M7350v1_en_gpl

kernel/arch/mn10300/proc-mn103e010/include/proc/cache.h

@@ -0,0 +1,43 @@
+/* MN103E010 Cache specification
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CACHE_H
+#define _ASM_PROC_CACHE_H
+
+/* L1 cache */
+
+#define L1_CACHE_NWAYS		4	/* number of ways in caches */
+#define L1_CACHE_NENTRIES	256	/* number of entries in each way */
+#define L1_CACHE_BYTES		16	/* bytes per entry */
+#define L1_CACHE_SHIFT		4	/* shift for bytes per entry */
+#define L1_CACHE_WAYDISP	0x1000	/* displacement of one way from the next */
+
+#define L1_CACHE_TAG_VALID	0x00000001	/* cache tag valid bit */
+#define L1_CACHE_TAG_DIRTY	0x00000008	/* data cache tag dirty bit */
+#define L1_CACHE_TAG_ENTRY	0x00000ff0	/* cache tag entry address mask */
+#define L1_CACHE_TAG_ADDRESS	0xfffff000	/* cache tag line address mask */
+#define L1_CACHE_TAG_MASK	+(L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY)
+
+/*
+ * specification of the interval between interrupt checking intervals whilst
+ * managing the cache with the interrupts disabled
+ */
+#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL	4
+
+/*
+ * The size of range at which it becomes more economical to just flush the
+ * whole cache rather than trying to flush the specified range.
+ */
+#define MN10300_DCACHE_FLUSH_BORDER	\
+	+(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES)
+#define MN10300_DCACHE_FLUSH_INV_BORDER	\
+	+(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES)
+
+#endif /* _ASM_PROC_CACHE_H */

kernel/arch/mn10300/proc-mn103e010/include/proc/clock.h

@@ -0,0 +1,16 @@
+/* MN103E010-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CLOCK_H
+#define _ASM_PROC_CLOCK_H
+
+#include <unit/clock.h>
+
+#endif /* _ASM_PROC_CLOCK_H */

kernel/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h

@@ -0,0 +1,102 @@
+/* MN103E010 on-board DMA controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_DMACTL_REGS_H
+#define _ASM_PROC_DMACTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* DMA registers */
+#define	DMxCTR(N)		__SYSREG(0xd2000000 + ((N) * 0x100), u32)	/* control reg */
+#define	DMxCTR_BG		0x0000001f	/* transfer request source */
+#define	DMxCTR_BG_SOFT		0x00000000	/* - software source */
+#define	DMxCTR_BG_SC0TX		0x00000002	/* - serial port 0 transmission */
+#define	DMxCTR_BG_SC0RX		0x00000003	/* - serial port 0 reception */
+#define	DMxCTR_BG_SC1TX		0x00000004	/* - serial port 1 transmission */
+#define	DMxCTR_BG_SC1RX		0x00000005	/* - serial port 1 reception */
+#define	DMxCTR_BG_SC2TX		0x00000006	/* - serial port 2 transmission */
+#define	DMxCTR_BG_SC2RX		0x00000007	/* - serial port 2 reception */
+#define	DMxCTR_BG_TM0UFLOW	0x00000008	/* - timer 0 underflow */
+#define	DMxCTR_BG_TM1UFLOW	0x00000009	/* - timer 1 underflow */
+#define	DMxCTR_BG_TM2UFLOW	0x0000000a	/* - timer 2 underflow */
+#define	DMxCTR_BG_TM3UFLOW	0x0000000b	/* - timer 3 underflow */
+#define	DMxCTR_BG_TM6ACMPCAP	0x0000000c	/* - timer 6A compare/capture */
+#define	DMxCTR_BG_AFE		0x0000000d	/* - analogue front-end interrupt source */
+#define	DMxCTR_BG_ADC		0x0000000e	/* - A/D conversion end interrupt source */
+#define	DMxCTR_BG_IRDA		0x0000000f	/* - IrDA interrupt source */
+#define	DMxCTR_BG_RTC		0x00000010	/* - RTC interrupt source */
+#define	DMxCTR_BG_XIRQ0		0x00000011	/* - XIRQ0 pin interrupt source */
+#define	DMxCTR_BG_XIRQ1		0x00000012	/* - XIRQ1 pin interrupt source */
+#define	DMxCTR_BG_XDMR0		0x00000013	/* - external request 0 source (XDMR0 pin) */
+#define	DMxCTR_BG_XDMR1		0x00000014	/* - external request 1 source (XDMR1 pin) */
+#define	DMxCTR_SAM		0x000000e0	/* DMA transfer src addr mode */
+#define	DMxCTR_SAM_INCR		0x00000000	/* - increment */
+#define	DMxCTR_SAM_DECR		0x00000020	/* - decrement */
+#define	DMxCTR_SAM_FIXED	0x00000040	/* - fixed */
+#define	DMxCTR_DAM		0x00000000	/* DMA transfer dest addr mode */
+#define	DMxCTR_DAM_INCR		0x00000000	/* - increment */
+#define	DMxCTR_DAM_DECR		0x00000100	/* - decrement */
+#define	DMxCTR_DAM_FIXED	0x00000200	/* - fixed */
+#define	DMxCTR_TM		0x00001800	/* DMA transfer mode */
+#define	DMxCTR_TM_BATCH		0x00000000	/* - batch transfer */
+#define	DMxCTR_TM_INTERM	0x00001000	/* - intermittent transfer */
+#define	DMxCTR_UT		0x00006000	/* DMA transfer unit */
+#define	DMxCTR_UT_1		0x00000000	/* - 1 byte */
+#define	DMxCTR_UT_2		0x00002000	/* - 2 byte */
+#define	DMxCTR_UT_4		0x00004000	/* - 4 byte */
+#define	DMxCTR_UT_16		0x00006000	/* - 16 byte */
+#define	DMxCTR_TEN		0x00010000	/* DMA channel transfer enable */
+#define	DMxCTR_RQM		0x00060000	/* external request input source mode */
+#define	DMxCTR_RQM_FALLEDGE	0x00000000	/* - falling edge */
+#define	DMxCTR_RQM_RISEEDGE	0x00020000	/* - rising edge */
+#define	DMxCTR_RQM_LOLEVEL	0x00040000	/* - low level */
+#define	DMxCTR_RQM_HILEVEL	0x00060000	/* - high level */
+#define	DMxCTR_RQF		0x01000000	/* DMA transfer request flag */
+#define	DMxCTR_XEND		0x80000000	/* DMA transfer end flag */
+
+#define	DMxSRC(N)		__SYSREG(0xd2000004 + ((N) * 0x100), u32)	/* control reg */
+
+#define	DMxDST(N)		__SYSREG(0xd2000008 + ((N) * 0x100), u32)	/* src addr reg */
+
+#define	DMxSIZ(N)		__SYSREG(0xd200000c + ((N) * 0x100), u32)	/* dest addr reg */
+#define DMxSIZ_CT		0x000fffff	/* number of bytes to transfer */
+
+#define	DMxCYC(N)		__SYSREG(0xd2000010 + ((N) * 0x100), u32)	/* intermittent
+										 * size reg */
+#define DMxCYC_CYC		0x000000ff	/* number of interrmittent transfers -1 */
+
+#define DM0IRQ			16		/* DMA channel 0 complete IRQ */
+#define DM1IRQ			17		/* DMA channel 1 complete IRQ */
+#define DM2IRQ			18		/* DMA channel 2 complete IRQ */
+#define DM3IRQ			19		/* DMA channel 3 complete IRQ */
+
+#define	DM0ICR			GxICR(DM0IRQ)	/* DMA channel 0 complete intr ctrl reg */
+#define	DM1ICR			GxICR(DM0IR1)	/* DMA channel 1 complete intr ctrl reg */
+#define	DM2ICR			GxICR(DM0IR2)	/* DMA channel 2 complete intr ctrl reg */
+#define	DM3ICR			GxICR(DM0IR3)	/* DMA channel 3 complete intr ctrl reg */
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_dmactl_regs {
+	u32		ctr;
+	const void	*src;
+	void		*dst;
+	u32		siz;
+	u32		cyc;
+} __attribute__((aligned(0x100)));
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PROC_DMACTL_REGS_H */

