tobi/M7350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

M7350v1_en_gpl

Browse Source
This commit is contained in:
T
2024-09-09 08:52:07 +00:00
commit f9cc65cfda
65988 changed files with 26357421 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
kernel/Documentation/blockdev/00-INDEX Normal file
View File

@@ -0,0 +1,18 @@
00-INDEX
- this file
README.DAC960
- info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux.
cciss.txt
- info, major/minor #'s for Compaq's SMART Array Controllers.
cpqarray.txt
- info on using Compaq's SMART2 Intelligent Disk Array Controllers.
floppy.txt
- notes and driver options for the floppy disk driver.
mflash.txt
- info on mGine m(g)flash driver for linux.
nbd.txt
- info on a TCP implementation of a network block device.
paride.txt
- information about the parallel port IDE subsystem.
ramdisk.txt
- short guide on how to set up and use the RAM disk.

756
kernel/Documentation/blockdev/README.DAC960 Normal file
View File

@@ -0,0 +1,756 @@
Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
Version 2.2.11 for Linux 2.2.19
Version 2.4.11 for Linux 2.4.12
PRODUCTION RELEASE
11 October 2001
Leonard N. Zubkoff
Dandelion Digital
lnz@dandelion.com
Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
INTRODUCTION
Mylex, Inc. designs and manufactures a variety of high performance PCI RAID
controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont,
California 94555, USA and can be reached at 510.796.6100 or on the World Wide
Web at http://www.mylex.com. Mylex Technical Support can be reached by
electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at
510.745.7715. Contact information for offices in Europe and Japan is available
on their Web site.
The latest information on Linux support for DAC960 PCI RAID Controllers, as
well as the most recent release of this driver, will always be available from
my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960
driver supports all current Mylex PCI RAID controllers including the new
eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely
new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250,
and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as
minimum firmware version requirements. For simplicity, in most places this
documentation refers to DAC960 generically rather than explicitly listing all
the supported models.
Driver bug reports should be sent via electronic mail to "lnz@dandelion.com".
Please include with the bug report the complete configuration messages reported
by the driver at startup, along with any subsequent system messages relevant to
the controller's operation, and a detailed description of your system's
hardware configuration. Driver bugs are actually quite rare; if you encounter
problems with disks being marked offline, for example, please contact Mylex
Technical Support as the problem is related to the hardware configuration
rather than the Linux driver.
Please consult the RAID controller documentation for detailed information
regarding installation and configuration of the controllers. This document
primarily provides information specific to the Linux support.
DRIVER FEATURES
The DAC960 RAID controllers are supported solely as high performance RAID
controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960
driver operates at the block device level, the same level as the SCSI and IDE
drivers. Unlike other RAID controllers currently supported on Linux, the
DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the
complexity and unnecessary code that would be associated with an implementation
as a SCSI driver. The DAC960 driver is designed for as high a performance as
possible with no compromises or extra code for compatibility with lower
performance devices. The DAC960 driver includes extensive error logging and
online configuration management capabilities. Except for initial configuration
of the controller and adding new disk drives, most everything can be handled
from Linux while the system is operational.
The DAC960 driver is architected to support up to 8 controllers per system.
Each DAC960 parallel SCSI controller can support up to 15 disk drives per
channel, for a maximum of 60 drives on a four channel controller; the fibre
channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for
a total of 250 drives. The drives installed on a controller are divided into
one or more "Drive Groups", and then each Drive Group is subdivided further
into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level
and caching policy associated with it, and it appears to Linux as a single
block device. Logical Drives are further subdivided into up to 7 partitions
through the normal Linux and PC disk partitioning schemes. Logical Drives are
also known as "System Drives", and Drive Groups are also called "Packs". Both
terms are in use in the Mylex documentation; I have chosen to standardize on
the more generic "Logical Drive" and "Drive Group".
DAC960 RAID disk devices are named in the style of the obsolete Device File
System (DEVFS). The device corresponding to Logical Drive D on Controller C
is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on
Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI
disks the device names will not change in the event of a disk drive failure.
The DAC960 driver is assigned major numbers 48 - 55 with one major number per
controller. The 8 bits of minor number are divided into 5 bits for the Logical
Drive and 3 bits for the partition.
SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS
The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID
PCI RAID Controllers as of the date of this document. It is recommended that
anyone purchasing a Mylex PCI RAID Controller not in the following table
contact the author beforehand to verify that it is or will be supported.
eXtremeRAID 3000
1 Wide Ultra-2/LVD SCSI channel
2 External Fibre FC-AL channels
233MHz StrongARM SA 110 Processor
64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
32MB/64MB ECC SDRAM Memory
eXtremeRAID 2000
4 Wide Ultra-160 LVD SCSI channels
233MHz StrongARM SA 110 Processor
64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
32MB/64MB ECC SDRAM Memory
AcceleRAID 352
2 Wide Ultra-160 LVD SCSI channels
100MHz Intel i960RN RISC Processor
64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
32MB/64MB ECC SDRAM Memory
AcceleRAID 170
1 Wide Ultra-160 LVD SCSI channel
100MHz Intel i960RM RISC Processor
16MB/32MB/64MB ECC SDRAM Memory
AcceleRAID 160 (AcceleRAID 170LP)
1 Wide Ultra-160 LVD SCSI channel
100MHz Intel i960RS RISC Processor
Built in 16M ECC SDRAM Memory
PCI Low Profile Form Factor - fit for 2U height
eXtremeRAID 1100 (DAC1164P)
3 Wide Ultra-2/LVD SCSI channels
233MHz StrongARM SA 110 Processor
64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
16MB/32MB/64MB Parity SDRAM Memory with Battery Backup
AcceleRAID 250 (DAC960PTL1)
Uses onboard Symbios SCSI chips on certain motherboards
Also includes one onboard Wide Ultra-2/LVD SCSI Channel
66MHz Intel i960RD RISC Processor
4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
AcceleRAID 200 (DAC960PTL0)
Uses onboard Symbios SCSI chips on certain motherboards
Includes no onboard SCSI Channels
66MHz Intel i960RD RISC Processor
4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
AcceleRAID 150 (DAC960PRL)
Uses onboard Symbios SCSI chips on certain motherboards
Also includes one onboard Wide Ultra-2/LVD SCSI Channel
33MHz Intel i960RP RISC Processor
4MB Parity EDO Memory
DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels
66MHz Intel i960RD RISC Processor
4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels
33MHz Intel i960RP RISC Processor
4MB/8MB ECC EDO Memory
DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels
Intel i960CF RISC Processor
4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
DAC960PD 1/2/3 Wide Fast SCSI-2 Channels
Intel i960CF RISC Processor
4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
DAC960PL 1/2/3 Wide Fast SCSI-2 Channels
Intel i960 RISC Processor
2MB/4MB/8MB/16MB/32MB DRAM Memory
DAC960P 1/2/3 Wide Fast SCSI-2 Channels
Intel i960 RISC Processor
2MB/4MB/8MB/16MB/32MB DRAM Memory
For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version
6.00-01 or above is required.
For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required.
For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is
required.
For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required.
For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version
3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware
version 2.73-0-00 or above is required (for single Flash ROM controllers)
Please note that not all SCSI disk drives are suitable for use with DAC960
controllers, and only particular firmware versions of any given model may
actually function correctly. Similarly, not all motherboards have a BIOS that
properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150,
DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device.
If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to
verify compatibility. Mylex makes available a hard disk compatibility list at
http://www.mylex.com/support/hdcomp/hd-lists.html.
DRIVER INSTALLATION
This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12.
To install the DAC960 RAID driver, you may use the following commands,
replacing "/usr/src" with wherever you keep your Linux kernel source tree:
cd /usr/src
tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz)
mv README.DAC960 linux/Documentation
mv DAC960.[ch] linux/drivers/block
patch -p0 < DAC960.patch (if DAC960.patch is included)
cd linux
make config
make bzImage (or zImage)
Then install "arch/x86/boot/bzImage" or "arch/x86/boot/zImage" as your
standard kernel, run lilo if appropriate, and reboot.
To create the necessary devices in /dev, the "make_rd" script included in
"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used.
LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive
are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with
statically linked executables of LILO and FDISK. This modified version of LILO
will allow booting from a DAC960 controller and/or mounting the root file
system from a DAC960.
Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID
controllers. Installing directly onto a DAC960 may be problematic from other
Linux distributions until their installation utilities are updated.
INSTALLATION NOTES
Before installing Linux or adding DAC960 logical drives to an existing Linux
