/* * * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. * Not a Contribution. * * Copyright 2012 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); you * may not use this file except in compliance with the License. You may * obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or * implied. See the License for the specific language governing * permissions and limitations under the License. * */ /****************************************************************************** * * Filename: hciattach_rome.c * * Description: Contains controller-specific functions, like * firmware patch download * low power mode operations * ******************************************************************************/ #define LOG_TAG "bt_vendor" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "hciattach_rome.h" #include "hciattach.h" #ifdef __cplusplus } #endif /****************************************************************************** ** Variables ******************************************************************************/ FILE *file; unsigned char *phdr_buffer; unsigned char *pdata_buffer = NULL; patch_info rampatch_patch_info; int rome_ver = ROME_VER_UNKNOWN; unsigned char gTlv_type; unsigned char gtlv_dwndcfg; char *rampatch_file_path; char *nvm_file_path; vnd_userial_cb_t vnd_userial; unsigned char wait_vsc_evt = TRUE; /****************************************************************************** ** Extern variables ******************************************************************************/ //extern unsigned char vnd_local_bd_addr[6]; /***************************************************************************** ** Functions *****************************************************************************/ /******************************************************************************* ** ** Function userial_to_tcio_baud ** ** Description helper function converts USERIAL baud rates into TCIO ** conforming baud rates ** ** Returns TRUE/FALSE ** *******************************************************************************/ unsigned char userial_to_tcio_baud(unsigned char cfg_baud, unsigned int *baud) { if (cfg_baud == USERIAL_BAUD_115200) *baud = B115200; else if (cfg_baud == USERIAL_BAUD_4M) *baud = B4000000; else if (cfg_baud == USERIAL_BAUD_3M) *baud = B3000000; else if (cfg_baud == USERIAL_BAUD_2M) *baud = B2000000; else if (cfg_baud == USERIAL_BAUD_1M) *baud = B1000000; else if (cfg_baud == USERIAL_BAUD_921600) *baud = B921600; else if (cfg_baud == USERIAL_BAUD_460800) *baud = B460800; else if (cfg_baud == USERIAL_BAUD_230400) *baud = B230400; else if (cfg_baud == USERIAL_BAUD_57600) *baud = B57600; else if (cfg_baud == USERIAL_BAUD_19200) *baud = B19200; else if (cfg_baud == USERIAL_BAUD_9600) *baud = B9600; else if (cfg_baud == USERIAL_BAUD_1200) *baud = B1200; else if (cfg_baud == USERIAL_BAUD_600) *baud = B600; else { fprintf(stderr, "userial vendor open: unsupported baud idx %i\n", cfg_baud); *baud = B115200; return FALSE; } return TRUE; } /******************************************************************************* ** ** Function userial_vendor_set_baud ** ** Description Set new baud rate ** ** Returns None ** *******************************************************************************/ void userial_vendor_set_baud(unsigned char userial_baud) { unsigned int tcio_baud; fprintf(stderr, "## userial_vendor_set_baud: %d\n", userial_baud); if (tcgetattr(vnd_userial.fd, &vnd_userial.termios) < 0) { perror("Can't get port settings"); return; } cfmakeraw(&vnd_userial.termios); vnd_userial.termios.c_cflag |= CLOCAL; vnd_userial.termios.c_cflag |= CREAD; vnd_userial.termios.c_cflag |= CS8; tcsetattr(vnd_userial.fd, TCSANOW, &vnd_userial.termios); userial_to_tcio_baud(userial_baud, &tcio_baud); cfsetospeed(&vnd_userial.termios, tcio_baud); cfsetispeed(&vnd_userial.termios, tcio_baud); tcsetattr(vnd_userial.fd, TCSADRAIN, &vnd_userial.termios); /* don't change speed until last write done */ } /******************************************************************************* ** ** Function userial_vendor_ioctl ** ** Description ioctl inteface ** ** Returns None ** *******************************************************************************/ int userial_vendor_ioctl(int fd, userial_vendor_ioctl_op_t op, int *p_data) { int err = -1; struct termios ti; if (tcgetattr(fd, &ti) < 0) { perror("Can't get port settings"); return -1; } cfmakeraw(&ti); ti.c_cflag |= CLOCAL; ti.c_cflag |= CREAD; ti.c_cflag |= CS8; switch(op) { #if (BT_WAKE_VIA_USERIAL_IOCTL==TRUE) case USERIAL_OP_ASSERT_BT_WAKE: VNDUSERIALDBG("## userial_vendor_ioctl: Asserting BT_Wake ##"); err = ioctl(fd, USERIAL_IOCTL_BT_WAKE_ASSERT, NULL); break; case USERIAL_OP_DEASSERT_BT_WAKE: VNDUSERIALDBG("## userial_vendor_ioctl: De-asserting BT_Wake ##"); err = ioctl(fd, USERIAL_IOCTL_BT_WAKE_DEASSERT, NULL); break; case USERIAL_OP_GET_BT_WAKE_STATE: err = ioctl(fd, USERIAL_IOCTL_BT_WAKE_GET_ST, p_data); break; #endif // (BT_WAKE_VIA_USERIAL_IOCTL==TRUE) case USERIAL_OP_FLOW_ON: fprintf(stderr, "## userial_vendor_ioctl: UART Flow On\n "); ti.c_cflag |= CRTSCTS; if (err = tcsetattr(fd, TCSANOW, &ti) < 0) { perror("Can't set port settings"); return -1; } break; case USERIAL_OP_FLOW_OFF: fprintf(stderr, "## userial_vendor_ioctl: UART Flow Off\n "); ti.c_cflag &= ~CRTSCTS; if (err = tcsetattr(fd, TCSANOW, &ti) < 0) { fprintf(stderr, "Can't set port settings"); return -1; } break; default: break; } return err; } int get_vs_hci_event(unsigned char *rsp) { int err = 0, soc_id =0; unsigned char paramlen = 0; if( (rsp[EVENTCODE_OFFSET] == VSEVENT_CODE) || (rsp[EVENTCODE_OFFSET] == EVT_CMD_COMPLETE)) fprintf(stderr, "%s: Received HCI-Vendor Specific event\n", __FUNCTION__); else { fprintf(stderr, "%s: Failed to receive HCI-Vendor Specific event\n", __FUNCTION__); err = -EIO; goto failed; } fprintf(stderr, "%s: Parameter Length: 0x%x\n", __FUNCTION__, paramlen = rsp[EVT_PLEN]); fprintf(stderr, "%s: Command response: 0x%x\n", __FUNCTION__, rsp[CMD_RSP_OFFSET]); fprintf(stderr, "%s: Response type : 0x%x\n", __FUNCTION__, rsp[RSP_TYPE_OFFSET]); /* Check the status of the operation */ switch ( rsp[CMD_RSP_OFFSET] ) { case EDL_CMD_REQ_RES_EVT: fprintf(stderr, "%s: Command Request Response\n", __FUNCTION__); switch(rsp[RSP_TYPE_OFFSET]) { case EDL_PATCH_VER_RES_EVT: case EDL_APP_VER_RES_EVT: fprintf(stderr, "\t Current Product ID\t\t: 0x%08x\n", (unsigned int)(rsp[PATCH_PROD_ID_OFFSET +3] << 24 | rsp[PATCH_PROD_ID_OFFSET+2] << 16 | rsp[PATCH_PROD_ID_OFFSET+1] << 8 | rsp[PATCH_PROD_ID_OFFSET] )); /* Patch Version indicates FW patch version */ fprintf(stderr, "\t Current Patch Version\t\t: 0x%04x\n", (unsigned short)(rsp[PATCH_PATCH_VER_OFFSET + 1] << 8 | rsp[PATCH_PATCH_VER_OFFSET] )); /* ROM Build Version indicates ROM build version like 1.0/1.1/2.0 */ fprintf(stderr, "\t Current ROM Build Version\t: 0x%04x\n", rome_ver = (int)(rsp[PATCH_ROM_BUILD_VER_OFFSET + 1] << 8 | rsp[PATCH_ROM_BUILD_VER_OFFSET] )); /* In case rome 1.0/1.1, there is no SOC ID version available */ if (paramlen - 10) { fprintf(stderr, "\t Current SOC Version\t\t: 0x%08x\n", soc_id = (unsigned int)(rsp[PATCH_SOC_VER_OFFSET +3] << 24 | rsp[PATCH_SOC_VER_OFFSET+2] << 16 | rsp[PATCH_SOC_VER_OFFSET+1] << 8 | rsp[PATCH_SOC_VER_OFFSET] )); } /* Rome Chipset Version can be decided by Patch version and SOC version, Upper 2 bytes will be used for Patch version and Lower 2 bytes will be used for SOC as combination for BT host driver */ rome_ver = (rome_ver << 16) | (soc_id & 0x0000ffff); break; case EDL_TVL_DNLD_RES_EVT: case EDL_CMD_EXE_STATUS_EVT: switch (err = rsp[CMD_STATUS_OFFSET]) { case HCI_CMD_SUCCESS: fprintf(stderr, "%s: Download Packet successfully!