# # USB Gadget support on a system involves # (a) a peripheral controller, and # (b) the gadget driver using it. # # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! # # - Host systems (like PCs) need CONFIG_USB (with "A" jacks). # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). # - Some systems have both kinds of controllers. # # With help from a special transceiver and a "Mini-AB" jack, systems with # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). # menuconfig USB_GADGET tristate "USB Gadget Support" select NLS help USB is a master/slave protocol, organized with one master host (such as a PC) controlling up to 127 peripheral devices. The USB hardware is asymmetric, which makes it easier to set up: you can't connect a "to-the-host" connector to a peripheral. Linux can run in the host, or in the peripheral. In both cases you need a low level bus controller driver, and some software talking to it. Peripheral controllers are often discrete silicon, or are integrated with the CPU in a microcontroller. The more familiar host side controllers have names like "EHCI", "OHCI", or "UHCI", and are usually integrated into southbridges on PC motherboards. Enable this configuration option if you want to run Linux inside a USB peripheral device. Configure one hardware driver for your peripheral/device side bus controller, and a "gadget driver" for your peripheral protocol. (If you use modular gadget drivers, you may configure more than one.) If in doubt, say "N" and don't enable these drivers; most people don't have this kind of hardware (except maybe inside Linux PDAs). For more information, see and the kernel DocBook documentation for this API. if USB_GADGET config USB_GADGET_DEBUG boolean "Debugging messages (DEVELOPMENT)" depends on DEBUG_KERNEL help Many controller and gadget drivers will print some debugging messages if you use this option to ask for those messages. Avoid enabling these messages, even if you're actively debugging such a driver. Many drivers will emit so many messages that the driver timings are affected, which will either create new failure modes or remove the one you're trying to track down. Never enable these messages for a production build. config USB_GADGET_VERBOSE bool "Verbose debugging Messages (DEVELOPMENT)" depends on USB_GADGET_DEBUG help Many controller and gadget drivers will print verbose debugging messages if you use this option to ask for those messages. Avoid enabling these messages, even if you're actively debugging such a driver. Many drivers will emit so many messages that the driver timings are affected, which will either create new failure modes or remove the one you're trying to track down. Never enable these messages for a production build. config USB_GADGET_DEBUG_FILES boolean "Debugging information files (DEVELOPMENT)" depends on PROC_FS help Some of the drivers in the "gadget" framework can expose debugging information in files such as /proc/driver/udc (for a peripheral controller). The information in these files may help when you're troubleshooting or bringing up a driver on a new board. Enable these files by choosing "Y" here. If in doubt, or to conserve kernel memory, say "N". config USB_GADGET_DEBUG_FS boolean "Debugging information files in debugfs (DEVELOPMENT)" depends on DEBUG_FS help Some of the drivers in the "gadget" framework can expose debugging information in files under /sys/kernel/debug/. The information in these files may help when you're troubleshooting or bringing up a driver on a new board. Enable these files by choosing "Y" here. If in doubt, or to conserve kernel memory, say "N". config USB_GADGET_VBUS_DRAW int "Maximum VBUS Power usage (2-500 mA)" range 2 500 default 2 help Some devices need to draw power from USB when they are configured, perhaps to operate circuitry or to recharge batteries. This is in addition to any local power supply, such as an AC adapter or batteries. Enter the maximum power your device draws through USB, in milliAmperes. The permitted range of values is 2 - 500 mA; 0 mA would be legal, but can make some hosts misbehave. This value will be used except for system-specific gadget drivers that have more specific information. config USB_GADGET_STORAGE_NUM_BUFFERS int "Number of storage pipeline buffers" range 2 4 default 2 