/* * f_qc_ecm.c -- USB CDC Ethernet (ECM) link function driver * * Copyright (C) 2003-2005,2008 David Brownell * Copyright (C) 2008 Nokia Corporation * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ #ifdef pr_fmt #undef pr_fmt #endif #define pr_fmt(fmt) "%s: " fmt, __func__ #include #include #include #include #include "u_ether.h" #include "u_qc_ether.h" #include "u_bam_data.h" #include /* * This function is a "CDC Ethernet Networking Control Model" (CDC ECM) * Ethernet link. The data transfer model is simple (packets sent and * received over bulk endpoints using normal short packet termination), * and the control model exposes various data and optional notifications. * * ECM is well standardized and (except for Microsoft) supported by most * operating systems with USB host support. It's the preferred interop * solution for Ethernet over USB, at least for firmware based solutions. * (Hardware solutions tend to be more minimalist.) A newer and simpler * "Ethernet Emulation Model" (CDC EEM) hasn't yet caught on. * * Note that ECM requires the use of "alternate settings" for its data * interface. This means that the set_alt() method has real work to do, * and also means that a get_alt() method is required. * * This function is based on USB CDC Ethernet link function driver and * contains MSM specific implementation. */ enum ecm_qc_notify_state { ECM_QC_NOTIFY_NONE, /* don't notify */ ECM_QC_NOTIFY_CONNECT, /* issue CONNECT next */ ECM_QC_NOTIFY_SPEED, /* issue SPEED_CHANGE next */ }; struct f_ecm_qc { struct qc_gether port; u8 ctrl_id, data_id; enum transport_type xport; u8 port_num; char ethaddr[14]; struct usb_ep *notify; struct usb_request *notify_req; u8 notify_state; bool is_open; struct data_port bam_port; bool ecm_mdm_ready_trigger; bool data_interface_up; }; static struct f_ecm_qc *__ecm; static struct ecm_ipa_params ipa_params; static inline struct f_ecm_qc *func_to_ecm_qc(struct usb_function *f) { return container_of(f, struct f_ecm_qc, port.func); } /* peak (theoretical) bulk transfer rate in bits-per-second */ static inline unsigned ecm_qc_bitrate(struct usb_gadget *g) { if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) return 13 * 512 * 8 * 1000 * 8; else return 19 * 64 * 1 * 1000 * 8; } /*-------------------------------------------------------------------------*/ /* * Include the status endpoint if we can, even though it's optional. * * Use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one * packet, to simplify cancellation; and a big transfer interval, to * waste less bandwidth. * * Some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even * if they ignore the connect/disconnect notifications that real aether * can provide. More advanced cdc configurations might want to support * encapsulated commands (vendor-specific, using control-OUT). */ #define ECM_QC_LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */ #define ECM_QC_STATUS_BYTECOUNT 16 /* 8 byte header + data */ /* Currently only one std ecm instance is supported - port index 0. */ #define ECM_QC_NO_PORTS 1 #define ECM_QC_DEFAULT_PORT 0 #define ECM_QC_ACTIVE_PORT 0 /* interface descriptor: */ static struct usb_interface_descriptor ecm_qc_control_intf = { .bLength = sizeof ecm_qc_control_intf, .bDescriptorType = USB_DT_INTERFACE, /* .bInterfaceNumber = DYNAMIC */ /* status endpoint is optional; this could be patched later */ .bNumEndpoints = 1, .bInterfaceClass = USB_CLASS_COMM, .