system, the controller must first be configured to provide one or more logical
drives using the BIOS Configuration Utility or DACCF. Please note that since
there are only at most 6 usable partitions on each logical drive, systems
requiring more partitions should subdivide a drive group into multiple logical
drives, each of which can have up to 6 usable partitions. Also, note that with
large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63)
rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do
will cause the logical drive geometry to have more than 65535 cylinders which
will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry
can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M
during the BIOS initialization sequence.
For maximum performance and the most efficient E2FSCK performance, it is
recommended that EXT2 file systems be built with a 4KB block size and 16 block
stride to match the DAC960 controller's 64KB default stripe size. The command
"mke2fs -b 4096 -R stride=16 <device>" is appropriate. Unless there will be a
large number of small files on the file systems, it is also beneficial to add
the "-i 16384" option to increase the bytes per inode parameter thereby
reducing the file system metadata. Finally, on systems that will only be run
with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks
with the "-s 1" option.
DAC960 ANNOUNCEMENTS MAILING LIST
The DAC960 Announcements Mailing List provides a forum for informing Linux
users of new driver releases and other announcements regarding Linux support
for DAC960 PCI RAID Controllers. To join the mailing list, send a message to
"dac960-announce-request@dandelion.com" with the line "subscribe" in the
message body.
CONTROLLER CONFIGURATION AND STATUS MONITORING
The DAC960 RAID controllers running firmware 4.06 or above include a Background
Initialization facility so that system downtime is minimized both for initial
installation and subsequent configuration of additional storage. The BIOS
Configuration Utility (accessible via Alt-R during the BIOS initialization
sequence) is used to quickly configure the controller, and then the logical
drives that have been created are available for immediate use even while they
are still being initialized by the controller. The primary need for online
configuration and status monitoring is then to avoid system downtime when disk
drives fail and must be replaced. Mylex's online monitoring and configuration
utilities are being ported to Linux and will become available at some point in
the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure)
enclosure, the controller is able to rebuild failed drives automatically as
soon as a drive replacement is made available.
The primary interfaces for controller configuration and status monitoring are
special files created in the /proc/rd/... hierarchy along with the normal
system console logging mechanism. Whenever the system is operating, the DAC960
driver queries each controller for status information every 10 seconds, and
checks for additional conditions every 60 seconds. The initial status of each
controller is always available for controller N in /proc/rd/cN/initial_status,
and the current status as of the last status monitoring query is available in
/proc/rd/cN/current_status. In addition, status changes are also logged by the
driver to the system console and will appear in the log files maintained by
syslog. The progress of asynchronous rebuild or consistency check operations
is also available in /proc/rd/cN/current_status, and progress messages are
logged to the system console at most every 60 seconds.
Starting with the 2.2.3/2.0.3 versions of the driver, the status information
available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been
augmented to include the vendor, model, revision, and serial number (if
available) for each physical device found connected to the controller:
***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 *****
Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
Configuring Mylex DAC960PRL PCI RAID Controller
Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB
PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned
PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21
Controller Queue Depth: 128, Maximum Blocks per Command: 128
Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
SAF-TE Enclosure Management Enabled
Physical Devices:
0:0 Vendor: IBM Model: DRVS09D Revision: 0270
Serial Number: 68016775HA
Disk Status: Online, 17928192 blocks
0:1 Vendor: IBM Model: DRVS09D Revision: 0270
Serial Number: 68004E53HA
Disk Status: Online, 17928192 blocks
0:2 Vendor: IBM Model: DRVS09D Revision: 0270
Serial Number: 13013935HA
Disk Status: Online, 17928192 blocks
0:3 Vendor: IBM Model: DRVS09D Revision: 0270
Serial Number: 13016897HA
Disk Status: Online, 17928192 blocks
0:4 Vendor: IBM Model: DRVS09D Revision: 0270
Serial Number: 68019905HA
Disk Status: Online, 17928192 blocks
0:5 Vendor: IBM Model: DRVS09D Revision: 0270
Serial Number: 68012753HA
Disk Status: Online, 17928192 blocks
0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61
Logical Drives:
/dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru
No Rebuild or Consistency Check in Progress
To simplify the monitoring process for custom software, the special file
/proc/rd/status returns "OK" when all DAC960 controllers in the system are
operating normally and no failures have occurred, or "ALERT" if any logical
drives are offline or critical or any non-standby physical drives are dead.
Configuration commands for controller N are available via the special file
/proc/rd/cN/user_command. A human readable command can be written to this
special file to initiate a configuration operation, and the results of the
operation can then be read back from the special file in addition to being
logged to the system console. The shell command sequence
echo "<configuration-command>" > /proc/rd/c0/user_command
cat /proc/rd/c0/user_command
is typically used to execute configuration commands. The configuration
commands are:
flush-cache
The "flush-cache" command flushes the controller's cache. The system
automatically flushes the cache at shutdown or if the driver module is
unloaded, so this command is only needed to be certain a write back cache
is flushed to disk before the system is powered off by a command to a UPS.
Note that the flush-cache command also stops an asynchronous rebuild or
consistency check, so it should not be used except when the system is being
halted.
kill <channel>:<target-id>
The "kill" command marks the physical drive <channel>:<target-id> as DEAD.
This command is provided primarily for testing, and should not be used
during normal system operation.
make-online <channel>:<target-id>
The "make-online" command changes the physical drive <channel>:<target-id>
from status DEAD to status ONLINE. In cases where multiple physical drives
have been killed simultaneously, this command may be used to bring all but
one of them back online, after which a rebuild to the final drive is
necessary.
Warning: make-online should only be used on a dead physical drive that is
an active part of a drive group, never on a standby drive. The command
should never be used on a dead drive that is part of a critical logical
drive; rebuild should be used if only a single drive is dead.
make-standby <channel>:<target-id>
The "make-standby" command changes physical drive <channel>:<target-id>
from status DEAD to status STANDBY. It should only be used in cases where
a dead drive was replaced after an automatic rebuild was performed onto a
standby drive. It cannot be used to add a standby drive to the controller
configuration if one was not created initially; the BIOS Configuration
Utility must be used for that currently.
rebuild <channel>:<target-id>
The "rebuild" command initiates an asynchronous rebuild onto physical drive
<channel>:<target-id>. It should only be used when a dead drive has been
replaced.
check-consistency <logical-drive-number>
The "check-consistency" command initiates an asynchronous consistency check
of <logical-drive-number> with automatic restoration. It can be used
whenever it is desired to verify the consistency of the redundancy
information.
cancel-rebuild
cancel-consistency-check
The "cancel-rebuild" and "cancel-consistency-check" commands cancel any
rebuild or consistency check operations previously initiated.
EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE
The following annotated logs demonstrate the controller configuration and and
online status monitoring capabilities of the Linux DAC960 Driver. The test
configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
DAC960PJ controller. The physical drives are configured into a single drive
group without a standby drive, and the drive group has been configured into two
logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
earlier version of the driver and the messages have changed somewhat with newer
releases, but the functionality remains similar. First, here is the current
status of the RAID configuration:
gwynedd:/u/lnz# cat /proc/rd/c0/current_status
***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
Configuring Mylex DAC960PJ PCI RAID Controller
Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
Controller Queue Depth: 128, Maximum Blocks per Command: 128
Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
Physical Devices:
0:1 - Disk: Online, 2201600 blocks
0:2 - Disk: Online, 2201600 blocks
0:3 - Disk: Online, 2201600 blocks
1:1 - Disk: Online, 2201600 blocks
1:2 - Disk: Online, 2201600 blocks
1:3 - Disk: Online, 2201600 blocks
Logical Drives:
/dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
/dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
No Rebuild or Consistency Check in Progress
gwynedd:/u/lnz# cat /proc/rd/status
OK
The above messages indicate that everything is healthy, and /proc/rd/status
returns "OK" indicating that there are no problems with any DAC960 controller
in the system. For demonstration purposes, while I/O is active Physical Drive
1:1 is now disconnected, simulating a drive failure. The failure is noted by
the driver within 10 seconds of the controller's having detected it, and the
driver logs the following console status messages indicating that Logical
Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD:
DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command
DAC960#0: Physical Drive 1:1 is now DEAD
DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
