M7350v1_en_gpl

kernel/arch/x86/boot/compressed/Makefile

@@ -0,0 +1,76 @@
+#
+# linux/arch/x86/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo head_$(BITS).o misc.o string.o cmdline.o early_serial_console.o piggy.o
+
+KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
+KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
+KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
+cflags-$(CONFIG_X86_32) := -march=i386
+cflags-$(CONFIG_X86_64) := -mcmodel=small
+KBUILD_CFLAGS += $(cflags-y)
+KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
+KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
+
+KBUILD_AFLAGS  := $(KBUILD_CFLAGS) -D__ASSEMBLY__
+GCOV_PROFILE := n
+
+LDFLAGS := -m elf_$(UTS_MACHINE)
+LDFLAGS_vmlinux := -T
+
+hostprogs-y	:= mkpiggy
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include
+
+VMLINUX_OBJS = $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o \
+	$(obj)/string.o $(obj)/cmdline.o $(obj)/early_serial_console.o \
+	$(obj)/piggy.o
+
+ifeq ($(CONFIG_EFI_STUB), y)
+	VMLINUX_OBJS += $(obj)/eboot.o $(obj)/efi_stub_$(BITS).o
+endif
+
+$(obj)/vmlinux: $(VMLINUX_OBJS) FORCE
+	$(call if_changed,ld)
+	@:
+
+OBJCOPYFLAGS_vmlinux.bin :=  -R .comment -S
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+targets += vmlinux.bin.all vmlinux.relocs
+
+CMD_RELOCS = arch/x86/tools/relocs
+quiet_cmd_relocs = RELOCS  $@
+      cmd_relocs = $(CMD_RELOCS) $< > $@;$(CMD_RELOCS) --abs-relocs $<
+$(obj)/vmlinux.relocs: vmlinux FORCE
+	$(call if_changed,relocs)
+
+vmlinux.bin.all-y := $(obj)/vmlinux.bin
+vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs
+
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,lzma)
+$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,xzkern)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,lzo)
+
+suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
+suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
+suffix-$(CONFIG_KERNEL_XZ)	:= xz
+suffix-$(CONFIG_KERNEL_LZO) 	:= lzo
+
+quiet_cmd_mkpiggy = MKPIGGY $@
+      cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
+
+targets += piggy.S
+$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE
+	$(call if_changed,mkpiggy)

kernel/arch/x86/boot/compressed/cmdline.c

@@ -0,0 +1,21 @@
+#include "misc.h"
+
+static unsigned long fs;
+static inline void set_fs(unsigned long seg)
+{
+	fs = seg << 4;  /* shift it back */
+}
+typedef unsigned long addr_t;
+static inline char rdfs8(addr_t addr)
+{
+	return *((char *)(fs + addr));
+}
+#include "../cmdline.c"
+int cmdline_find_option(const char *option, char *buffer, int bufsize)
+{
+	return __cmdline_find_option(real_mode->hdr.cmd_line_ptr, option, buffer, bufsize);
+}
+int cmdline_find_option_bool(const char *option)
+{
+	return __cmdline_find_option_bool(real_mode->hdr.cmd_line_ptr, option);
+}

kernel/arch/x86/boot/compressed/early_serial_console.c

@@ -0,0 +1,5 @@
+#include "misc.h"
+
+int early_serial_base;
+
+#include "../early_serial_console.c"

kernel/arch/x86/boot/compressed/eboot.h

@@ -0,0 +1,61 @@
+#ifndef BOOT_COMPRESSED_EBOOT_H
+#define BOOT_COMPRESSED_EBOOT_H
+
+#define SEG_TYPE_DATA		(0 << 3)
+#define SEG_TYPE_READ_WRITE	(1 << 1)
+#define SEG_TYPE_CODE		(1 << 3)
+#define SEG_TYPE_EXEC_READ	(1 << 1)
+#define SEG_TYPE_TSS		((1 << 3) | (1 << 0))
+#define SEG_OP_SIZE_32BIT	(1 << 0)
+#define SEG_GRANULARITY_4KB	(1 << 0)
+
+#define DESC_TYPE_CODE_DATA	(1 << 0)
+
+#define EFI_PAGE_SIZE		(1UL << EFI_PAGE_SHIFT)
+#define EFI_READ_CHUNK_SIZE	(1024 * 1024)
+
+#define PIXEL_RGB_RESERVED_8BIT_PER_COLOR		0
+#define PIXEL_BGR_RESERVED_8BIT_PER_COLOR		1
+#define PIXEL_BIT_MASK					2
+#define PIXEL_BLT_ONLY					3
+#define PIXEL_FORMAT_MAX				4
+
+struct efi_pixel_bitmask {
+	u32 red_mask;
+	u32 green_mask;
+	u32 blue_mask;
+	u32 reserved_mask;
+};
+
+struct efi_graphics_output_mode_info {
+	u32 version;
+	u32 horizontal_resolution;
+	u32 vertical_resolution;
+	int pixel_format;
+	struct efi_pixel_bitmask pixel_information;
+	u32 pixels_per_scan_line;
+} __packed;
+
+struct efi_graphics_output_protocol_mode {
+	u32 max_mode;
+	u32 mode;
+	unsigned long info;
+	unsigned long size_of_info;
+	u64 frame_buffer_base;
+	unsigned long frame_buffer_size;
+} __packed;
+
+struct efi_graphics_output_protocol {
+	void *query_mode;
+	unsigned long set_mode;
+	unsigned long blt;
+	struct efi_graphics_output_protocol_mode *mode;
+};
+
+struct efi_uga_draw_protocol {
+	void *get_mode;
+	void *set_mode;
+	void *blt;
+};
+
+#endif /* BOOT_COMPRESSED_EBOOT_H */

