# # Wireless LAN device configuration # menuconfig WLAN bool "Wireless LAN" depends on !S390 depends on NET select WIRELESS default y ---help--- This section contains all the pre 802.11 and 802.11 wireless device drivers. For a complete list of drivers and documentation on them refer to the wireless wiki: http://wireless.kernel.org/en/users/Drivers if WLAN config PCMCIA_RAYCS tristate "Aviator/Raytheon 2.4GHz wireless support" depends on PCMCIA select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV ---help--- Say Y here if you intend to attach an Aviator/Raytheon PCMCIA (PC-card) wireless Ethernet networking card to your computer. Please read the file for details. To compile this driver as a module, choose M here: the module will be called ray_cs. If unsure, say N. config LIBERTAS_THINFIRM tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" depends on MAC80211 select FW_LOADER ---help--- A library for Marvell Libertas 8xxx devices using thinfirm. config LIBERTAS_THINFIRM_DEBUG bool "Enable full debugging output in the Libertas thin firmware module." depends on LIBERTAS_THINFIRM ---help--- Debugging support. config LIBERTAS_THINFIRM_USB tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" depends on LIBERTAS_THINFIRM && USB ---help--- A driver for Marvell Libertas 8388 USB devices using thinfirm. config AIRO tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN) select WIRELESS_EXT select CRYPTO select WEXT_SPY select WEXT_PRIV ---help--- This is the standard Linux driver to support Cisco/Aironet ISA and PCI 802.11 wireless cards. It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X - with or without encryption) as well as card before the Cisco acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). This driver support both the standard Linux Wireless Extensions and Cisco proprietary API, so both the Linux Wireless Tools and the Cisco Linux utilities can be used to configure the card. The driver can be compiled as a module and will be named "airo". config ATMEL tristate "Atmel at76c50x chipset 802.11b support" depends on CFG80211 && (PCI || PCMCIA) select WIRELESS_EXT select WEXT_PRIV select FW_LOADER select CRC32 ---help--- A driver 802.11b wireless cards based on the Atmel fast-vnet chips. This driver supports standard Linux wireless extensions. Many cards based on this chipset do not have flash memory and need their firmware loaded at start-up. If yours is one of these, you will need to provide a firmware image to be loaded into the card by the driver. The Atmel firmware package can be downloaded from config PCI_ATMEL tristate "Atmel at76c506 PCI cards" depends on ATMEL && PCI ---help--- Enable support for PCI and mini-PCI cards containing the Atmel at76c506 chip. config PCMCIA_ATMEL tristate "Atmel at76c502/at76c504 PCMCIA cards" depends on ATMEL && PCMCIA select WIRELESS_EXT select FW_LOADER select CRC32 ---help--- Enable support for PCMCIA cards containing the Atmel at76c502 and at76c504 chips. config AT76C50X_USB tristate "Atmel at76c503/at76c505/at76c505a USB cards" depends on MAC80211 && USB select FW_LOADER ---help--- Enable support for USB Wireless devices using Atmel at76c503, at76c505 or at76c505a chips. config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" depends on CFG80211 && PCMCIA && (BROKEN || !M32R) select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV select CRYPTO select CRYPTO_AES ---help--- This is the standard Linux driver to support Cisco/Aironet PCMCIA 802.11 wireless cards. This driver is the same as the Aironet driver part of the Linux Pcmcia package. It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X - with or without encryption) as well as card before the Cisco acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom 802.11b cards. This driver support both the standard Linux Wireless Extensions and Cisco proprietary API, so both the Linux Wireless Tools and the Cisco Linux utilities can be used to configure the card. config PCMCIA_WL3501 tristate "Planet WL3501 PCMCIA cards" depends on CFG80211 && PCMCIA select WIRELESS_EXT select WEXT_SPY help A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. It has basic support for Linux wireless extensions and initial micro support for ethtool. config PRISM54 tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)' depends on PCI select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV select FW_LOADER ---help--- This enables support for FullMAC PCI/Cardbus prism54 devices. This driver is now deprecated in favor for the SoftMAC driver, p54pci. p54pci supports FullMAC PCI/Cardbus devices as well. For more information refer to the p54 wiki: http://wireless.kernel.org/en/users/Drivers/p54 Note: You need a motherboard with DMA support to use any of these cards When built as module you get the module prism54 config USB_ZD1201 tristate "USB ZD1201 based Wireless device support" depends on CFG80211 && USB select WIRELESS_EXT select WEXT_PRIV select FW_LOADER ---help--- Say Y if you want to use wireless LAN adapters based on the ZyDAS ZD1201 chip. This driver makes the adapter appear as a normal Ethernet interface, typically on wlan0. The zd1201 device requires external firmware to be loaded. This can be found at http://linux-lc100020.sourceforge.net/ To compile this driver as a module, choose M here: the module will be called zd1201. config USB_NET_RNDIS_WLAN tristate "Wireless RNDIS USB support" depends on USB depends on CFG80211 select USB_NET_DRIVERS select USB_USBNET select USB_NET_CDCETHER select USB_NET_RNDIS_HOST ---help--- This is a driver for wireless RNDIS devices. These are USB based adapters found in devices such as: Buffalo WLI-U2-KG125S U.S. Robotics USR5421 Belkin F5D7051 Linksys WUSB54GSv2 Linksys WUSB54GSC Asus WL169gE Eminent EM4045 