The Sense Keys logged here are just Check Condition / Unit Attention conditions
arising from a SCSI bus reset that is forced by the controller during its error
recovery procedures. Concurrently with the above, the driver status available
from /proc/rd also reflects the drive failure. The status message in
/proc/rd/status has changed from "OK" to "ALERT":
gwynedd:/u/lnz# cat /proc/rd/status
ALERT
and /proc/rd/c0/current_status has been updated:
gwynedd:/u/lnz# cat /proc/rd/c0/current_status
...
Physical Devices:
0:1 - Disk: Online, 2201600 blocks
0:2 - Disk: Online, 2201600 blocks
0:3 - Disk: Online, 2201600 blocks
1:1 - Disk: Dead, 2201600 blocks
1:2 - Disk: Online, 2201600 blocks
1:3 - Disk: Online, 2201600 blocks
Logical Drives:
/dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
/dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
No Rebuild or Consistency Check in Progress
Since there are no standby drives configured, the system can continue to access
the logical drives in a performance degraded mode until the failed drive is
replaced and a rebuild operation completed to restore the redundancy of the
logical drives. Once Physical Drive 1:1 is replaced with a properly
functioning drive, or if the physical drive was killed without having failed
(e.g., due to electrical problems on the SCSI bus), the user can instruct the
controller to initiate a rebuild operation onto the newly replaced drive:
gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command
gwynedd:/u/lnz# cat /proc/rd/c0/user_command
Rebuild of Physical Drive 1:1 Initiated
The echo command instructs the controller to initiate an asynchronous rebuild
operation onto Physical Drive 1:1, and the status message that results from the
operation is then available for reading from /proc/rd/c0/user_command, as well
as being logged to the console by the driver.
Within 10 seconds of this command the driver logs the initiation of the
asynchronous rebuild operation:
DAC960#0: Rebuild of Physical Drive 1:1 Initiated
DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
DAC960#0: Physical Drive 1:1 is now WRITE-ONLY
DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed
and /proc/rd/c0/current_status is updated:
gwynedd:/u/lnz# cat /proc/rd/c0/current_status
...
Physical Devices:
0:1 - Disk: Online, 2201600 blocks
0:2 - Disk: Online, 2201600 blocks
0:3 - Disk: Online, 2201600 blocks
1:1 - Disk: Write-Only, 2201600 blocks
1:2 - Disk: Online, 2201600 blocks
1:3 - Disk: Online, 2201600 blocks
Logical Drives:
/dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
/dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed
As the rebuild progresses, the current status in /proc/rd/c0/current_status is
updated every 10 seconds:
gwynedd:/u/lnz# cat /proc/rd/c0/current_status
...
Physical Devices:
0:1 - Disk: Online, 2201600 blocks
0:2 - Disk: Online, 2201600 blocks
0:3 - Disk: Online, 2201600 blocks
1:1 - Disk: Write-Only, 2201600 blocks
1:2 - Disk: Online, 2201600 blocks
1:3 - Disk: Online, 2201600 blocks
Logical Drives:
/dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
/dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed
and every minute a progress message is logged to the console by the driver:
DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed
DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed
DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed
DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed
Finally, the rebuild completes successfully. The driver logs the status of the
logical and physical drives and the rebuild completion:
DAC960#0: Rebuild Completed Successfully
DAC960#0: Physical Drive 1:1 is now ONLINE
DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
/proc/rd/c0/current_status is updated:
gwynedd:/u/lnz# cat /proc/rd/c0/current_status
...
Physical Devices:
0:1 - Disk: Online, 2201600 blocks
0:2 - Disk: Online, 2201600 blocks
0:3 - Disk: Online, 2201600 blocks
1:1 - Disk: Online, 2201600 blocks
1:2 - Disk: Online, 2201600 blocks
1:3 - Disk: Online, 2201600 blocks
Logical Drives:
/dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
/dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
Rebuild Completed Successfully
and /proc/rd/status indicates that everything is healthy once again:
gwynedd:/u/lnz# cat /proc/rd/status
OK
EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE
The following annotated logs demonstrate the controller configuration and and
online status monitoring capabilities of the Linux DAC960 Driver. The test
configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
DAC960PJ controller. The physical drives are configured into a single drive
group with a standby drive, and the drive group has been configured into two
logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
earlier version of the driver and the messages have changed somewhat with newer
releases, but the functionality remains similar. First, here is the current
status of the RAID configuration:
gwynedd:/u/lnz# cat /proc/rd/c0/current_status
***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
Configuring Mylex DAC960PJ PCI RAID Controller
Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
Controller Queue Depth: 128, Maximum Blocks per Command: 128
Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
Physical Devices:
0:1 - Disk: Online, 2201600 blocks
0:2 - Disk: Online, 2201600 blocks
0:3 - Disk: Online, 2201600 blocks
1:1 - Disk: Online, 2201600 blocks
1:2 - Disk: Online, 2201600 blocks
1:3 - Disk: Standby, 2201600 blocks
Logical Drives:
/dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
/dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
No Rebuild or Consistency Check in Progress
gwynedd:/u/lnz# cat /proc/rd/status
OK
The above messages indicate that everything is healthy, and /proc/rd/status
returns "OK" indicating that there are no problems with any DAC960 controller
in the system. For demonstration purposes, while I/O is active Physical Drive
1:2 is now disconnected, simulating a drive failure. The failure is noted by
the driver within 10 seconds of the controller's having detected it, and the
driver logs the following console status messages:
DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command
DAC960#0: Physical Drive 1:2 is now DEAD
DAC960#0: Physical Drive 1:2 killed because it was removed
DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
Since a standby drive is configured, the controller automatically begins
rebuilding onto the standby drive:
DAC960#0: Physical Drive 1:3 is now WRITE-ONLY
DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
Concurrently with the above, the driver status available from /proc/rd also
reflects the drive failure and automatic rebuild. The status message in
/proc/rd/status has changed from "OK" to "ALERT":
gwynedd:/u/lnz# cat /proc/rd/status
ALERT
and /proc/rd/c0/current_status has been updated:
gwynedd:/u/lnz# cat /proc/rd/c0/current_status
...
Physical Devices:
0:1 - Disk: Online, 2201600 blocks
0:2 - Disk: Online, 2201600 blocks
0:3 - Disk: Online, 2201600 blocks
1:1 - Disk: Online, 2201600 blocks
1:2 - Disk: Dead, 2201600 blocks
1:3 - Disk: Write-Only, 2201600 blocks
Logical Drives:
/dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
/dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
As the rebuild progresses, the current status in /proc/rd/c0/current_status is
updated every 10 seconds:
gwynedd:/u/lnz# cat /proc/rd/c0/current_status
...
Physical Devices:
0:1 - Disk: Online, 2201600 blocks
0:2 - Disk: Online, 2201600 blocks
0:3 - Disk: Online, 2201600 blocks
1:1 - Disk: Online, 2201600 blocks
1:2 - Disk: Dead, 2201600 blocks
1:3 - Disk: Write-Only, 2201600 blocks
Logical Drives:
/dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
/dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
and every minute a progress message is logged on the console by the driver:
DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed
DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed
DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed
Finally, the rebuild completes successfully. The driver logs the status of the
logical and physical drives and the rebuild completion:
DAC960#0: Rebuild Completed Successfully
DAC960#0: Physical Drive 1:3 is now ONLINE
DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
/proc/rd/c0/current_status is updated:
***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
Configuring Mylex DAC960PJ PCI RAID Controller
Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
Controller Queue Depth: 128, Maximum Blocks per Command: 128
Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
Physical Devices:
0:1 - Disk: Online, 2201600 blocks
0:2 - Disk: Online, 2201600 blocks
0:3 - Disk: Online, 2201600 blocks
1:1 - Disk: Online, 2201600 blocks
1:2 - Disk: Dead, 2201600 blocks
1:3 - Disk: Online, 2201600 blocks
Logical Drives:
/dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
/dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
Rebuild Completed Successfully
and /proc/rd/status indicates that everything is healthy once again:
gwynedd:/u/lnz# cat /proc/rd/status
OK
Note that the absence of a viable standby drive does not create an "ALERT"
status. Once dead Physical Drive 1:2 has been replaced, the controller must be
told that this has occurred and that the newly replaced drive should become the
new standby drive:
gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command
gwynedd:/u/lnz# cat /proc/rd/c0/user_command
Make Standby of Physical Drive 1:2 Succeeded
The echo command instructs the controller to make Physical Drive 1:2 into a
standby drive, and the status message that results from the operation is then
available for reading from /proc/rd/c0/user_command, as well as being logged to
the console by the driver. Within 60 seconds of this command the driver logs:
DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
DAC960#0: Physical Drive 1:2 is now STANDBY
DAC960#0: Make Standby of Physical Drive 1:2 Succeeded
and /proc/rd/c0/current_status is updated:
gwynedd:/u/lnz# cat /proc/rd/c0/current_status
...
Physical Devices:
0:1 - Disk: Online, 2201600 blocks
0:2 - Disk: Online, 2201600 blocks
0:3 - Disk: Online, 2201600 blocks
1:1 - Disk: Online, 2201600 blocks
1:2 - Disk: Standby, 2201600 blocks
1:3 - Disk: Online, 2201600 blocks
Logical Drives:
/dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
/dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
Rebuild Completed Successfully