kernel/arch/x86/boot/compressed/efi_stub_32.S

@@ -0,0 +1,86 @@
+/*
+ * EFI call stub for IA32.
+ *
+ * This stub allows us to make EFI calls in physical mode with interrupts
+ * turned off. Note that this implementation is different from the one in
+ * arch/x86/platform/efi/efi_stub_32.S because we're _already_ in physical
+ * mode at this point.
+ */
+
+#include <linux/linkage.h>
+#include <asm/page_types.h>
+
+/*
+ * efi_call_phys(void *, ...) is a function with variable parameters.
+ * All the callers of this function assure that all the parameters are 4-bytes.
+ */
+
+/*
+ * In gcc calling convention, EBX, ESP, EBP, ESI and EDI are all callee save.
+ * So we'd better save all of them at the beginning of this function and restore
+ * at the end no matter how many we use, because we can not assure EFI runtime
+ * service functions will comply with gcc calling convention, too.
+ */
+
+.text
+ENTRY(efi_call_phys)
+	/*
+	 * 0. The function can only be called in Linux kernel. So CS has been
+	 * set to 0x0010, DS and SS have been set to 0x0018. In EFI, I found
+	 * the values of these registers are the same. And, the corresponding
+	 * GDT entries are identical. So I will do nothing about segment reg
+	 * and GDT, but change GDT base register in prelog and epilog.
+	 */
+
+	/*
+	 * 1. Because we haven't been relocated by this point we need to
+	 * use relative addressing.
+	 */
+	call	1f
+1:	popl	%edx
+	subl	$1b, %edx
+
+	/*
+	 * 2. Now on the top of stack is the return
+	 * address in the caller of efi_call_phys(), then parameter 1,
+	 * parameter 2, ..., param n. To make things easy, we save the return
+	 * address of efi_call_phys in a global variable.
+	 */
+	popl	%ecx
+	movl	%ecx, saved_return_addr(%edx)
+	/* get the function pointer into ECX*/
+	popl	%ecx
+	movl	%ecx, efi_rt_function_ptr(%edx)
+
+	/*
+	 * 3. Call the physical function.
+	 */
+	call	*%ecx
+
+	/*
+	 * 4. Balance the stack. And because EAX contain the return value,
+	 * we'd better not clobber it. We need to calculate our address
+	 * again because %ecx and %edx are not preserved across EFI function
+	 * calls.
+	 */
+	call	1f
+1:	popl	%edx
+	subl	$1b, %edx
+
+	movl	efi_rt_function_ptr(%edx), %ecx
+	pushl	%ecx
+
+	/*
+	 * 10. Push the saved return address onto the stack and return.
+	 */
+	movl	saved_return_addr(%edx), %ecx
+	pushl	%ecx
+	ret
+ENDPROC(efi_call_phys)
+.previous
+
+.data
+saved_return_addr:
+	.long 0
+efi_rt_function_ptr:
+	.long 0

kernel/arch/x86/boot/compressed/efi_stub_64.S

@@ -0,0 +1 @@
+#include "../../platform/efi/efi_stub_64.S"

