M7350v1_en_gpl

This commit is contained in:
T
2024-09-09 08:52:07 +00:00
commit f9cc65cfda
65988 changed files with 26357421 additions and 0 deletions
@@ -0,0 +1,78 @@
* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
Required properties:
- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
Optional properties:
- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
Sub-nodes:
- regulators : Contain the regulator nodes. The MC13892 regulators are
bound using their names as listed below with their registers and bits
for enabling.
vcoincell : regulator VCOINCELL (register 13, bit 23)
sw1 : regulator SW1 (register 24, bit 0)
sw2 : regulator SW2 (register 25, bit 0)
sw3 : regulator SW3 (register 26, bit 0)
sw4 : regulator SW4 (register 27, bit 0)
swbst : regulator SWBST (register 29, bit 20)
vgen1 : regulator VGEN1 (register 32, bit 0)
viohi : regulator VIOHI (register 32, bit 3)
vdig : regulator VDIG (register 32, bit 9)
vgen2 : regulator VGEN2 (register 32, bit 12)
vpll : regulator VPLL (register 32, bit 15)
vusb2 : regulator VUSB2 (register 32, bit 18)
vgen3 : regulator VGEN3 (register 33, bit 0)
vcam : regulator VCAM (register 33, bit 6)
vvideo : regulator VVIDEO (register 33, bit 12)
vaudio : regulator VAUDIO (register 33, bit 15)
vsd : regulator VSD (register 33, bit 18)
gpo1 : regulator GPO1 (register 34, bit 6)
gpo2 : regulator GPO2 (register 34, bit 8)
gpo3 : regulator GPO3 (register 34, bit 10)
gpo4 : regulator GPO4 (register 34, bit 12)
pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
vusb : regulator VUSB (register 50, bit 3)
The bindings details of individual regulator device can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt
Examples:
ecspi@70010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
<&gpio3 25 0>; /* GPIO4_25 */
status = "okay";
pmic: mc13892@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
reg = <0>;
interrupt-parent = <&gpio0>;
interrupts = <8>;
regulators {
sw1_reg: mc13892__sw1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1375000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: mc13892__sw2 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
@@ -0,0 +1,47 @@
Texas Instruments TWL family
The TWLs are Integrated Power Management Chips.
Some version might contain much more analog function like
USB transceiver or Audio amplifier.
These chips are connected to an i2c bus.
Required properties:
- compatible : Must be "ti,twl4030";
For Integrated power-management/audio CODEC device used in OMAP3
based boards
- compatible : Must be "ti,twl6030";
For Integrated power-management used in OMAP4 based boards
- interrupts : This i2c device has an IRQ line connected to the main SoC
- interrupt-controller : Since the twl support several interrupts internally,
it is considered as an interrupt controller cascaded to the SoC one.
- #interrupt-cells = <1>;
- interrupt-parent : The parent interrupt controller.
Optional node:
- Child nodes contain in the twl. The twl family is made of several variants
that support a different number of features.
The children nodes will thus depend of the capability of the variant.
Example:
/*
* Integrated Power Management Chip
* http://www.ti.com/lit/ds/symlink/twl6030.pdf
*/
twl@48 {
compatible = "ti,twl6030";
reg = <0x48>;
interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <0>;
twl_rtc {
compatible = "ti,twl_rtc";
interrupts = <11>;
reg = <0>;
};
};