194
kernel/Documentation/blockdev/cciss.txt Normal file
View File

@@ -0,0 +1,194 @@
This driver is for Compaq's SMART Array Controllers.
Supported Cards:
----------------
This driver is known to work with the following cards:
* SA 5300
* SA 5i
* SA 532
* SA 5312
* SA 641
* SA 642
* SA 6400
* SA 6400 U320 Expansion Module
* SA 6i
* SA P600
* SA P800
* SA E400
* SA P400i
* SA E200
* SA E200i
* SA E500
* SA P700m
* SA P212
* SA P410
* SA P410i
* SA P411
* SA P812
* SA P712m
* SA P711m
Detecting drive failures:
-------------------------
To get the status of logical volumes and to detect physical drive
failures, you can use the cciss_vol_status program found here:
http://cciss.sourceforge.net/#cciss_utils
Device Naming:
--------------
If nodes are not already created in the /dev/cciss directory, run as root:
# cd /dev
# ./MAKEDEV cciss
You need some entries in /dev for the cciss device. The MAKEDEV script
can make device nodes for you automatically. Currently the device setup
is as follows:
Major numbers:
104 cciss0
105 cciss1
106 cciss2
105 cciss3
108 cciss4
109 cciss5
110 cciss6
111 cciss7
Minor numbers:
b7 b6 b5 b4 b3 b2 b1 b0
|----+----| |----+----|
| |
| +-------- Partition ID (0=wholedev, 1-15 partition)
|
+-------------------- Logical Volume number
The device naming scheme is:
/dev/cciss/c0d0 Controller 0, disk 0, whole device
/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1
/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2
/dev/cciss/c0d0p3 Controller 0, disk 0, partition 3
/dev/cciss/c1d1 Controller 1, disk 1, whole device
/dev/cciss/c1d1p1 Controller 1, disk 1, partition 1
/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2
/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3
CCISS simple mode support
-------------------------
The "cciss_simple_mode=1" boot parameter may be used to prevent the driver
from putting the controller into "performant" mode. The difference is that
with simple mode, each command completion requires an interrupt, while with
"performant mode" (the default, and ordinarily better performing) it is
possible to have multiple command completions indicated by a single
interrupt.
SCSI tape drive and medium changer support
------------------------------------------
SCSI sequential access devices and medium changer devices are supported and
appropriate device nodes are automatically created. (e.g.
/dev/st0, /dev/st1, etc. See the "st" man page for more details.)
You must enable "SCSI tape drive support for Smart Array 5xxx" and
"SCSI support" in your kernel configuration to be able to use SCSI
tape drives with your Smart Array 5xxx controller.
Additionally, note that the driver will engage the SCSI core at init
time if any tape drives or medium changers are detected. The driver may
also be directed to dynamically engage the SCSI core via the /proc filesystem
entry which the "block" side of the driver creates as
/proc/driver/cciss/cciss* at runtime. This is best done via a script.
For example:
for x in /proc/driver/cciss/cciss[0-9]*
do
echo "engage scsi" > $x
done
Once the SCSI core is engaged by the driver, it cannot be disengaged
(except by unloading the driver, if it happens to be linked as a module.)
Note also that if no sequential access devices or medium changers are
detected, the SCSI core will not be engaged by the action of the above
script.
Hot plug support for SCSI tape drives
-------------------------------------
Hot plugging of SCSI tape drives is supported, with some caveats.
The cciss driver must be informed that changes to the SCSI bus
have been made. This may be done via the /proc filesystem.
For example:
echo "rescan" > /proc/scsi/cciss0/1
This causes the driver to query the adapter about changes to the
physical SCSI buses and/or fibre channel arbitrated loop and the
driver to make note of any new or removed sequential access devices
or medium changers. The driver will output messages indicating what
devices have been added or removed and the controller, bus, target and
lun used to address the device. It then notifies the SCSI mid layer
of these changes.
Note that the naming convention of the /proc filesystem entries
contains a number in addition to the driver name. (E.g. "cciss0"
instead of just "cciss" which you might expect.)
Note: ONLY sequential access devices and medium changers are presented
as SCSI devices to the SCSI mid layer by the cciss driver. Specifically,
physical SCSI disk drives are NOT presented to the SCSI mid layer. The
physical SCSI disk drives are controlled directly by the array controller
hardware and it is important to prevent the kernel from attempting to directly
access these devices too, as if the array controller were merely a SCSI
controller in the same way that we are allowing it to access SCSI tape drives.
SCSI error handling for tape drives and medium changers
-------------------------------------------------------
The linux SCSI mid layer provides an error handling protocol which
kicks into gear whenever a SCSI command fails to complete within a
certain amount of time (which can vary depending on the command).
The cciss driver participates in this protocol to some extent. The
normal protocol is a four step process. First the device is told
to abort the command. If that doesn't work, the device is reset.
If that doesn't work, the SCSI bus is reset. If that doesn't work
the host bus adapter is reset. Because the cciss driver is a block
driver as well as a SCSI driver and only the tape drives and medium
changers are presented to the SCSI mid layer, and unlike more
straightforward SCSI drivers, disk i/o continues through the block
side during the SCSI error recovery process, the cciss driver only
implements the first two of these actions, aborting the command, and
resetting the device. Additionally, most tape drives will not oblige
in aborting commands, and sometimes it appears they will not even
obey a reset command, though in most circumstances they will. In
the case that the command cannot be aborted and the device cannot be
reset, the device will be set offline.
In the event the error handling code is triggered and a tape drive is
successfully reset or the tardy command is successfully aborted, the
tape drive may still not allow i/o to continue until some command
is issued which positions the tape to a known position. Typically you
must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example)
before i/o can proceed again to a tape drive which was reset.
There is a cciss_tape_cmds module parameter which can be used to make cciss
allocate more commands for use by tape drives. Ordinarily only a few commands
(6) are allocated for tape drives because tape drives are slow and
infrequently used and the primary purpose of Smart Array controllers is to
act as a RAID controller for disk drives, so the vast majority of commands
are allocated for disk devices. However, if you have more than a few tape
drives attached to a smart array, the default number of commands may not be
enought (for example, if you have 8 tape drives, you could only rewind 6
at one time with the default number of commands.) The cciss_tape_cmds module
parameter allows more commands (up to 16 more) to be allocated for use by
tape drives. For example:
insmod cciss.ko cciss_tape_cmds=16
Or, as a kernel boot parameter passed in via grub: cciss.cciss_tape_cmds=8

93
kernel/Documentation/blockdev/cpqarray.txt Normal file
View File

@@ -0,0 +1,93 @@
This driver is for Compaq's SMART2 Intelligent Disk Array Controllers.
Supported Cards:
----------------
This driver is known to work with the following cards:
* SMART (EISA)
* SMART-2/E (EISA)
* SMART-2/P
* SMART-2DH
* SMART-2SL
* SMART-221
* SMART-3100ES
* SMART-3200
* Integrated Smart Array Controller
* SA 4200
* SA 4250ES
* SA 431
* RAID LC2 Controller
It should also work with some really old Disk array adapters, but I am
unable to test against these cards:
* IDA
* IDA-2
* IAES
EISA Controllers:
-----------------
If you want to use an EISA controller you'll have to supply some
modprobe/lilo parameters. If the driver is compiled into the kernel, must
give it the controller's IO port address at boot time (it is not
necessary to specify the IRQ). For example, if you had two SMART-2/E
controllers, in EISA slots 1 and 2 you'd give it a boot argument like
this:
smart2=0x1000,0x2000
If you were loading the driver as a module, you'd give load it like this:
modprobe cpqarray eisa=0x1000,0x2000
You can use EISA and PCI adapters at the same time.
Device Naming:
--------------
You need some entries in /dev for the ida device. MAKEDEV in the /dev
directory can make device nodes for you automatically. The device setup is
as follows:
Major numbers:
72 ida0
73 ida1
74 ida2
75 ida3
76 ida4
77 ida5
78 ida6
79 ida7
Minor numbers:
b7 b6 b5 b4 b3 b2 b1 b0
|----+----| |----+----|
| |
| +-------- Partition ID (0=wholedev, 1-15 partition)
|
+-------------------- Logical Volume number
The device naming scheme is:
/dev/ida/c0d0 Controller 0, disk 0, whole device
/dev/ida/c0d0p1 Controller 0, disk 0, partition 1
/dev/ida/c0d0p2 Controller 0, disk 0, partition 2
/dev/ida/c0d0p3 Controller 0, disk 0, partition 3
/dev/ida/c1d1 Controller 1, disk 1, whole device
/dev/ida/c1d1p1 Controller 1, disk 1, partition 1
/dev/ida/c1d1p2 Controller 1, disk 1, partition 2
/dev/ida/c1d1p3 Controller 1, disk 1, partition 3
Changelog:
==========
10-28-2004 : General cleanup, syntax fixes for in-kernel driver version.
James Nelson <james4765@gmail.com>
1999 : Original Document

588
kernel/Documentation/blockdev/drbd/DRBD-8.3-data-packets.svg Normal file
View File

