/* * Copyright (c) 2004-2010 Atheros Communications Inc. * Copyright (c) 2011 Qualcomm Atheros, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef TARGET_H #define TARGET_H #define AR6003_BOARD_DATA_SZ 1024 #define AR6003_BOARD_EXT_DATA_SZ 768 #define AR6003_BOARD_EXT_DATA_SZ_V2 1024 #define AR6004_BOARD_DATA_SZ 6144 #define AR6004_BOARD_EXT_DATA_SZ 0 #define RESET_CONTROL_ADDRESS 0x00000000 #define RESET_CONTROL_COLD_RST 0x00000100 #define RESET_CONTROL_MBOX_RST 0x00000004 #define CPU_CLOCK_STANDARD_S 0 #define CPU_CLOCK_STANDARD 0x00000003 #define CPU_CLOCK_ADDRESS 0x00000020 #define CLOCK_CONTROL_ADDRESS 0x00000028 #define CLOCK_CONTROL_LF_CLK32_S 2 #define CLOCK_CONTROL_LF_CLK32 0x00000004 #define SYSTEM_SLEEP_ADDRESS 0x000000c4 #define SYSTEM_SLEEP_DISABLE_S 0 #define SYSTEM_SLEEP_DISABLE 0x00000001 #define LPO_CAL_ADDRESS 0x000000e0 #define LPO_CAL_ENABLE_S 20 #define LPO_CAL_ENABLE 0x00100000 #define GPIO_PIN9_ADDRESS 0x0000004c #define GPIO_PIN10_ADDRESS 0x00000050 #define GPIO_PIN11_ADDRESS 0x00000054 #define GPIO_PIN12_ADDRESS 0x00000058 #define GPIO_PIN13_ADDRESS 0x0000005c #define HOST_INT_STATUS_ADDRESS 0x00000400 #define HOST_INT_STATUS_ERROR_S 7 #define HOST_INT_STATUS_ERROR 0x00000080 #define HOST_INT_STATUS_CPU_S 6 #define HOST_INT_STATUS_CPU 0x00000040 #define HOST_INT_STATUS_COUNTER_S 4 #define HOST_INT_STATUS_COUNTER 0x00000010 #define CPU_INT_STATUS_ADDRESS 0x00000401 #define ERROR_INT_STATUS_ADDRESS 0x00000402 #define ERROR_INT_STATUS_WAKEUP_S 2 #define ERROR_INT_STATUS_WAKEUP 0x00000004 #define ERROR_INT_STATUS_RX_UNDERFLOW_S 1 #define ERROR_INT_STATUS_RX_UNDERFLOW 0x00000002 #define ERROR_INT_STATUS_TX_OVERFLOW_S 0 #define ERROR_INT_STATUS_TX_OVERFLOW 0x00000001 #define COUNTER_INT_STATUS_ADDRESS 0x00000403 #define COUNTER_INT_STATUS_COUNTER_S 0 #define COUNTER_INT_STATUS_COUNTER 0x000000ff #define RX_LOOKAHEAD_VALID_ADDRESS 0x00000405 #define INT_STATUS_ENABLE_ADDRESS 0x00000418 #define INT_STATUS_ENABLE_ERROR_S 7 #define INT_STATUS_ENABLE_ERROR 0x00000080 #define INT_STATUS_ENABLE_CPU_S 6 #define INT_STATUS_ENABLE_CPU 0x00000040 #define INT_STATUS_ENABLE_INT_S 5 #define INT_STATUS_ENABLE_INT 0x00000020 #define INT_STATUS_ENABLE_COUNTER_S 4 #define INT_STATUS_ENABLE_COUNTER 0x00000010 #define INT_STATUS_ENABLE_MBOX_DATA_S 0 #define INT_STATUS_ENABLE_MBOX_DATA 0x0000000f #define CPU_INT_STATUS_ENABLE_ADDRESS 0x00000419 #define CPU_INT_STATUS_ENABLE_BIT_S 0 #define CPU_INT_STATUS_ENABLE_BIT 0x000000ff #define ERROR_STATUS_ENABLE_ADDRESS 0x0000041a #define ERROR_STATUS_ENABLE_RX_UNDERFLOW_S 1 #define ERROR_STATUS_ENABLE_RX_UNDERFLOW 0x00000002 #define ERROR_STATUS_ENABLE_TX_OVERFLOW_S 0 #define ERROR_STATUS_ENABLE_TX_OVERFLOW 0x00000001 #define COUNTER_INT_STATUS_ENABLE_ADDRESS 0x0000041b #define COUNTER_INT_STATUS_ENABLE_BIT_S 0 #define COUNTER_INT_STATUS_ENABLE_BIT 0x000000ff #define COUNT_ADDRESS 0x00000420 #define COUNT_DEC_ADDRESS 0x00000440 #define WINDOW_DATA_ADDRESS 0x00000474 #define WINDOW_WRITE_ADDR_ADDRESS 0x00000478 #define WINDOW_READ_ADDR_ADDRESS 0x0000047c #define CPU_DBG_SEL_ADDRESS 0x00000483 #define CPU_DBG_ADDRESS 0x00000484 #define LOCAL_SCRATCH_ADDRESS 0x000000c0 #define ATH6KL_OPTION_SLEEP_DISABLE 0x08 #define RTC_BASE_ADDRESS 0x00004000 #define GPIO_BASE_ADDRESS 0x00014000 #define MBOX_BASE_ADDRESS 0x00018000 #define ANALOG_INTF_BASE_ADDRESS 0x0001c000 #define WLAN_BOOTSTRAP_ADDRESS 0x00014140 #define BOOTSTRAP_IS_HSIC(v) ((v) & (1 << 10)) #define BOOTSTRAP_IS_USB(v) ((v) & (1 << 11)) /* real name of the register is unknown */ #define ATH6KL_ANALOG_PLL_REGISTER (ANALOG_INTF_BASE_ADDRESS + 0x284) #define SM(f, v) (((v) << f##_S) & f) #define MS(f, v) (((v) & f) >> f##_S) /* * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the * host_interest structure. * * Host Interest is shared between Host and Target in order to coordinate * between the two, and is intended to remain constant (with additions only * at the end). */ #define ATH6KL_AR6003_HI_START_ADDR 0x00540600 #define ATH6KL_AR6004_HI_START_ADDR 0x00400800 /* * These are items that the Host may need to access * via BMI or via the Diagnostic Window. The position * of items in this structure must remain constant. * across firmware revisions! * * Types for each item must be fixed size across target and host platforms. * The structure is used only to calculate offset for each register with * HI_ITEM() macro, no values are stored to it. * * More items may be added at the end. */ struct host_interest { /* * Pointer to application-defined area, if any. * Set by Target application during startup. */ u32 hi_app_host_interest; /* 0x00 */ /* Pointer to register dump area, valid after Target crash. */ u32 hi_failure_state; /* 0x04 */ /* Pointer to debug logging header */ u32 hi_dbglog_hdr; /* 0x08 */ u32 hi_unused1; /* 0x0c */ /* * General-purpose flag bits, similar to ATH6KL_OPTION_* flags. * Can be used by application rather than by OS. */ u32 hi_option_flag; /* 0x10 */ /* * Boolean that determines whether or not to * display messages on the serial port. */ u32 hi_serial_enable; /* 0x14 */ /* Start address of DataSet index, if any */ u32 hi_dset_list_head; /* 0x18 */ /* Override Target application start address */ u32 hi_app_start; /* 0x1c */ /* Clock and voltage tuning */ u32 hi_skip_clock_init; /* 0x20 */ u32 hi_core_clock_setting; /* 0x24 */ u32 hi_cpu_clock_setting; /* 0x28 */ u32 hi_system_sleep_setting; /* 0x2c */ u32 hi_xtal_control_setting; /* 0x30 */ u32 hi_pll_ctrl_setting_24ghz; /* 0x34 */ u32 hi_pll_ctrl_setting_5ghz; /* 0x38 */ u32 hi_ref_voltage_trim_setting; /* 0x3c */ u32 hi_clock_info; /* 0x40 */ /* * Flash configuration overrides, used only * when firmware is not executing from flash. * (When using flash, modify the global variables * with equivalent names.) */ u32 hi_bank0_addr_value; /* 0x44 */ u32 hi_bank0_read_value; /* 0x48 */ u32 hi_bank0_write_value; /* 0x4c */ u32 hi_bank0_config_value; /* 0x50 */ /* Pointer to Board Data */ u32 hi_board_data; /* 0x54 */ u32 hi_board_data_initialized; /* 0x58 */ u32 hi_dset_ram_index_tbl; /* 0x5c */ u32 hi_desired_baud_rate; /* 0x60 */ u32 hi_dbglog_config; /* 0x64 */ u32 hi_end_ram_reserve_sz; /* 0x68 */ u32 hi_mbox_io_block_sz; /* 0x6c */ u32 hi_num_bpatch_streams; /* 0x70 -- unused */ u32 hi_mbox_isr_yield_limit; /* 0x74 */ u32 hi_refclk_hz; /* 0x78 */ u32 hi_ext_clk_detected; /* 0x7c */ u32 hi_dbg_uart_txpin; /* 0x80 */ u32 hi_dbg_uart_rxpin; /* 0x84 */ u32 hi_hci_uart_baud; /* 0x88 */ u32 hi_hci_uart_pin_assignments; /* 0x8C */ /* * NOTE: byte [0] = tx pin, [1] = rx pin, [2] = rts pin, [3] = cts * pin */ u32 hi_hci_uart_baud_scale_val; /* 0x90 */ u32 hi_hci_uart_baud_step_val; /* 0x94 */ u32 hi_allocram_start; /* 0x98 */ u32 hi_allocram_sz; /* 0x9c */ u32 hi_hci_bridge_flags; /* 0xa0 */ u32 hi_hci_uart_support_pins; /* 0xa4 */ /* * NOTE: byte [0] = RESET pin (bit 7 is polarity), * bytes[1]..bytes[3] are for future use */ u32 hi_hci_uart_pwr_mgmt_params; /* 0xa8 */ /* * 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high * [31:16]: wakeup timeout in ms */ /* Pointer to extended board data */ u32 hi_board_ext_data; /* 0xac */ u32 