\n", __FUNCTION__); break; case PATCH_LEN_ERROR: fprintf(stderr, "%s: Invalid patch length argument passed for EDL PATCH " "SET REQ cmd\n", __FUNCTION__); break; case PATCH_VER_ERROR: fprintf(stderr, "%s: Invalid patch version argument passed for EDL PATCH " "SET REQ cmd\n", __FUNCTION__); break; case PATCH_CRC_ERROR: fprintf(stderr, "%s: CRC check of patch failed!!!\n", __FUNCTION__); break; case PATCH_NOT_FOUND: fprintf(stderr, "%s: Invalid patch data!!!\n", __FUNCTION__); break; case TLV_TYPE_ERROR: fprintf(stderr, "%s: TLV Type Error !!!\n", __FUNCTION__); break; default: fprintf(stderr, "%s: Undefined error (0x%x)", __FUNCTION__, err); break; } break; } break; case NVM_ACCESS_CODE: fprintf(stderr, "%s: NVM Access Code!!!\n", __FUNCTION__); err = HCI_CMD_SUCCESS; break; case EDL_SET_BAUDRATE_RSP_EVT: /* Rome 1.1 has bug with the response, so it should ignore it. */ if (rsp[BAUDRATE_RSP_STATUS_OFFSET] != BAUDRATE_CHANGE_SUCCESS) { fprintf(stderr, "%s: Set Baudrate request failed - 0x%x\n", __FUNCTION__, rsp[CMD_STATUS_OFFSET]); err = -1; } break; default: fprintf(stderr, "%s: Not a valid status!!!\n", __FUNCTION__); err = -1; break; } failed: return err; } int wait_for_data(int fd, int maxTimeOut) { fd_set infids; struct timeval timeout; if (maxTimeOut <= 0) { fprintf(stderr, "%s: Invalid timeout value specified", __func__); return -EINVAL; } FD_ZERO (&infids); FD_SET (fd, &infids); timeout.tv_sec = maxTimeOut; timeout.tv_usec = 0; /* Check whether data is available in TTY buffer before calling read() */ if (select (fd + 1, &infids, NULL, NULL, &timeout) < 1) { fprintf(stderr, "%s: Timing out on select for %d secs.\n", __FUNCTION__, maxTimeOut); return -1; } else fprintf(stderr, "%s: HCI-VS-EVENT available in TTY Serial buffer\n", __FUNCTION__); return 1; } /* * Read an VS HCI event from the given file descriptor. */ int read_vs_hci_event(int fd, unsigned char* buf, int size) { int remain, r, retry = 0; int count = 0; if (size <= 0) { fprintf(stderr, "Invalid size arguement!\n"); return -1; } fprintf(stderr, "%s: Wait for HCI-Vendor Specfic Event from SOC\n", __FUNCTION__); /* Check whether data is available in TTY buffer before calling read() */ if (wait_for_data(fd, SELECT_TIMEOUT) < 1) return -1; /* The first byte identifies the packet type. For HCI event packets, it * should be 0x04, so we read until we get to the 0x04. */ /* It will keep reading until find 0x04 byte */ while (1) { /* Read UART Buffer for HCI-DATA */ r = read(fd, buf, 1); if (r <= 0) { fprintf(stderr, "%s: read() failed. error: %d\n", __FUNCTION__, r); return -1; } /* Check if received data is HCI-DATA or not. * If not HCI-DATA, then retry reading the UART Buffer once. * Sometimes there could be corruption on the UART lines and to * avoid that retry once reading the UART Buffer for HCI-DATA. */ if (buf[0] == 0x04) { /* Recvd. HCI DATA */ retry = 0; break; } else if (retry < MAX_RETRY_CNT){ /* Retry mechanism */ retry++; fprintf(stderr, "%s: Not an HCI-VS-Event! buf[0]: %d", __FUNCTION__, buf[0]); if (wait_for_data(fd, SELECT_TIMEOUT) < 1) return -1; else /* Data available in UART Buffer: Continue to read */ continue; } else { /* RETRY failed : Exiting with failure */ fprintf(stderr, "%s: RETRY failed!", __FUNCTION__); return -1; } } count++; fprintf(stderr, "%s: Wait for HCI-Vendor Specfic Event from SOC, buf[0] - 0x%x\n", __FUNCTION__, buf[0]); /* The next two bytes are the event code and parameter total length. */ while (count < 3) { r = read(fd, buf + count, 3 - count); if ((r <= 0) || (buf[1] != 0xFF )) { fprintf(stderr, "It is not VS event !!\n"); return -1; } count += r; } fprintf(stderr, "%s: Wait for HCI-Vendor Specfic Event from SOC, buf[1] - 0x%x\n", __FUNCTION__, buf[1]); /* Now we read the parameters. */ if (buf[2] < (size - 3)) remain = buf[2]; else remain = size - 3; while ((count - 3) < remain) { r = read(fd, buf + count, remain - (count - 3)); if (r <= 0) return -1; count += r; } /* Check if the set patch command is successful or not */ if(get_vs_hci_event(buf) != HCI_CMD_SUCCESS) return -1; fprintf(stderr, "%s: Wait for HCI-Vendor Specfic Event from SOC, count - 0x%x\n", __FUNCTION__, count); return count; } int hci_send_vs_cmd(int fd, unsigned char *cmd, unsigned char *rsp, int size) { int ret = 0; /* Send the HCI command packet to UART for transmission */ ret = write(fd, cmd, size); if (ret != size) { fprintf(stderr, "%s: Send failed with ret value: %d\n", __FUNCTION__, ret); goto failed; } if (wait_vsc_evt) { /* Check for response from the Controller */ if (read_vs_hci_event(fd, rsp, HCI_MAX_EVENT_SIZE) < 0) { ret = -ETIMEDOUT; fprintf(stderr, "%s: Failed to get HCI-VS Event from SOC\n", __FUNCTION__); goto failed; } fprintf(stderr, "%s: Received HCI-Vendor Specific Event from SOC\n", __FUNCTION__); } failed: return ret; } void frame_hci_cmd_pkt( unsigned char *cmd, int edl_cmd, unsigned int p_base_addr, int segtNo, int size ) { int offset = 0; hci_command_hdr *cmd_hdr; memset(cmd, 0x0, HCI_MAX_CMD_SIZE); cmd_hdr = (void *) (cmd + 1); cmd[0] = HCI_COMMAND_PKT; cmd_hdr->opcode = cmd_opcode_pack(HCI_VENDOR_CMD_OGF, HCI_PATCH_CMD_OCF); cmd_hdr->plen = size; cmd[4] = edl_cmd; switch (edl_cmd) { case EDL_PATCH_SET_REQ_CMD: /* Copy the patch header info as CMD params */ memcpy(&cmd[5], phdr_buffer, PATCH_HDR_LEN); fprintf(stderr, "%s: Sending EDL_PATCH_SET_REQ_CMD\n", __FUNCTION__); fprintf(stderr, "HCI-CMD %d:\t0x%x \t0x%x \t0x%x \t0x%x \t0x%x\n", segtNo, cmd[0], cmd[1], cmd[2], cmd[3], cmd[4]); break; case EDL_PATCH_DLD_REQ_CMD: offset = ((segtNo - 1) * MAX_DATA_PER_SEGMENT); p_base_addr += offset; cmd_hdr->plen = (size + 6); cmd[5] = (size + 4); cmd[6] = EXTRACT_BYTE(p_base_addr, 0); cmd[7] = EXTRACT_BYTE(p_base_addr, 1); cmd[8] = EXTRACT_BYTE(p_base_addr, 2); cmd[9] = EXTRACT_BYTE(p_base_addr, 3); memcpy(&cmd[10], (pdata_buffer + offset), size); fprintf(stderr, "%s: Sending EDL_PATCH_DLD_REQ_CMD: size: %d bytes\n", __FUNCTION__, size); fprintf(stderr, "HCI-CMD %d:\t0x%x\t0x%x\t0x%x\t0x%x\t0x%x\t0x%x\t0x%x\t" "0x%x\t0x%x\t0x%x\t\n", segtNo, cmd[0], cmd[1], cmd[2], cmd[3], cmd[4], cmd[5], cmd[6], cmd[7], cmd[8], cmd[9]); break; case EDL_PATCH_ATCH_REQ_CMD: fprintf(stderr, "%s: Sending EDL_PATCH_ATTACH_REQ_CMD\n", __FUNCTION__); fprintf(stderr, "HCI-CMD %d:\t0x%x \t0x%x \t0x%x \t0x%x \t0x%x\n", segtNo, cmd[0], cmd[1], cmd[2], cmd[3], cmd[4]); break; case EDL_PATCH_RST_REQ_CMD: fprintf(stderr, "%s: Sending EDL_PATCH_RESET_REQ_CMD\n", __FUNCTION__); fprintf(stderr, "HCI-CMD %d:\t0x%x \t0x%x \t0x%x \t0x%x \t0x%x\n", segtNo, cmd[0], cmd[1], cmd[2], cmd[3], cmd[4]); break; case EDL_PATCH_VER_REQ_CMD: fprintf(stderr, "%s: Sending EDL_PATCH_VER_REQ_CMD\n", __FUNCTION__); fprintf(stderr, "HCI-CMD %d:\t0x%x \t0x%x \t0x%x \t0x%x \t0x%x\n", segtNo, cmd[0], cmd[1], cmd[2], cmd[3], cmd[4]); break; case EDL_PATCH_TLV_REQ_CMD: fprintf(stderr, "%s: Sending EDL_PATCH_TLV_REQ_CMD\n", __FUNCTION__); /* Parameter Total Length */ cmd[3] = size +2; /* TLV Segment Length */ cmd[5] = size; fprintf(stderr, "HCI-CMD %d:\t0x%x \t0x%x \t0x%x \t0x%x \t0x%x \t0x%x\n", segtNo, cmd[0], cmd[1], cmd[2], cmd[3], cmd[4], cmd[5]); offset = (segtNo * MAX_SIZE_PER_TLV_SEGMENT); memcpy(&cmd[6], (pdata_buffer + offset), size); break; default: fprintf(stderr, "%s: Unknown EDL CMD !!!