@@ -0,0 +1,588 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!-- Created with Inkscape (http://www.inkscape.org/) -->
<svg
xmlns:svg="http://www.w3.org/2000/svg"
xmlns="http://www.w3.org/2000/svg"
version="1.0"
width="210mm"
height="297mm"
viewBox="0 0 21000 29700"
id="svg2"
style="fill-rule:evenodd">
<defs
id="defs4" />
<g
id="Default"
style="visibility:visible">
<desc
id="desc180">Master slide</desc>
</g>
<path
d="M 11999,8601 L 11899,8301 L 12099,8301 L 11999,8601 z"
id="path193"
style="fill:#008000;visibility:visible" />
<path
d="M 11999,7801 L 11999,8361"
id="path197"
style="fill:none;stroke:#008000;visibility:visible" />
<path
d="M 7999,10401 L 7899,10101 L 8099,10101 L 7999,10401 z"
id="path209"
style="fill:#008000;visibility:visible" />
<path
d="M 7999,9601 L 7999,10161"
id="path213"
style="fill:none;stroke:#008000;visibility:visible" />
<path
d="M 11999,7801 L 11685,7840 L 11724,7644 L 11999,7801 z"
id="path225"
style="fill:#008000;visibility:visible" />
<path
d="M 7999,7001 L 11764,7754"
id="path229"
style="fill:none;stroke:#008000;visibility:visible" />
<g
transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,-1244.4792,1416.5139)"
id="g245"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<text
id="text247">
<tspan
x="9139 9368 9579 9808 9986 10075 10252 10481 10659 10837 10909"
y="9284"
id="tspan249">RSDataReply</tspan>
</text>
</g>
<path
d="M 7999,9601 L 8281,9458 L 8311,9655 L 7999,9601 z"
id="path259"
style="fill:#008000;visibility:visible" />
<path
d="M 11999,9001 L 8236,9565"
id="path263"
style="fill:none;stroke:#008000;visibility:visible" />
<g
transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,1620.9382,-1639.4947)"
id="g279"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<text
id="text281">
<tspan
x="8743 8972 9132 9310 9573 9801 10013 10242 10419 10597 10775 10953 11114"
y="7023"
id="tspan283">CsumRSRequest</tspan>
</text>
</g>
<text
id="text297"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4034 4263 4440 4703 4881 5042 5219 5397 5503 5681 5842 6003 6180 6341 6519 6625 6803 6980 7158 7336 7497 7586 7692"
y="5707"
id="tspan299">w_make_resync_request()</tspan>
</text>
<text
id="text313"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12199 12305 12483 12644 12821 12893 13054 13232 13410 13638 13816 13905 14083 14311 14489 14667 14845 15023 15184 15272 15378"
y="7806"
id="tspan315">receive_DataRequest()</tspan>
</text>
<text
id="text329"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12199 12377 12483 12660 12838 13016 13194 13372 13549 13621 13799 13977 14083 14261 14438 14616 14794 14955 15133 15294 15399"
y="8606"
id="tspan331">drbd_endio_read_sec()</tspan>
</text>
<text
id="text345"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12191 12420 12597 12775 12953 13131 13309 13486 13664 13825 13986 14164 14426 14604 14710 14871 15049 15154 15332 15510 15616"
y="9007"
id="tspan347">w_e_end_csum_rs_req()</tspan>
</text>
<text
id="text361"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4444 4550 4728 4889 5066 5138 5299 5477 5655 5883 6095 6324 6501 6590 6768 6997 7175 7352 7424 7585 7691"
y="9507"
id="tspan363">receive_RSDataReply()</tspan>
</text>
<text
id="text377"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4457 4635 4741 4918 5096 5274 5452 5630 5807 5879 6057 6235 6464 6569 6641 6730 6908 7086 7247 7425 7585 7691"
y="10407"
id="tspan379">drbd_endio_write_sec()</tspan>
</text>
<text
id="text393"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4647 4825 5003 5180 5358 5536 5714 5820 5997 6158 6319 6497 6658 6836 7013 7085 7263 7424 7585 7691"
y="10907"
id="tspan395">e_end_resync_block()</tspan>
</text>
<path
d="M 11999,11601 L 11685,11640 L 11724,11444 L 11999,11601 z"
id="path405"
style="fill:#000080;visibility:visible" />
<path
d="M 7999,10801 L 11764,11554"
id="path409"
style="fill:none;stroke:#000080;visibility:visible" />
<g
transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,2434.7562,-1674.649)"
id="g425"
style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
<text
id="text427">
<tspan
x="9320 9621 9726 9798 9887 10065 10277 10438"
y="10943"
id="tspan429">WriteAck</tspan>
</text>
</g>
<text
id="text443"
style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12199 12377 12555 12644 12821 13033 13105 13283 13444 13604 13816 13977 14138 14244"
y="11559"
id="tspan445">got_BlockAck()</tspan>
</text>
<text
id="text459"
style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="7999 8304 8541 8778 8990 9201 9413 9650 10001 10120 10357 10594 10806 11043 11280 11398 11703 11940 12152 12364 12601 12812 12931 13049 13261 13498 13710 13947 14065 14302 14540 14658 14777 14870 15107 15225 15437 15649 15886"
y="4877"
id="tspan461">Checksum based Resync, case not in sync</tspan>
</text>
<text
id="text475"
style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="6961 7266 7571 7854 8159 8299 8536 8654 8891 9010 9247 9484 9603 9840 9958 10077 10170 10407"
y="2806"
id="tspan477">DRBD-8.3 data flow</tspan>
</text>
<text
id="text491"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="5190 5419 5596 5774 5952 6113 6291 6468 6646 6824 6985 7146 7324 7586 7692"
y="7005"
id="tspan493">w_e_send_csum()</tspan>
</text>
<path
d="M 11999,17601 L 11899,17301 L 12099,17301 L 11999,17601 z"
id="path503"
style="fill:#008000;visibility:visible" />
<path
d="M 11999,16801 L 11999,17361"
id="path507"
style="fill:none;stroke:#008000;visibility:visible" />
<path
d="M 11999,16801 L 11685,16840 L 11724,16644 L 11999,16801 z"
id="path519"
style="fill:#008000;visibility:visible" />
<path
d="M 7999,16001 L 11764,16754"
id="path523"
style="fill:none;stroke:#008000;visibility:visible" />
<g
transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,-2539.5806,1529.3491)"
id="g539"
style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
<text
id="text541">
<tspan
x="9269 9498 9709 9798 9959 10048 10226 10437 10598 10776"
y="18265"
id="tspan543">RSIsInSync</tspan>
</text>
</g>
<path
d="M 7999,18601 L 8281,18458 L 8311,18655 L 7999,18601 z"
id="path553"
style="fill:#000080;visibility:visible" />
<path
d="M 11999,18001 L 8236,18565"
id="path557"
style="fill:none;stroke:#000080;visibility:visible" />
<g
transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,3461.4027,-1449.3012)"
id="g573"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<text
id="text575">
<tspan
x="8743 8972 9132 9310 9573 9801 10013 10242 10419 10597 10775 10953 11114"
y="16023"
id="tspan577">CsumRSRequest</tspan>
</text>
</g>
<text
id="text591"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12199 12305 12483 12644 12821 12893 13054 13232 13410 13638 13816 13905 14083 14311 14489 14667 14845 15023 15184 15272 15378"
y="16806"
id="tspan593">receive_DataRequest()</tspan>
</text>
<text
id="text607"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12199 12377 12483 12660 12838 13016 13194 13372 13549 13621 13799 13977 14083 14261 14438 14616 14794 14955 15133 15294 15399"
y="17606"
id="tspan609">drbd_endio_read_sec()</tspan>
</text>
<text
id="text623"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12191 12420 12597 12775 12953 13131 13309 13486 13664 13825 13986 14164 14426 14604 14710 14871 15049 15154 15332 15510 15616"
y="18007"
id="tspan625">w_e_end_csum_rs_req()</tspan>
</text>
<text
id="text639"
style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
<tspan
x="5735 5913 6091 6180 6357 6446 6607 6696 6874 7085 7246 7424 7585 7691"
y="18507"
id="tspan641">got_IsInSync()</tspan>
</text>
<text
id="text655"
style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="7999 8304 8541 8778 8990 9201 9413 9650 10001 10120 10357 10594 10806 11043 11280 11398 11703 11940 12152 12364 12601 12812 12931 13049 13261 13498 13710 13947 14065 14159 14396 14514 14726 14937 15175"
y="13877"
id="tspan657">Checksum based Resync, case in sync</tspan>
</text>
<path
d="M 12000,24601 L 11900,24301 L 12100,24301 L 12000,24601 z"
id="path667"
style="fill:#008000;visibility:visible" />
<path
d="M 12000,23801 L 12000,24361"
id="path671"
style="fill:none;stroke:#008000;visibility:visible" />
<path
d="M 8000,26401 L 7900,26101 L 8100,26101 L 8000,26401 z"
id="path683"
style="fill:#008000;visibility:visible" />
<path
d="M 8000,25601 L 8000,26161"
id="path687"
style="fill:none;stroke:#008000;visibility:visible" />