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, .bInterfaceProtocol = USB_CDC_PROTO_NONE, /* .iInterface = DYNAMIC */ }; static struct usb_cdc_header_desc ecm_qc_header_desc = { .bLength = sizeof ecm_qc_header_desc, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, .bcdCDC = cpu_to_le16(0x0110), }; static struct usb_cdc_union_desc ecm_qc_union_desc = { .bLength = sizeof(ecm_qc_union_desc), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_UNION_TYPE, /* .bMasterInterface0 = DYNAMIC */ /* .bSlaveInterface0 = DYNAMIC */ }; static struct usb_cdc_ether_desc ecm_qc_desc = { .bLength = sizeof ecm_qc_desc, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_ETHERNET_TYPE, /* this descriptor actually adds value, surprise! */ /* .iMACAddress = DYNAMIC */ .bmEthernetStatistics = cpu_to_le32(0), /* no statistics */ .wMaxSegmentSize = cpu_to_le16(ETH_FRAME_LEN), .wNumberMCFilters = cpu_to_le16(0), .bNumberPowerFilters = 0, }; /* the default data interface has no endpoints ... */ static struct usb_interface_descriptor ecm_qc_data_nop_intf = { .bLength = sizeof ecm_qc_data_nop_intf, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 1, .bAlternateSetting = 0, .bNumEndpoints = 0, .bInterfaceClass = USB_CLASS_CDC_DATA, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, /* .iInterface = DYNAMIC */ }; /* ... but the "real" data interface has two bulk endpoints */ static struct usb_interface_descriptor ecm_qc_data_intf = { .bLength = sizeof ecm_qc_data_intf, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 1, .bAlternateSetting = 1, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_CDC_DATA, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, /* .iInterface = DYNAMIC */ }; /* full speed support: */ static struct usb_endpoint_descriptor ecm_qc_fs_notify_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(ECM_QC_STATUS_BYTECOUNT), .bInterval = 1 << ECM_QC_LOG2_STATUS_INTERVAL_MSEC, }; static struct usb_endpoint_descriptor ecm_qc_fs_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static struct usb_endpoint_descriptor ecm_qc_fs_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static struct usb_descriptor_header *ecm_qc_fs_function[] = { /* CDC ECM control descriptors */ (struct usb_descriptor_header *) &ecm_qc_control_intf, (struct usb_descriptor_header *) &ecm_qc_header_desc, (struct usb_descriptor_header *) &ecm_qc_union_desc, (struct usb_descriptor_header *) &ecm_qc_desc, /* NOTE: status endpoint might need to be removed */ (struct usb_descriptor_header *) &ecm_qc_fs_notify_desc, /* data interface, altsettings 0 and 1 */ (struct usb_descriptor_header *) &ecm_qc_data_nop_intf, (struct usb_descriptor_header *) &ecm_qc_data_intf, (struct usb_descriptor_header *) &ecm_qc_fs_in_desc, (struct usb_descriptor_header *) &ecm_qc_fs_out_desc, NULL, }; /* high speed support: */ static struct usb_endpoint_descriptor ecm_qc_hs_notify_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(ECM_QC_STATUS_BYTECOUNT), .bInterval = ECM_QC_LOG2_STATUS_INTERVAL_MSEC + 4, }; static struct usb_endpoint_descriptor ecm_qc_hs_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor ecm_qc_hs_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *ecm_qc_hs_function[] = { /* CDC ECM control descriptors */ (struct usb_descriptor_header *) &ecm_qc_control_intf, (struct usb_descriptor_header *) &ecm_qc_header_desc, (struct usb_descriptor_header *) &ecm_qc_union_desc, (struct usb_descriptor_header *) &ecm_qc_desc, /* NOTE: status endpoint might need to be removed */ (struct usb_descriptor_header *) &ecm_qc_hs_notify_desc, /* data interface, altsettings 0 and 1 */ (struct usb_descriptor_header *) &ecm_qc_data_nop_intf, (struct usb_descriptor_header *) &ecm_qc_data_intf, (struct usb_descriptor_header *) &ecm_qc_hs_in_desc, (struct usb_descriptor_header *) &ecm_qc_hs_out_desc, NULL, }; static struct usb_endpoint_descriptor ecm_qc_ss_notify_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(ECM_QC_STATUS_BYTECOUNT), .bInterval = ECM_QC_LOG2_STATUS_INTERVAL_MSEC + 4, }; static struct usb_ss_ep_comp_descriptor ecm_qc_ss_notify_comp_desc = { .bLength = sizeof(ecm_qc_ss_notify_comp_desc), .