\n", __FUNCTION__); } } void rome_extract_patch_header_info(unsigned char *buf) { int index; /* Extract patch id */ for (index = 0; index < 4; index++) rampatch_patch_info.patch_id |= (LSH(buf[index + P_ID_OFFSET], (index * 8))); /* Extract (ROM and BUILD) version information */ for (index = 0; index < 2; index++) rampatch_patch_info.patch_ver.rom_version |= (LSH(buf[index + P_ROME_VER_OFFSET], (index * 8))); for (index = 0; index < 2; index++) rampatch_patch_info.patch_ver.build_version |= (LSH(buf[index + P_BUILD_VER_OFFSET], (index * 8))); /* Extract patch base and entry addresses */ for (index = 0; index < 4; index++) rampatch_patch_info.patch_base_addr |= (LSH(buf[index + P_BASE_ADDR_OFFSET], (index * 8))); /* Patch BASE & ENTRY addresses are same */ rampatch_patch_info.patch_entry_addr = rampatch_patch_info.patch_base_addr; /* Extract total length of the patch payload */ for (index = 0; index < 4; index++) rampatch_patch_info.patch_length |= (LSH(buf[index + P_LEN_OFFSET], (index * 8))); /* Extract the CRC checksum of the patch payload */ for (index = 0; index < 4; index++) rampatch_patch_info.patch_crc |= (LSH(buf[index + P_CRC_OFFSET], (index * 8))); /* Extract patch control value */ for (index = 0; index < 4; index++) rampatch_patch_info.patch_ctrl |= (LSH(buf[index + P_CONTROL_OFFSET], (index * 8))); fprintf(stderr, "PATCH_ID\t : 0x%x\n", rampatch_patch_info.patch_id); fprintf(stderr, "ROM_VERSION\t : 0x%x\n", rampatch_patch_info.patch_ver.rom_version); fprintf(stderr, "BUILD_VERSION\t : 0x%x\n", rampatch_patch_info.patch_ver.build_version); fprintf(stderr, "PATCH_LENGTH\t : 0x%x\n", rampatch_patch_info.patch_length); fprintf(stderr, "PATCH_CRC\t : 0x%x\n", rampatch_patch_info.patch_crc); fprintf(stderr, "PATCH_CONTROL\t : 0x%x\n", rampatch_patch_info.patch_ctrl); fprintf(stderr, "PATCH_BASE_ADDR\t : 0x%x\n", rampatch_patch_info.patch_base_addr); } int rome_edl_set_patch_request(int fd) { int size, err; unsigned char cmd[HCI_MAX_CMD_SIZE]; unsigned char rsp[HCI_MAX_EVENT_SIZE]; /* Frame the HCI CMD to be sent to the Controller */ frame_hci_cmd_pkt(cmd, EDL_PATCH_SET_REQ_CMD, 0, -1, PATCH_HDR_LEN + 1); /* Total length of the packet to be sent to the Controller */ size = (HCI_CMD_IND + HCI_COMMAND_HDR_SIZE + cmd[PLEN]); /* Send HCI Command packet to Controller */ err = hci_send_vs_cmd(fd, (unsigned char *)cmd, rsp, size); if ( err != size) { fprintf(stderr, "Failed to set the patch info to the Controller!\n"); goto error; } err = read_hci_event(fd, rsp, HCI_MAX_EVENT_SIZE); if ( err < 0) { fprintf(stderr, "%s: Failed to set patch info on Controller\n", __FUNCTION__); goto error; } fprintf(stderr, "%s: Successfully set patch info on the Controller\n", __FUNCTION__); error: return err; } int rome_edl_patch_download_request(int fd) { int no_of_patch_segment; int index = 1, err = 0, size = 0; unsigned int p_base_addr; unsigned char cmd[HCI_MAX_CMD_SIZE]; unsigned char rsp[HCI_MAX_EVENT_SIZE]; no_of_patch_segment = (rampatch_patch_info.patch_length / MAX_DATA_PER_SEGMENT); fprintf(stderr, "%s: %d patch segments to be d'loaded from patch base addr: 0x%x\n", __FUNCTION__, no_of_patch_segment, rampatch_patch_info.patch_base_addr); /* Initialize the patch base address from the one read from bin file */ p_base_addr = rampatch_patch_info.patch_base_addr; /* * Depending upon size of the patch payload, download the patches in * segments with a max. size of 239 bytes */ for (index = 1; index <= no_of_patch_segment; index++) { fprintf(stderr, "%s: Downloading patch segment: %d\n", __FUNCTION__, index); /* Frame the HCI CMD PKT to be sent to Controller*/ frame_hci_cmd_pkt(cmd, EDL_PATCH_DLD_REQ_CMD, p_base_addr, index, MAX_DATA_PER_SEGMENT); /* Total length of the packet to be sent to the Controller */ size = (HCI_CMD_IND + HCI_COMMAND_HDR_SIZE + cmd[PLEN]); /* Initialize the RSP packet everytime to 0 */ memset(rsp, 0x0, HCI_MAX_EVENT_SIZE); /* Send HCI Command packet to Controller */ err = hci_send_vs_cmd(fd, (unsigned char *)cmd, rsp, size); if ( err != size) { fprintf(stderr, "Failed to send the patch payload to the Controller!\n"); goto error; } /* Read Command Complete Event */ err = read_hci_event(fd, rsp, HCI_MAX_EVENT_SIZE); if ( err < 0) { fprintf(stderr, "%s: Failed to downlaod patch segment: %d!\n", __FUNCTION__, index); goto error; } fprintf(stderr, "%s: Successfully downloaded patch segment: %d\n", __FUNCTION__, index); } /* Check if any pending patch data to be sent */ size = (rampatch_patch_info.patch_length < MAX_DATA_PER_SEGMENT) ? rampatch_patch_info.patch_length : (rampatch_patch_info.patch_length % MAX_DATA_PER_SEGMENT); if (size) { /* Frame the HCI CMD PKT to be sent to Controller*/ frame_hci_cmd_pkt(cmd, EDL_PATCH_DLD_REQ_CMD, p_base_addr, index, size); /* Initialize the RSP packet everytime to 0 */ memset(rsp, 0x0, HCI_MAX_EVENT_SIZE); /* Total length of the packet to be sent to the Controller */ size = (HCI_CMD_IND + HCI_COMMAND_HDR_SIZE + cmd[PLEN]); /* Send HCI Command packet to Controller */ err = hci_send_vs_cmd(fd, (unsigned char *)cmd, rsp, size); if ( err != size) { fprintf(stderr, "Failed to send the patch payload to the Controller!\n"); goto error; } /* Read Command Complete Event */ err = read_hci_event(fd, rsp, HCI_MAX_EVENT_SIZE); if ( err < 0) { fprintf(stderr, "%s: Failed to downlaod patch segment: %d!\n", __FUNCTION__, index); goto error; } fprintf(stderr, "%s: Successfully downloaded patch segment: %d\n", __FUNCTION__, index); } error: return err; } static int rome_download_rampatch(int fd) { int c, size, index, ret = -1; fprintf(stderr, "%s:\n", __FUNCTION__); /* Get handle to the RAMPATCH binary file */ fprintf(stderr, "%s: Getting handle to the RAMPATCH binary file from %s\n", __FUNCTION__, ROME_FW_PATH); file = fopen(ROME_FW_PATH, "r"); if (file == NULL) { fprintf(stderr, "%s: Failed to get handle to the RAMPATCH bin file!