<path
d="M 12000,23801 L 11686,23840 L 11725,23644 L 12000,23801 z"
id="path699"
style="fill:#008000;visibility:visible" />
<path
d="M 8000,23001 L 11765,23754"
id="path703"
style="fill:none;stroke:#008000;visibility:visible" />
<g
transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,-3543.8452,1630.5143)"
id="g719"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<text
id="text721">
<tspan
x="9464 9710 9921 10150 10328 10505 10577"
y="25236"
id="tspan723">OVReply</tspan>
</text>
</g>
<path
d="M 8000,25601 L 8282,25458 L 8312,25655 L 8000,25601 z"
id="path733"
style="fill:#008000;visibility:visible" />
<path
d="M 12000,25001 L 8237,25565"
id="path737"
style="fill:none;stroke:#008000;visibility:visible" />
<g
transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,4918.2801,-1381.2128)"
id="g753"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<text
id="text755">
<tspan
x="9142 9388 9599 9828 10006 10183 10361 10539 10700"
y="23106"
id="tspan757">OVRequest</tspan>
</text>
</g>
<text
id="text771"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12200 12306 12484 12645 12822 12894 13055 13233 13411 13656 13868 14097 14274 14452 14630 14808 14969 15058 15163"
y="23806"
id="tspan773">receive_OVRequest()</tspan>
</text>
<text
id="text787"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12200 12378 12484 12661 12839 13017 13195 13373 13550 13622 13800 13978 14084 14262 14439 14617 14795 14956 15134 15295 15400"
y="24606"
id="tspan789">drbd_endio_read_sec()</tspan>
</text>
<text
id="text803"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12192 12421 12598 12776 12954 13132 13310 13487 13665 13843 14004 14182 14288 14465 14643 14749"
y="25007"
id="tspan805">w_e_end_ov_req()</tspan>
</text>
<text
id="text819"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="5101 5207 5385 5546 5723 5795 5956 6134 6312 6557 6769 6998 7175 7353 7425 7586 7692"
y="25507"
id="tspan821">receive_OVReply()</tspan>
</text>
<text
id="text835"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4492 4670 4776 4953 5131 5309 5487 5665 5842 5914 6092 6270 6376 6554 6731 6909 7087 7248 7426 7587 7692"
y="26407"
id="tspan837">drbd_endio_read_sec()</tspan>
</text>
<text
id="text851"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4902 5131 5308 5486 5664 5842 6020 6197 6375 6553 6714 6892 6998 7175 7353 7425 7586 7692"
y="26907"
id="tspan853">w_e_end_ov_reply()</tspan>
</text>
<path
d="M 12000,27601 L 11686,27640 L 11725,27444 L 12000,27601 z"
id="path863"
style="fill:#000080;visibility:visible" />
<path
d="M 8000,26801 L 11765,27554"
id="path867"
style="fill:none;stroke:#000080;visibility:visible" />
<g
transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,5704.1907,-1328.312)"
id="g883"
style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
<text
id="text885">
<tspan
x="9279 9525 9736 9965 10143 10303 10481 10553"
y="26935"
id="tspan887">OVResult</tspan>
</text>
</g>
<text
id="text901"
style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12200 12378 12556 12645 12822 13068 13280 13508 13686 13847 14025 14097 14185 14291"
y="27559"
id="tspan903">got_OVResult()</tspan>
</text>
<text
id="text917"
style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="8000 8330 8567 8660 8754 8991 9228 9346 9558 9795 9935 10028 10146"
y="21877"
id="tspan919">Online verify</tspan>
</text>
<text
id="text933"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4641 4870 5047 5310 5488 5649 5826 6004 6182 6343 6521 6626 6804 6982 7160 7338 7499 7587 7693"
y="23005"
id="tspan935">w_make_ov_request()</tspan>
</text>
<path
d="M 8000,6500 L 7900,6200 L 8100,6200 L 8000,6500 z"
id="path945"
style="fill:#008000;visibility:visible" />
<path
d="M 8000,5700 L 8000,6260"
id="path949"
style="fill:none;stroke:#008000;visibility:visible" />
<path
d="M 3900,5500 L 3700,5500 L 3700,11000 L 3900,11000"
id="path961"
style="fill:none;stroke:#000000;visibility:visible" />
<path
d="M 3900,14500 L 3700,14500 L 3700,18600 L 3900,18600"
id="path973"
style="fill:none;stroke:#000000;visibility:visible" />
<path
d="M 3900,22800 L 3700,22800 L 3700,26900 L 3900,26900"
id="path985"
style="fill:none;stroke:#000000;visibility:visible" />
<text
id="text1001"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4492 4670 4776 4953 5131 5309 5487 5665 5842 5914 6092 6270 6376 6554 6731 6909 7087 7248 7426 7587 7692"
y="6506"
id="tspan1003">drbd_endio_read_sec()</tspan>
</text>
<text
id="text1017"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4034 4263 4440 4703 4881 5042 5219 5397 5503 5681 5842 6003 6180 6341 6519 6625 6803 6980 7158 7336 7497 7586 7692"
y="14708"
id="tspan1019">w_make_resync_request()</tspan>
</text>
<text
id="text1033"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="5190 5419 5596 5774 5952 6113 6291 6468 6646 6824 6985 7146 7324 7586 7692"
y="16006"
id="tspan1035">w_e_send_csum()</tspan>
</text>
<path
d="M 8000,15501 L 7900,15201 L 8100,15201 L 8000,15501 z"
id="path1045"
style="fill:#008000;visibility:visible" />
<path
d="M 8000,14701 L 8000,15261"
id="path1049"
style="fill:none;stroke:#008000;visibility:visible" />
<text
id="text1065"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4492 4670 4776 4953 5131 5309 5487 5665 5842 5914 6092 6270 6376 6554 6731 6909 7087 7248 7426 7587 7692"
y="15507"
id="tspan1067">drbd_endio_read_sec()</tspan>
</text>
<path
d="M 16100,9000 L 16300,9000 L 16300,7500 L 16100,7500"
id="path1077"
style="fill:none;stroke:#000000;visibility:visible" />
<path
d="M 16100,18000 L 16300,18000 L 16300,16500 L 16100,16500"
id="path1089"
style="fill:none;stroke:#000000;visibility:visible" />
<path
d="M 16100,25000 L 16300,25000 L 16300,23500 L 16100,23500"
id="path1101"
style="fill:none;stroke:#000000;visibility:visible" />
<text
id="text1117"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="2026 2132 2293 2471 2648 2826 3004 3076 3254 3431 3503 3681 3787"
y="5402"
id="tspan1119">rs_begin_io()</tspan>
</text>
<text
id="text1133"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="2027 2133 2294 2472 2649 2827 3005 3077 3255 3432 3504 3682 3788"
y="14402"
id="tspan1135">rs_begin_io()</tspan>
</text>
<text
id="text1149"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="2026 2132 2293 2471 2648 2826 3004 3076 3254 3431 3503 3681 3787"
y="22602"
id="tspan1151">rs_begin_io()</tspan>
</text>
<text
id="text1165"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="1426 1532 1693 1871 2031 2209 2472 2649 2721 2899 2988 3166 3344 3416 3593 3699"
y="11302"
id="tspan1167">rs_complete_io()</tspan>
</text>
<text
id="text1181"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="1526 1632 1793 1971 2131 2309 2572 2749 2821 2999 3088 3266 3444 3516 3693 3799"
y="18931"
id="tspan1183">rs_complete_io()</tspan>
</text>
<text
id="text1197"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="1526 1632 1793 1971 2131 2309 2572 2749 2821 2999 3088 3266 3444 3516 3693 3799"
y="27231"
id="tspan1199">rs_complete_io()</tspan>
</text>
<text
id="text1213"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="16126 16232 16393 16571 16748 16926 17104 17176 17354 17531 17603 17781 17887"
y="7402"
id="tspan1215">rs_begin_io()</tspan>
</text>
<text
id="text1229"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="16127 16233 16394 16572 16749 16927 17105 17177 17355 17532 17604 17782 17888"
y="16331"
id="tspan1231">rs_begin_io()</tspan>
</text>
<text
id="text1245"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="16127 16233 16394 16572 16749 16927 17105 17177 17355 17532 17604 17782 17888"
y="23302"
id="tspan1247">rs_begin_io()</tspan>
</text>
<text
id="text1261"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="16115 16221 16382 16560 16720 16898 17161 17338 17410 17588 17677 17855 18033 18105 18282 18388"
y="9302"
id="tspan1263">rs_complete_io()</tspan>
</text>
<text
id="text1277"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="16115 16221 16382 16560 16720 16898 17161 17338 17410 17588 17677 17855 18033 18105 18282 18388"
y="18331"
id="tspan1279">rs_complete_io()</tspan>
</text>
<text
id="text1293"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="16126 16232 16393 16571 16731 16909 17172 17349 17421 17599 17688 17866 18044 18116 18293 18399"
y="25302"
id="tspan1295">rs_complete_io()</tspan>
</text>
</svg>
Side by Side

