/* * ci13xxx_udc.h - structures, registers, and macros MIPS USB IP core * * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. * * Author: David Lopo * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Description: MIPS USB IP core family device controller * Structures, registers and logging macros */ #ifndef _CI13XXX_h_ #define _CI13XXX_h_ /****************************************************************************** * DEFINE *****************************************************************************/ #define CI13XXX_PAGE_SIZE 4096ul /* page size for TD's */ #define ENDPT_MAX (32) #define CTRL_PAYLOAD_MAX (64) #define RX (0) /* similar to USB_DIR_OUT but can be used as an index */ #define TX (1) /* similar to USB_DIR_IN but can be used as an index */ /* UDC private data: * 16MSb - Vendor ID | 16 LSb Vendor private data */ #define CI13XX_REQ_VENDOR_ID(id) (id & 0xFFFF0000UL) #define MSM_ETD_TYPE BIT(1) #define MSM_EP_PIPE_ID_RESET_VAL 0x1F001F /****************************************************************************** * STRUCTURES *****************************************************************************/ /* DMA layout of transfer descriptors */ struct ci13xxx_td { /* 0 */ u32 next; #define TD_TERMINATE BIT(0) #define TD_ADDR_MASK (0xFFFFFFEUL << 5) /* 1 */ u32 token; #define TD_STATUS (0x00FFUL << 0) #define TD_STATUS_TR_ERR BIT(3) #define TD_STATUS_DT_ERR BIT(5) #define TD_STATUS_HALTED BIT(6) #define TD_STATUS_ACTIVE BIT(7) #define TD_MULTO (0x0003UL << 10) #define TD_IOC BIT(15) #define TD_TOTAL_BYTES (0x7FFFUL << 16) /* 2 */ u32 page[5]; #define TD_CURR_OFFSET (0x0FFFUL << 0) #define TD_FRAME_NUM (0x07FFUL << 0) #define TD_RESERVED_MASK (0x0FFFUL << 0) } __attribute__ ((packed, aligned(4))); /* DMA layout of queue heads */ struct ci13xxx_qh { /* 0 */ u32 cap; #define QH_IOS BIT(15) #define QH_MAX_PKT (0x07FFUL << 16) #define QH_ZLT BIT(29) #define QH_MULT (0x0003UL << 30) #define QH_MULT_SHIFT 11 /* 1 */ u32 curr; /* 2 - 8 */ struct ci13xxx_td td; /* 9 */ u32 RESERVED; struct usb_ctrlrequest setup; } __attribute__ ((packed, aligned(4))); /* cache of larger request's original attributes */ struct ci13xxx_multi_req { unsigned len; unsigned actual; void *buf; }; /* Extension of usb_request */ struct ci13xxx_req { struct usb_request req; unsigned map; struct list_head queue; struct ci13xxx_td *ptr; dma_addr_t dma; struct ci13xxx_td *zptr; dma_addr_t zdma; struct ci13xxx_multi_req multi; }; /* Extension of usb_ep */ struct ci13xxx_ep { struct usb_ep ep; const struct usb_endpoint_descriptor *desc; u8 dir; u8 num; u8 type; char name[16]; struct { struct list_head queue; struct ci13xxx_qh *ptr; dma_addr_t dma; } qh; struct list_head rw_queue; int wedge; /* global resources */ spinlock_t *lock; struct device *device; struct dma_pool *td_pool; struct ci13xxx_td *last_zptr; dma_addr_t last_zdma; unsigned long dTD_update_fail_count; unsigned long prime_fail_count; int prime_timer_count; struct timer_list prime_timer; bool multi_req; }; struct ci13xxx; struct ci13xxx_udc_driver { const char *name; unsigned long flags; unsigned int nz_itc; #define CI13XXX_REGS_SHARED BIT(0) #define CI13XXX_REQUIRE_TRANSCEIVER BIT(1) #define CI13XXX_PULLUP_ON_VBUS BIT(2) #define CI13XXX_DISABLE_STREAMING BIT(3) #define CI13XXX_ZERO_ITC BIT(4) #define CI13XXX_IS_OTG BIT(5) #define CI13XXX_CONTROLLER_RESET_EVENT 0 #define CI13XXX_CONTROLLER_CONNECT_EVENT 1 #define CI13XXX_CONTROLLER_SUSPEND_EVENT 2 #define CI13XXX_CONTROLLER_REMOTE_WAKEUP_EVENT 3 #define CI13XXX_CONTROLLER_RESUME_EVENT 4 #define CI13XXX_CONTROLLER_DISCONNECT_EVENT 5 #define CI13XXX_CONTROLLER_UDC_STARTED_EVENT 6 void (*notify_event) (struct ci13xxx *udc, unsigned event); bool (*in_lpm) (struct ci13xxx *udc); void (*set_fpr_flag) (struct ci13xxx *udc); }; /* CI13XXX UDC descriptor & global resources */ struct ci13xxx { spinlock_t *lock; /* ctrl register bank access */ void __iomem *regs; /* registers address space */ struct dma_pool *qh_pool; /* DMA pool for queue heads */ struct dma_pool *td_pool; /* DMA pool for transfer descs */ struct usb_request *status; /* ep0 status request */ void *status_buf;/* GET_STATUS buffer */ struct usb_gadget gadget; /* USB slave device */ struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX]; /* extended endpts */ u32 ep0_dir; /* ep0 direction */ #define ep0out ci13xxx_ep[0] #define ep0in ci13xxx_ep[hw_ep_max / 2] u8 suspended; /* suspended by the host */ u8 configured; /* is device configured */ u8 test_mode; /* the selected test mode */ bool rw_pending; /* Remote wakeup pending flag */ struct delayed_work rw_work; /* remote wakeup delayed work */ struct usb_gadget_driver *driver; /* 3rd party gadget driver */ struct ci13xxx_udc_driver *udc_driver; /* device controller driver */ int vbus_active; /* is VBUS active */ int softconnect; /* is pull-up enable allowed */ unsigned long dTD_update_fail_count; struct usb_phy *transceiver; /* Transceiver struct */ bool skip_flush; /* skip flushing remaining EP upon flush timeout for the first EP. */ }; /****************************************************************************** * REGISTERS *****************************************************************************/ /* register size */ #define REG_BITS (32) /* HCCPARAMS */ #define HCCPARAMS_LEN BIT(17) /* DCCPARAMS */ #define DCCPARAMS_DEN (0x1F << 0) #define DCCPARAMS_DC BIT(7) /* TESTMODE */ #define TESTMODE_FORCE BIT(0) /* USBCMD */ #define USBCMD_RS BIT(0) #define USBCMD_RST BIT(1) #define USBCMD_SUTW BIT(13) #define USBCMD_ATDTW BIT(14) /* USBSTS & USBINTR */ #define USBi_UI BIT(0) #define USBi_UEI BIT(1) #define USBi_PCI BIT(2) #define USBi_URI BIT(6) #define USBi_SLI BIT(8) /* DEVICEADDR */ #define DEVICEADDR_USBADRA BIT(24) #define DEVICEADDR_USBADR (0x7FUL << 25) /* PORTSC */ #define PORTSC_FPR BIT(6) #define PORTSC_SUSP BIT(7) #define PORTSC_HSP BIT(9) #define PORTSC_PTC (0x0FUL << 16) /* DEVLC */ #define DEVLC_PSPD (0x03UL << 25) #define DEVLC_PSPD_HS (0x02UL << 25) /* USBMODE */ #define USBMODE_CM (0x03UL << 0) #define USBMODE_CM_IDLE (0x00UL << 0) #define USBMODE_CM_DEVICE (0x02UL << 0) #define USBMODE_CM_HOST (0x03UL << 0) #define USBMODE_SLOM BIT(3) #define USBMODE_SDIS BIT(4) #define USBCMD_ITC(n) (n << 16) /* n = 0, 1, 2, 4, 8, 16, 32, 64 */ #define USBCMD_ITC_MASK (0xFF << 16) /* ENDPTCTRL */ #define ENDPTCTRL_RXS BIT(0) #define ENDPTCTRL_RXT (0x03UL << 2) #define ENDPTCTRL_RXR BIT(6) /* reserved for port 0 */ #define ENDPTCTRL_RXE BIT(7) #define ENDPTCTRL_TXS BIT(16) #define ENDPTCTRL_TXT (0x03UL << 18) #define ENDPTCTRL_TXR BIT(22) /* reserved for port 0 */ #define ENDPTCTRL_TXE BIT(23) /****************************************************************************** * LOGGING *****************************************************************************/ #define ci13xxx_printk(level, format, args...) \ do { \ if (_udc == NULL) \ printk(level "[%s] " format "\n", __func__, ## args); \ else \ dev_printk(level, _udc->gadget.dev.parent, \ "[%s] " format "\n", __func__, ## args); \ } while (0) #ifndef err #define err(format, args...) ci13xxx_printk(KERN_ERR, format, ## args) #endif #define warn(format, args...) ci13xxx_printk(KERN_WARNING, format, ## args) #define info(format, args...) ci13xxx_printk(KERN_INFO, format, ## args) #ifdef TRACE #define trace(format, args...) ci13xxx_printk(KERN_DEBUG, format, ## args) #define dbg_trace(format, args...) dev_dbg(dev, format, ##args) #else #define trace(format, args...) do {} while (0) #define dbg_trace(format, args...) do {} while (0) #endif #endif /* _CI13XXX_h_ */