\n", __FUNCTION__); return -ENFILE; } /* Allocate memory for the patch headder info */ fprintf(stderr, "%s: Allocating memory for the patch header\n", __FUNCTION__); phdr_buffer = (unsigned char *) malloc(PATCH_HDR_LEN + 1); if (phdr_buffer == NULL) { fprintf(stderr, "%s: Failed to allocate memory for patch header\n", __FUNCTION__); goto phdr_alloc_failed; } for (index = 0; index < PATCH_HDR_LEN + 1; index++) phdr_buffer[index] = 0x0; /* Read 28 bytes of patch header information */ fprintf(stderr, "%s: Reading patch header info\n", __FUNCTION__); index = 0; do { c = fgetc (file); phdr_buffer[index++] = (unsigned char)c; } while (index != PATCH_HDR_LEN); /* Save the patch header info into local structure */ fprintf(stderr, "%s: Saving patch hdr. info\n", __FUNCTION__); rome_extract_patch_header_info((unsigned char *)phdr_buffer); /* Set the patch header info onto the Controller */ ret = rome_edl_set_patch_request(fd); if (ret < 0) { fprintf(stderr, "%s: Error setting the patchheader info!\n", __FUNCTION__); goto pdata_alloc_failed; } /* Allocate memory for the patch payload */ fprintf(stderr, "%s: Allocating memory for patch payload\n", __FUNCTION__); size = rampatch_patch_info.patch_length; pdata_buffer = (unsigned char *) malloc(size+1); if (pdata_buffer == NULL) { fprintf(stderr, "%s: Failed to allocate memory for patch payload\n", __FUNCTION__); goto pdata_alloc_failed; } for (index = 0; index < size+1; index++) pdata_buffer[index] = 0x0; /* Read the patch data from Rampatch binary image */ fprintf(stderr, "%s: Reading patch payload from RAMPATCH file\n", __FUNCTION__); index = 0; do { c = fgetc (file); pdata_buffer[index++] = (unsigned char)c; } while (c != EOF); /* Downloading patches in segments to controller */ ret = rome_edl_patch_download_request(fd); if (ret < 0) { fprintf(stderr, "%s: Error downloading patch segments!\n", __FUNCTION__); goto cleanup; } cleanup: free(pdata_buffer); pdata_alloc_failed: free(phdr_buffer); phdr_alloc_failed: fclose(file); return ret; } int rome_attach_rampatch(int fd) { int size, err; unsigned char cmd[HCI_MAX_CMD_SIZE]; unsigned char rsp[HCI_MAX_EVENT_SIZE]; /* Frame the HCI CMD to be sent to the Controller */ frame_hci_cmd_pkt(cmd, EDL_PATCH_ATCH_REQ_CMD, 0, -1, EDL_PATCH_CMD_LEN); /* Total length of the packet to be sent to the Controller */ size = (HCI_CMD_IND + HCI_COMMAND_HDR_SIZE + cmd[PLEN]); /* Send HCI Command packet to Controller */ err = hci_send_vs_cmd(fd, (unsigned char *)cmd, rsp, size); if ( err != size) { fprintf(stderr, "Failed to attach the patch payload to the Controller!\n"); goto error; } /* Read Command Complete Event */ err = read_hci_event(fd, rsp, HCI_MAX_EVENT_SIZE); if ( err < 0) { fprintf(stderr, "%s: Failed to attach the patch segment(s)\n", __FUNCTION__); goto error; } error: return err; } int rome_rampatch_reset(int fd) { int size, err = 0; unsigned char cmd[HCI_MAX_CMD_SIZE]; struct timespec tm = { 0, 100*1000*1000 }; /* 100 ms */ /* Frame the HCI CMD to be sent to the Controller */ frame_hci_cmd_pkt(cmd, EDL_PATCH_RST_REQ_CMD, 0, -1, EDL_PATCH_CMD_LEN); /* Total length of the packet to be sent to the Controller */ size = (HCI_CMD_IND + HCI_COMMAND_HDR_SIZE + EDL_PATCH_CMD_LEN); /* Send HCI Command packet to Controller */ err = write(fd, cmd, size); if (err != size) { fprintf(stderr, "%s: Send failed with ret value: %d\n", __FUNCTION__, err); goto error; } /* * Controller doesn't sends any response for the patch reset * command. HOST has to wait for 100ms before proceeding. */ nanosleep(&tm, NULL); error: return err; } int get_value_from_config(char *file_path,char *param) { FILE *pfile = NULL; char *line = NULL; char *pch = NULL; char param_str[PARAM_LEN]; int bytes_read = 0, position; int ret = -1; if (!file_path || !param) { fprintf(stderr,"Invalid arguments\n"); return -EINVAL; } pfile = fopen(file_path, "r" ); if (!pfile) { fprintf(stderr, "Failed to open %s\n", file_path); return ret; } while (getline(&line, &bytes_read, pfile) > 0 ) { if (line[0] != '#' && line[0] != '\n') { pch = memchr(line, '=', strlen(line)); if (pch != NULL) { position = pch - line; strlcpy(param_str, line, sizeof(param_str)); if (position >= sizeof(param_str)) position = sizeof(param_str) - 1; if (strncmp(param_str, param, position) == 0) { ret = atoi(pch + 1); break; } } } } /* getline() will allocate a buffer for storing the line. */ free(line); fclose(pfile); return ret; } int rome_get_tlv_file(char *file_path) { FILE * pFile; long fileSize; int readSize, nvm_length, nvm_index, i; unsigned short nvm_tag_len; tlv_patch_info *ptlv_header; tlv_nvm_hdr *nvm_ptr; unsigned char data_buf[PRINT_BUF_SIZE]={0,}; unsigned char *nvm_byte_ptr; unsigned char bdaddr[6]; unsigned short pcm_value, ibs_value; unsigned short deep_sleep_value; fprintf(stderr, "File Open (%s)\n", file_path); pFile = fopen ( file_path , "r" ); if (pFile==NULL) {; fprintf(stderr, "%s File Open Fail\n", file_path); return -1; } /* Get File Size */ fseek (pFile , 0 , SEEK_END); if((fileSize = ftell(pFile)) < 0) { fprintf(stderr, "%s: fail to get current file position\n", file_path); fclose(pFile); return -1; } if(fileSize == 0) { fprintf(stderr, "%s: no content in the file\n", file_path); fclose(pFile); return -1; } rewind (pFile); pdata_buffer = (unsigned char*) malloc (sizeof(char)*fileSize); if (pdata_buffer == NULL) { fprintf(stderr, "Allocated Memory failed\n"); fclose (pFile); return -1; } /* Copy file into allocated buffer */ readSize = fread (pdata_buffer,1,fileSize,pFile); /* File Close */ fclose (pFile); if (readSize != fileSize) { fprintf(stderr, "Read file size(%d) not matched with actual file size (%ld bytes)\n",readSize,fileSize); return -1; } ptlv_header = (tlv_patch_info *) pdata_buffer; /* To handle different event between rampatch and NVM */ gTlv_type = ptlv_header->tlv_type; gtlv_dwndcfg = ptlv_header->tlv.patch.dwnd_cfg; if(ptlv_header->tlv_type == TLV_TYPE_PATCH){ fprintf(stderr, "====================================================\n"); fprintf(stderr, "TLV Type\t\t\t : 0x%x\n", ptlv_header->tlv_type); fprintf(stderr, "Length\t\t\t : %d bytes\n", (ptlv_header->tlv_length1) | (ptlv_header->tlv_length2 << 8) | (ptlv_header->tlv_length3 << 16)); fprintf(stderr, "Total Length\t\t\t : %d bytes\n", ptlv_header->tlv.patch.tlv_data_len); fprintf(stderr, "Patch Data Length\t\t\t : %d bytes\n",ptlv_header->tlv.patch.tlv_patch_data_len); fprintf(stderr, "Signing Format Version\t : 0x%x\n", ptlv_header->tlv.patch.sign_ver); fprintf(stderr, "Signature Algorithm\t\t : 0x%x\n", ptlv_header->tlv.patch.sign_algorithm); fprintf(stderr, "Event Handling\t\t\t : 0x%x", ptlv_header->tlv.patch.dwnd_cfg); fprintf(stderr, "Reserved\t\t\t : 0x%x\n", ptlv_header->tlv.patch.reserved1); fprintf(stderr, "Product ID\t\t\t : 0x%04x\n", ptlv_header->tlv.patch.prod_id); fprintf(stderr, "Rom Build Version\t\t : 0x%04x\n", ptlv_header->tlv.patch.build_ver); fprintf(stderr, "Patch Version\t\t : 0x%04x\n", ptlv_header->tlv.patch.patch_ver); fprintf(stderr, "Reserved\t\t\t : 0x%x\n", ptlv_header->tlv.patch.reserved2); fprintf(stderr, "Patch Entry Address\t\t : 0x%x\n", (ptlv_header->tlv.patch.patch_entry_addr)); fprintf(stderr, "====================================================\n"); } else if(ptlv_header->tlv_type == TLV_TYPE_NVM) { fprintf(stderr, "====================================================\n"); fprintf(stderr, "TLV