kernel/arch/x86/boot/compressed/head_32.S

@@ -0,0 +1,225 @@
+/*
+ *  linux/boot/head.S
+ *
+ *  Copyright (C) 1991, 1992, 1993  Linus Torvalds
+ */
+
+/*
+ *  head.S contains the 32-bit startup code.
+ *
+ * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
+ * the page directory will exist. The startup code will be overwritten by
+ * the page directory. [According to comments etc elsewhere on a compressed
+ * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
+ *
+ * Page 0 is deliberately kept safe, since System Management Mode code in
+ * laptops may need to access the BIOS data stored there.  This is also
+ * useful for future device drivers that either access the BIOS via VM86
+ * mode.
+ */
+
+/*
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ */
+	.text
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page_types.h>
+#include <asm/boot.h>
+#include <asm/asm-offsets.h>
+
+	__HEAD
+ENTRY(startup_32)
+#ifdef CONFIG_EFI_STUB
+	jmp	preferred_addr
+
+	.balign	0x10
+	/*
+	 * We don't need the return address, so set up the stack so
+	 * efi_main() can find its arugments.
+	 */
+	add	$0x4, %esp
+
+	call	efi_main
+	cmpl	$0, %eax
+	movl	%eax, %esi
+	jne	2f
+1:
+	/* EFI init failed, so hang. */
+	hlt
+	jmp	1b
+2:
+	call	3f
+3:
+	popl	%eax
+	subl	$3b, %eax
+	subl	BP_pref_address(%esi), %eax
+	add	BP_code32_start(%esi), %eax
+	leal	preferred_addr(%eax), %eax
+	jmp	*%eax
+
+preferred_addr:
+#endif
+	cld
+	/*
+	 * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+	 * us to not reload segments
+	 */
+	testb	$(1<<6), BP_loadflags(%esi)
+	jnz	1f
+
+	cli
+	movl	$__BOOT_DS, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %fs
+	movl	%eax, %gs
+	movl	%eax, %ss
+1:
+
+/*
+ * Calculate the delta between where we were compiled to run
+ * at and where we were actually loaded at.  This can only be done
+ * with a short local call on x86.  Nothing  else will tell us what
+ * address we are running at.  The reserved chunk of the real-mode
+ * data at 0x1e4 (defined as a scratch field) are used as the stack
+ * for this calculation. Only 4 bytes are needed.
+ */
+	leal	(BP_scratch+4)(%esi), %esp
+	call	1f
+1:	popl	%ebp
+	subl	$1b, %ebp
+
+/*
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
+ * contains the address where we should move the kernel image temporarily
+ * for safe in-place decompression.
+ */
+
+#ifdef CONFIG_RELOCATABLE
+	movl	%ebp, %ebx
+	movl	BP_kernel_alignment(%esi), %eax
+	decl	%eax
+	addl    %eax, %ebx
+	notl	%eax
+	andl    %eax, %ebx
+#else
+	movl	$LOAD_PHYSICAL_ADDR, %ebx
+#endif
+
+	/* Target address to relocate to for decompression */
+	addl	$z_extract_offset, %ebx
+
+	/* Set up the stack */
+	leal	boot_stack_end(%ebx), %esp
+
+	/* Zero EFLAGS */
+	pushl	$0
+	popfl
+
+/*
+ * Copy the compressed kernel to the end of our buffer
+ * where decompression in place becomes safe.
+ */
+	pushl	%esi
+	leal	(_bss-4)(%ebp), %esi
+	leal	(_bss-4)(%ebx), %edi
+	movl	$(_bss - startup_32), %ecx
+	shrl	$2, %ecx
+	std
+	rep	movsl
+	cld
+	popl	%esi
+
+/*
+ * Jump to the relocated address.
+ */
+	leal	relocated(%ebx), %eax
+	jmp	*%eax
+ENDPROC(startup_32)
+
+	.text
+relocated:
+
+/*
+ * Clear BSS (stack is currently empty)
+ */
+	xorl	%eax, %eax
+	leal	_bss(%ebx), %edi
+	leal	_ebss(%ebx), %ecx
+	subl	%edi, %ecx
+	shrl	$2, %ecx
+	rep	stosl
+
+/*
+ * Adjust our own GOT
+ */
+	leal	_got(%ebx), %edx
+	leal	_egot(%ebx), %ecx
+1:
+	cmpl	%ecx, %edx
+	jae	2f
+	addl	%ebx, (%edx)
+	addl	$4, %edx
+	jmp	1b
+2:
+
+/*
+ * Do the decompression, and jump to the new kernel..
+ */
+	leal	z_extract_offset_negative(%ebx), %ebp
+				/* push arguments for decompress_kernel: */
+	pushl	%ebp		/* output address */
+	pushl	$z_input_len	/* input_len */
+	leal	input_data(%ebx), %eax
+	pushl	%eax		/* input_data */
+	leal	boot_heap(%ebx), %eax
+	pushl	%eax		/* heap area */
+	pushl	%esi		/* real mode pointer */
+	call	decompress_kernel
+	addl	$20, %esp
+
+#if CONFIG_RELOCATABLE
+/*
+ * Find the address of the relocations.
+ */
+	leal	z_output_len(%ebp), %edi
+
+/*
+ * Calculate the delta between where vmlinux was compiled to run
+ * and where it was actually loaded.
+ */
+	movl	%ebp, %ebx
+	subl	$LOAD_PHYSICAL_ADDR, %ebx
+	jz	2f	/* Nothing to be done if loaded at compiled addr. */
+/*
+ * Process relocations.
+ */
+
+1:	subl	$4, %edi
+	movl	(%edi), %ecx
+	testl	%ecx, %ecx
+	jz	2f
+	addl	%ebx, -__PAGE_OFFSET(%ebx, %ecx)
+	jmp	1b
+2:
+#endif
+
+/*
+ * Jump to the decompressed kernel.
+ */
+	xorl	%ebx, %ebx
+	jmp	*%ebp
+
+/*
+ * Stack and heap for uncompression
+ */
+	.bss
+	.balign 4
+boot_heap:
+	.fill BOOT_HEAP_SIZE, 1, 0
+boot_stack:
+	.fill BOOT_STACK_SIZE, 1, 0
+boot_stack_end:

kernel/arch/x86/boot/compressed/head_64.S

@@ -0,0 +1,371 @@
+/*
+ *  linux/boot/head.S
+ *
+ *  Copyright (C) 1991, 1992, 1993  Linus Torvalds
+ */
+
+/*
+ *  head.S contains the 32-bit startup code.
+ *
+ * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
+ * the page directory will exist. The startup code will be overwritten by
+ * the page directory. [According to comments etc elsewhere on a compressed
+ * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
+ *
+ * Page 0 is deliberately kept safe, since System Management Mode code in 
+ * laptops may need to access the BIOS data stored there.  This is also
+ * useful for future device drivers that either access the BIOS via VM86 
+ * mode.
+ */
+
+/*
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ */
+	.code32
+	.text
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/pgtable_types.h>
+#include <asm/page_types.h>
+#include <asm/boot.h>
+#include <asm/msr.h>
+#include <asm/processor-flags.h>
+#include <asm/asm-offsets.h>
+
+	__HEAD
+	.code32
+ENTRY(startup_32)
+	cld
+	/*
+	 * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+	 * us to not reload segments
+	 */
+	testb $(1<<6), BP_loadflags(%esi)
+	jnz 1f
+
+	cli
+	movl	$(__KERNEL_DS), %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %ss
+1:
+
+/*
+ * Calculate the delta between where we were compiled to run
+ * at and where we were actually loaded at.  This can only be done
+ * with a short local call on x86.  Nothing  else will tell us what
+ * address we are running at.  The reserved chunk of the real-mode
+ * data at 0x1e4 (defined as a scratch field) are used as the stack
+ * for this calculation. Only 4 bytes are needed.
+ */
+	leal	(BP_scratch+4)(%esi), %esp
+	call	1f
+1:	popl	%ebp
+	subl	$1b, %ebp
+
+/* setup a stack and make sure cpu supports long mode. */
+	movl	$boot_stack_end, %eax
+	addl	%ebp, %eax
+	movl	%eax, %esp
+
+	call	verify_cpu
+	testl	%eax, %eax
+	jnz	no_longmode
+
+/*
+ * Compute the delta between where we were compiled to run at
+ * and where the code will actually run at.
+ *
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
+ * contains the address where we should move the kernel image temporarily
+ * for safe in-place decompression.
+ */
+
+#ifdef CONFIG_RELOCATABLE
+	movl	%ebp, %ebx
+	movl	BP_kernel_alignment(%esi), %eax
+	decl	%eax
+	addl	%eax, %ebx
+	notl	%eax
+	andl	%eax, %ebx
+#else
+	movl	$LOAD_PHYSICAL_ADDR, %ebx
+#endif
+
+	/* Target address to relocate to for decompression */
+	addl	$z_extract_offset, %ebx
+
+/*
+ * Prepare for entering 64 bit mode
+ */
+
+	/* Load new GDT with the 64bit segments using 32bit descriptor */
+	leal	gdt(%ebp), %eax
+	movl	%eax, gdt+2(%ebp)
+	lgdt	gdt(%ebp)
+
+	/* Enable PAE mode */
+	movl	$(X86_CR4_PAE), %eax
+	movl	%eax, %cr4
+
+ /*
+  * Build early 4G boot pagetable
+  */
+	/* Initialize Page tables to 0 */
+	leal	pgtable(%ebx), %edi
+	xorl	%eax, %eax
+	movl	$((4096*6)/4), %ecx
+	rep	stosl
+
+	/* Build Level 4 */
+	leal	pgtable + 0(%ebx), %edi
+	leal	0x1007 (%edi), %eax
+	movl	%eax, 0(%edi)
+
+	/* Build Level 3 */
+	leal	pgtable + 0x1000(%ebx), %edi
+	leal	0x1007(%edi), %eax
+	movl	$4, %ecx
+1:	movl	%eax, 0x00(%edi)
+	addl	$0x00001000, %eax
+	addl	$8, %edi
+	decl	%ecx
+	jnz	1b
+
+	/* Build Level 2 */
+	leal	pgtable + 0x2000(%ebx), %edi
+	movl	$0x00000183, %eax
+	movl	$2048, %ecx
+1:	movl	%eax, 0(%edi)
+	addl	$0x00200000, %eax
+	addl	$8, %edi
+	decl	%ecx
+	jnz	1b
+
+	/* Enable the boot page tables */
+	leal	pgtable(%ebx), %eax
+	movl	%eax, %cr3
+
+	/* Enable Long mode in EFER (Extended Feature Enable Register) */
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	btsl	$_EFER_LME, %eax
+	wrmsr
+
+	/*
+	 * Setup for the jump to 64bit mode
+	 *
+	 * When the jump is performend we will be in long mode but
+	 * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
+	 * (and in turn EFER.LMA = 1).	To jump into 64bit mode we use
+	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+	 * We place all of the values on our mini stack so lret can
+	 * used to perform that far jump.
+	 */
+	pushl	$__KERNEL_CS
+	leal	startup_64(%ebp), %eax
+	pushl	%eax
+
+	/* Enter paged protected Mode, activating Long Mode */
+	movl	$(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */
