 0x0008003A }, // # Command setting of SPI block { SSITX, 0x00000160 }, // # RGB Interface data format { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800BF }, // # Command setting of SPI block { SSITX, 0x00000100 }, // # Drivnig method { SSITX, 0x000800B1 }, // # Command setting of SPI block { SSITX, 0x0000015D }, // # Booster operation setup { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800B2 }, // # Command setting of SPI block { SSITX, 0x00000133 }, // # Booster mode setup { SSITX, 0x000800B3 }, // # Command setting of SPI block { SSITX, 0x00000122 }, // # Booster frequencies setup { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800B4 }, // # Command setting of SPI block { SSITX, 0x00000102 }, // # OP-amp capability/System clock freq. division setup { SSITX, 0x000800B5 }, // # Command setting of SPI block { SSITX, 0x0000011F }, // # VCS Voltage adjustment (1C->1F for Rev 2) { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800B6 }, // # Command setting of SPI block { SSITX, 0x00000128 }, // # VCOM Voltage adjustment { SSITX, 0x000800B7 }, // # Command setting of SPI block { SSITX, 0x00000103 }, // # Configure an external display signal { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800B9 }, // # Command setting of SPI block { SSITX, 0x00000120 }, // # DCCK/DCEV timing setup { SSITX, 0x000800BD }, // # Command setting of SPI block { SSITX, 0x00000102 }, // # ASW signal control { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800BE }, // # Command setting of SPI block { SSITX, 0x00000100 }, // # Dummy display (white/black) count setup for QUAD Data operation { SSITX, 0x000800C0 }, // # Command setting of SPI block { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (A) { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C1 }, // # Command setting of SPI block { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (B) { SSITX, 0x000800C2 }, // # Command setting of SPI block { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (C) { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C3 }, // # Command setting of SPI block { SSITX, 0x0008010A }, // # wait_ms(-in line clock count setup (D) { SSITX, 0x0000010A }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C4 }, // # Command setting of SPI block { SSITX, 0x00080160 }, // # Seep-in line clock count setup (E) { SSITX, 0x00000160 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C5 }, // # Command setting of SPI block { SSITX, 0x00080160 }, // # wait_ms(-in line clock count setup (F) { SSITX, 0x00000160 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C6 }, // # Command setting of SPI block { SSITX, 0x00080160 }, // # wait_ms(-in line clock setup (G) { SSITX, 0x00000160 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C7 }, // # Command setting of SPI block { SSITX, 0x00080133 }, // # Gamma 1 fine tuning (1) { SSITX, 0x00000143 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800C8 }, // # Command setting of SPI block { SSITX, 0x00000144 }, // # Gamma 1 fine tuning (2) { SSITX, 0x000800C9 }, // # Command setting of SPI block { SSITX, 0x00000133 }, // # Gamma 1 inclination adjustment { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800CA }, // # Command setting of SPI block { SSITX, 0x00000100 }, // # Gamma 1 blue offset adjustment { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800EC }, // # Command setting of SPI block { SSITX, 0x00080102 }, // # Total number of horizontal clock cycles (1) [PCLK Sync. VGA setting] { SSITX, 0x00000118 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800CF }, // # Command setting of SPI block { SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table1 for VGA] { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D0 }, // # Command setting of SPI block { SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table1 for VGA] { SSITX, 0x00000104 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D1 }, // # Command setting of SPI block { SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table1 for VGA] { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D2 }, // # Command setting of SPI block { SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table1 for VGA] { SSITX, 0x0000013A }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D3 }, // # Command setting of SPI block { SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table1 for VGA] { SSITX, 0x0000013A }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D4 }, // # Command setting of SPI block { SSITX, 0x00080124 }, // # ASW timing control (1) [PCLK Sync. Table1 for VGA] { SSITX, 0x0000016E }, // { 0, 1 }, // wait_ms(1); // # Wait SPI fifo empty { SSITX, 0x000800D5 }, // # Command setting of SPI block { SSITX, 0x00000124 }, // # ASW timing control (2) [PCLK Sync. Table1 for VGA] { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800ED }, // # Command setting of SPI block { SSITX, 0x00080101 }, // # Total number of horizontal clock cycles (2) [PCLK Sync. Table1 for QVGA ] { SSITX, 0x0000010A }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D6 }, // # Command setting of SPI block { SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table2 for QVGA] { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D7 }, // # Command setting of SPI block { SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table2 for QVGA] { SSITX, 0x0000010A }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D8 }, // # Command setting of SPI block { SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table2 for QVGA] { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800D9 }, // # Command setting of SPI block { SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table2 for QVGA] { SSITX, 0x00000114 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800DE }, // # Command setting of SPI block { SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table2 for QVGA] { SSITX, 0x00000114 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800DF }, // # Command setting of SPI block { SSITX, 0x00080112 }, // # ASW timing control (1) [PCLK Sync. Table2 for QVGA] { SSITX, 0x0000013F }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800E0 }, // # Command setting of SPI block { SSITX, 0x0000010B }, // # ASW timing control (2) [PCLK Sync. Table2 for QVGA] { SSITX, 0x000800E2 }, // # Command setting of SPI block { SSITX, 0x00000101 }, // # Built-in oscillator frequency division setup [Frequency division ratio : 2 (60Hq) { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800E3 }, // # Command setting of SPI block { SSITX, 0x00000136 }, // # Built-in oscillator clock count setup { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800E4 }, // # Command setting of SPI block { SSITX, 0x00080100 }, // # CKV timing control for using build-in osc { SSITX, 0x00000103 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800E5 }, // # Command setting of SPI block { SSITX, 0x00080102 }, // # OEV timing control for using build-in osc { SSITX, 0x00000104 }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800E6 }, // # Command setting of SPI block { SSITX, 0x00000103 }, // # DCEV timing control for using build-in osc { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800E7 }, // # Command setting of SPI block { SSITX, 0x00080104 }, // # ASW timing setup for using build-in osc(1) { SSITX, 0x0000010A }, // { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty { SSITX, 0x000800E8 }, // # Command setting of SPI block { SSITX, 0x00000104 }, // # ASW timing setup for using build-in osc(2) { CLKENB, 0x000001EF }, // # SYS.CLKENB # DCLK enable { START, 0x00000000 }, // # LCD.START # LCDC wait_ms( mode { WRSTB, 0x0000003F }, // # LCD.WRSTB # write_client_reg( strobe { RDSTB, 0x00000432 }, // # LCD.RDSTB # Read strobe { PORT_ENB, 0x00000002 }, // # LCD.PORT_ENB # Asynchronous port enable { VSYNIF, 0x00000000 }, // # LCD.VSYNCIF # VSYNC I/F mode set { ASY_DATA, 0x80000000 }, // # LCD.ASY_DATx # Index setting of SUB LCDD { ASY_DATB, 0x00000001 }, // # Oscillator start { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable { 0, 10 }, // wait_ms(10); { ASY_DATA, 0x80000000 }, // # LCD.ASY_DATx # DUMMY write_client_reg(@*NOTE2 { ASY_DATB, 0x80000000 }, // { ASY_DATC, 0x80000000 }, // { ASY_DATD, 0x80000000 }, // { ASY_CMDSET, 0x00000009 }, // # LCD.ASY_CMDSET { ASY_CMDSET, 0x00000008 }, // # LCD.ASY_CMDSET { ASY_DATA, 0x80000007 }, // # LCD.ASY_DATx # Index setting of SUB LCDD { ASY_DATB, 0x00004005 }, // # LCD driver control { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable { 0, 20 }, // wait_ms(20); { ASY_DATA, 0x80000059 }, // # LCD.ASY_DATx # Index setting of SUB LCDD { ASY_DATB, 0x00000000 }, // # LTPS I/F control { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable { VSYNIF, 0x00000001 }, // # LCD.VSYNCIF # VSYNC I/F mode OFF { PORT_ENB, 0x00000001 }, // # LCD.PORT_ENB # SYNC I/F output select /******************************/ { VSYNIF, 0x00000001 }, // VSYNC I/F mode OFF { PORT_ENB, 0x00000001 }, // SYNC I/F mode ON { BITMAP1, 0x01E000F0 }, // MDC.BITMAP2 ); // Setup of PITCH size to Frame buffer1 { BITMAP2, 0x01E000F0 }, // MDC.BITMAP3 ); // Setup of PITCH size to Frame buffer2 { BITMAP3, 0x01E000F0 }, // MDC.BITMAP4 ); // Setup of PITCH size to Frame buffer3 { BITMAP4, 0x00DC00B0 }, // MDC.BITMAP5 ); // Setup of PITCH size to Frame buffer4 { CLKENB, 0x000001EF }, // SYS.CLKENB ); // DCLK supply { PORT_ENB, 0x00000001 }, // LCD.PORT_ENB ); // Synchronous port enable { PORT, 0x00000004 }, // LCD.PORT ); // Polarity of DE is set to high active { PXL, 0x00000002 }, // LCD.PXL ); // ACTMODE 2 set (1st frame black data output) { MPLFBUF, 0x00000000 }, // LCD.MPLFBUF ); // Select the reading buffer { HCYCLE, 0x0000010b }, // LCD.HCYCLE ); // Setup to VGA size { HSW, 0x00000003 }, // LCD.HSW { HDE_START, 0x00000007 }, // LCD.HDE_START { HDE_SIZE, 0x000000EF }, // LCD.HDE_SIZE { VCYCLE, 0x00000285 }, // LCD.VCYCLE { VSW, 0x00000001 }, // LCD.VSW { VDE_START, 0x00000003 }, // LCD.VDE_START { VDE_SIZE, 0x0000027F }, // LCD.VDE_SIZE { START, 0x00000001 }, // LCD.START ); // LCDC - Pixel data transfer start { 0, 10 }, // wait_ms( 10 ); { SSITX, 0x000800BC }, // SPI.SSITX ); // Command setting of SPI block { SSITX, 0x00000180 }, // Display data setup { SSITX, 0x0008003B }, // Command setting of SPI block { SSITX, 0x00000100 }, // Quad Data configuration - VGA { 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty { SSITX, 0x000800B0 }, // Command setting of SPI block { SSITX, 0x00000116 }, // Power supply ON/OFF control { 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty { SSITX, 0x000800B8 }, // Command setting of SPI block { SSITX, 0x000801FF }, // Output control { SSITX, 0x000001F5 }, { 0, 1 }, // wait_ms( 1); // Wait SPI fifo empty { SSITX, 0x00000011 }, // wait_ms(-out (Command only) { SSITX, 0x00000029 }, // Display on (Command only) { SYSTEM_BLOCK1_BASE, 0x00000002 }, // # wakeREQ -> GPIO { 0, 0 } }; static void _panel_init(struct init_table *init_table) { unsigned n; dprintf(INFO, "panel_init()\n"); n = 0; while (init_table[n].reg != 0 || init_table[n].val != 0) { if (init_table[n].reg != 0) mddi_remote_write(init_table[n].val, init_table[n].reg); else mdelay(init_table[n].val); n++; } dprintf(INFO, "panel_init() done\n"); } void panel_init(struct mddi_client_caps *client_caps) { switch(client_caps->manufacturer_name) { case 0xd263: // Toshiba dprintf(INFO, "Found Toshiba panel\n"); _panel_init(toshiba_480x800_init_table); break; case 0x4474: //?? if (client_caps->product_code == 0xc065) dprintf(INFO, "Found WVGA panel\n"); break; } } void panel_poweron(void) { gpio_set(88, 0); gpio_config(88, GPIO_OUTPUT); udelay(10); gpio_set(88, 1); mdelay(10); //mdelay(1000); // uncomment for second stage boot } void panel_backlight(int on) {}