Type\t\t\t : 0x%x\n", ptlv_header->tlv_type); fprintf(stderr, "Length\t\t\t : %d bytes\n", nvm_length = (ptlv_header->tlv_length1) | (ptlv_header->tlv_length2 << 8) | (ptlv_header->tlv_length3 << 16)); if(nvm_length <= 0) return readSize; for(nvm_byte_ptr=(unsigned char *)(nvm_ptr = &(ptlv_header->tlv.nvm)), nvm_index=0; nvm_index < nvm_length ; nvm_ptr = (tlv_nvm_hdr *) nvm_byte_ptr) { fprintf(stderr, "TAG ID\t\t\t : %d\n", nvm_ptr->tag_id); fprintf(stderr, "TAG Length\t\t\t : %d\n", nvm_tag_len = nvm_ptr->tag_len); fprintf(stderr, "TAG Pointer\t\t\t : %d\n", nvm_ptr->tag_ptr); fprintf(stderr, "TAG Extended Flag\t\t : %d\n", nvm_ptr->tag_ex_flag); /* Increase nvm_index to NVM data */ nvm_index+=sizeof(tlv_nvm_hdr); nvm_byte_ptr+=sizeof(tlv_nvm_hdr); /* Write BD Address */ if(nvm_ptr->tag_id == TAG_NUM_2 && read_bd_address(&bdaddr) == 0) { memcpy(nvm_byte_ptr, bdaddr, 6); fprintf(stderr, "Overriding default BD ADDR with user" " programmed BD Address: %02x:%02x:%02x:%02x:%02x:%02x\n", *nvm_byte_ptr, *(nvm_byte_ptr+1), *(nvm_byte_ptr+2), *(nvm_byte_ptr+3), *(nvm_byte_ptr+4), *(nvm_byte_ptr+5)); } if (nvm_ptr->tag_id == TAG_NUM_17) { if ((ibs_value = get_value_from_config(FW_CONFIG_FILE_PATH, "IBS")) >= 0) { if (ibs_value == FWCONF_IBS_DISABLE) { nvm_byte_ptr[FWCONF_IBS_VAL_OFFSET] &= (~(FWCONF_IBS_ENABLE << FWCONF_IBS_VAL_BIT)); } else if (ibs_value == FWCONF_IBS_ENABLE) { nvm_byte_ptr[FWCONF_IBS_VAL_OFFSET] |= (FWCONF_IBS_ENABLE << FWCONF_IBS_VAL_BIT); } } } if (nvm_ptr->tag_id == TAG_NUM_27) { if ((deep_sleep_value = get_value_from_config(FW_CONFIG_FILE_PATH, "DEEP_SLEEP")) >= 0) { if (deep_sleep_value == FWCONF_DEEP_SLEEP_DISABLE) { nvm_byte_ptr[FWCONF_DEEP_SLEEP_BYTE_OFFSET] &= (~(1 << FWCONF_DEEP_SLEEP_BIT_OFFSET)); } else if (deep_sleep_value == FWCONF_DEEP_SLEEP_ENABLE) { nvm_byte_ptr[FWCONF_DEEP_SLEEP_BYTE_OFFSET] |= (1 << FWCONF_DEEP_SLEEP_BIT_OFFSET); } else { fprintf(stderr, "Ignoring invalid deep sleep config value\n"); } } } /* Read from file and check what PCM Configuration is required: * Master = 0 /Slave = 1 */ /* Override PCM configuration */ if (nvm_ptr->tag_id == TAG_NUM_44) { if ((pcm_value = get_value_from_config(FW_CONFIG_FILE_PATH, "PCM")) >= 0) { if (pcm_value == FWCONF_PCM_SLAVE) { nvm_byte_ptr[FWCONF_PCM_MS_OFFSET_1] |= (1 << FWCONF_PCM_ROLE_BIT_OFFSET); nvm_byte_ptr[FWCONF_PCM_MS_OFFSET_2] |= (1 << FWCONF_PCM_ROLE_BIT_OFFSET); } else if (pcm_value == FWCONF_PCM_MASTER) { nvm_byte_ptr[FWCONF_PCM_MS_OFFSET_1] &= (~(1 << FWCONF_PCM_ROLE_BIT_OFFSET)); nvm_byte_ptr[FWCONF_PCM_MS_OFFSET_2] &= (~(1 << FWCONF_PCM_ROLE_BIT_OFFSET)); } } } for(i =0;(itag_len && (i*3 + 2) < PRINT_BUF_SIZE);i++) snprintf((char *) data_buf, PRINT_BUF_SIZE, "%s%.02x ", (char *)data_buf, *(nvm_byte_ptr + i)); fprintf(stderr, "TAG Data\t\t\t : %s\n", data_buf); /* Clear buffer */ memset(data_buf, 0x0, PRINT_BUF_SIZE); /* increased by tag_len */ nvm_index+=nvm_ptr->tag_len; nvm_byte_ptr +=nvm_ptr->tag_len; } fprintf(stderr, "====================================================\n"); } else { fprintf(stderr, "TLV Header type is unknown (%d) \n", ptlv_header->tlv_type); } return readSize; } int rome_tlv_dnld_segment(int fd, int index, int seg_size, unsigned char wait_cc_evt) { int size=0, err = -1; unsigned char cmd[HCI_MAX_CMD_SIZE]; unsigned char rsp[HCI_MAX_EVENT_SIZE]; fprintf(stderr, "%s: Downloading TLV Patch segment no.%d, size:%d wait_cc_evt = 0x%x\n", __FUNCTION__, index, seg_size, wait_cc_evt); /* Frame the HCI CMD PKT to be sent to Controller*/ frame_hci_cmd_pkt(cmd, EDL_PATCH_TLV_REQ_CMD, 0, index, seg_size); /* Total length of the packet to be sent to the Controller */ size = (HCI_CMD_IND + HCI_COMMAND_HDR_SIZE + cmd[PLEN]); /* Initialize the RSP packet everytime to 0 */ memset(rsp, 0x0, HCI_MAX_EVENT_SIZE); /* Send HCI Command packet to Controller */ err = hci_send_vs_cmd(fd, (unsigned char *)cmd, rsp, size); if ( err != size) { fprintf(stderr, "Failed to send the patch payload to the Controller! 0x%x\n", err); return err; } if(wait_cc_evt) { err = read_hci_event(fd, rsp, HCI_MAX_EVENT_SIZE); if ( err < 0) { fprintf(stderr, "%s: Failed to downlaod patch segment: %d!\n", __FUNCTION__, index); return err; } } fprintf(stderr, "%s: Successfully downloaded patch segment: %d\n", __FUNCTION__, index); return err; } int rome_tlv_dnld_req(int fd, int tlv_size) { int total_segment, remain_size, i, err = -1; unsigned char wait_cc_evt = FALSE; unsigned int rom = rome_ver >> 16; total_segment = tlv_size/MAX_SIZE_PER_TLV_SEGMENT; remain_size = (tlv_size < MAX_SIZE_PER_TLV_SEGMENT)?\ tlv_size: (tlv_size%MAX_SIZE_PER_TLV_SEGMENT); fprintf(stderr, "%s: TLV size: %d, Total Seg num: %d, remain size: %d\n", __FUNCTION__,tlv_size, total_segment, remain_size); if (gTlv_type == TLV_TYPE_PATCH) { /* Prior to Rome version 3.2(including inital few rampatch release of * Rome 3.2), the event handling mechanism is ROME_SKIP_EVT_NONE. After * few release of rampatch for Rome 3.2, the mechamism is changed to * ROME_SKIP_EVT_VSE_CC. Rest of the mechanism is not used for now */ switch(gtlv_dwndcfg) { case ROME_SKIP_EVT_NONE: wait_vsc_evt = TRUE; wait_cc_evt = TRUE; fprintf(stderr, "%s: Event handling type: ROME_SKIP_EVT_NONE", __func__); break; case ROME_SKIP_EVT_VSE_CC: wait_vsc_evt = FALSE; wait_cc_evt = FALSE; fprintf(stderr, "%s: Event handling type: ROME_SKIP_EVT_VSE_CC", __func__); break; /* Not handled for now */ case ROME_SKIP_EVT_VSE: case ROME_SKIP_EVT_CC: default: fprintf(stderr, "%s: Unsupported Event handling: %d", __func__, gtlv_dwndcfg); break; } } else { wait_vsc_evt = TRUE; wait_cc_evt = TRUE; } for(i = 0; i < total_segment; i++) { if((i+1) == total_segment) { if ((rom >= ROME_PATCH_VER_0100) && (rom < ROME_PATCH_VER_0302) && (gTlv_type == TLV_TYPE_PATCH)) { /* If the Rome version is from 1.1 to 3.1 * 1. No CCE for the last command segment but all other segment * 2. All the command segments get VSE including the last one */ wait_cc_evt = !remain_size ? FALSE: TRUE; } else if ((rom == ROME_PATCH_VER_0302) && (gTlv_type == TLV_TYPE_PATCH)) { /* If the Rome version is 3.2 * 1. None of the command segments receive CCE * 2. No command segments receive VSE except the last one * 3. If gtlv_dwndcfg is ROME_SKIP_EVT_NONE then the logic is * same as Rome 2.1, 2.2, 3.0 */ if (gtlv_dwndcfg == ROME_SKIP_EVT_NONE) { wait_cc_evt = !remain_size ? FALSE: TRUE; } else if (gtlv_dwndcfg == ROME_SKIP_EVT_VSE_CC) { wait_vsc_evt = !remain_size ? TRUE: FALSE; } } } if((err = rome_tlv_dnld_segment(fd, i, MAX_SIZE_PER_TLV_SEGMENT, wait_cc_evt )) < 0) goto error; } if ((rom >= ROME_PATCH_VER_0100) && (rom < ROME_PATCH_VER_0302) && (gTlv_type == TLV_TYPE_PATCH)) { /* If the Rome version is from 1.1 to 3.1 * 1. No CCE for the last command segment but all other segment * 2. All the command segments get VSE including the last one */ wait_cc_evt = remain_size ? FALSE: TRUE; } else if ((rom == ROME_PATCH_VER_0302) && (gTlv_type == TLV_TYPE_PATCH)) { /* If the Rome version is 3.2 * 1. None of the command segments receive CCE * 