+	movl	%eax, %cr0
+
+	/* Jump from 32bit compatibility mode into 64bit mode. */
+	lret
+ENDPROC(startup_32)
+
+no_longmode:
+	/* This isn't an x86-64 CPU so hang */
+1:
+	hlt
+	jmp     1b
+
+#include "../../kernel/verify_cpu.S"
+
+	/*
+	 * Be careful here startup_64 needs to be at a predictable
+	 * address so I can export it in an ELF header.  Bootloaders
+	 * should look at the ELF header to find this address, as
+	 * it may change in the future.
+	 */
+	.code64
+	.org 0x200
+ENTRY(startup_64)
+	/*
+	 * We come here either from startup_32 or directly from a
+	 * 64bit bootloader.  If we come here from a bootloader we depend on
+	 * an identity mapped page table being provied that maps our
+	 * entire text+data+bss and hopefully all of memory.
+	 */
+#ifdef CONFIG_EFI_STUB
+	/*
+	 * The entry point for the PE/COFF executable is 0x210, so only
+	 * legacy boot loaders will execute this jmp.
+	 */
+	jmp	preferred_addr
+
+	.org 0x210
+	mov	%rcx, %rdi
+	mov	%rdx, %rsi
+	call	efi_main
+	movq	%rax,%rsi
+	cmpq	$0,%rax
+	jne	2f
+1:
+	/* EFI init failed, so hang. */
+	hlt
+	jmp	1b
+2:
+	call	3f
+3:
+	popq	%rax
+	subq	$3b, %rax
+	subq	BP_pref_address(%rsi), %rax
+	add	BP_code32_start(%esi), %eax
+	leaq	preferred_addr(%rax), %rax
+	jmp	*%rax
+
+preferred_addr:
+#endif
+
+	/* Setup data segments. */
+	xorl	%eax, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %ss
+	movl	%eax, %fs
+	movl	%eax, %gs
+	lldt	%ax
+	movl    $0x20, %eax
+	ltr	%ax
+
+	/*
+	 * Compute the decompressed kernel start address.  It is where
+	 * we were loaded at aligned to a 2M boundary. %rbp contains the
+	 * decompressed kernel start address.
+	 *
+	 * If it is a relocatable kernel then decompress and run the kernel
+	 * from load address aligned to 2MB addr, otherwise decompress and
+	 * run the kernel from LOAD_PHYSICAL_ADDR
+	 *
+	 * We cannot rely on the calculation done in 32-bit mode, since we
+	 * may have been invoked via the 64-bit entry point.
+	 */
+
+	/* Start with the delta to where the kernel will run at. */
+#ifdef CONFIG_RELOCATABLE
+	leaq	startup_32(%rip) /* - $startup_32 */, %rbp
+	movl	BP_kernel_alignment(%rsi), %eax
+	decl	%eax
+	addq	%rax, %rbp
+	notq	%rax
+	andq	%rax, %rbp
+#else
+	movq	$LOAD_PHYSICAL_ADDR, %rbp
+#endif
+
+	/* Target address to relocate to for decompression */
+	leaq	z_extract_offset(%rbp), %rbx
+
+	/* Set up the stack */
+	leaq	boot_stack_end(%rbx), %rsp
+
+	/* Zero EFLAGS */
+	pushq	$0
+	popfq
+
+/*
+ * Copy the compressed kernel to the end of our buffer
+ * where decompression in place becomes safe.
+ */
+	pushq	%rsi
+	leaq	(_bss-8)(%rip), %rsi
+	leaq	(_bss-8)(%rbx), %rdi
+	movq	$_bss /* - $startup_32 */, %rcx
+	shrq	$3, %rcx
+	std
+	rep	movsq
+	cld
+	popq	%rsi
+
+/*
+ * Jump to the relocated address.
+ */
+	leaq	relocated(%rbx), %rax
+	jmp	*%rax
+
+	.text
+relocated:
+
+/*
+ * Clear BSS (stack is currently empty)
+ */
+	xorl	%eax, %eax
+	leaq    _bss(%rip), %rdi
+	leaq    _ebss(%rip), %rcx
+	subq	%rdi, %rcx
+	shrq	$3, %rcx
+	rep	stosq
+
+/*
+ * Adjust our own GOT
+ */
+	leaq	_got(%rip), %rdx
+	leaq	_egot(%rip), %rcx
+1:
+	cmpq	%rcx, %rdx
+	jae	2f
+	addq	%rbx, (%rdx)
+	addq	$8, %rdx
+	jmp	1b
+2:
+	
+/*
+ * Do the decompression, and jump to the new kernel..
+ */
+	pushq	%rsi			/* Save the real mode argument */
+	movq	%rsi, %rdi		/* real mode address */
+	leaq	boot_heap(%rip), %rsi	/* malloc area for uncompression */
+	leaq	input_data(%rip), %rdx  /* input_data */
+	movl	$z_input_len, %ecx	/* input_len */
+	movq	%rbp, %r8		/* output target address */
+	call	decompress_kernel
+	popq	%rsi
+
+/*
+ * Jump to the decompressed kernel.
+ */
+	jmp	*%rbp
+
+	.data
+gdt:
+	.word	gdt_end - gdt
+	.long	gdt
+	.word	0
+	.quad	0x0000000000000000	/* NULL descriptor */
+	.quad	0x00af9a000000ffff	/* __KERNEL_CS */
+	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
+	.quad	0x0080890000000000	/* TS descriptor */
+	.quad   0x0000000000000000	/* TS continued */
+gdt_end:
+
+/*
+ * Stack and heap for uncompression
+ */
+	.bss
+	.balign 4
+boot_heap:
+	.fill BOOT_HEAP_SIZE, 1, 0
+boot_stack:
+	.fill BOOT_STACK_SIZE, 1, 0
+boot_stack_end:
+
+/*
+ * Space for page tables (not in .bss so not zeroed)
+ */
+	.section ".pgtable","a",@nobits
+	.balign 4096
+pgtable:
+	.fill 6*4096, 1, 0