help Usually 2 buffers are enough to establish a good buffering pipeline. The number may be increased in order to compensate for a bursty VFS behaviour. For instance there may be CPU wake up latencies that makes the VFS to appear bursty in a system with an CPU on-demand governor. Especially if DMA is doing IO to offload the CPU. In this case the CPU will go into power save often and spin up occasionally to move data within VFS. If selecting USB_GADGET_DEBUG_FILES this value may be set by a module parameter as well. If unsure, say 2. source "drivers/usb/gadget/udc/Kconfig" # # USB Gadget Drivers # # composite based drivers config USB_LIBCOMPOSITE tristate select CONFIGFS_FS depends on USB_GADGET config USB_F_ACM tristate config USB_F_SS_LB tristate config USB_U_SERIAL tristate config USB_U_ETHER tristate config USB_F_SERIAL tristate config USB_F_OBEX tristate config USB_F_NCM tristate config USB_F_ECM tristate config USB_F_PHONET tristate config USB_F_EEM tristate config USB_F_SUBSET tristate config USB_F_RNDIS tristate config USB_F_MASS_STORAGE tristate config USB_F_FS tristate config USB_F_UAC1 tristate config USB_F_UAC2 tristate config USB_F_UVC tristate config USB_F_MTP tristate config USB_F_PTP tristate config USB_F_AUDIO_SRC tristate config USB_F_ACC tristate choice tristate "USB Gadget Drivers" default USB_ETH help A Linux "Gadget Driver" talks to the USB Peripheral Controller driver through the abstract "gadget" API. Some other operating systems call these "client" drivers, of which "class drivers" are a subset (implementing a USB device class specification). A gadget driver implements one or more USB functions using the peripheral hardware. Gadget drivers are hardware-neutral, or "platform independent", except that they sometimes must understand quirks or limitations of the particular controllers they work with. For example, when a controller doesn't support alternate configurations or provide enough of the right types of endpoints, the gadget driver might not be able work with that controller, or might need to implement a less common variant of a device class protocol. # this first set of drivers all depend on bulk-capable hardware. config USB_CONFIGFS tristate "USB functions configurable through configfs" select USB_LIBCOMPOSITE help A Linux USB "gadget" can be set up through configfs. If this is the case, the USB functions (which from the host's perspective are seen as interfaces) and configurations are specified simply by creating appropriate directories in configfs. Associating functions with configurations is done by creating appropriate symbolic links. For more information see Documentation/usb/gadget_configfs.txt. config USB_CONFIGFS_SERIAL boolean "Generic serial bulk in/out" depends on USB_CONFIGFS depends on TTY select USB_U_SERIAL select USB_F_SERIAL help The function talks to the Linux-USB generic serial driver. config USB_CONFIGFS_ACM boolean "Abstract Control Model (CDC ACM)" depends on USB_CONFIGFS depends on TTY select USB_U_SERIAL select USB_F_ACM help ACM serial link. This function can be used to interoperate with MS-Windows hosts or with the Linux-USB "cdc-acm" driver. config USB_CONFIGFS_OBEX boolean "Object Exchange Model (CDC OBEX)" depends on USB_CONFIGFS depends on TTY select USB_U_SERIAL select USB_F_OBEX help You will need a user space OBEX server talking to /dev/ttyGS*, since the kernel itself doesn't implement the OBEX protocol. config USB_CONFIGFS_NCM boolean "Network Control Model (CDC NCM)" depends on USB_CONFIGFS depends on NET select USB_U_ETHER select USB_F_NCM help NCM is an advanced protocol for Ethernet encapsulation, allows grouping of several ethernet frames into one USB transfer and different alignment possibilities. config USB_CONFIGFS_ECM boolean "Ethernet Control Model (CDC ECM)" depends on USB_CONFIGFS depends on NET select USB_U_ETHER select USB_F_ECM help The "Communication Device Class" (CDC) Ethernet Control Model. That protocol is often avoided with pure Ethernet adapters, in favor of simpler vendor-specific hardware, but is widely supported by firmware for smart network devices. config USB_CONFIGFS_ECM_SUBSET boolean "Ethernet Control Model (CDC ECM) subset" depends on USB_CONFIGFS depends on NET select USB_U_ETHER select USB_F_SUBSET help On hardware that can't