2. No command segments receive VSE except the last one * 3. If gtlv_dwndcfg is ROME_SKIP_EVT_NONE then the logic is * same as Rome 2.1, 2.2, 3.0 */ if (gtlv_dwndcfg == ROME_SKIP_EVT_NONE) { wait_cc_evt = remain_size ? FALSE: TRUE; } else if (gtlv_dwndcfg == ROME_SKIP_EVT_VSE_CC) { wait_vsc_evt = remain_size ? TRUE: FALSE; } } if(remain_size) err =rome_tlv_dnld_segment(fd, i, remain_size, wait_cc_evt); error: return err; } int rome_download_tlv_file(int fd) { int tlv_size, err = -1; /* Rampatch TLV file Downloading */ pdata_buffer = NULL; if((tlv_size = rome_get_tlv_file(rampatch_file_path)) < 0) goto error; if((err =rome_tlv_dnld_req(fd, tlv_size)) <0 ) goto error; if (pdata_buffer != NULL){ free (pdata_buffer); pdata_buffer = NULL; } /* NVM TLV file Downloading */ if((tlv_size = rome_get_tlv_file(nvm_file_path)) < 0) goto error; if((err =rome_tlv_dnld_req(fd, tlv_size)) <0 ) goto error; error: if (pdata_buffer != NULL) free (pdata_buffer); return err; } int rome_1_0_nvm_tag_dnld(int fd) { int i, size, err = 0; unsigned char rsp[HCI_MAX_EVENT_SIZE]; #if (NVM_VERSION >= ROME_1_0_100019) unsigned char cmds[MAX_TAG_CMD][HCI_MAX_CMD_SIZE] = { /* Tag 2 */ /* BD Address */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 9, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 2, /* Tag Len */ 6, /* Tag Value */ 0x77,0x78,0x23,0x01,0x56,0x22 }, /* Tag 6 */ /* Bluetooth Support Features */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 11, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 6, /* Tag Len */ 8, /* Tag Value */ 0xFF,0xFE,0x8B,0xFE,0xD8,0x3F,0x5B,0x8B }, /* Tag 17 */ /* HCI Transport Layer Setting */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 11, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 17, /* Tag Len */ 8, /* Tag Value */ 0x82,0x01,0x0E,0x08,0x04,0x32,0x0A,0x00 }, /* Tag 35 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 58, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 35, /* Tag Len */ 55, /* Tag Value */ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x58, 0x59, 0x0E, 0x0E, 0x16, 0x16, 0x16, 0x1E, 0x26, 0x5F, 0x2F, 0x5F, 0x0E, 0x0E, 0x16, 0x16, 0x16, 0x1E, 0x26, 0x5F, 0x2F, 0x5F, 0x0C, 0x18, 0x14, 0x24, 0x40, 0x4C, 0x70, 0x80, 0x80, 0x80, 0x0C, 0x18, 0x14, 0x24, 0x40, 0x4C, 0x70, 0x80, 0x80, 0x80, 0x1B, 0x14, 0x01, 0x04, 0x48 }, /* Tag 36 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 15, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 36, /* Tag Len */ 12, /* Tag Value */ 0x0F,0x00,0x03,0x03,0x03,0x03,0x00,0x00,0x03,0x03,0x04,0x00 }, /* Tag 39 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 7, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 39, /* Tag Len */ 4, /* Tag Value */ 0x12,0x00,0x00,0x00 }, /* Tag 41 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 91, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 41, /* Tag Len */ 88, /* Tag Value */ 0x15, 0x00, 0x00, 0x00, 0xF6, 0x02, 0x00, 0x00, 0x76, 0x00, 0x1E, 0x00, 0x29, 0x02, 0x1F, 0x00, 0x61, 0x00, 0x1A, 0x00, 0x76, 0x00, 0x1E, 0x00, 0x7D, 0x00, 0x40, 0x00, 0x91, 0x00, 0x06, 0x00, 0x92, 0x00, 0x03, 0x00, 0xA6, 0x01, 0x50, 0x00, 0xAA, 0x01, 0x15, 0x00, 0xAB, 0x01, 0x0A, 0x00, 0xAC, 0x01, 0x00, 0x00, 0xB0, 0x01, 0xC5, 0x00, 0xB3, 0x01, 0x03, 0x00, 0xB4, 0x01, 0x13, 0x00, 0xB5, 0x01, 0x0C, 0x00, 0xC5, 0x01, 0x0D, 0x00, 0xC6, 0x01, 0x10, 0x00, 0xCA, 0x01, 0x2B, 0x00, 0xCB, 0x01, 0x5F, 0x00, 0xCC, 0x01, 0x48, 0x00 }, /* Tag 42 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 63, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 42, /* Tag Len */ 60, /* Tag Value */ 0xD7, 0xC0, 0x00, 0x00, 0x8F, 0x5C, 0x02, 0x00, 0x80, 0x47, 0x60, 0x0C, 0x70, 0x4C, 0x00, 0x00, 0x00, 0x01, 0x1F, 0x01, 0x42, 0x01, 0x69, 0x01, 0x95, 0x01, 0xC7, 0x01, 0xFE, 0x01, 0x3D, 0x02, 0x83, 0x02, 0xD1, 0x02, 0x29, 0x03, 0x00, 0x0A, 0x10, 0x00, 0x1F, 0x00, 0x3F, 0x00, 0x7F, 0x00, 0xFD, 0x00, 0xF9, 0x01, 0xF1, 0x03, 0xDE, 0x07, 0x00, 0x00, 0x9A, 0x01 }, /* Tag 84 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 153, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 84, /* Tag Len */ 150, /* Tag Value */ 0x7C, 0x6A, 0x59, 0x47, 0x19, 0x36, 0x35, 0x25, 0x25, 0x28, 0x2C, 0x2B, 0x2B, 0x28, 0x2C, 0x28, 0x29, 0x28, 0x29, 0x28, 0x29, 0x29, 0x2C, 0x29, 0x2C, 0x29, 0x2C, 0x28, 0x29, 0x28, 0x29, 0x28, 0x29, 0x2A, 0x00, 0x00, 0x2C, 0x2A, 0x2C, 0x18, 0x98, 0x98, 0x98, 0x98, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x13, 0x1E, 0x1E, 0x1E, 0x1E, 0x13, 0x13, 0x11, 0x13, 0x1E, 0x1E, 0x13, 0x12, 0x12, 0x12, 0x11, 0x12, 0x1F, 0x12, 0x12, 0x12, 0x10, 0x0C, 0x18, 0x0D, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x0C, 0x01, 0x01, 0x01, 0x01, 0x0D, 0x0D, 0x0E, 0x0D, 0x01, 0x01, 0x0D, 0x0D, 0x0D, 0x0D, 0x0F, 0x0D, 0x10, 0x0D, 0x0D, 0x0D, 0x0D, 0x10, 0x05, 0x10, 0x03, 0x00, 0x7E, 0x7B, 0x7B, 0x72, 0x71, 0x50, 0x50, 0x50, 0x00, 0x40, 0x60, 0x60, 0x30, 0x08, 0x02, 0x0F, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x16, 0x16, 0x08, 0x08, 0x00, 0x00, 0x00, 0x1E, 0x34, 0x2B, 0x1B, 0x23, 0x2B, 0x15, 0x0D }, /* Tag 85 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 119, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 85, /* Tag Len */ 116, /* Tag Value */ 0x03, 0x00, 0x38, 0x00, 0x45, 0x77, 0x00, 0xE8, 0x00, 0x59, 0x01, 0xCA, 0x01, 0x3B, 0x02, 0xAC, 0x02, 0x1D, 0x03, 0x8E, 0x03, 0x00, 0x89, 0x01, 0x0E, 0x02, 0x5C, 0x02, 0xD7, 0x02, 0xF8, 0x08, 0x01, 0x00, 0x1F, 0x00, 0x0A, 0x02, 0x55, 0x02, 0x00, 0x35, 0x00, 0x00, 0x00, 0x00, 0x2A, 0xD7, 0x00, 0x00, 0x00, 0x1E, 0xDE, 0x00, 0x00, 0x00, 0x14, 0x0F, 0x0A, 0x0F, 0x0A, 0x0C, 0x0C, 0x0C, 0x0C, 0x04, 0x04, 0x04, 0x0C, 0x0C, 0x0C, 0x0C, 0x06, 0x06, 0x00, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01, 0x00, 0x02, 0x02, 0x02, 0x02, 0x01, 0x00, 0x00, 0x00, 0x06, 0x0F, 0x14, 0x05, 0x47, 0xCF, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xAC, 0x7C, 0xFF, 0x40, 0x00, 0x00, 0x00, 0x12, 0x04, 0x04, 0x01, 0x04, 0x03 }, {TAG_END} }; #elif (NVM_VERSION == ROME_1_0_6002) unsigned char cmds[MAX_TAG_CMD][HCI_MAX_CMD_SIZE] = { /* Tag 2 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 9, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 2, /* Tag Len */ 6, /* Tag Value */ 0x77,0x78,0x23,0x01,0x56,0x22 /* BD Address */ }, /* Tag 6 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 11, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 6, /* Tag Len */ 8, /* Tag Value */ 0xFF,0xFE,0x8B,0xFE,0xD8,0x3F,0x5B,0x8B }, /* Tag 17 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 11, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 17, /* Tag Len */ 8, /* Tag Value */ 0x82,0x01,0x0E,0x08,0x04,0x32,0x0A,0x00 }, /* Tag 36 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 15, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 36, /* Tag Len */ 12, /* Tag Value */ 0x0F,0x00,0x03,0x03,0x03,0x03,0x00,0x00,0x03,0x03,0x04,0x00 }, /* Tag 39 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 7, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 39, /* Tag Len */ 4, /* Tag Value */ 0x12,0x00,0x00,0x00 }, /* Tag 41 