After

Width:  |  Height:  |  Size: 22 KiB

459
kernel/Documentation/blockdev/drbd/DRBD-data-packets.svg Normal file
View File

@@ -0,0 +1,459 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!-- Created with Inkscape (http://www.inkscape.org/) -->
<svg
xmlns:svg="http://www.w3.org/2000/svg"
xmlns="http://www.w3.org/2000/svg"
version="1.0"
width="210mm"
height="297mm"
viewBox="0 0 21000 29700"
id="svg2"
style="fill-rule:evenodd">
<defs
id="defs4" />
<g
id="Default"
style="visibility:visible">
<desc
id="desc176">Master slide</desc>
</g>
<path
d="M 11999,19601 L 11899,19301 L 12099,19301 L 11999,19601 z"
id="path189"
style="fill:#008000;visibility:visible" />
<path
d="M 11999,18801 L 11999,19361"
id="path193"
style="fill:none;stroke:#008000;visibility:visible" />
<path
d="M 7999,21401 L 7899,21101 L 8099,21101 L 7999,21401 z"
id="path205"
style="fill:#008000;visibility:visible" />
<path
d="M 7999,20601 L 7999,21161"
id="path209"
style="fill:none;stroke:#008000;visibility:visible" />
<path
d="M 11999,18801 L 11685,18840 L 11724,18644 L 11999,18801 z"
id="path221"
style="fill:#008000;visibility:visible" />
<path
d="M 7999,18001 L 11764,18754"
id="path225"
style="fill:none;stroke:#008000;visibility:visible" />
<text
x="-3023.845"
y="1106.8124"
transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,0,0)"
id="text243"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="6115.1553 6344.1553 6555.1553 6784.1553 6962.1553 7051.1553 7228.1553 7457.1553 7635.1553 7813.1553 7885.1553"
y="21390.812"
id="tspan245">RSDataReply</tspan>
</text>
<path
d="M 7999,20601 L 8281,20458 L 8311,20655 L 7999,20601 z"
id="path255"
style="fill:#008000;visibility:visible" />
<path
d="M 11999,20001 L 8236,20565"
id="path259"
style="fill:none;stroke:#008000;visibility:visible" />
<text
x="3502.5356"
y="-2184.6621"
transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
id="text277"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12321.536 12550.536 12761.536 12990.536 13168.536 13257.536 13434.536 13663.536 13841.536 14019.536 14196.536 14374.536 14535.536"
y="15854.338"
id="tspan279">RSDataRequest</tspan>
</text>
<text
id="text293"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4034 4263 4440 4703 4881 5042 5219 5397 5503 5681 5842 6003 6180 6341 6519 6625 6803 6980 7158 7336 7497 7586 7692"
y="17807"
id="tspan295">w_make_resync_request()</tspan>
</text>
<text
id="text309"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12199 12305 12483 12644 12821 12893 13054 13232 13410 13638 13816 13905 14083 14311 14489 14667 14845 15023 15184 15272 15378"
y="18806"
id="tspan311">receive_DataRequest()</tspan>
</text>
<text
id="text325"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12199 12377 12483 12660 12838 13016 13194 13372 13549 13621 13799 13977 14083 14261 14438 14616 14794 14955 15133 15294 15399"
y="19606"
id="tspan327">drbd_endio_read_sec()</tspan>
</text>
<text
id="text341"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12191 12420 12597 12775 12953 13131 13309 13486 13664 13770 13931 14109 14287 14375 14553 14731 14837 15015 15192 15298"
y="20007"
id="tspan343">w_e_end_rsdata_req()</tspan>
</text>
<text
id="text357"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4444 4550 4728 4889 5066 5138 5299 5477 5655 5883 6095 6324 6501 6590 6768 6997 7175 7352 7424 7585 7691"
y="20507"
id="tspan359">receive_RSDataReply()</tspan>
</text>
<text
id="text373"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4457 4635 4741 4918 5096 5274 5452 5630 5807 5879 6057 6235 6464 6569 6641 6730 6908 7086 7247 7425 7585 7691"
y="21407"
id="tspan375">drbd_endio_write_sec()</tspan>
</text>
<text
id="text389"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4647 4825 5003 5180 5358 5536 5714 5820 5997 6158 6319 6497 6658 6836 7013 7085 7263 7424 7585 7691"
y="21907"
id="tspan391">e_end_resync_block()</tspan>
</text>
<path
d="M 11999,22601 L 11685,22640 L 11724,22444 L 11999,22601 z"
id="path401"
style="fill:#000080;visibility:visible" />
<path
d="M 7999,21801 L 11764,22554"
id="path405"
style="fill:none;stroke:#000080;visibility:visible" />
<text
x="4290.3008"
y="-2369.6162"
transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
id="text423"
style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
<tspan
x="13610.301 13911.301 14016.301 14088.301 14177.301 14355.301 14567.301 14728.301"
y="19573.385"
id="tspan425">WriteAck</tspan>
</text>
<text
id="text439"
style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12199 12377 12555 12644 12821 13033 13105 13283 13444 13604 13816 13977 14138 14244"
y="22559"
id="tspan441">got_BlockAck()</tspan>
</text>
<text
id="text455"
style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="7999 8304 8541 8753 8964 9201 9413 9531 9769 9862 10099 10310 10522 10734 10852 10971 11208 11348 11585 11822"
y="16877"
id="tspan457">Resync blocks, 4-32K</tspan>
</text>
<path
d="M 12000,7601 L 11900,7301 L 12100,7301 L 12000,7601 z"
id="path467"
style="fill:#008000;visibility:visible" />
<path
d="M 12000,6801 L 12000,7361"
id="path471"
style="fill:none;stroke:#008000;visibility:visible" />
<path
d="M 12000,6801 L 11686,6840 L 11725,6644 L 12000,6801 z"
id="path483"
style="fill:#008000;visibility:visible" />
<path
d="M 8000,6001 L 11765,6754"
id="path487"
style="fill:none;stroke:#008000;visibility:visible" />
<text
x="-1288.1796"
y="1279.7666"
transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,0,0)"
id="text505"
style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
<tspan
x="8174.8208 8475.8203 8580.8203 8652.8203 8741.8203 8919.8203 9131.8203 9292.8203"
y="9516.7666"
id="tspan507">WriteAck</tspan>
</text>
<path
d="M 8000,8601 L 8282,8458 L 8312,8655 L 8000,8601 z"
id="path517"
style="fill:#000080;visibility:visible" />
<path
d="M 12000,8001 L 8237,8565"
id="path521"
style="fill:none;stroke:#000080;visibility:visible" />
<text
x="1065.6655"
y="-2097.7664"
transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
id="text539"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="10682.666 10911.666 11088.666 11177.666"
y="4107.2339"
id="tspan541">Data</tspan>
</text>
<text
id="text555"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4746 4924 5030 5207 5385 5563 5826 6003 6164 6342 6520 6626 6803 6981 7159 7337 7498 7587 7692"
y="5505"
id="tspan557">drbd_make_request()</tspan>
</text>
<text
id="text571"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12200 12306 12484 12645 12822 12894 13055 13233 13411 13639 13817 13906 14084 14190"
y="6806"
id="tspan573">receive_Data()</tspan>
</text>
<text
id="text587"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12200 12378 12484 12661 12839 13017 13195 13373 13550 13622 13800 13978 14207 14312 14384 14473 14651 14829 14990 15168 15328 15434"
y="7606"
id="tspan589">drbd_endio_write_sec()</tspan>
</text>
<text
id="text603"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12192 12370 12548 12725 12903 13081 13259 13437 13509 13686 13847 14008 14114"
y="8007"
id="tspan605">e_end_block()</tspan>
</text>
<text
id="text619"
style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
<tspan
x="5647 5825 6003 6092 6269 6481 6553 6731 6892 7052 7264 7425 7586 7692"
y="8606"
id="tspan621">got_BlockAck()</tspan>
</text>
<text
id="text635"
style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="8000 8305 8542 8779 9016 9109 9346 9486 9604 9956 10049 10189 10328 10565 10705 10942 11179 11298 11603 11742 11835 11954 12191 12310 12428 12665 12902 13139 13279 13516 13753"
y="4877"
id="tspan637">Regular mirrored write, 512-32K</tspan>
</text>
<text
id="text651"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="5381 5610 5787 5948 6126 6304 6482 6659 6837 7015 7087 7265 7426 7587 7692"
y="6003"
id="tspan653">w_send_dblock()</tspan>
</text>
<path
d="M 8000,6800 L 7900,6500 L 8100,6500 L 8000,6800 z"
id="path663"
style="fill:#008000;visibility:visible" />
<path
d="M 8000,6000 L 8000,6560"
id="path667"
style="fill:none;stroke:#008000;visibility:visible" />
<text
id="text683"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4602 4780 4886 5063 5241 5419 5597 5775 5952 6024 6202 6380 6609 6714 6786 6875 7053 7231 7409 7515 7587 7692"
y="6905"
id="tspan685">drbd_endio_write_pri()</tspan>
</text>
<path
d="M 12000,13602 L 11900,13302 L 12100,13302 L 12000,13602 z"
id="path695"
style="fill:#008000;visibility:visible" />
<path
d="M 12000,12802 L 12000,13362"
id="path699"
style="fill:none;stroke:#008000;visibility:visible" />
<path
d="M 12000,12802 L 11686,12841 L 11725,12645 L 12000,12802 z"
id="path711"
style="fill:#008000;visibility:visible" />
<path
d="M 8000,12002 L 11765,12755"
id="path715"
style="fill:none;stroke:#008000;visibility:visible" />
<text
x="-2155.5266"
y="1201.5964"
transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,0,0)"
id="text733"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="7202.4736 7431.4736 7608.4736 7697.4736 7875.4736 8104.4736 8282.4736 8459.4736 8531.4736"
y="15454.597"
id="tspan735">DataReply</tspan>
</text>
<path
d="M 8000,14602 L 8282,14459 L 8312,14656 L 8000,14602 z"
id="path745"
style="fill:#008000;visibility:visible" />
<path
d="M 12000,14002 L 8237,14566"
id="path749"
style="fill:none;stroke:#008000;visibility:visible" />
<text
x="2280.3804"
y="-2103.2141"
transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
id="text767"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="11316.381 11545.381 11722.381 11811.381 11989.381 12218.381 12396.381 12573.381 12751.381 12929.381 13090.381"
y="9981.7861"
id="tspan769">DataRequest</tspan>
</text>
<text
id="text783"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="4746 4924 5030 5207 5385 5563 5826 6003 6164 6342 6520 6626 6803 6981 7159 7337 7498 7587 7692"
y="11506"
id="tspan785">drbd_make_request()</tspan>
</text>
<text
id="text799"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12200 12306 12484 12645 12822 12894 13055 13233 13411 13639 13817 13906 14084 14312 14490 14668 14846 15024 15185 15273 15379"
y="12807"
id="tspan801">receive_DataRequest()</tspan>
</text>
<text
id="text815"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12200 12378 12484 12661 12839 13017 13195 13373 13550 13622 13800 13978 14084 14262 14439 14617 14795 14956 15134 15295 15400"
y="13607"
id="tspan817">drbd_endio_read_sec()</tspan>
</text>
<text
id="text831"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="12192 12421 12598 12776 12954 13132 13310 13487 13665 13843 14021 14110 14288 14465 14571 14749 14927 15033"
y="14008"
id="tspan833">w_e_end_data_req()</tspan>
</text>
<g
id="g835"
style="visibility:visible">
<desc
id="desc837">Drawing</desc>
<text
id="text847"
style="font-size:318px;font-weight:400;fill:#008000;font-family:Helvetica embedded">
<tspan
x="4885 4991 5169 5330 5507 5579 5740 5918 6096 6324 6502 6591 6769 6997 7175 7353 7425 7586 7692"
y="14607"
id="tspan849">receive_DataReply()</tspan>
</text>
</g>
<text
id="text863"
style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="8000 8305 8398 8610 8821 8914 9151 9363 9575 9693 9833 10070 10307 10544 10663 10781 11018 11255 11493 11632 11869 12106"
y="10878"
id="tspan865">Diskless read, 512-32K</tspan>
</text>
<text
id="text879"
style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="5029 5258 5435 5596 5774 5952 6130 6307 6413 6591 6769 6947 7125 7230 7408 7586 7692"
y="12004"
id="tspan881">w_send_read_req()</tspan>
</text>
<text
id="text895"
style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="6961 7266 7571 7854 8159 8278 8515 8633 8870 9107 9226 9463 9581 9700 9793 10030"
y="2806"
id="tspan897">DRBD 8 data flow</tspan>
</text>
<path
d="M 3900,5300 L 3700,5300 L 3700,7000 L 3900,7000"
id="path907"
style="fill:none;stroke:#000000;visibility:visible" />
<path
d="M 3900,17600 L 3700,17600 L 3700,22000 L 3900,22000"
id="path919"
style="fill:none;stroke:#000000;visibility:visible" />
<path
d="M 16100,20000 L 16300,20000 L 16300,18500 L 16100,18500"
id="path931"
style="fill:none;stroke:#000000;visibility:visible" />
<text
id="text947"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="2126 2304 2376 2554 2731 2909 3087 3159 3337 3515 3587 3764 3870"
y="5202"
id="tspan949">al_begin_io()</tspan>
</text>
<text
id="text963"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="1632 1810 1882 2060 2220 2398 2661 2839 2910 3088 3177 3355 3533 3605 3783 3888"
y="7331"
id="tspan965">al_complete_io()</tspan>
</text>
<text
id="text979"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="2126 2232 2393 2571 2748 2926 3104 3176 3354 3531 3603 3781 3887"
y="17431"
id="tspan981">rs_begin_io()</tspan>
</text>
<text
id="text995"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="1626 1732 1893 2071 2231 2409 2672 2849 2921 3099 3188 3366 3544 3616 3793 3899"
y="22331"
id="tspan997">rs_complete_io()</tspan>
</text>
<text
id="text1011"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="16027 16133 16294 16472 16649 16827 17005 17077 17255 17432 17504 17682 17788"
y="18402"
id="tspan1013">rs_begin_io()</tspan>
</text>
<text
id="text1027"
style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
<tspan
x="16115 16221 16382 16560 16720 16898 17161 17338 17410 17588 17677 17855 18033 18105 18282 18388"
y="20331"
id="tspan1029">rs_complete_io()</tspan>
</text>
</svg>
Side by Side

