/*
 * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "msm8937-pinctrl.dtsi"
#include "msm8937-camera-sensor-qrd.dtsi"

&soc {
	gpio_keys {
		compatible = "gpio-keys";
		input-name = "gpio-keys";
		pinctrl-names = "tlmm_gpio_key_active","tlmm_gpio_key_suspend";
		pinctrl-0 = <&gpio_key_active>;
		pinctrl-1 = <&gpio_key_suspend>;

		vol_up {
			label = "volume_up";
			gpios = <&tlmm 91 0x1>;
			linux,input-type = <1>;
			linux,code = <115>;
			debounce-interval = <15>;
		};
	};
};

&int_codec {
	status = "okay";
	qcom,msm-mbhc-hphl-swh = <1>;
	qcom,msm-gpios =
		"pri_i2s";
	qcom,pinctrl-names =
		"all_off",
		"pri_i2s_act";
	pinctrl-names =
		"all_off",
		"pri_i2s_act";
	pinctrl-0 = <&cdc_pdm_lines_sus &cdc_pdm_lines_2_sus>;
	pinctrl-1 = <&cdc_pdm_lines_act &cdc_pdm_lines_2_act>;
	qcom,cdc-us-euro-gpios;
	qcom,msm-hs-micbias-type = "internal";
	qcom,audio-routing =
		"RX_BIAS", "MCLK",
		"SPK_RX_BIAS", "MCLK",
		"INT_LDO_H", "MCLK",
		"MIC BIAS External", "Handset Mic",
		"MIC BIAS Internal2", "Headset Mic",
		"MIC BIAS External", "Secondary Mic",
		"AMIC1", "MIC BIAS External",
		"AMIC2", "MIC BIAS Internal2",
		"AMIC3", "MIC BIAS External";
};


&pm8937_cajon_dig {
	status = "okay";
};

&pm8937_cajon_analog {
	status = "okay";
};

&blsp1_uart2 {
	status = "ok";
	pinctrl-names = "default";
	pinctrl-0 = <&uart_console_active>;
};

&sdhc_1 {
	/* device core power supply */
	vdd-supply = <&pm8937_l8>;
	qcom,vdd-voltage-level = <2900000 2900000>;
	qcom,vdd-current-level = <200 570000>;

	/* device communication power supply */
	vdd-io-supply = <&pm8937_l5>;
	qcom,vdd-io-always-on;
	qcom,vdd-io-lpm-sup;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <200 325000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;

	qcom,clk-rates = <400000 20000000 25000000 50000000 192000000
								384000000>;
	qcom,nonremovable;
	qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";

	status = "ok";
};

&sdhc_2 {
	/* device core power supply */
	vdd-supply = <&pm8937_l11>;
	qcom,vdd-voltage-level = <2950000 2950000>;
	qcom,vdd-current-level = <15000 800000>;

	/* device communication power supply */
	vdd-io-supply = <&pm8937_l12>;
	qcom,vdd-io-voltage-level = <1800000 2950000>;
	qcom,vdd-io-current-level = <200 22000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;

	#address-cells = <0>;
	interrupt-parent = <&sdhc_2>;
	interrupts = <0 1 2>;
	#interrupt-cells = <1>;
	interrupt-map-mask = <0xffffffff>;
	interrupt-map = <0 &intc 0 125 0
		1 &intc 0 221 0
		2 &tlmm 67 0>;
	interrupt-names = "hc_irq", "pwr_irq", "status_irq";
	cd-gpios = <&tlmm 67 0x1>;

	qcom,clk-rates = <400000 20000000 25000000 50000000 100000000
								200000000>;
	qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";

	status = "ok";
};

&i2c_5 { /* BLSP2 QUP1 */
	nq@28 {
		compatible = "qcom,nq-nci";
		reg = <0x28>;
		qcom,nq-irq = <&tlmm 17 0x00>;
		qcom,nq-ven = <&tlmm 16 0x00>;
		qcom,nq-firm = <&tlmm 130 0x00>;
		qcom,nq-clkreq = <&pm8937_gpios 5 0x00>;
		interrupt-parent = <&tlmm>;
		qcom,clk-src = "BBCLK2";
		interrupts = <17 0>;
		interrupt-names = "nfc_irq";
		pinctrl-names = "nfc_active", "nfc_suspend";
		pinctrl-0 = <&nfc_int_active &nfc_disable_active>;
		pinctrl-1 = <&nfc_int_suspend &nfc_disable_suspend>;
		clocks = <&clock_gcc clk_bb_clk2_pin>;
		clock-names = "ref_clk";
	};
};

&pm8937_gpios {
	gpio@c400 {
		qcom,mode = <0>;
		qcom,output-type = <0>;
		qcom,pull = <0>;
		qcom,vin-sel = <2>;
		qcom,out-strength = <3>;
		qcom,src-sel = <0>;
		qcom,master-en = <1>;
		status = "okay";
	};
};

&pm8937_vadc {
	/delete-node/ chan@11;
};