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 199, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 41, /* Tag Len */ 196, /* Tag Value */ 0x30,0x00,0x00,0x00,0xD5,0x00,0x0E,0x00,0xD6,0x00,0x0E,0x00, 0xD7,0x00,0x16,0x00,0xD8,0x00,0x16,0x00,0xD9,0x00,0x16,0x00, 0xDA,0x00,0x1E,0x00,0xDB,0x00,0x26,0x00,0xDC,0x00,0x5F,0x00, 0xDD,0x00,0x2F,0x00,0xDE,0x00,0x5F,0x00,0xE0,0x00,0x0E,0x00, 0xE1,0x00,0x0E,0x00,0xE2,0x00,0x16,0x00,0xE3,0x00,0x16,0x00, 0xE4,0x00,0x16,0x00,0xE5,0x00,0x1E,0x00,0xE6,0x00,0x26,0x00, 0xE7,0x00,0x5F,0x00,0xE8,0x00,0x2F,0x00,0xE9,0x00,0x5F,0x00, 0xEC,0x00,0x0C,0x00,0xED,0x00,0x08,0x00,0xEE,0x00,0x14,0x00, 0xEF,0x00,0x24,0x00,0xF0,0x00,0x40,0x00,0xF1,0x00,0x4C,0x00, 0xF2,0x00,0x70,0x00,0xF3,0x00,0x80,0x00,0xF4,0x00,0x80,0x00, 0xF5,0x00,0x80,0x00,0xF8,0x00,0x0C,0x00,0xF9,0x00,0x18,0x00, 0xFA,0x00,0x14,0x00,0xFB,0x00,0x24,0x00,0xFC,0x00,0x40,0x00, 0xFD,0x00,0x4C,0x00,0xFE,0x00,0x70,0x00,0xFF,0x00,0x80,0x00, 0x00,0x01,0x80,0x00,0x01,0x01,0x80,0x00,0x04,0x01,0x1B,0x00, 0x05,0x01,0x14,0x00,0x06,0x01,0x01,0x00,0x07,0x01,0x04,0x00, 0x08,0x01,0x00,0x00,0x09,0x01,0x00,0x00,0x0A,0x01,0x03,0x00, 0x0B,0x01,0x03,0x00 }, /* Tag 44 */ { /* Packet Type */HCI_COMMAND_PKT, /* Opcode */ 0x0b,0xfc, /* Total Len */ 44, /* NVM CMD */ NVM_ACCESS_SET, /* Tag Num */ 44, /* Tag Len */ 41, /* Tag Value */ 0x6F,0x0A,0x00,0x00,0x00,0x00,0x00,0x50,0xFF,0x10,0x02,0x02, 0x01,0x00,0x14,0x01,0x06,0x28,0xA0,0x62,0x03,0x64,0x01,0x01, 0x0A,0x00,0x00,0x00,0x00,0x00,0x00,0xA0,0xFF,0x10,0x02,0x01, 0x00,0x14,0x01,0x02,0x03 }, {TAG_END} }; #endif fprintf(stderr, "%s: Start sending NVM Tags (ver: 0x%x)\n", __FUNCTION__, (unsigned int) NVM_VERSION); for (i=0; (i < MAX_TAG_CMD) && (cmds[i][0] != TAG_END); i++) { /* Write BD Address */ if(cmds[i][TAG_NUM_OFFSET] == TAG_NUM_2){ memcpy(&cmds[i][TAG_BDADDR_OFFSET], vnd_local_bd_addr, 6); fprintf(stderr, "BD Address: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", cmds[i][TAG_BDADDR_OFFSET ], cmds[i][TAG_BDADDR_OFFSET + 1], cmds[i][TAG_BDADDR_OFFSET + 2], cmds[i][TAG_BDADDR_OFFSET + 3], cmds[i][TAG_BDADDR_OFFSET + 4], cmds[i][TAG_BDADDR_OFFSET + 5]); } size = cmds[i][3] + HCI_COMMAND_HDR_SIZE + 1; /* Send HCI Command packet to Controller */ err = hci_send_vs_cmd(fd, (unsigned char *)&cmds[i][0], rsp, size); if ( err != size) { fprintf(stderr, "Failed to attach the patch payload to the Controller!\n"); goto error; } /* Read Command Complete Event - This is extra routine for ROME 1.0. From ROM 2.0, it should be removed. */ err = read_hci_event(fd, rsp, HCI_MAX_EVENT_SIZE); if ( err < 0) { fprintf(stderr, "%s: Failed to get patch version(s)\n", __FUNCTION__); goto error; } } error: return err; } int rome_patch_ver_req(int fd) { int size, err = 0; unsigned char cmd[HCI_MAX_CMD_SIZE]; unsigned char rsp[HCI_MAX_EVENT_SIZE]; /* Frame the HCI CMD to be sent to the Controller */ frame_hci_cmd_pkt(cmd, EDL_PATCH_VER_REQ_CMD, 0, -1, EDL_PATCH_CMD_LEN); /* Total length of the packet to be sent to the Controller */ size = (HCI_CMD_IND + HCI_COMMAND_HDR_SIZE + EDL_PATCH_CMD_LEN); /* Send HCI Command packet to Controller */ err = hci_send_vs_cmd(fd, (unsigned char *)cmd, rsp, size); if ( err != size) { fprintf(stderr, "Failed to attach the patch payload to the Controller!\n"); goto error; } /* Read Command Complete Event - This is extra routine for ROME 1.0. From ROM 2.0, it should be removed. */ err = read_hci_event(fd, rsp, HCI_MAX_EVENT_SIZE); if ( err < 0) { fprintf(stderr, "%s: Failed to get patch version(s)\n", __FUNCTION__); goto error; } error: return err; } static void flow_control(int fd, int opt) { struct termios c_opt; ioctl(fd, TIOCMGET, &c_opt); c_opt.c_cc[VTIME] = 0; /* inter-character timer unused */ c_opt.c_cc[VMIN] = 0; /* blocking read until 8 chars received */ c_opt.c_cflag &= ~CSIZE; c_opt.c_cflag |= (CS8 | CLOCAL | CREAD); if (opt == MSM_ENABLE_FLOW_CTRL) c_opt.c_cflag |= CRTSCTS; else if (opt == MSM_DISABLE_FLOW_CTRL) c_opt.c_cflag &= ~CRTSCTS; else { fprintf(stderr, "%s: Incorrect option passed for TIOCMSET\n", __func__); return; } c_opt.c_iflag = IGNPAR; c_opt.c_oflag = 0; c_opt.c_lflag = 0; ioctl(fd, TIOCMSET, &c_opt); } int rome_set_baudrate_req(int fd, int local_baud_rate, int controller_baud_rate) { int size, err = 0; unsigned char cmd[HCI_MAX_CMD_SIZE]; unsigned char rsp[HCI_MAX_EVENT_SIZE]; hci_command_hdr *cmd_hdr; int flags; memset(cmd, 0x0, HCI_MAX_CMD_SIZE); cmd_hdr = (void *) (cmd + 1); cmd[0] = HCI_COMMAND_PKT; cmd_hdr->opcode = cmd_opcode_pack(HCI_VENDOR_CMD_OGF, EDL_SET_BAUDRATE_CMD_OCF); cmd_hdr->plen = VSC_SET_BAUDRATE_REQ_LEN; cmd[4] = controller_baud_rate; /* Total length of the packet to be sent to the Controller */ size = (HCI_CMD_IND + HCI_COMMAND_HDR_SIZE + VSC_SET_BAUDRATE_REQ_LEN); /* Flow off during baudrate change */ flow_control(fd, MSM_DISABLE_FLOW_CTRL); /* Send the HCI command packet to UART for transmission */ fprintf(stderr, "%s: HCI CMD: 0x%x 0x%x 0x%x 0x%x 0x%x\n", __FUNCTION__, cmd[0], cmd[1], cmd[2], cmd[3],cmd[4]) ; err = write(fd, cmd, size); if (err != size) { fprintf(stderr, "%s: Send failed with ret value: %d\n", __FUNCTION__, err); goto error; } /* Change Local UART baudrate to high speed UART */ userial_vendor_set_baud(local_baud_rate); /* Flow on after changing local uart baudrate */ flow_control(fd, MSM_ENABLE_FLOW_CTRL); /* Check for response from the Controller */ if ((err =read_vs_hci_event(fd, rsp, HCI_MAX_EVENT_SIZE)) < 0) { fprintf(stderr, "%s: Failed to get HCI-VS Event from SOC\n", __FUNCTION__); goto error; } fprintf(stderr, "%s: Received HCI-Vendor Specific Event from SOC\n", __FUNCTION__); /* Wait for command complete event */ err = read_hci_event(fd, rsp, HCI_MAX_EVENT_SIZE); if ( err < 0) { fprintf(stderr, "%s: Failed to set patch info on Controller\n", __FUNCTION__); goto error; } fprintf(stderr, "%s\n", __FUNCTION__); error: return err; } int rome_hci_reset_req(int fd, char baud) { int size, err = 0; unsigned char cmd[HCI_MAX_CMD_SIZE]; unsigned char rsp[HCI_MAX_EVENT_SIZE]; hci_command_hdr *cmd_hdr; int flags; fprintf(stderr, "%s: HCI RESET \n", __FUNCTION__); memset(cmd, 0x0, HCI_MAX_CMD_SIZE); cmd_hdr = (void *) (cmd + 1); cmd[0] = HCI_COMMAND_PKT; cmd_hdr->opcode = HCI_RESET; cmd_hdr->plen = 0; /* Total length of the packet to be sent to the Controller */ size = (HCI_CMD_IND + HCI_COMMAND_HDR_SIZE); /* Flow off during baudrate change */ flow_control(fd, MSM_DISABLE_FLOW_CTRL); /* Send the HCI command packet to UART for transmission */ fprintf(stderr, "%s: HCI CMD: 0x%x 0x%x 0x%x 0x%x\n", __FUNCTION__, cmd[0], cmd[1], cmd[2], cmd[3]); err = write(fd, cmd, size); if (err != size) { fprintf(stderr, "%s: Send failed with ret value: %d\n", __FUNCTION__, err); goto error; } /* Change Local UART baudrate to high speed UART */ userial_vendor_set_baud(baud); /* Flow on after changing local uart baudrate */ flow_control(fd, MSM_ENABLE_FLOW_CTRL); /* Wait for command complete event */ err = read_hci_event(fd, rsp, HCI_MAX_EVENT_SIZE); if ( err < 0) { fprintf(stderr, "%s: Failed to set patch info on Controller\n", __FUNCTION__); goto error; } error: return err; } int read_bd_address(unsigned char *bdaddr) { int fd = -1; int readPtr = 0; unsigned char data[BD_ADDR_LEN]; /* Open the persist file for reading device address*/ fd = open("/etc/bluetooth/.bt_nv.bin", O_RDONLY); if(fd < 0) { fprintf(stderr, "%s: Open failed: Programming default BD ADDR\n", __func__); return -1; } /* Read the NVM Header : fp will be advanced by readPtr number of bytes */ readPtr = read(fd, data, PERSIST_HEADER_LEN); if (readPtr > 0) fprintf(stderr, "%s: Persist header data: %02x \t %02x \t %02x\n", __func__, data[NVITEM], data[RDWR_PROT], data[NVITEM_SIZE]); else { fprintf(stderr, "%s: Read from persist memory failed : Programming default" " BD ADDR\n"); close(fd); return -1; } /* Check for BD ADDR length before programming */ if(data[NVITEM_SIZE] != BD_ADDR_LEN) { fprintf(stderr, "Invalid BD ADDR: Programming default BD ADDR!