kernel/arch/x86/boot/compressed/misc.c

@@ -0,0 +1,379 @@
+/*
+ * misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ */
+
+#include "misc.h"
+
+/* WARNING!!
+ * This code is compiled with -fPIC and it is relocated dynamically
+ * at run time, but no relocation processing is performed.
+ * This means that it is not safe to place pointers in static structures.
+ */
+
+/*
+ * Getting to provable safe in place decompression is hard.
+ * Worst case behaviours need to be analyzed.
+ * Background information:
+ *
+ * The file layout is:
+ *    magic[2]
+ *    method[1]
+ *    flags[1]
+ *    timestamp[4]
+ *    extraflags[1]
+ *    os[1]
+ *    compressed data blocks[N]
+ *    crc[4] orig_len[4]
+ *
+ * resulting in 18 bytes of non compressed data overhead.
+ *
+ * Files divided into blocks
+ * 1 bit (last block flag)
+ * 2 bits (block type)
+ *
+ * 1 block occurs every 32K -1 bytes or when there 50% compression
+ * has been achieved. The smallest block type encoding is always used.
+ *
+ * stored:
+ *    32 bits length in bytes.
+ *
+ * fixed:
+ *    magic fixed tree.
+ *    symbols.
+ *
+ * dynamic:
+ *    dynamic tree encoding.
+ *    symbols.
+ *
+ *
+ * The buffer for decompression in place is the length of the
+ * uncompressed data, plus a small amount extra to keep the algorithm safe.
+ * The compressed data is placed at the end of the buffer.  The output
+ * pointer is placed at the start of the buffer and the input pointer
+ * is placed where the compressed data starts.  Problems will occur
+ * when the output pointer overruns the input pointer.
+ *
+ * The output pointer can only overrun the input pointer if the input
+ * pointer is moving faster than the output pointer.  A condition only
+ * triggered by data whose compressed form is larger than the uncompressed
+ * form.
+ *
+ * The worst case at the block level is a growth of the compressed data
+ * of 5 bytes per 32767 bytes.
+ *
+ * The worst case internal to a compressed block is very hard to figure.
+ * The worst case can at least be boundined by having one bit that represents
+ * 32764 bytes and then all of the rest of the bytes representing the very
+ * very last byte.
+ *
+ * All of which is enough to compute an amount of extra data that is required
+ * to be safe.  To avoid problems at the block level allocating 5 extra bytes
+ * per 32767 bytes of data is sufficient.  To avoind problems internal to a
+ * block adding an extra 32767 bytes (the worst case uncompressed block size)
+ * is sufficient, to ensure that in the worst case the decompressed data for
+ * block will stop the byte before the compressed data for a block begins.
+ * To avoid problems with the compressed data's meta information an extra 18
+ * bytes are needed.  Leading to the formula:
+ *
+ * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
+ *
+ * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
+ * Adding 32768 instead of 32767 just makes for round numbers.
+ * Adding the decompressor_size is necessary as it musht live after all
+ * of the data as well.  Last I measured the decompressor is about 14K.
+ * 10K of actual data and 4K of bss.
+ *
+ */
+
+/*
+ * gzip declarations
+ */
+#define STATIC		static
+
+#undef memset
+#undef memcpy
+#define memzero(s, n)	memset((s), 0, (n))
+
+
+static void error(char *m);
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+struct boot_params *real_mode;		/* Pointer to real-mode data */
+static int quiet;
+static int debug;
+
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *dest, const void *src, size_t n);
+
+#ifdef CONFIG_X86_64
+#define memptr long
+#else
+#define memptr unsigned
+#endif
+
+static memptr free_mem_ptr;
+static memptr free_mem_end_ptr;
+
+static char *vidmem;
+static int vidport;
+static int lines, cols;
+
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+#ifdef CONFIG_KERNEL_XZ
+#include "../../../../lib/decompress_unxz.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
+static void scroll(void)
+{
+	int i;
+
+	memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2);
+	for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2)
+		vidmem[i] = ' ';
+}
+
+#define XMTRDY          0x20
+
+#define TXR             0       /*  Transmit register (WRITE) */
+#define LSR             5       /*  Line Status               */
+static void serial_putchar(int ch)
+{
+	unsigned timeout = 0xffff;
+
+	while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
+		cpu_relax();
+
+	outb(ch, early_serial_base + TXR);
+}
+
+void __putstr(int error, const char *s)
+{
+	int x, y, pos;
+	char c;
+
+#ifndef CONFIG_X86_VERBOSE_BOOTUP
+	if (!error)
+		return;
+#endif
+	if (early_serial_base) {
+		const char *str = s;
+		while (*str) {
+			if (*str == '\n')
+				serial_putchar('\r');
+			serial_putchar(*str++);
+		}
+	}
+
+	if (real_mode->screen_info.orig_video_mode == 0 &&
+	    lines == 0 && cols == 0)
+		return;
+
+	x = real_mode->screen_info.orig_x;
+	y = real_mode->screen_info.orig_y;
+
+	while ((c = *s++) != '\0') {
+		if (c == '\n') {
+			x = 0;
+			if (++y >= lines) {
+				scroll();
+				y--;
+			}
+		} else {
+			vidmem[(x + cols * y) * 2] = c;
+			if (++x >= cols) {
+				x = 0;
+				if (++y >= lines) {
+					scroll();
+					y--;
+				}
+			}
+		}
+	}
+
+	real_mode->screen_info.orig_x = x;
+	real_mode->screen_info.orig_y = y;
+
+	pos = (x + cols * y) * 2;	/* Update cursor position */
+	outb(14, vidport);
+	outb(0xff & (pos >> 9), vidport+1);
+	outb(15, vidport);
+	outb(0xff & (pos >> 1), vidport+1);
+}
+
+void *memset(void *s, int c, size_t n)
+{
+	int i;
+	char *ss = s;
+
+	for (i = 0; i < n; i++)
+		ss[i] = c;
+	return s;
+}
+#ifdef CONFIG_X86_32
+void *memcpy(void *dest, const void *src, size_t n)
+{
+	int d0, d1, d2;
+	asm volatile(
+		"rep ; movsl\n\t"
+		"movl %4,%%ecx\n\t"
+		"rep ; movsb\n\t"
+		: "=&c" (d0), "=&D" (d1), "=&S" (d2)
+		: "0" (n >> 2), "g" (n & 3), "1" (dest), "2" (src)
+		: "memory");
+
+	return dest;
+}
+#else
+void *memcpy(void *dest, const void *src, size_t n)
+{
+	long d0, d1, d2;
+	asm volatile(
+		"rep ; movsq\n\t"
+		"movq %4,%%rcx\n\t"
+		"rep ; movsb\n\t"
+		: "=&c" (d0), "=&D" (d1), "=&S" (d2)
+		: "0" (n >> 3), "g" (n & 7), "1" (dest), "2" (src)
+		: "memory");
+
+	return dest;
+}
+#endif
+
+static void error(char *x)
+{
+	__putstr(1, "\n\n");
+	__putstr(1, x);
+	__putstr(1, "\n\n -- System halted");
+
+	while (1)
+		asm("hlt");
+}
+
+static void parse_elf(void *output)
+{
+#ifdef CONFIG_X86_64
+	Elf64_Ehdr ehdr;
+	Elf64_Phdr *phdrs, *phdr;
+#else
+	Elf32_Ehdr ehdr;
+	Elf32_Phdr *phdrs, *phdr;
+#endif
+	void *dest;
+	int i;
+
+	memcpy(&ehdr, output, sizeof(ehdr));
+	if (ehdr.e_ident[EI_MAG0] != ELFMAG0 ||
+	   ehdr.e_ident[EI_MAG1] != ELFMAG1 ||
+	   ehdr.e_ident[EI_MAG2] != ELFMAG2 ||
+	   ehdr.e_ident[EI_MAG3] != ELFMAG3) {
+		error("Kernel is not a valid ELF file");
+		return;
+	}
+
+	if (!quiet)
+		putstr("Parsing ELF... ");
+
+	phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
+	if (!phdrs)
+		error("Failed to allocate space for phdrs");
+
+	memcpy(phdrs, output + ehdr.e_phoff, sizeof(*phdrs) * ehdr.e_phnum);
+
+	for (i = 0; i < ehdr.e_phnum; i++) {
+		phdr = &phdrs[i];
+
+		switch (phdr->p_type) {
+		case PT_LOAD:
+#ifdef CONFIG_RELOCATABLE
+			dest = output;
+			dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR);
+#else
+			dest = (void *)(phdr->p_paddr);
+#endif
+			memcpy(dest,
+			       output + phdr->p_offset,
+			       phdr->p_filesz);
+			break;
+		default: /* Ignore other PT_* */ break;
+		}
+	}
+
+	free(phdrs);
+}
+
+asmlinkage void decompress_kernel(void *rmode, memptr heap,
+				  unsigned char *input_data,
+				  unsigned long input_len,
+				  unsigned char *output)
+{
+	real_mode = rmode;
+
+	if (cmdline_find_option_bool("quiet"))
+		quiet = 1;
+	if (cmdline_find_option_bool("debug"))
+		debug = 1;
+
+	if (real_mode->screen_info.orig_video_mode == 7) {
+		vidmem = (char *) 0xb0000;
+		vidport = 0x3b4;
+	} else {
+		vidmem = (char *) 0xb8000;
+		vidport = 0x3d4;
+	}
+
+	lines = real_mode->screen_info.orig_video_lines;
+	cols = real_mode->screen_info.orig_video_cols;
+
+	console_init();
+	if (debug)
+		putstr("early console in decompress_kernel\n");
+
+	free_mem_ptr     = heap;	/* Heap */
+	free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
+
+	if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
+		error("Destination address inappropriately aligned");
+#ifdef CONFIG_X86_64
+	if (heap > 0x3fffffffffffUL)
+		error("Destination address too large");
+#else
+	if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
+		error("Destination address too large");
+#endif
+#ifndef CONFIG_RELOCATABLE
+	if ((unsigned long)output != LOAD_PHYSICAL_ADDR)
+		error("Wrong destination address");
+#endif
+
+	if (!quiet)
+		putstr("\nDecompressing Linux... ");
+	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
+	parse_elf(output);
+	if (!quiet)
+		putstr("done.\nBooting the kernel.\n");
+	return;
+}

