# # Multimedia Video device configuration # menuconfig RADIO_ADAPTERS bool "Radio Adapters" depends on VIDEO_V4L2 depends on MEDIA_RADIO_SUPPORT default y ---help--- Say Y here to enable selecting AM/FM radio adapters. if RADIO_ADAPTERS && VIDEO_V4L2 config RADIO_TEA575X tristate config RADIO_SI470X bool "Silicon Labs Si470x FM Radio Receiver support" depends on VIDEO_V4L2 source "drivers/media/radio/si470x/Kconfig" config RADIO_SI4713 tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support" depends on VIDEO_V4L2 source "drivers/media/radio/si4713/Kconfig" config RADIO_SI476X tristate "Silicon Laboratories Si476x I2C FM Radio" depends on I2C && VIDEO_V4L2 depends on MFD_SI476X_CORE depends on SND_SOC select SND_SOC_SI476X ---help--- Choose Y here if you have this FM radio chip. In order to control your radio card, you will need to use programs that are compatible with the Video For Linux 2 API. Information on this API and pointers to "v4l2" programs may be found at . To compile this driver as a module, choose M here: the module will be called radio-si476x. config USB_MR800 tristate "AverMedia MR 800 USB FM radio support" depends on USB && VIDEO_V4L2 ---help--- Say Y here if you want to connect this type of radio to your computer's USB port. Note that the audio is not digital, and you must connect the line out connector to a sound card or a set of speakers. To compile this driver as a module, choose M here: the module will be called radio-mr800. config USB_DSBR tristate "D-Link/GemTek USB FM radio support" depends on USB && VIDEO_V4L2 ---help--- Say Y here if you want to connect this type of radio to your computer's USB port. Note that the audio is not digital, and you must connect the line out connector to a sound card or a set of speakers. To compile this driver as a module, choose M here: the module will be called dsbr100. config RADIO_MAXIRADIO tristate "Guillemot MAXI Radio FM 2000 radio" depends on VIDEO_V4L2 && PCI select RADIO_TEA575X ---help--- Choose Y here if you have this radio card. This card may also be found as Gemtek PCI FM. In order to control your radio card, you will need to use programs that are compatible with the Video For Linux API. Information on this API and pointers to "v4l" programs may be found at . To compile this driver as a module, choose M here: the module will be called radio-maxiradio. config RADIO_SHARK tristate "Griffin radioSHARK USB radio receiver" depends on USB select RADIO_TEA575X ---help--- Choose Y here if you have this radio receiver. There are 2 versions of this device, this driver is for version 1, which is white. In order to control your radio card, you will need to use programs that are compatible with the Video For Linux API. Information on this API and pointers to "v4l" programs may be found at . To compile this driver as a module, choose M here: the module will be called radio-shark. config RADIO_SHARK2 tristate "Griffin radioSHARK2 USB radio receiver" depends on USB ---help--- Choose Y here if you have this radio receiver. There are 2 versions of this device, this driver is for version 2, which is black. In order to control your radio card, you will need to use programs that are compatible with the Video For Linux API. Information on this API and pointers to "v4l" programs may be found at . To compile this driver as a module, choose M here: the module will be called radio-shark2. config USB_KEENE tristate "Keene FM Transmitter USB support" depends on USB && VIDEO_V4L2 ---help--- Say Y here if you want to connect this type of FM transmitter to your computer's USB port. To compile this driver as a module, choose M here: the module will be called radio-keene. config USB_RAREMONO tristate "Thanko's Raremono AM/FM/SW radio support" depends on USB && VIDEO_V4L2 ---help--- The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc. It is one of the very few or perhaps the only consumer USB radio device to receive the AM/FM/SW bands. Say Y here if you want to connect this type of AM/FM/SW receiver to your computer's USB port. To compile this driver as a module, choose M here: the module will be called radio-raremono. config USB_MA901 tristate "Masterkit MA901 USB FM radio support" depends on USB && VIDEO_V4L2 ---help--- Say Y here if you want to connect this type of radio to your computer's USB port. Note that the audio is not digital, and you must connect the line out connector to a sound card or a set of speakers or headphones. To compile this driver as a module, choose M here: the module will be called radio-ma901. config RADIO_TEA5764 tristate "TEA5764 I2C FM radio support" depends on I2C && VIDEO_V4L2 ---help--- Say Y here if you want to use the TEA5764 FM chip found in EZX phones. This FM chip is present in EZX phones from Motorola, connected to internal pxa I2C bus. To compile this driver as a module, choose M here: the module will be called radio-tea5764. config RADIO_TEA5764_XTAL bool "TEA5764 crystal reference" depends on RADIO_TEA5764=y default y help Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N here if TEA5764 reference frequency is connected in FREQIN. config RADIO_SAA7706H tristate "SAA7706H Car Radio DSP" depends on I2C && VIDEO_V4L2 ---help--- Say Y here if you want to use the SAA7706H Car radio Digital Signal Processor, found for instance on the Russellville development board. On the russellville the device is connected to internal timberdale I2C bus. To compile this driver as a module, choose M here: the module will be called SAA7706H. config RADIO_TEF6862 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" depends on I2C && VIDEO_V4L2 ---help--- Say Y here if you want to use the TEF6862 Car Radio Enhanced Selectivity Tuner, found for instance on the Russellville development board. On the russellville the device is connected to internal timberdale I2C bus. To compile this driver as a module, choose M here: the module will be called TEF6862. config RADIO_TIMBERDALE tristate "Enable the Timberdale radio driver" depends on MFD_TIMBERDALE && VIDEO_V4L2 depends on I2C # for RADIO_SAA7706H select RADIO_TEF6862 select RADIO_SAA7706H ---help--- This is a kind of umbrella driver for the Radio Tuner and DSP found behind the Timberdale FPGA on the Russellville board. Enabling this driver will automatically select the DSP and tuner. config RADIO_WL1273 tristate "Texas Instruments WL1273 I2C FM Radio" depends on I2C && VIDEO_V4L2 select MFD_CORE select MFD_WL1273_CORE select FW_LOADER ---help--- Choose Y here if you have this FM radio chip. In order to control your radio card, you will need to use programs that are compatible with the Video For Linux 2 API. Information on this API and pointers to "v4l2" programs may be found at . To compile this driver as a module, choose M here: the module will be called radio-wl1273. # TI's ST based wl128x FM radio source "drivers/media/radio/wl128x/Kconfig" # # ISA drivers configuration # menuconfig V4L_RADIO_ISA_DRIVERS bool "ISA radio devices" depends on ISA default n ---help--- Say Y here to enable support for these ISA drivers. if V4L_RADIO_ISA_DRIVERS config RADIO_ISA depends on ISA tristate config RADIO_CADET tristate "ADS Cadet AM/FM Tuner" depends on ISA && VIDEO_V4L2 ---help--- Choose Y here if you have one of these AM/FM radio cards, and then fill in the port address below. To compile this driver as a module, choose M here: the module will be called radio-cadet. config RADIO_RTRACK tristate "AIMSlab RadioTrack (aka RadioReveal) support" depends on ISA && VIDEO_V4L2 select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address below. Note that newer AIMSlab RadioTrack cards have a different chipset and are not supported by this driver. For these cards, use the RadioTrack II driver below. If you have a GemTeks combined (PnP) sound- and radio card you must use this driver as a module and setup the card with isapnptools. You must also pass the module a suitable io parameter, 0x248 has been reported to be used by these cards. More information is contained in the file . To compile this driver as a module, choose M here: the module will be called radio-aimslab. config RADIO_RTRACK_PORT hex "RadioTrack i/o port (0x20f or 0x30f)" depends on RADIO_RTRACK=y default "30f" help Enter either 0x30f or 0x20f here. The card default is 0x30f, if you haven't changed the jumper setting on the card. config RADIO_RTRACK2 tristate "AIMSlab RadioTrack II support" depends on ISA && VIDEO_V4L2 select RADIO_ISA ---help--- Choose Y here if you have this FM radio card, and then fill in the port address below. Note: this driver hasn't been tested since a long time due to lack of hardware. If you have this hardware, then please contact the linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-rtrack2. config RADIO_RTRACK2_PORT hex "RadioTrack II i/o port (0x20c or 0x30c)" depends on RADIO_RTRACK2=y default "30c" help Enter either 0x30c or 0x20c here. The card default is 0x30c, if you haven't changed the jumper setting on the card. config RADIO_AZTECH tristate "Aztech/Packard Bell Radio" depends on ISA && VIDEO_V4L2 select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address below. To compile this driver as a module, choose M here: the module will be called radio-aztech. config RADIO_AZTECH_PORT hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" depends on RADIO_AZTECH=y default "350" help Enter either 0x350 or 0x358 here. The card default is 0x350, if you haven't changed the setting of jumper JP3 on the card. Removing the jumper sets the card to 0x358. config RADIO_GEMTEK tristate "GemTek Radio card (or compatible) support" depends on ISA && VIDEO_V4L2 select RADIO_ISA ---help--- Choose Y here if you have this FM radio card, and then fill in the I/O port address and settings below. The following cards either have GemTek Radio tuner or are rebranded GemTek Radio cards: - Sound Vision 16 Gold with FM Radio - Typhoon Radio card (some models) - Hama Radio card To compile this driver as a module, choose M here: the module will be called