BT Voyager 1055 Linksys WUSB54GSv1 U.S. Robotics USR5420 BUFFALO WLI-USB-G54 All of these devices are based on Broadcom 4320 chip which is the only wireless RNDIS chip known to date. If you choose to build a module, it'll be called rndis_wlan. source "drivers/net/wireless/rtl818x/Kconfig" config ADM8211 tristate "ADMtek ADM8211 support" depends on MAC80211 && PCI select CRC32 select EEPROM_93CX6 ---help--- This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: Xterasys Cardbus XN-2411b Blitz NetWave Point PC TrendNet 221pc Belkin F5D6001 SMC 2635W Linksys WPC11 v1 Fiberline FL-WL-200X 3com Office Connect (3CRSHPW796) Corega WLPCIB-11 SMC 2602W V2 EU D-Link DWL-520 Revision C However, some of these cards have been replaced with other chips like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or the Ralink RT2400 (SMC2635W) without a model number change. Thanks to Infineon-ADMtek for their support of this driver. config MAC80211_HWSIM tristate "Simulated radio testing tool for mac80211" depends on MAC80211 ---help--- This driver is a developer testing tool that can be used to test IEEE 802.11 networking stack (mac80211) functionality. This is not needed for normal wireless LAN usage and is only for testing. See Documentation/networking/mac80211_hwsim for more information on how to use this tool. To compile this driver as a module, choose M here: the module will be called mac80211_hwsim. If unsure, say N. config MWL8K tristate "Marvell 88W8xxx PCI/PCIe Wireless support" depends on MAC80211 && PCI ---help--- This driver supports Marvell TOPDOG 802.11 wireless cards. To compile this driver as a module, choose M here: the module will be called mwl8k. If unsure, say N. config WIFI_CONTROL_FUNC bool "Enable WiFi control function abstraction" help Enables Power/Reset/Carddetect function abstraction config WCNSS_CORE tristate "Qualcomm WCNSS CORE driver" select WIRELESS_EXT select WEXT_PRIV select WEXT_CORE select WEXT_SPY ---help--- Core driver for the Qualcomm WCNSS triple play connectivity subsystem config WCNSS_CORE_PRONTO tristate "Qualcomm WCNSS Pronto Support" depends on WCNSS_CORE ---help--- Pronto Support for the Qualcomm WCNSS triple play connectivity subsystem config WCNSS_REGISTER_DUMP_ON_BITE bool "Enable/disable WCNSS register dump when there is a WCNSS bite" depends on WCNSS_CORE_PRONTO ---help--- When Apps recieves a WDOG bite from WCNSS, collecting a register dump of WCNSS is helpful to root cause the failure. WCNSS may not be properly clocked in some WCNSS bite cases, and that may cause unclocked register access failures. So this feature is to enable/disable the register dump on WCNSS WDOG bite. config CNSS tristate "CNSS driver for PCIe wifi module" depends on PCI depends on PCI_MSI select CRYPTO select CRYPTO_HASH select CRYPTO_BLKCIPHER ---help--- This module adds support for the CNSS connectivity subsystem used for wifi devices based on the QCA AR6320 chipset running over PCIe. This driver also adds support to integrate PCIe WLAN module to subsystem restart framework. config CLD_LL_CORE tristate "Qualcomm core WLAN driver for QCA6174 chipset" select NL80211_TESTMODE select WEXT_CORE select WEXT_PRIV select WEXT_SPY select WIRELESS_EXT ---help--- This section contains the necessary modules needed to enable the core WLAN driver for Qualcomm QCA6174 chipset. Select Y to compile the driver in order to have WLAN functionality support. config CNSS_SECURE_FW bool "Enable/Disable Memory Allocation for Secure Firmware Feature" depends on CNSS ---help--- CLD Driver can use this for holding local copy of firmware binaries which is used for sha crypto computation. The Memory Allocation is done only if this Config Parameter is enabled config BUS_AUTO_SUSPEND bool "Enable/Disable Runtime PM support for PCIe based WLAN Drivers" depends on CNSS depends on PCI ---help--- Runtime Power Management is supported for PCIe based WLAN Drivers. The features enable cld wlan driver to suspend pcie bus when APPS is awake based on the driver inactivity with the Firmware. The Feature uses runtime power management framework from kernel to track bus access clients and to synchronize the driver activity during system pm. This config flag controls the feature per target based. The feature requires CNSS driver support. config WCNSS_MEM_PRE_ALLOC tristate "WCNSS pre-alloc memory support" ---help--- Pre-allocate memory for the WLAN driver module. This feature enable cld wlan driver to use pre allocated memory for it's internal usage and release it to back to pre allocated pool. This memory is allocated at the cold boot time. config CNSS_CRYPTO tristate "Enable CNSS crypto support" ---help--- Add crypto support for the WLAN driver module. This feature enable wlan driver to use the crypto APIs exported from cnss platform driver. This crypto APIs used to generate cipher key and add support for the WLAN driver module security protocol. source "drivers/net/wireless/ath/Kconfig" source "drivers/net/wireless/b43/Kconfig" source "drivers/net/wireless/b43legacy/Kconfig" source "drivers/net/wireless/brcm80211/Kconfig" source "drivers/net/wireless/hostap/Kconfig" source "drivers/net/wireless/ipw2x00/Kconfig" source "drivers/net/wireless/iwlwifi/Kconfig" source "drivers/net/wireless/iwlegacy/Kconfig" source "drivers/net/wireless/libertas/Kconfig" source "drivers/net/wireless/orinoco/Kconfig" source "drivers/net/wireless/p54/Kconfig" source "drivers/net/wireless/rt2x00/Kconfig" source "drivers/net/wireless/rtlwifi/Kconfig" source "drivers/net/wireless/ti/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" source "drivers/net/wireless/mwifiex/Kconfig" source "drivers/net/wireless/cw1200/Kconfig" source "drivers/net/wireless/rsi/Kconfig" source "drivers/net/wireless/cnss/Kconfig" endif # WLAN