kernel/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h

@@ -0,0 +1,29 @@
+#ifndef _ASM_PROC_INTCTL_REGS_H
+#define _ASM_PROC_INTCTL_REGS_H
+
+#ifndef _ASM_INTCTL_REGS_H
+# error "please don't include this file directly"
+#endif
+
+/* intr acceptance group reg */
+#define IAGR			__SYSREG(0xd4000100, u16)
+
+/* group number register */
+#define IAGR_GN			0x00fc
+
+#define __GET_XIRQ_TRIGGER(X, Z) (((Z) >> ((X) * 2)) & 3)
+
+#define __SET_XIRQ_TRIGGER(X, Y, Z)		\
+({						\
+	typeof(Z) x = (Z);			\
+	x &= ~(3 << ((X) * 2));			\
+	x |= ((Y) & 3) << ((X) * 2);		\
+	(Z) = x;				\
+})
+
+/* external pin intr spec reg */
+#define EXTMD			__SYSREG(0xd4000200, u16)
+#define GET_XIRQ_TRIGGER(X)	__GET_XIRQ_TRIGGER(X, EXTMD)
+#define SET_XIRQ_TRIGGER(X, Y)	__SET_XIRQ_TRIGGER(X, Y, EXTMD)
+
+#endif /* _ASM_PROC_INTCTL_REGS_H */

kernel/arch/mn10300/proc-mn103e010/include/proc/irq.h

@@ -0,0 +1,34 @@
+/* MN103E010 On-board interrupt controller numbers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_IRQ_H
+#define _ASM_PROC_IRQ_H
+
+#ifdef __KERNEL__
+
+#define GxICR_NUM_IRQS		42
+
+#define GxICR_NUM_XIRQS		8
+
+#define XIRQ0		34
+#define XIRQ1		35
+#define XIRQ2		36
+#define XIRQ3		37
+#define XIRQ4		38
+#define XIRQ5		39
+#define XIRQ6		40
+#define XIRQ7		41
+
+#define XIRQ2IRQ(num)	(XIRQ0 + num)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PROC_IRQ_H */

kernel/arch/mn10300/proc-mn103e010/include/proc/proc.h

@@ -0,0 +1,18 @@
+/* MN103E010 Processor description
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_PROC_H
+#define _ASM_PROC_PROC_H
+
+#define PROCESSOR_VENDOR_NAME	"Panasonic"
+#define PROCESSOR_MODEL_NAME	"mn103e010"
+
+#endif /* _ASM_PROC_PROC_H */