radio-gemtek. config RADIO_GEMTEK_PORT hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)" depends on RADIO_GEMTEK=y default "34c" help Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The card default is 0x34c, if you haven't changed the jumper setting on the card. On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O port is 0x20c, 0x248 or 0x28c. If automatic I/O port probing is enabled this port will be used only in case of automatic probing failure, ie. as a fallback. config RADIO_GEMTEK_PROBE bool "Automatic I/O port probing" depends on RADIO_GEMTEK=y default y help Say Y here to enable automatic probing for GemTek Radio card. The following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 0x28c. config RADIO_MIROPCM20 tristate "miroSOUND PCM20 radio" depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND select SND_ISA select SND_MIRO ---help--- Choose Y here if you have this FM radio card. You also need to enable the ALSA sound system. This choice automatically selects the ALSA sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this is required for the radio-miropcm20. To compile this driver as a module, choose M here: the module will be called radio-miropcm20. config RADIO_SF16FMI tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" depends on ISA && VIDEO_V4L2 ---help--- Choose Y here if you have one of these FM radio cards. To compile this driver as a module, choose M here: the module will be called radio-sf16fmi. config RADIO_SF16FMR2 tristate "SF16-FMR2/SF16-FMD2 Radio" depends on ISA && VIDEO_V4L2 select RADIO_TEA575X ---help--- Choose Y here if you have one of these FM radio cards. To compile this driver as a module, choose M here: the module will be called radio-sf16fmr2. config RADIO_TERRATEC tristate "TerraTec ActiveRadio ISA Standalone" depends on ISA && VIDEO_V4L2 select RADIO_ISA ---help--- Choose Y here if you have this FM radio card. Note: this driver hasn't been tested since a long time due to lack of hardware. If you have this hardware, then please contact the linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-terratec. config RADIO_TRUST tristate "Trust FM radio card" depends on ISA && VIDEO_V4L2 select RADIO_ISA help This is a driver for the Trust FM radio cards. Say Y if you have such a card and want to use it under Linux. Note: this driver hasn't been tested since a long time due to lack of hardware. If you have this hardware, then please contact the linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-trust. config RADIO_TRUST_PORT hex "Trust i/o port (usually 0x350 or 0x358)" depends on RADIO_TRUST=y default "350" help Enter the I/O port of your Trust FM radio card. If unsure, try the values "0x350" or "0x358". config RADIO_TYPHOON tristate "Typhoon Radio (a.k.a. EcoRadio)" depends on ISA && VIDEO_V4L2 select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address and the frequency used for muting below. Note: this driver hasn't been tested since a long time due to lack of hardware. If you have this hardware, then please contact the linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-typhoon. config RADIO_TYPHOON_PORT hex "Typhoon I/O port (0x316 or 0x336)" depends on RADIO_TYPHOON=y default "316" help Enter the I/O port of your Typhoon or EcoRadio radio card. config RADIO_TYPHOON_MUTEFREQ int "Typhoon frequency set when muting the device (kHz)" depends on RADIO_TYPHOON=y default "87500" help Enter the frequency used for muting the radio. The device is never completely silent. If the volume is just turned down, you can still hear silent voices and music. For that reason, the frequency of the radio device is set to the frequency you can enter here whenever the device is muted. There should be no local radio station at that frequency. config RADIO_ZOLTRIX tristate "Zoltrix Radio" depends on ISA && VIDEO_V4L2 select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address below. Note: this driver hasn't been tested since a long time due to lack of hardware. If you have this hardware, then please contact the linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-zoltrix. config RADIO_ZOLTRIX_PORT hex "ZOLTRIX I/O port (0x20c or 0x30c)" depends on RADIO_ZOLTRIX=y default "20c" help Enter the I/O port of your Zoltrix radio card. endif # V4L_RADIO_ISA_DRIVERS config RADIO_IRIS tristate "QTI IRIS FM support" depends on VIDEO_V4L2 ---help--- Say Y here if you want to use the QTI FM chip (IRIS). This FM chip uses SMD interface To compile this driver as a module, choose M here: the module will be called radio-iris. config RADIO_IRIS_TRANSPORT tristate "QTI IRIS Transport" depends on RADIO_IRIS ---help--- Say Y here if you want to use the QTI FM chip (IRIS). with SMD as transport. To compile this driver as a module, choose M here: the module will be called radio-iris-transport. config RADIO_SILABS tristate "SILABS FM" depends on I2C && VIDEO_V4L2 ---help--- Say Y here if you want to use the SiLabs' FM chip with I2C as transport. endif # RADIO_ADAPTERS