/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #ifndef UFS_QCOM_H_ #define UFS_QCOM_H_ #include #include #include "ufshcd.h" #define MAX_UFS_QCOM_HOSTS 1 #define MAX_U32 (~(u32)0) #define MPHY_TX_FSM_STATE 0x41 #define TX_FSM_HIBERN8 0x1 #define HBRN8_POLL_TOUT_MS 100 #define DEFAULT_CLK_RATE_HZ 1000000 #define BUS_VECTOR_NAME_LEN 32 #define UFS_HW_VER_MAJOR_SHFT (28) #define UFS_HW_VER_MAJOR_MASK (0x000F << UFS_HW_VER_MAJOR_SHFT) #define UFS_HW_VER_MINOR_SHFT (16) #define UFS_HW_VER_MINOR_MASK (0x0FFF << UFS_HW_VER_MINOR_SHFT) #define UFS_HW_VER_STEP_SHFT (0) #define UFS_HW_VER_STEP_MASK (0xFFFF << UFS_HW_VER_STEP_SHFT) /* vendor specific pre-defined parameters */ #define SLOW 1 #define FAST 2 #define UFS_QCOM_LIMIT_NUM_LANES_RX 2 #define UFS_QCOM_LIMIT_NUM_LANES_TX 2 #define UFS_QCOM_LIMIT_HSGEAR_RX UFS_HS_G3 #define UFS_QCOM_LIMIT_HSGEAR_TX UFS_HS_G3 #define UFS_QCOM_LIMIT_PWMGEAR_RX UFS_PWM_G4 #define UFS_QCOM_LIMIT_PWMGEAR_TX UFS_PWM_G4 #define UFS_QCOM_LIMIT_RX_PWR_PWM SLOW_MODE #define UFS_QCOM_LIMIT_TX_PWR_PWM SLOW_MODE #define UFS_QCOM_LIMIT_RX_PWR_HS FAST_MODE #define UFS_QCOM_LIMIT_TX_PWR_HS FAST_MODE #define UFS_QCOM_LIMIT_HS_RATE PA_HS_MODE_B #define UFS_QCOM_LIMIT_DESIRED_MODE FAST /* QCOM UFS host controller vendor specific registers */ enum { REG_UFS_SYS1CLK_1US = 0xC0, REG_UFS_TX_SYMBOL_CLK_NS_US = 0xC4, REG_UFS_LOCAL_PORT_ID_REG = 0xC8, REG_UFS_PA_ERR_CODE = 0xCC, REG_UFS_RETRY_TIMER_REG = 0xD0, REG_UFS_PA_LINK_STARTUP_TIMER = 0xD8, REG_UFS_CFG1 = 0xDC, REG_UFS_CFG2 = 0xE0, REG_UFS_HW_VERSION = 0xE4, UFS_TEST_BUS = 0xE8, UFS_TEST_BUS_CTRL_0 = 0xEC, UFS_TEST_BUS_CTRL_1 = 0xF0, UFS_TEST_BUS_CTRL_2 = 0xF4, UFS_UNIPRO_CFG = 0xF8, /* * QCOM UFS host controller vendor specific registers * added in HW Version 3.0.0 */ UFS_AH8_CFG = 0xFC, }; /* QCOM UFS host controller vendor specific debug registers */ enum { UFS_DBG_RD_REG_UAWM = 0x100, UFS_DBG_RD_REG_UARM = 0x200, UFS_DBG_RD_REG_TXUC = 0x300, UFS_DBG_RD_REG_RXUC = 0x400, UFS_DBG_RD_REG_DFC = 0x500, UFS_DBG_RD_REG_TRLUT = 0x600, UFS_DBG_RD_REG_TMRLUT = 0x700, UFS_UFS_DBG_RD_REG_OCSC = 0x800, UFS_UFS_DBG_RD_DESC_RAM = 0x1500, UFS_UFS_DBG_RD_PRDT_RAM = 0x1700, UFS_UFS_DBG_RD_RESP_RAM = 0x1800, UFS_UFS_DBG_RD_EDTL_RAM = 0x1900, }; #define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x) (0x000 + x) #define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x) (0x400 + x) /* bit definitions for REG_UFS_CFG1 register */ #define QUNIPRO_SEL UFS_BIT(0) #define TEST_BUS_EN BIT(18) #define TEST_BUS_SEL GENMASK(22, 19) /* bit definitions for REG_UFS_CFG2 register */ #define UAWM_HW_CGC_EN (1 << 0) #define UARM_HW_CGC_EN (1 << 1) #define TXUC_HW_CGC_EN (1 << 2) #define RXUC_HW_CGC_EN (1 << 3) #define DFC_HW_CGC_EN (1 << 4) #define TRLUT_HW_CGC_EN (1 << 5) #define TMRLUT_HW_CGC_EN (1 << 6) #define OCSC_HW_CGC_EN (1 << 7) /* bit definition for UFS_UFS_TEST_BUS_CTRL_n */ #define TEST_BUS_SUB_SEL_MASK 0x1F /* All XXX_SEL fields are 5 bits wide */ #define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\ TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\ DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\ TMRLUT_HW_CGC_EN | OCSC_HW_CGC_EN) /* bit offset */ enum { OFFSET_UFS_PHY_SOFT_RESET = 1, OFFSET_CLK_NS_REG = 