/*
 * Copyright (c) 2015, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;

#include "msm8909-pm8916-qrd-skut.dtsi"

/ {
	qcom,board-id= <0x1000b 0xa>, <0x1040b 0xa>;
};

&soc {
	/*
	 * DT node to add support for SMB358 charger and integrate
	 * with VM-BMS
	 */
	i2c@78b8000 {
		smb358_otg_vreg: smb358-charger@6c {
			compatible = "qcom,smb358-charger";
			reg = <0x6c>;
			interrupt-parent = <&msm_gpio>;
			interrupts = <110 8>;
			pinctrl-names = "default";
			pinctrl-0 = <&smb_int_default>;

			qcom,float-voltage-mv = <4350>;
			qcom,recharge-mv = <100>;
			regulator-name = "smb358_otg_vreg";
			qcom,thermal-mitigation = <1500 700 600 0>;
			qcom,fastchg-current-max-ma = <1500>;

			qcom,disable-apsd;
			qcom,bms-psy-name = "bms";
			qcom,bms-controlled-charging;
			qcom,iterm-disabled;
			qcom,chg-inhibit-disabled;
			qcom,chg-vadc = <&pm8916_vadc>;
			qcom,chg-adc_tm = <&pm8916_adc_tm>;
			qcom,irq-gpio = <&msm_gpio 110 0x00>;

			qcom,using-pmic-therm;
			qcom,hot-bat-decidegc = <520>;
			qcom,cold-bat-decidegc = <0>;
			qcom,bat-present-decidegc = <200>;
			/*
			 * Below preperties are used for enable JEITA
			 */
			qcom,warm-bat-decidegc = <450>;
			qcom,cool-bat-decidegc = <0>;
			qcom,warm-bat-ma = <1000>;
			qcom,cool-bat-ma = <1000>;
			qcom,warm-bat-mv = <4000>;
			qcom,cool-bat-mv = <4000>;
			status = "ok";
		};
	};
};

&pm8916_chg {
	status = "ok";
	qcom,use-external-charger;
};

/ {
	qrd_batterydata: qcom,battery-data {
		qcom,rpull-up-kohm = <0>;
		qcom,vref-batt-therm = <1800000>;

		#include "batterydata-qrd-skut-4v35-2300mah.dtsi"
	};
};

&pm8916_bms {
	status = "ok";
	qcom,resume-soc = <99>;
	qcom,battery-data = <&qrd_batterydata>;
};