/* ehci-msm.c - HSUSB Host Controller Driver Implementation * * Copyright (c) 2008-2015, The Linux Foundation. All rights reserved. * * Partly derived from ehci-fsl.c and ehci-hcd.c * Copyright (c) 2000-2004 by David Brownell * Copyright (c) 2005 MontaVista Software * * All source code in this file is licensed under the following license except * where indicated. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * * See the GNU General Public License for more details. * You should have received a copy of the GNU General Public License * along with this program; if not, you can find it at http://www.fsf.org */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ehci.h" #define MSM_USB_BASE (hcd->regs) #define DRIVER_DESC "Qualcomm On-Chip EHCI Host Controller" static const char hcd_name[] = "ehci-msm"; static struct hc_driver __read_mostly msm_hc_driver; static int ehci_msm_reset(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; ehci->caps = USB_CAPLENGTH; hcd->has_tt = 1; ehci->no_testmode_suspend = true; retval = ehci_setup(hcd); if (retval) return retval; /* bursts of unspecified length. */ writel_relaxed(0, USB_AHBBURST); /* Use the AHB transactor */ writel_relaxed(0x08, USB_AHBMODE); /* Disable streaming mode and select host mode */ writel_relaxed(0x13, USB_USBMODE); if (hcd->usb_phy->flags & ENABLE_SECONDARY_PHY) { ehci_dbg(ehci, "using secondary hsphy\n"); writel_relaxed(readl_relaxed(USB_PHY_CTRL2) | (1<<16), USB_PHY_CTRL2); } /* Disable ULPI_TX_PKT_EN_CLR_FIX which is valid only for HSIC */ writel_relaxed(readl_relaxed(USB_GENCONFIG2) & ~(1<<19), USB_GENCONFIG2); return 0; } static u64 msm_ehci_dma_mask = DMA_BIT_MASK(32); static int ehci_msm_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct resource *res; struct usb_phy *phy; int ret; dev_dbg(&pdev->dev, "ehci_msm proble\n"); if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &msm_ehci_dma_mask; if (!pdev->dev.coherent_dma_mask) pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { dev_err(&pdev->dev, "Unable to create HCD\n"); return -ENOMEM; } hcd_to_bus(hcd)->skip_resume = true; hcd->irq = platform_get_irq(pdev, 0); if (hcd->irq < 0) { dev_err(&pdev->dev, "Unable to get IRQ resource\n"); ret = hcd->irq; goto put_hcd; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "Unable to get memory resource\n"); ret = -ENODEV; goto put_hcd; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { dev_err(&pdev->dev, "ioremap failed\n"); ret = PTR_ERR(hcd->regs); goto put_hcd; } /* * OTG driver takes care of PHY initialization, clock management, * powering up VBUS, mapping of registers address space and power * management. */ if (pdev->dev.of_node) phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); else phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(phy)) { dev_err(&pdev->dev, "unable to find transceiver\n"); ret = -EPROBE_DEFER; goto put_hcd; } ret = otg_set_host(phy->otg, &hcd->self); if (ret < 0) { dev_err(&pdev->dev, "unable to register with transceiver\n"); goto put_hcd; } hcd->usb_phy = phy; device_init_wakeup(&pdev->dev, 1); pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); msm_bam_set_usb_host_dev(&pdev->dev); return 0; put_hcd: usb_put_hcd(hcd); return ret; } static int ehci_msm_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); device_init_wakeup(&pdev->dev, 0); pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); otg_set_host(hcd->usb_phy->otg, NULL); hcd->usb_phy = NULL; /* FIXME: need to call usb_remove_hcd() here? */ usb_put_hcd(hcd); return 0; } #ifdef CONFIG_PM_RUNTIME static int ehci_msm_runtime_suspend(struct device *dev) { dev_dbg(dev, "ehci runtime suspend\n"); return 0; } static int ehci_msm_runtime_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); u32 portsc; dev_dbg(dev, "ehci runtime resume\n"); portsc = readl_relaxed(USB_PORTSC); portsc &= ~PORT_RWC_BITS; portsc |= PORT_RESUME; writel_relaxed(portsc, USB_PORTSC); return 0; } #endif static const struct dev_pm_ops ehci_msm_dev_pm_ops = { SET_RUNTIME_PM_OPS(ehci_msm_runtime_suspend, ehci_msm_runtime_resume, NULL) }; static const struct of_device_id msm_ehci_dt_match[] = { { .compatible = "qcom,ehci-host", }, {} }; MODULE_DEVICE_TABLE(of, msm_ehci_dt_match); static struct platform_driver ehci_msm_driver = { .probe = ehci_msm_probe, .remove = ehci_msm_remove, .driver = { .name = "msm_hsusb_host", .pm = &ehci_msm_dev_pm_ops, .of_match_table = msm_ehci_dt_match, }, }; static const struct ehci_driver_overrides msm_overrides __initconst = { .reset = ehci_msm_reset, }; static int __init ehci_msm_init(void) { if (usb_disabled()) return -ENODEV; pr_info("%s: " DRIVER_DESC "\n", hcd_name); ehci_init_driver(&msm_hc_driver, &msm_overrides); return platform_driver_register(&ehci_msm_driver); } module_init(ehci_msm_init); static void __exit ehci_msm_cleanup(void) { platform_driver_unregister(&ehci_msm_driver); } module_exit(ehci_msm_cleanup); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_ALIAS("platform:msm-ehci"); MODULE_LICENSE("GPL");