kernel/arch/x86/boot/compressed/misc.h

@@ -0,0 +1,39 @@
+#ifndef BOOT_COMPRESSED_MISC_H
+#define BOOT_COMPRESSED_MISC_H
+
+/*
+ * we have to be careful, because no indirections are allowed here, and
+ * paravirt_ops is a kind of one. As it will only run in baremetal anyway,
+ * we just keep it from happening
+ */
+#undef CONFIG_PARAVIRT
+#ifdef CONFIG_X86_32
+#define _ASM_X86_DESC_H 1
+#endif
+
+#include <linux/linkage.h>
+#include <linux/screen_info.h>
+#include <linux/elf.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <asm/boot.h>
+#include <asm/bootparam.h>
+
+#define BOOT_BOOT_H
+#include "../ctype.h"
+
+/* misc.c */
+extern struct boot_params *real_mode;		/* Pointer to real-mode data */
+void __putstr(int error, const char *s);
+#define putstr(__x)  __putstr(0, __x)
+#define puts(__x)  __putstr(0, __x)
+
+/* cmdline.c */
+int cmdline_find_option(const char *option, char *buffer, int bufsize);
+int cmdline_find_option_bool(const char *option);
+
+/* early_serial_console.c */
+extern int early_serial_base;
+void console_init(void);
+
+#endif