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, /* the following 3 values can be tweaked if necessary */ /* .bMaxBurst = 0, */ /* .bmAttributes = 0, */ .wBytesPerInterval = cpu_to_le16(ECM_QC_STATUS_BYTECOUNT), }; static struct usb_endpoint_descriptor ecm_qc_ss_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = __constant_cpu_to_le16(1024), }; static struct usb_ss_ep_comp_descriptor ecm_qc_ss_in_comp_desc = { .bLength = sizeof(ecm_qc_ss_in_comp_desc), .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, /* the following 2 values can be tweaked if necessary */ /* .bMaxBurst = 0, */ /* .bmAttributes = 0, */ }; static struct usb_endpoint_descriptor ecm_qc_ss_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = __constant_cpu_to_le16(1024), }; static struct usb_ss_ep_comp_descriptor ecm_qc_ss_out_comp_desc = { .bLength = sizeof(ecm_qc_ss_out_comp_desc), .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, /* the following 2 values can be tweaked if necessary */ /* .bMaxBurst = 0, */ /* .bmAttributes = 0, */ }; static struct usb_descriptor_header *ecm_qc_ss_function[] = { /* CDC ECM control descriptors */ (struct usb_descriptor_header *) &ecm_qc_control_intf, (struct usb_descriptor_header *) &ecm_qc_header_desc, (struct usb_descriptor_header *) &ecm_qc_union_desc, (struct usb_descriptor_header *) &ecm_qc_desc, /* NOTE: status endpoint might need to be removed */ (struct usb_descriptor_header *) &ecm_qc_ss_notify_desc, (struct usb_descriptor_header *) &ecm_qc_ss_notify_comp_desc, /* data interface, altsettings 0 and 1 */ (struct usb_descriptor_header *) &ecm_qc_data_nop_intf, (struct usb_descriptor_header *) &ecm_qc_data_intf, (struct usb_descriptor_header *) &ecm_qc_ss_in_desc, (struct usb_descriptor_header *) &ecm_qc_ss_in_comp_desc, (struct usb_descriptor_header *) &ecm_qc_ss_out_desc, (struct usb_descriptor_header *) &ecm_qc_ss_out_comp_desc, NULL, }; /* string descriptors: */ static struct usb_string ecm_qc_string_defs[] = { [0].s = "CDC Ethernet Control Model (ECM)", [1].s = NULL /* DYNAMIC */, [2].s = "CDC Ethernet Data", { } /* end of list */ }; static struct usb_gadget_strings ecm_qc_string_table = { .language = 0x0409, /* en-us */ .strings = ecm_qc_string_defs, }; static struct usb_gadget_strings *ecm_qc_strings[] = { &ecm_qc_string_table, NULL, }; static void ecm_qc_do_notify(struct f_ecm_qc *ecm) { struct usb_request *req = ecm->notify_req; struct usb_cdc_notification *event; struct usb_composite_dev *cdev = ecm->port.func.config->cdev; __le32 *data; int status; /* notification already in flight? */ if (!req) return; event = req->buf; switch (ecm->notify_state) { case ECM_QC_NOTIFY_NONE: return; case ECM_QC_NOTIFY_CONNECT: event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION; if (ecm->is_open) { event->wValue = cpu_to_le16(1); ecm->notify_state = ECM_QC_NOTIFY_SPEED; } else { event->wValue = cpu_to_le16(0); ecm->notify_state = ECM_QC_NOTIFY_NONE; } event->wLength = 0; req->length = sizeof *event; DBG(cdev, "notify connect %s\n", ecm->is_open ? "true" : "false"); break; case ECM_QC_NOTIFY_SPEED: event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE; event->wValue = cpu_to_le16(0); event->wLength = cpu_to_le16(8); req->length = ECM_QC_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ecm_qc_bitrate(cdev->gadget)); data[1] = data[0]; DBG(cdev, "notify speed %d\n", ecm_qc_bitrate(cdev->gadget)); ecm->notify_state = ECM_QC_NOTIFY_NONE; break; } event->bmRequestType = 0xA1; event->wIndex = cpu_to_le16(ecm->ctrl_id); ecm->notify_req = NULL; status = usb_ep_queue(ecm->notify, req, GFP_ATOMIC); if (status < 0) { ecm->notify_req = req; DBG(cdev, "notify --> %d\n", status); } } static void ecm_qc_notify(struct f_ecm_qc *ecm) { /* NOTE on most versions of Linux, host side cdc-ethernet * won't listen for notifications until its netdevice opens. * The first notification then sits in the FIFO for a long * time, and the second one is queued. */ ecm->notify_state = ECM_QC_NOTIFY_CONNECT; ecm_qc_do_notify(ecm); } void *ecm_qc_get_ipa_rx_cb(void) { return ipa_params.ecm_ipa_rx_dp_notify; } void *ecm_qc_get_ipa_tx_cb(void) { return ipa_params.ecm_ipa_tx_dp_notify; } void *ecm_qc_get_ipa_priv(void) { return ipa_params.private; } bool ecm_qc_get_skip_ep_config(void) { return ipa_params.skip_ep_cfg; } /*-------------------------------------------------------------------------*/ static void ecm_qc_notify_complete(struct usb_ep *ep, struct usb_request *req) { struct f_ecm_qc *ecm = req->context; struct usb_composite_dev *cdev = ecm->port.func.config->cdev; struct usb_cdc_notification *event = req->buf; switch (req->status) { case 0: /* no fault */ break; case -ECONNRESET: case -ESHUTDOWN: ecm->notify_state = ECM_QC_NOTIFY_NONE; break; default: DBG(cdev, "event %02x --> %d\n", event->bNotificationType, req->status); break; } ecm->notify_req = req; ecm_qc_do_notify(ecm); } static int ecm_qc_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) { struct f_ecm_qc *ecm = func_to_ecm_qc(f); struct usb_composite_dev *cdev = f->config->cdev; struct usb_request *req = cdev->req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); /* composite driver infrastructure handles everything except * CDC class messages; interface activation uses set_alt(). */ pr_debug("Enter\n"); switch ((ctrl->bRequestType << 8) | ctrl->bRequest) { case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) | USB_CDC_SET_ETHERNET_PACKET_FILTER: /* see 6.2.30: no data, wIndex = interface, * wValue = packet filter bitmap */ if (w_length != 0 || w_index != ecm->ctrl_id) goto invalid; DBG(cdev, "packet filter %02x\n", w_value); /* REVISIT locking of cdc_filter. This assumes the UDC * driver won't have a concurrent packet TX irq running on * another CPU; or that if it does, this write is atomic... */ ecm->port.cdc_filter = w_value; value = 0; break; /* and optionally: * case USB_CDC_SEND_ENCAPSULATED_COMMAND: * case USB_CDC_GET_ENCAPSULATED_RESPONSE: * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS: * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER: * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER: * case USB_CDC_GET_ETHERNET_STATISTIC: */ default: invalid: DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, w_value, w_index, w_length); } /* respond with data transfer or status phase? */ if (value >= 0) { DBG(cdev, "ecm req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, w_value, w_index, w_length); req->zero = 0; req->length = value; value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); if (value < 0) pr_err("ecm req %02x.%02x response err %d\n", ctrl->bRequestType, ctrl->bRequest, value); } /* device either stalls (value < 0) or reports success */ return value; } static int ecm_qc_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { struct f_ecm_qc *ecm = func_to_ecm_qc(f); struct usb_composite_dev *cdev = f->config->cdev; /* Control interface has only altsetting 0 */ if (intf == ecm->ctrl_id) { if (alt != 0) { pr_warning("fail, alt setting is not 0\n"); goto fail; } if (ecm->notify->driver_data) { VDBG(cdev, "reset ecm control %d\n", intf); usb_ep_disable(ecm->notify); } if (!