implement the full protocol, a simple CDC subset is used, placing fewer demands on USB. config USB_CONFIGFS_RNDIS bool "RNDIS" depends on USB_CONFIGFS depends on NET select USB_U_ETHER select USB_F_RNDIS help Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, and Microsoft provides redistributable binary RNDIS drivers for older versions of Windows. To make MS-Windows work with this, use Documentation/usb/linux.inf as the "driver info file". For versions of MS-Windows older than XP, you'll need to download drivers from Microsoft's website; a URL is given in comments found in that info file. config USB_CONFIGFS_EEM bool "Ethernet Emulation Model (EEM)" depends on USB_CONFIGFS depends on NET select USB_U_ETHER select USB_F_EEM help CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM and therefore can be supported by more hardware. Technically ECM and EEM are designed for different applications. The ECM model extends the network interface to the target (e.g. a USB cable modem), and the EEM model is for mobile devices to communicate with hosts using ethernet over USB. For Linux gadgets, however, the interface with the host is the same (a usbX device), so the differences are minimal. config USB_CONFIGFS_PHONET boolean "Phonet protocol" depends on USB_CONFIGFS depends on NET depends on PHONET select USB_U_ETHER select USB_F_PHONET help The Phonet protocol implementation for USB device. config USB_CONFIGFS_MASS_STORAGE boolean "Mass storage" depends on USB_CONFIGFS depends on BLOCK select USB_F_MASS_STORAGE help The Mass Storage Gadget acts as a USB Mass Storage disk drive. As its storage repository it can use a regular file or a block device (in much the same way as the "loop" device driver), specified as a module parameter or sysfs option. config USB_CONFIGFS_F_LB_SS boolean "Loopback and sourcesink function (for testing)" depends on USB_CONFIGFS select USB_F_SS_LB help Loopback function loops back a configurable number of transfers. Sourcesink function either sinks and sources bulk data. It also implements control requests, for "chapter 9" conformance. Make this be the first driver you try using on top of any new USB peripheral controller driver. Then you can use host-side test software, like the "usbtest" driver, to put your hardware and its driver through a basic set of functional tests. config USB_CONFIGFS_F_FS boolean "Function filesystem (FunctionFS)" depends on USB_CONFIGFS select USB_F_FS help The Function Filesystem (FunctionFS) lets one create USB composite functions in user space in the same way GadgetFS lets one create USB gadgets in user space. This allows creation of composite gadgets such that some of the functions are implemented in kernel space (for instance Ethernet, serial or mass storage) and other are implemented in user space. config USB_CONFIGFS_F_MTP boolean "MTP gadget" depends on USB_CONFIGFS select USB_F_MTP help USB gadget MTP support config USB_CONFIGFS_F_PTP boolean "PTP gadget" depends on USB_CONFIGFS && USB_CONFIGFS_F_MTP select USB_F_PTP help USB gadget PTP support config USB_CONFIGFS_F_ACC boolean "Accessory gadget" depends on USB_CONFIGFS select USB_F_ACC help USB gadget Accessory support config USB_CONFIGFS_F_AUDIO_SRC boolean "Audio Source gadget" depends on USB_CONFIGFS && USB_CONFIGFS_F_ACC select USB_F_AUDIO_SRC help USB gadget Audio Source support config USB_CONFIGFS_UEVENT boolean "Uevent notification of Gadget state" depends on USB_CONFIGFS help Enable uevent notifications to userspace when the gadget state changes. The gadget can be in any of the following three states: "CONNECTED/DISCONNECTED/CONFIGURED" config USB_G_ANDROID boolean "Android Composite Gadget" select USB_F_ACM select USB_F_SERIAL select USB_LIBCOMPOSITE select USB_F_FS select USB_U_SERIAL select USB_F_ECM select USB_F_NCM select USB_F_MASS_STORAGE select USB_F_UAC1 if SND_PCM help The Android Composite Gadget supports multiple USB functions: adb, acm, mass storage, mtp, accessory and rndis. Each function can be configured and enabled/disabled dynamically from userspace through a sysfs interface. config USB_ANDROID_RNDIS_DWORD_ALIGNED boolean "Use double word aligned" depends on USB_G_ANDROID help Provides dword aligned for DMA controller. source "drivers/usb/gadget/legacy/Kconfig" endchoice endif # USB_GADGET