10, }; /* bit masks */ enum { MASK_UFS_PHY_SOFT_RESET = 0x2, MASK_TX_SYMBOL_CLK_1US_REG = 0x3FF, MASK_CLK_NS_REG = 0xFFFC00, }; enum ufs_qcom_phy_init_type { UFS_PHY_INIT_FULL, UFS_PHY_INIT_CFG_RESTORE, }; /* QCOM UFS debug print bit mask */ #define UFS_QCOM_DBG_PRINT_REGS_EN BIT(0) #define UFS_QCOM_DBG_PRINT_ICE_REGS_EN BIT(1) #define UFS_QCOM_DBG_PRINT_TEST_BUS_EN BIT(2) #define UFS_QCOM_DBG_PRINT_ALL \ (UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_ICE_REGS_EN | \ UFS_QCOM_DBG_PRINT_TEST_BUS_EN) /* QUniPro Vendor specific attributes */ #define PA_VS_CONFIG_REG1 0x9000 #define DME_VS_CORE_CLK_CTRL 0xD002 /* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */ #define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT BIT(8) #define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK 0xFF static inline void ufs_qcom_get_controller_revision(struct ufs_hba *hba, u8 *major, u16 *minor, u16 *step) { u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION); *major = (ver & UFS_HW_VER_MAJOR_MASK) >> UFS_HW_VER_MAJOR_SHFT; *minor = (ver & UFS_HW_VER_MINOR_MASK) >> UFS_HW_VER_MINOR_SHFT; *step = (ver & UFS_HW_VER_STEP_MASK) >> UFS_HW_VER_STEP_SHFT; }; static inline void ufs_qcom_assert_reset(struct ufs_hba *hba) { ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET, 1 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1); /* * make sure that this configuration is applied before * we continue */ mb(); } static inline void ufs_qcom_deassert_reset(struct ufs_hba *hba) { ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET, 0 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1); /* * make sure that this configuration is applied before * we continue */ mb(); } struct ufs_qcom_bus_vote { uint32_t client_handle; uint32_t curr_vote; int min_bw_vote; int max_bw_vote; int saved_vote; bool is_max_bw_needed; struct device_attribute max_bus_bw; }; /** * struct ufs_qcom_ice_data - ICE related information * @vops: pointer to variant operations of ICE * @async_done: completion for supporting ICE's driver asynchronous nature * @pdev: pointer to the proper ICE platform device * @state: UFS-ICE interface's internal state (see * ufs-qcom-ice.h for possible internal states) * @quirks: UFS-ICE interface related quirks * @crypto_engine_err: crypto engine errors */ struct ufs_qcom_ice_data { struct qcom_ice_variant_ops *vops; struct platform_device *pdev; int state; u16 quirks; bool crypto_engine_err; }; /* Host controller hardware version: major.minor.step */ struct ufs_hw_version { u16 step; u16 minor; u8 major; }; #ifdef CONFIG_DEBUG_FS struct qcom_debugfs_files { struct dentry *debugfs_root; struct dentry *dbg_print_en; struct dentry *testbus; struct dentry *testbus_en; struct dentry *testbus_cfg; struct dentry *testbus_bus; struct dentry *dbg_regs; struct dentry *pm_qos; }; #endif struct ufs_qcom_testbus { u8 select_major; u8 select_minor; }; /* PM QoS voting state */ enum ufs_qcom_pm_qos_state { PM_QOS_UNVOTED, PM_QOS_VOTED, PM_QOS_REQ_VOTE, PM_QOS_REQ_UNVOTE, }; /** * struct ufs_qcom_pm_qos_cpu_group - data related to cluster PM QoS voting * logic * @req: request object for PM QoS * @vote_work: work object for voting procedure * @unvote_work: work object for un-voting procedure * @host: back pointer to the main structure * @state: voting state machine current state * @latency_us: requested latency value used for cluster voting, in * microseconds * @mask: cpu mask defined for this cluster * @active_reqs: number of active requests on this cluster */ struct ufs_qcom_pm_qos_cpu_group { struct pm_qos_request req; struct work_struct vote_work; struct work_struct unvote_work; struct ufs_qcom_host *host; enum ufs_qcom_pm_qos_state state; s32 latency_us; cpumask_t mask; int active_reqs; }; /** * struct ufs_qcom_pm_qos - data related to PM QoS voting logic * @groups: PM QoS cpu group state array * @enable_attr: sysfs attribute to enable/disable PM QoS voting logic * @latency_attr: sysfs attribute to set latency value * @workq: single threaded workqueue to run PM QoS voting/unvoting * @num_clusters: number of clusters defined * @default_cpu: cpu to use for voting for request not specifying a cpu * @is_enabled: flag specifying whether voting logic is enabled */ struct ufs_qcom_pm_qos { struct ufs_qcom_pm_qos_cpu_group *groups; struct device_attribute enable_attr; struct device_attribute latency_attr; struct workqueue_struct *workq; int num_groups; int default_cpu; bool is_enabled; }; struct ufs_qcom_host { /* * Set this capability if host controller supports the QUniPro mode * and if driver wants the Host controller to operate in QUniPro mode. * Note: By default this capability will be kept enabled if host * controller supports the QUniPro mode. */ #define UFS_QCOM_CAP_QUNIPRO UFS_BIT(0) /* * Set this capability if host controller can retain the secure * configuration even after UFS controller core power collapse. */ #define UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE UFS_BIT(1) u32 caps; struct phy *generic_phy; struct ufs_hba *hba; struct ufs_qcom_bus_vote bus_vote; struct ufs_pa_layer_attr dev_req_params; struct clk *rx_l0_sync_clk; struct clk *tx_l0_sync_clk; struct clk *rx_l1_sync_clk; struct clk *tx_l1_sync_clk; /* PM Quality-of-Service (QoS) data */ struct ufs_qcom_pm_qos pm_qos; bool is_lane_clks_enabled; bool sec_cfg_updated; struct ufs_qcom_ice_data ice; void __iomem *dev_ref_clk_ctrl_mmio; bool is_dev_ref_clk_enabled; struct ufs_hw_version hw_ver; u32 dev_ref_clk_en_mask; #ifdef CONFIG_DEBUG_FS struct qcom_debugfs_files debugfs_files; #endif /* Bitmask for enabling debug prints */ u32 dbg_print_en; struct ufs_qcom_testbus testbus; }; static inline u32 ufs_qcom_get_debug_reg_offset(struct ufs_qcom_host *host, u32 reg) { if (host->hw_ver.major <= 0x02) return UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(reg); return UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(reg); }; #define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba) #define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba) #define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba) int ufs_qcom_testbus_config(struct ufs_qcom_host *host); void ufs_qcom_print_hw_debug_reg_all(struct ufs_hba *hba, void *priv, void (*print_fn)(struct ufs_hba *hba, int offset, int num_regs, char *str, void *priv)); static inline bool ufs_qcom_cap_qunipro(struct ufs_qcom_host *host) { if (host->caps & UFS_QCOM_CAP_QUNIPRO) return true; else return false; } #endif /* UFS_QCOM_H_ */