(ecm->notify->desc)) { VDBG(cdev, "init ecm ctrl %d\n", intf); if (config_ep_by_speed(cdev->gadget, f, ecm->notify)) goto fail; } usb_ep_enable(ecm->notify); ecm->notify->driver_data = ecm; /* Data interface has two altsettings, 0 and 1 */ } else if (intf == ecm->data_id) { if (alt > 1) goto fail; if (ecm->data_interface_up == alt) return 0; if (!ecm->port.in_ep->desc || !ecm->port.out_ep->desc) { DBG(cdev, "init ecm\n"); __ecm->ecm_mdm_ready_trigger = false; if (config_ep_by_speed(cdev->gadget, f, ecm->port.in_ep) || config_ep_by_speed(cdev->gadget, f, ecm->port.out_ep)) { ecm->port.in_ep->desc = NULL; ecm->port.out_ep->desc = NULL; goto fail; } } if (alt == 0 && ecm->port.in_ep->driver_data) { DBG(cdev, "reset ecm\n"); __ecm->ecm_mdm_ready_trigger = false; /* ecm->port is needed for disconnecting the BAM data * path. Only after the BAM data path is disconnected, * we can disconnect the port from the network layer. */ bam_data_disconnect(&ecm->bam_port, USB_FUNC_ECM, ecm->port_num); if (ecm->xport != USB_GADGET_XPORT_BAM2BAM_IPA) { gether_qc_disconnect_name(&ecm->port, "ecm0"); } else if (ecm->data_interface_up && gadget_is_dwc3(cdev->gadget)) { if (msm_ep_unconfig(ecm->port.in_ep) || msm_ep_unconfig(ecm->port.out_ep)) { pr_err("%s: ep_unconfig failed\n", __func__); goto fail; } } } /* CDC Ethernet only sends data in non-default altsettings. * Changing altsettings resets filters, statistics, etc. */ if (alt == 1) { struct net_device *net; /* Enable zlps by default for ECM conformance; * override for musb_hdrc (avoids txdma ovhead). */ ecm->port.is_zlp_ok = !(gadget_is_musbhdrc(cdev->gadget) ); ecm->port.cdc_filter = DEFAULT_FILTER; DBG(cdev, "activate ecm\n"); if (ecm->xport != USB_GADGET_XPORT_BAM2BAM_IPA) { net = gether_qc_connect_name(&ecm->port, "ecm0", true); if (IS_ERR(net)) return PTR_ERR(net); } if (ecm->xport == USB_GADGET_XPORT_BAM2BAM_IPA && gadget_is_dwc3(cdev->gadget)) { if (msm_ep_config(ecm->port.in_ep) || msm_ep_config(ecm->port.out_ep)) { pr_err("%s: ep_config failed\n", __func__); goto fail; } } ecm->bam_port.cdev = cdev; ecm->bam_port.func = &ecm->port.func; ecm->bam_port.in = ecm->port.in_ep; ecm->bam_port.out = ecm->port.out_ep; if (bam_data_connect(&ecm->bam_port, ecm->xport, ecm->port_num, USB_FUNC_ECM)) goto fail; } ecm->data_interface_up = alt; /* NOTE this can be a minor disagreement with the ECM spec, * which says speed notifications will "always" follow * connection notifications. But we allow one connect to * follow another (if the first is in flight), and instead * just guarantee that a speed notification is always sent. */ ecm_qc_notify(ecm); } else goto fail; return 0; fail: return -EINVAL; } /* Because the data interface supports multiple altsettings, * this ECM function *MUST* implement a get_alt() method. */ static int ecm_qc_get_alt(struct usb_function *f, unsigned intf) { struct f_ecm_qc *ecm = func_to_ecm_qc(f); if (intf == ecm->ctrl_id) return 0; return ecm->port.in_ep->driver_data ? 1 : 0; } static void ecm_qc_disable(struct usb_function *f) { struct f_ecm_qc *ecm = func_to_ecm_qc(f); struct usb_composite_dev *cdev = ecm->port.func.config->cdev; DBG(cdev, "ecm deactivated\n"); if (ecm->port.in_ep->driver_data) { bam_data_disconnect(&ecm->bam_port, USB_FUNC_ECM, ecm->port_num); if (ecm->xport != USB_GADGET_XPORT_BAM2BAM_IPA) gether_qc_disconnect_name(&ecm->port, "ecm0"); } else { /* release EPs incase no set_alt(1) yet */ ecm->port.in_ep->desc = NULL; ecm->port.out_ep->desc = NULL; } if (ecm->xport == USB_GADGET_XPORT_BAM2BAM_IPA && gadget_is_dwc3(cdev->gadget)) { msm_ep_unconfig(ecm->port.out_ep); msm_ep_unconfig(ecm->port.in_ep); } if (ecm->notify->driver_data) { usb_ep_disable(ecm->notify); ecm->notify->driver_data = NULL; ecm->notify->desc = NULL; } ecm->data_interface_up = false; } static void ecm_qc_suspend(struct usb_function *f) { struct f_ecm_qc *ecm = func_to_ecm_qc(f); bool remote_wakeup_allowed; /* Is DATA interface initialized? */ if (!ecm->data_interface_up) { pr_err("%s(): data interface not up\n", __func__); return; } if (f->config->cdev->gadget->speed == USB_SPEED_SUPER) remote_wakeup_allowed = f->func_wakeup_allowed; else remote_wakeup_allowed = f->config->cdev->gadget->remote_wakeup; pr_debug("%s(): remote_wakeup:%d\n:", __func__, remote_wakeup_allowed); if (!remote_wakeup_allowed) __ecm->ecm_mdm_ready_trigger = false; bam_data_suspend(&ecm->bam_port, ecm->port_num, USB_FUNC_ECM, remote_wakeup_allowed); pr_debug("ecm suspended\n"); } static void ecm_qc_resume(struct usb_function *f) { struct f_ecm_qc *ecm = func_to_ecm_qc(f); bool remote_wakeup_allowed; if (!ecm->data_interface_up) { pr_err("%s(): data interface was not up\n", __func__); return; } if (f->config->cdev->gadget->speed == USB_SPEED_SUPER) remote_wakeup_allowed = f->func_wakeup_allowed; else remote_wakeup_allowed = f->config->cdev->gadget->remote_wakeup; bam_data_resume(&ecm->bam_port, ecm->port_num, USB_FUNC_ECM, remote_wakeup_allowed); if (!remote_wakeup_allowed) { ecm->is_open = ecm->ecm_mdm_ready_trigger ? true : false; ecm_qc_notify(ecm); } pr_debug("ecm resumed\n"); } /*-------------------------------------------------------------------------*/ /* * Callbacks let us notify the host about connect/disconnect when the * net device is opened or closed. * * For testing, note that link states on this side include both opened * and closed variants of: * * - disconnected/unconfigured * - configured but inactive (data alt 0) * - configured and active (data alt 1) * * Each needs to be tested with unplug, rmmod, SET_CONFIGURATION, and * SET_INTERFACE (altsetting). Remember also that "configured" doesn't * imply the host is actually polling the notification endpoint, and * likewise that "active" doesn't imply it's actually using the data * endpoints for traffic. */ static void ecm_qc_open(struct qc_gether *geth) { struct f_ecm_qc *ecm = func_to_ecm_qc(&geth->func); DBG(ecm->port.func.config->cdev, "%s\n", __func__); ecm->is_open = true; ecm_qc_notify(ecm); } static void ecm_qc_close(struct qc_gether *geth) { struct f_ecm_qc *ecm = func_to_ecm_qc(&geth->func); DBG(ecm->port.func.config->cdev, "%s\n", __func__); ecm->is_open = false; ecm_qc_notify(ecm); } /* Callback to let ECM_IPA trigger us when network interface is up */ void ecm_mdm_ready(void) { struct f_ecm_qc *ecm = __ecm; int port_num; if (!ecm) { pr_err("can't set ecm_ready_trigger, no ecm instance\n"); return; } if (ecm->ecm_mdm_ready_trigger) { pr_err("already triggered - can't set ecm_ready_trigger\n"); return; } pr_debug("set ecm_ready_trigger\n"); ecm->ecm_mdm_ready_trigger = true; ecm->is_open = true; ecm_qc_notify(ecm); port_num = (u_bam_data_func_to_port(USB_FUNC_ECM, ECM_QC_ACTIVE_PORT)); if (port_num < 0) return; bam_data_start_rx_tx(port_num); } /*-------------------------------------------------------------------------*/ /* ethernet function driver setup/binding */ static int ecm_qc_bind(struct usb_configuration *c, struct usb_function *f) { struct usb_composite_dev *cdev = c->cdev; struct f_ecm_qc *ecm = func_to_ecm_qc(f); int status; struct usb_ep *ep; /* allocate instance-specific interface IDs */ status = usb_interface_id(c, f); if (status < 0) goto fail; ecm->ctrl_id = status; ecm_qc_control_intf.bInterfaceNumber = status; ecm_qc_union_desc.bMasterInterface0 = status; status = usb_interface_id(c, f); if (status < 0) { pr_debug("no more interface IDs can be allocated\n"); goto fail; } ecm->data_id = status; ecm_qc_data_nop_intf.bInterfaceNumber = status; ecm_qc_data_intf.bInterfaceNumber = status; ecm_qc_union_desc.bSlaveInterface0 = status; status = -ENODEV; /* allocate instance-specific endpoints */ ep = usb_ep_autoconfig(cdev->gadget, &ecm_qc_fs_in_desc); if (!ep) { pr_debug("can