\n"); close(fd); return -1; } /* Read the BD ADDR info */ readPtr = read(fd, data, BD_ADDR_LEN); if (readPtr > 0) fprintf(stderr, "BD-ADDR: ==> %02x:%02x:%02x:%02x:%02x:%02x\n", data[0], data[1], data[2], data[3], data[4], data[5]); else { fprintf(stderr, "%s: Read from persist memory failed : Programming default" " BD ADDR\n"); close(fd); return -1; } memcpy(bdaddr, data, BD_ADDR_LEN); close(fd); return 0; } int isSpeedValid(int speed, int *local_baud_rate, int *controller_baud_rate) { switch(speed) { case 9600: *local_baud_rate = USERIAL_BAUD_9600; *controller_baud_rate = BAUDRATE_9600; break; case 19200: *local_baud_rate = USERIAL_BAUD_19200; *controller_baud_rate = BAUDRATE_19200; break; case 57600: *local_baud_rate = USERIAL_BAUD_57600; *controller_baud_rate = BAUDRATE_57600; break; case 115200: *local_baud_rate = USERIAL_BAUD_115200; *controller_baud_rate = BAUDRATE_115200; break; case 230400: *local_baud_rate = USERIAL_BAUD_230400; *controller_baud_rate = BAUDRATE_230400; break; case 460800: *local_baud_rate = USERIAL_BAUD_460800; *controller_baud_rate = BAUDRATE_460800; break; case 921600: *local_baud_rate = USERIAL_BAUD_921600; *controller_baud_rate = BAUDRATE_921600; break; case 1000000: *local_baud_rate = USERIAL_BAUD_1M; *controller_baud_rate = BAUDRATE_1000000; break; case 2000000: *local_baud_rate = USERIAL_BAUD_2M; *controller_baud_rate = BAUDRATE_2000000; break; case 3000000: *local_baud_rate = USERIAL_BAUD_3M; *controller_baud_rate = BAUDRATE_3000000; break; case 4000000: *local_baud_rate = USERIAL_BAUD_4M; *controller_baud_rate = BAUDRATE_4000000; break; case 300: case 600: case 1200: case 2400: default: fprintf(stderr, "Invalid baud rate passed!\n"); *local_baud_rate = *controller_baud_rate = -1; break; } return -1; } int qca_soc_init(int fd, int speed, char *bdaddr) { int err = -1; int ret = 0; int size, local_baud_rate = 0, controller_baud_rate = 0; vnd_userial.fd = fd; #ifdef _PLATFORM_MDM_ /* Vote for UART CLK prior to FW download */ err = ioctl(fd, USERIAL_OP_CLK_ON); if (err < 0) { fprintf(stderr, "%s: Failed to vote UART CLK ON\n", __func__); return -1; } #endif /* Get Rome version information */ if((err = rome_patch_ver_req(fd)) <0){ fprintf(stderr, "%s: Fail to get Rome Version (0x%x)\n", __FUNCTION__, err); ret = -1; goto error; } fprintf(stderr, "%s: Rome Version (0x%08x)\n", __FUNCTION__, rome_ver); switch (rome_ver){ case ROME_VER_1_0: { /* Set and Download the RAMPATCH */ fprintf(stderr, "%s: Setting Patch Header & Downloading Patches\n", __FUNCTION__); err = rome_download_rampatch(fd); if (err < 0) { fprintf(stderr, "%s: DOWNLOAD RAMPATCH failed!\n", __FUNCTION__); ret = -1; goto error; } fprintf(stderr, "%s: DOWNLOAD RAMPTACH complete\n", __FUNCTION__); /* Attach the RAMPATCH */ fprintf(stderr, "%s: Attaching the patches\n", __FUNCTION__); err = rome_attach_rampatch(fd); if (err < 0) { fprintf(stderr, "%s: ATTACH RAMPATCH failed!\n", __FUNCTION__); ret = -1; goto error; } fprintf(stderr, "%s: ATTACH RAMPTACH complete\n", __FUNCTION__); /* Send Reset */ size = (HCI_CMD_IND + HCI_COMMAND_HDR_SIZE + EDL_PATCH_CMD_LEN); err = rome_rampatch_reset(fd); if ( err < 0 ) { fprintf(stderr, "Failed to RESET after RAMPATCH upgrade!\n"); ret = -1; goto error; } /* NVM download */ fprintf(stderr, "%s: Downloading NVM\n", __FUNCTION__); err = rome_1_0_nvm_tag_dnld(fd); if ( err <0 ) { fprintf(stderr, "Downloading NVM Failed !!\n"); ret = -1; goto error; } /* Change baud rate 115.2 kbps to 3Mbps*/ err = rome_hci_reset_req(fd, local_baud_rate); if ( err <0 ) { fprintf(stderr, "HCI Reset Failed !!\n"); ret = -1; goto error; } fprintf(stderr, "HCI Reset is done\n"); } break; case ROME_VER_1_1: rampatch_file_path = ROME_RAMPATCH_TLV_PATH; nvm_file_path = ROME_NVM_TLV_PATH; goto download; case ROME_VER_1_3: rampatch_file_path = ROME_RAMPATCH_TLV_1_0_3_PATH; nvm_file_path = ROME_NVM_TLV_1_0_3_PATH; goto download; case ROME_VER_2_1: rampatch_file_path = ROME_RAMPATCH_TLV_2_0_1_PATH; nvm_file_path = ROME_NVM_TLV_2_0_1_PATH; goto download; case ROME_VER_3_0: rampatch_file_path = ROME_RAMPATCH_TLV_3_0_0_PATH; nvm_file_path = ROME_NVM_TLV_3_0_0_PATH; goto download; case ROME_VER_3_2: rampatch_file_path = ROME_RAMPATCH_TLV_3_0_2_PATH; nvm_file_path = ROME_NVM_TLV_3_0_2_PATH; goto download; case TUFELLO_VER_1_0: rampatch_file_path = TF_RAMPATCH_TLV_1_0_0_PATH; nvm_file_path = TF_NVM_TLV_1_0_0_PATH; goto download; case TUFELLO_VER_1_1: rampatch_file_path = TF_RAMPATCH_TLV_1_0_1_PATH; nvm_file_path = TF_NVM_TLV_1_0_1_PATH; download: /* Check if user requested for 115200 kbps */ if (speed == 115200) { local_baud_rate = USERIAL_BAUD_115200; controller_baud_rate = BAUDRATE_115200; } else { /* Change only if baud rate requested is valid or not */ isSpeedValid(speed, &local_baud_rate, &controller_baud_rate); if (local_baud_rate < 0 || controller_baud_rate < 0) { ret = -1; goto error; } err = rome_set_baudrate_req(fd, local_baud_rate, controller_baud_rate); if (err < 0) { fprintf(stderr, "%s: Baud rate change failed!\n", __FUNCTION__); ret = -1; goto error; } } /* Donwload TLV files (rampatch, NVM) */ err = rome_download_tlv_file(fd); if (err < 0) { fprintf(stderr, "%s: Download TLV file failed!\n", __FUNCTION__); ret = -1; goto error; } fprintf(stderr, "%s: Download TLV file successfully \n", __FUNCTION__); /* * Overriding the baud rate value in NVM file with the user * requested baud rate, since default baud rate in NVM file is 3M. */ err = rome_set_baudrate_req(fd, local_baud_rate, controller_baud_rate); if (err < 0) { fprintf(stderr, "%s: Baud rate change failed!\n", __FUNCTION__); ret = -1; goto error; } /* Perform HCI reset here*/ err = rome_hci_reset_req(fd, local_baud_rate); if ( err <0 ) { fprintf(stderr, "HCI Reset Failed !!!\n"); ret = -1; goto error; } fprintf(stderr, "HCI Reset is done\n"); break; case ROME_VER_UNKNOWN: default: fprintf(stderr, "%s: Detected unknown ROME version\n", __FUNCTION__); ret = -1; break; } error: #ifdef _PLATFORM_MDM_ /* Vote UART CLK OFF post to FW download */ err = ioctl(fd, USERIAL_OP_CLK_OFF); if (err < 0) { fprintf(stderr, "%s: Failed to vote UART CLK OFF!!!\n", __func__); return -1; } #endif return ret; }