/* * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "msm8937-pinctrl.dtsi" #include "msm8937-camera-sensor-mtp.dtsi" &flash_led { compatible = "qcom,qpnp-flash-led"; reg = <0xd300 0x100>; pinctrl-names = "flash_led_enable","flash_led_disable"; pinctrl-0 = <&rear_flash_led_enable>; pinctrl-1 = <&rear_flash_led_disable>; qcom,follow-otst2-rb-disabled; }; &wled { qcom,cons-sync-write-delay-us = <1000>; }; &soc { gpio_keys { compatible = "gpio-keys"; input-name = "gpio-keys"; pinctrl-names = "tlmm_gpio_key_active","tlmm_gpio_key_suspend"; pinctrl-0 = <&gpio_key_active>; pinctrl-1 = <&gpio_key_suspend>; camera_focus { label = "camera_focus"; gpios = <&tlmm 128 0x1>; linux,input-type = <1>; linux,code = <0x210>; debounce-interval = <15>; }; camera_snapshot { label = "camera_snapshot"; gpios = <&tlmm 127 0x1>; linux,input-type = <1>; linux,code = <0x2fe>; debounce-interval = <15>; }; vol_up { label = "volume_up"; gpios = <&tlmm 91 0x1>; linux,input-type = <1>; linux,code = <115>; debounce-interval = <15>; }; }; hbtp { compatible = "qcom,hbtp-input"; vcc_ana-supply = <&pm8937_l10>; vcc_dig-supply = <&pm8937_l5>; qcom,afe-load = <50000>; qcom,afe-vtg-min = <2850000>; qcom,afe-vtg-max = <2850000>; qcom,dig-load = <15000>; qcom,dig-vtg-min = <1800000>; qcom,dig-vtg-max = <1800000>; }; }; &blsp1_uart2 { status = "ok"; pinctrl-names = "default"; pinctrl-0 = <&uart_console_active>; }; &pmi_haptic{ qcom,wave-play-rate-us = <4165>; qcom,actuator-type = "lra"; }; &spi_3 { /* BLSP1 QUP3 */ maxim_sti@0 { status = "disabled"; compatible = "maxim,maxim_sti"; reg = <0>; interrupt-parent = <&tlmm>; interrupts = <65 0>; spi-max-frequency = <16000000>; avdd-supply = <&pm8937_l10>; dvdd-supply = <&pm8937_l5>; maxim_sti,irq-gpio = <&tlmm 65 0x00>; maxim_sti,reset-gpio = <&tlmm 64 0x00>; maxim_sti,touch_fusion = "/vendor/bin/touch_fusion"; maxim_sti,config_file = "/etc/firmware/qtc800s.cfg"; maxim_sti,fw_name = "qtc800s.bin"; pinctrl-names = "pmx_ts_active","pmx_ts_suspend", "pmx_ts_release"; pinctrl-0 = <&ts_int_active &ts_reset_active>; pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; pinctrl-2 = <&ts_release>; }; }; &i2c_5 { /* BLSP2 QUP1 */ nq@28 { compatible = "qcom,nq-nci"; reg = <0x28>; qcom,nq-irq = <&tlmm 17 0x00>; qcom,nq-ven = <&tlmm 16 0x00>; qcom,nq-firm = <&tlmm 130 0x00>; qcom,nq-clkreq = <&pm8937_gpios 5 0x00>; interrupt-parent = <&tlmm>; qcom,clk-src = "BBCLK2"; interrupts = <17 0>; interrupt-names = "nfc_irq"; pinctrl-names = "nfc_active", "nfc_suspend"; pinctrl-0 = <&nfc_int_active &nfc_disable_active>; pinctrl-1 = <&nfc_int_suspend &nfc_disable_suspend>; clocks = <&clock_gcc clk_bb_clk2_pin>; clock-names = "ref_clk"; }; }; &sdhc_1 { /* device core power supply */ vdd-supply = <&pm8937_l8>; qcom,vdd-voltage-level = <2900000 2900000>; qcom,vdd-current-level = <200 570000>; /* device communication power supply */ vdd-io-supply = <&pm8937_l5>; qcom,vdd-io-always-on; qcom,vdd-io-lpm-sup; qcom,vdd-io-voltage-level = <1800000 1800000>; qcom,vdd-io-current-level = <200 325000>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000 384000000>; qcom,nonremovable; qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v"; status = "ok"; }; &sdhc_2 { /* device core power supply */ vdd-supply = <&pm8937_l11>; qcom,vdd-voltage-level = <2950000 2950000>; qcom,vdd-current-level = <15000 800000>; /* device communication power supply */ vdd-io-supply = <&pm8937_l12>; qcom,vdd-io-voltage-level = <1800000 2950000>; qcom,vdd-io-current-level = <200 22000>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; #address-cells = <0>; interrupt-parent = <&sdhc_2>; interrupts = <0 1 2>; #interrupt-cells = <1>; interrupt-map-mask = <0xffffffff>; interrupt-map = <0 &intc 0 125 0 1 &intc 0 221 0 2 &tlmm 67 0>; interrupt-names = "hc_irq", "pwr_irq", "status_irq"; cd-gpios = <&tlmm 67 0x1>; qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>; qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; status = "ok"; }; &pm8937_gpios { gpio@c400 { qcom,mode = <0>; qcom,output-type = <0>; qcom,pull = <0>; qcom,vin-sel = <2>; qcom,out-strength = <3>; qcom,src-sel = <0>; qcom,master-en = <1>; status = "okay"; }; }; #include "msm8937-mdss-panels.dtsi" &mdss_mdp { qcom,mdss-pref-prim-intf = "dsi"; }; &mdss_dsi { hw-config = "single_dsi"; }; &mdss_dsi0 { qcom,dsi-pref-prim-pan = <&dsi_truly_1080_vid>; pinctrl-names = "mdss_default", "mdss_sleep"; pinctrl-0 = <&mdss_dsi_active &mdss_te_active>; pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>; qcom,platform-te-gpio = <&tlmm 24 0>; qcom,platform-enable-gpio = <&tlmm 99 0>; qcom,platform-reset-gpio = <&tlmm 60 0>; qcom,platform-bklight-en-gpio = <&tlmm 98 0>; }; &mdss_dsi1 { status = "disabled"; qcom,dsi-pref-prim-pan = <&dsi_truly_1080_vid>; pinctrl-names = "mdss_default", "mdss_sleep"; pinctrl-0 = <&mdss_dsi_active &mdss_te_active>; pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>; qcom,platform-te-gpio = <&tlmm 24 0>; qcom,platform-enable-gpio = <&tlmm 99 0>; qcom,platform-reset-gpio = <&tlmm 60 0>; qcom,platform-bklight-en-gpio = <&tlmm 98 0>; }; &dsi_truly_1080_vid { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-pan-enable-dynamic-fps; qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp"; }; &dsi_truly_1080_cmd { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,ulps-enabled; qcom,partial-update-enabled; qcom,panel-roi-alignment = <2 2 4 2 1080 2>; }; &dsi_truly_720_vid { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-pan-enable-dynamic-fps; qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp"; }; /* PM8937 GPIO configuration */ &pm8937_gpios { gpio@c100 { qcom,mode = <0>; qcom,vin-sel = <3>; qcom,dtest-sel = <1>; status = "okay"; }; }; &qpdi { qcom,pmic-carddetect-gpio = <&pm8937_gpios 0x2 0>; };