not allocate endpoint (fs_in)\n"); goto fail; } ecm->port.in_ep = ep; ep->driver_data = cdev; /* claim */ ep = usb_ep_autoconfig(cdev->gadget, &ecm_qc_fs_out_desc); if (!ep) { pr_debug("can not allocate endpoint (fs_out)\n"); goto fail; } ecm->port.out_ep = ep; ep->driver_data = cdev; /* claim */ /* NOTE: a status/notification endpoint is *OPTIONAL* but we * don't treat it that way. It's simpler, and some newer CDC * profiles (wireless handsets) no longer treat it as optional. */ ep = usb_ep_autoconfig(cdev->gadget, &ecm_qc_fs_notify_desc); if (!ep) { pr_debug("can not allocate endpoint (fs_notify)\n"); goto fail; } ecm->notify = ep; ep->driver_data = cdev; /* claim */ status = -ENOMEM; /* allocate notification request and buffer */ ecm->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL); if (!ecm->notify_req) { pr_debug("can not allocate notification request\n"); goto fail; } ecm->notify_req->buf = kmalloc(ECM_QC_STATUS_BYTECOUNT, GFP_KERNEL); if (!ecm->notify_req->buf) goto fail; ecm->notify_req->context = ecm; ecm->notify_req->complete = ecm_qc_notify_complete; /* copy descriptors, and track endpoint copies */ f->fs_descriptors = usb_copy_descriptors(ecm_qc_fs_function); if (!f->fs_descriptors) goto fail; /* support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ if (gadget_is_dualspeed(c->cdev->gadget)) { ecm_qc_hs_in_desc.bEndpointAddress = ecm_qc_fs_in_desc.bEndpointAddress; ecm_qc_hs_out_desc.bEndpointAddress = ecm_qc_fs_out_desc.bEndpointAddress; ecm_qc_hs_notify_desc.bEndpointAddress = ecm_qc_fs_notify_desc.bEndpointAddress; /* copy descriptors, and track endpoint copies */ f->hs_descriptors = usb_copy_descriptors(ecm_qc_hs_function); if (!f->hs_descriptors) goto fail; } if (gadget_is_superspeed(c->cdev->gadget)) { ecm_qc_ss_in_desc.bEndpointAddress = ecm_qc_fs_in_desc.bEndpointAddress; ecm_qc_ss_out_desc.bEndpointAddress = ecm_qc_fs_out_desc.bEndpointAddress; ecm_qc_ss_notify_desc.bEndpointAddress = ecm_qc_fs_notify_desc.bEndpointAddress; f->ss_descriptors = usb_copy_descriptors(ecm_qc_ss_function); if (!f->hs_descriptors) goto fail; } /* NOTE: all that is done without knowing or caring about * the network link ... which is unavailable to this code * until we're activated via set_alt(). */ ecm->port.open = ecm_qc_open; ecm->port.close = ecm_qc_close; DBG(cdev, "CDC Ethernet: %s speed IN/%s OUT/%s NOTIFY/%s\n", gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", ecm->port.in_ep->name, ecm->port.out_ep->name, ecm->notify->name); return 0; fail: if (f->ss_descriptors) usb_free_descriptors(f->ss_descriptors); if (f->hs_descriptors) usb_free_descriptors(f->hs_descriptors); if (f->fs_descriptors) usb_free_descriptors(f->fs_descriptors); if (ecm->notify_req) { kfree(ecm->notify_req->buf); usb_ep_free_request(ecm->notify, ecm->notify_req); } /* we might as well release our claims on endpoints */ if (ecm->notify) ecm->notify->driver_data = NULL; if (ecm->port.out_ep->desc) ecm->port.out_ep->driver_data = NULL; if (ecm->port.in_ep->desc) ecm->port.in_ep->driver_data = NULL; pr_err("%s: can't bind, err %d\n", f->name, status); return status; } static void ecm_qc_unbind(struct usb_configuration *c, struct usb_function *f) { struct f_ecm_qc *ecm = func_to_ecm_qc(f); DBG(c->cdev, "ecm unbind\n"); if (gadget_is_superspeed(c->cdev->gadget)) usb_free_descriptors(f->ss_descriptors); if (gadget_is_dualspeed(c->cdev->gadget)) usb_free_descriptors(f->hs_descriptors); usb_free_descriptors(f->fs_descriptors); kfree(ecm->notify_req->buf); usb_ep_free_request(ecm->notify, ecm->notify_req); ecm_qc_string_defs[1].s = NULL; if (ecm->xport == USB_GADGET_XPORT_BAM2BAM_IPA) { /* * call flush_workqueue to make sure that any pending * disconnect_work() from u_bam_data.c file is