synopsys DWC3 CORE

DWC3- USB3 CONTROLLER

Required properties:
 - compatible: must be "synopsys,dwc3"
 - reg : Address and length of the register set for the device
 - interrupts: Interrupts used by the dwc3 controller.
 - interrupt-names : Required interrupt resource entries are:
	"irq" : Interrupt for DWC3 core
	"otg_irq" : Interrupt for DWC3 core's OTG Events

Optional properties:
 - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
 - host-only-mode: if present then dwc3 should be run in HOST only mode.

This is usually a subnode to DWC3 glue to which it is connected.

dwc3@4a030000 {
	compatible = "synopsys,dwc3";
	reg = <0x4a030000 0xcfff>;
	interrupts = <0 92 4>, <0 179 0>;
	interrupt-names = "irq", "otg_irq";
	tx-fifo-resize;
};