hi_board_ext_data_config; /* 0xb0 */ /* * Bit [0] : valid * Bit[31:16: size */ /* * hi_reset_flag is used to do some stuff when target reset. * such as restore app_start after warm reset or * preserve host Interest area, or preserve ROM data, literals etc. */ u32 hi_reset_flag; /* 0xb4 */ /* indicate hi_reset_flag is valid */ u32 hi_reset_flag_valid; /* 0xb8 */ u32 hi_hci_uart_pwr_mgmt_params_ext; /* 0xbc */ /* * 0xbc - [31:0]: idle timeout in ms */ /* ACS flags */ u32 hi_acs_flags; /* 0xc0 */ u32 hi_console_flags; /* 0xc4 */ u32 hi_nvram_state; /* 0xc8 */ u32 hi_option_flag2; /* 0xcc */ /* If non-zero, override values sent to Host in WMI_READY event. */ u32 hi_sw_version_override; /* 0xd0 */ u32 hi_abi_version_override; /* 0xd4 */ /* * Percentage of high priority RX traffic to total expected RX traffic - * applicable only to ar6004 */ u32 hi_hp_rx_traffic_ratio; /* 0xd8 */ /* test applications flags */ u32 hi_test_apps_related ; /* 0xdc */ /* location of test script */ u32 hi_ota_testscript; /* 0xe0 */ /* location of CAL data */ u32 hi_cal_data; /* 0xe4 */ /* Number of packet log buffers */ u32 hi_pktlog_num_buffers; /* 0xe8 */ /* wow extension configuration */ u32 hi_wow_ext_config; /* 0xec */ u32 hi_pwr_save_flags; /* 0xf0 */ } __packed; #define HI_ITEM(item) offsetof(struct host_interest, item) #define HI_OPTION_MAC_ADDR_METHOD_SHIFT 3 #define HI_OPTION_FW_MODE_IBSS 0x0 #define HI_OPTION_FW_MODE_BSS_STA 0x1 #define HI_OPTION_FW_MODE_AP 0x2 #define HI_OPTION_FW_SUBMODE_NONE 0x0 #define HI_OPTION_FW_SUBMODE_P2PDEV 0x1 #define HI_OPTION_FW_SUBMODE_P2PCLIENT 0x2 #define HI_OPTION_FW_SUBMODE_P2PGO 0x3 /* hi_option_flag2 options: Disable MAC address overwrite via OTP Feature */ #define HI_OPTION_DISABLE_MAC_OTP 0x40 #define HI_OPTION_NUM_DEV_SHIFT 0x9 #define HI_OPTION_FW_BRIDGE_SHIFT 0x04 /* Fw Mode/SubMode Mask |------------------------------------------------------------------------------| | SUB | SUB | SUB | SUB | | | | | MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0| | (2) | (2) | (2) | (2) | (2) | (2) | (2) | (2) |------------------------------------------------------------------------------| */ #define HI_OPTION_FW_MODE_BITS 0x2 #define HI_OPTION_FW_MODE_SHIFT 0xC #define HI_OPTION_FW_SUBMODE_BITS 0x2 #define HI_OPTION_FW_SUBMODE_SHIFT 0x14 /* hi_option_flag2 options */ #define AMSDU_SLICING_OFFLOAD_TO_FW 0x1 #define HI_OPTION_BAM2BAM_MODE 0x800000 /* Enable BAM2BAM mode */ /* hi_option_flag2 bit fields */ #define HI_OPTION_AP_CLIENT_CNT 0x3c00 /* max number of clients supportedAP mode */ /* hi_option_flag2 mask & shift count */ #define HI_OPTION_AP_CLIENT_CNT_SHIFT 0xA /* 4-bits(bit13-bit10) to notify number of clients in AP mode */ #define HI_OPTION_AP_CLIENT_CNT_MASK 0xF /* Enable Multichannel Concurrency (MCC) */ #define HI_OPTION_MCC_ENABLE 0x80000000 /*power save flag bit definitions*/ #define HI_PWR_SAVE_LPL_ENABLED 0x1 /* power save mode - reduced power listen */ #define HI_PWR_SAVE_LPL_DEV_MASK 0x3 #define HI_PWR_SAVE_LPL_DEV0_LSB 4 /* Convert a Target virtual address into a Target physical address */ #define AR6003_VTOP(vaddr) ((vaddr) & 0x001fffff) #define AR6004_VTOP(vaddr) (vaddr) #define TARG_VTOP(target_type, vaddr) \ (((target_type) == TARGET_TYPE_AR6003) ? AR6003_VTOP(vaddr) : \ (((target_type) == TARGET_TYPE_AR6004) ? AR6004_VTOP(vaddr) : 0)) #define ATH6KL_FWLOG_PAYLOAD_SIZE 1500 struct ath6kl_dbglog_buf { __le32 next; __le32 buffer_addr; __le32 bufsize; __le32 length; __le32 count; __le32 free; } __packed; struct ath6kl_dbglog_hdr { __le32 dbuf_addr; __le32 dropped; } __packed; #endif