being * flushed before calling this rndis_ipa_cleanup API * as rndis ipa disconnect API is required to be * called before this. */ bam_data_flush_workqueue(); ecm_ipa_cleanup(ipa_params.private); } kfree(ecm); __ecm = NULL; } /** * ecm_qc_bind_config - add CDC Ethernet network link to a configuration * @c: the configuration to support the network link * @ethaddr: a buffer in which the ethernet address of the host side * side of the link was recorded * @xport_name: data path transport type name ("BAM2BAM" or "BAM2BAM_IPA") * Context: single threaded during gadget setup * * Returns zero on success, else negative errno. * * Caller must have called @gether_qc_setup(). Caller is also responsible * for calling @gether_cleanup() before module unload. */ int ecm_qc_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], char *xport_name) { struct f_ecm_qc *ecm; int status; if (!can_support_ecm(c->cdev->gadget) || !ethaddr) return -EINVAL; pr_debug("data transport type is %s\n", xport_name); /* maybe allocate device-global string IDs */ if (ecm_qc_string_defs[0].id == 0) { /* control interface label */ status = usb_string_id(c->cdev); if (status < 0) return status; ecm_qc_string_defs[0].id = status; ecm_qc_control_intf.iInterface = status; /* data interface label */ status = usb_string_id(c->cdev); if (status < 0) return status; ecm_qc_string_defs[2].id = status; ecm_qc_data_intf.iInterface = status; /* MAC address */ status = usb_string_id(c->cdev); if (status < 0) return status; ecm_qc_string_defs[1].id = status; ecm_qc_desc.iMACAddress = status; } /* allocate and initialize one new instance */ ecm = kzalloc(sizeof *ecm, GFP_KERNEL); if (!ecm) return -ENOMEM; __ecm = ecm; ecm->xport = str_to_xport(xport_name); pr_debug("set xport = %d\n", ecm->xport); /* export host's Ethernet address in CDC format */ if (ecm->xport == USB_GADGET_XPORT_BAM2BAM_IPA) { gether_qc_get_macs(ipa_params.device_ethaddr, ipa_params.host_ethaddr); snprintf(ecm->ethaddr, sizeof ecm->ethaddr, "%02X%02X%02X%02X%02X%02X", ipa_params.host_ethaddr[0], ipa_params.host_ethaddr[1], ipa_params.host_ethaddr[2], ipa_params.host_ethaddr[3], ipa_params.host_ethaddr[4], ipa_params.host_ethaddr[5]); ipa_params.device_ready_notify = ecm_mdm_ready; } else snprintf(ecm->ethaddr, sizeof ecm->ethaddr, "%02X%02X%02X%02X%02X%02X", ethaddr[0], ethaddr[1], ethaddr[2], ethaddr[3], ethaddr[4], ethaddr[5]); ecm_qc_string_defs[1].s = ecm->ethaddr; ecm->port.cdc_filter = DEFAULT_FILTER; ecm->port.func.name = "cdc_ethernet"; ecm->port.func.strings = ecm_qc_strings; /* descriptors are per-instance copies */ ecm->port.func.bind = ecm_qc_bind; ecm->port.func.unbind = ecm_qc_unbind; ecm->port.func.set_alt = ecm_qc_set_alt; ecm->port.func.get_alt = ecm_qc_get_alt; ecm->port.func.setup = ecm_qc_setup; ecm->port.func.disable = ecm_qc_disable; ecm->port.func.suspend = ecm_qc_suspend; ecm->port.func.resume = ecm_qc_resume; ecm->ecm_mdm_ready_trigger = false; status = usb_add_function(c, &ecm->port.func); if (status) { pr_err("failed to add function\n"); ecm_qc_string_defs[1].s = NULL; kfree(ecm); __ecm = NULL; return status; } if (ecm->xport != USB_GADGET_XPORT_BAM2BAM_IPA) return status; pr_debug("setting ecm_ipa, host_ethaddr=%pM, device_ethaddr=%pM", ipa_params.host_ethaddr, ipa_params.device_ethaddr); status = ecm_ipa_init(&ipa_params); if (status) { pr_err("failed to initialize ecm_ipa\n"); ecm_qc_string_defs[1].s = NULL; kfree(ecm); __ecm = NULL; } else { pr_debug("ecm_ipa successful created\n"); } return status; } static int ecm_qc_init(void) { int ret; pr_debug("initialize ecm qc port instance\n"); ret = bam_data_setup(USB_FUNC_ECM, ECM_QC_NO_PORTS); if (ret) { pr_err("bam_data_setup failed err: %d\n", ret); return ret; } return ret; }