kernel/arch/x86/boot/compressed/mkpiggy.c

@@ -0,0 +1,95 @@
+/* ----------------------------------------------------------------------- *
+ *
+ *  Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License version
+ *  2 as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ *
+ *  H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Compute the desired load offset from a compressed program; outputs
+ * a small assembly wrapper with the appropriate symbols defined.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include <tools/le_byteshift.h>
+
+int main(int argc, char *argv[])
+{
+	uint32_t olen;
+	long ilen;
+	unsigned long offs;
+	FILE *f;
+
+	if (argc < 2) {
+		fprintf(stderr, "Usage: %s compressed_file\n", argv[0]);
+		return 1;
+	}
+
+	/* Get the information for the compressed kernel image first */
+
+	f = fopen(argv[1], "r");
+	if (!f) {
+		perror(argv[1]);
+		return 1;
+	}
+
+
+	if (fseek(f, -4L, SEEK_END)) {
+		perror(argv[1]);
+	}
+
+	if (fread(&olen, sizeof(olen), 1, f) != 1) {
+		perror(argv[1]);
+		return 1;
+	}
+
+	ilen = ftell(f);
+	olen = get_unaligned_le32(&olen);
+	fclose(f);
+
+	/*
+	 * Now we have the input (compressed) and output (uncompressed)
+	 * sizes, compute the necessary decompression offset...
+	 */
+
+	offs = (olen > ilen) ? olen - ilen : 0;
+	offs += olen >> 12;	/* Add 8 bytes for each 32K block */
+	offs += 64*1024 + 128;	/* Add 64K + 128 bytes slack */
+	offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
+
+	printf(".section \".rodata..compressed\",\"a\",@progbits\n");
+	printf(".globl z_input_len\n");
+	printf("z_input_len = %lu\n", ilen);
+	printf(".globl z_output_len\n");
+	printf("z_output_len = %lu\n", (unsigned long)olen);
+	printf(".globl z_extract_offset\n");
+	printf("z_extract_offset = 0x%lx\n", offs);
+	/* z_extract_offset_negative allows simplification of head_32.S */
+	printf(".globl z_extract_offset_negative\n");
+	printf("z_extract_offset_negative = -0x%lx\n", offs);
+
+	printf(".globl input_data, input_data_end\n");
+	printf("input_data:\n");
+	printf(".incbin \"%s\"\n", argv[1]);
+	printf("input_data_end:\n");
+
+	return 0;
+}

kernel/arch/x86/boot/compressed/string.c

@@ -0,0 +1,11 @@
+#include "misc.h"
+
+int memcmp(const void *s1, const void *s2, size_t len)
+{
+	u8 diff;
+	asm("repe; cmpsb; setnz %0"
+	    : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
+	return diff;
+}
+
+#include "../string.c"

kernel/arch/x86/boot/compressed/vmlinux.lds.S

@@ -0,0 +1,74 @@
+#include <asm-generic/vmlinux.lds.h>
+
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#undef i386
+
+#include <asm/cache.h>
+#include <asm/page_types.h>
+
+#ifdef CONFIG_X86_64
+OUTPUT_ARCH(i386:x86-64)
+ENTRY(startup_64)
+#else
+OUTPUT_ARCH(i386)
+ENTRY(startup_32)
+#endif
+
+SECTIONS
+{
+	/* Be careful parts of head_64.S assume startup_32 is at
+	 * address 0.
+	 */
+	. = 0;
+	.head.text : {
+		_head = . ;
+		HEAD_TEXT
+		_ehead = . ;
+	}
+	.rodata..compressed : {
+		*(.rodata..compressed)
+	}
+	.text :	{
+		_text = .; 	/* Text */
+		*(.text)
+		*(.text.*)
+		_etext = . ;
+	}
+	.rodata : {
+		_rodata = . ;
+		*(.rodata)	 /* read-only data */
+		*(.rodata.*)
+		_erodata = . ;
+	}
+	.got : {
+		_got = .;
+		KEEP(*(.got.plt))
+		KEEP(*(.got))
+		_egot = .;
+	}
+	.data :	{
+		_data = . ;
+		*(.data)
+		*(.data.*)
+		_edata = . ;
+	}
+	. = ALIGN(L1_CACHE_BYTES);
+	.bss : {
+		_bss = . ;
+		*(.bss)
+		*(.bss.*)
+		*(COMMON)
+		. = ALIGN(8);	/* For convenience during zeroing */
+		_ebss = .;
+	}
+#ifdef CONFIG_X86_64
+       . = ALIGN(PAGE_SIZE);
+       .pgtable : {
+		_pgtable = . ;
+		*(.pgtable)
+		_epgtable = . ;
+	}
+#endif
+	_end = .;
+}