After

Width:  |  Height:  |  Size: 17 KiB

16
kernel/Documentation/blockdev/drbd/README.txt Normal file
View File

@@ -0,0 +1,16 @@
Description
DRBD is a shared-nothing, synchronously replicated block device. It
is designed to serve as a building block for high availability
clusters and in this context, is a "drop-in" replacement for shared
storage. Simplistically, you could see it as a network RAID 1.
Please visit http://www.drbd.org to find out more.
The here included files are intended to help understand the implementation
DRBD-8.3-data-packets.svg, DRBD-data-packets.svg
relates some functions, and write packets.
conn-states-8.dot, disk-states-8.dot, node-states-8.dot
The sub graphs of DRBD's state transitions

18
kernel/Documentation/blockdev/drbd/conn-states-8.dot Normal file
View File

@@ -0,0 +1,18 @@
digraph conn_states {
StandAllone -> WFConnection [ label = "ioctl_set_net()" ]
WFConnection -> Unconnected [ label = "unable to bind()" ]
WFConnection -> WFReportParams [ label = "in connect() after accept" ]
WFReportParams -> StandAllone [ label = "checks in receive_param()" ]
WFReportParams -> Connected [ label = "in receive_param()" ]
WFReportParams -> WFBitMapS [ label = "sync_handshake()" ]
WFReportParams -> WFBitMapT [ label = "sync_handshake()" ]
WFBitMapS -> SyncSource [ label = "receive_bitmap()" ]
WFBitMapT -> SyncTarget [ label = "receive_bitmap()" ]
SyncSource -> Connected
SyncTarget -> Connected
SyncSource -> PausedSyncS
SyncTarget -> PausedSyncT
PausedSyncS -> SyncSource
PausedSyncT -> SyncTarget
Connected -> WFConnection [ label = "* on network error" ]
}

16
kernel/Documentation/blockdev/drbd/disk-states-8.dot Normal file
View File

@@ -0,0 +1,16 @@
digraph disk_states {
Diskless -> Inconsistent [ label = "ioctl_set_disk()" ]
Diskless -> Consistent [ label = "ioctl_set_disk()" ]
Diskless -> Outdated [ label = "ioctl_set_disk()" ]
Consistent -> Outdated [ label = "receive_param()" ]
Consistent -> UpToDate [ label = "receive_param()" ]
Consistent -> Inconsistent [ label = "start resync" ]
Outdated -> Inconsistent [ label = "start resync" ]
UpToDate -> Inconsistent [ label = "ioctl_replicate" ]
Inconsistent -> UpToDate [ label = "resync completed" ]
Consistent -> Failed [ label = "io completion error" ]
Outdated -> Failed [ label = "io completion error" ]
UpToDate -> Failed [ label = "io completion error" ]
Inconsistent -> Failed [ label = "io completion error" ]
Failed -> Diskless [ label = "sending notify to peer" ]
}

85
kernel/Documentation/blockdev/drbd/drbd-connection-state-overview.dot Normal file
View File

@@ -0,0 +1,85 @@
// vim: set sw=2 sts=2 :
digraph {
rankdir=BT
bgcolor=white
node [shape=plaintext]
node [fontcolor=black]
StandAlone [ style=filled,fillcolor=gray,label=StandAlone ]
node [fontcolor=lightgray]
Unconnected [ label=Unconnected ]
CommTrouble [ shape=record,
label="{communication loss|{Timeout|BrokenPipe|NetworkFailure}}" ]
node [fontcolor=gray]
subgraph cluster_try_connect {
label="try to connect, handshake"
rank=max
WFConnection [ label=WFConnection ]
WFReportParams [ label=WFReportParams ]
}
TearDown [ label=TearDown ]
Connected [ label=Connected,style=filled,fillcolor=green,fontcolor=black ]
node [fontcolor=lightblue]
StartingSyncS [ label=StartingSyncS ]
StartingSyncT [ label=StartingSyncT ]
subgraph cluster_bitmap_exchange {
node [fontcolor=red]
fontcolor=red
label="new application (WRITE?) requests blocked\lwhile bitmap is exchanged"
WFBitMapT [ label=WFBitMapT ]
WFSyncUUID [ label=WFSyncUUID ]
WFBitMapS [ label=WFBitMapS ]
}
node [fontcolor=blue]
cluster_resync [ shape=record,label="{<any>resynchronisation process running\l'concurrent' application requests allowed|{{<T>PausedSyncT\nSyncTarget}|{<S>PausedSyncS\nSyncSource}}}" ]
node [shape=box,fontcolor=black]
// drbdadm [label="drbdadm connect"]
// handshake [label="drbd_connect()\ndrbd_do_handshake\ndrbd_sync_handshake() etc."]
// comm_error [label="communication trouble"]
//
// edges
// --------------------------------------
StandAlone -> Unconnected [ label="drbdadm connect" ]
Unconnected -> StandAlone [ label="drbdadm disconnect\lor serious communication trouble" ]
Unconnected -> WFConnection [ label="receiver thread is started" ]
WFConnection -> WFReportParams [ headlabel="accept()\land/or \lconnect()\l" ]
WFReportParams -> StandAlone [ label="during handshake\lpeers do not agree\labout something essential" ]
WFReportParams -> Connected [ label="data identical\lno sync needed",color=green,fontcolor=green ]
WFReportParams -> WFBitMapS
WFReportParams -> WFBitMapT
WFBitMapT -> WFSyncUUID [minlen=0.1,constraint=false]
WFBitMapS -> cluster_resync:S
WFSyncUUID -> cluster_resync:T
edge [color=green]
cluster_resync:any -> Connected [ label="resnyc done",fontcolor=green ]
edge [color=red]
WFReportParams -> CommTrouble
Connected -> CommTrouble
cluster_resync:any -> CommTrouble
edge [color=black]
CommTrouble -> Unconnected [label="receiver thread is stopped" ]
}

14
kernel/Documentation/blockdev/drbd/node-states-8.dot Normal file
View File

@@ -0,0 +1,14 @@
digraph node_states {
Secondary -> Primary [ label = "ioctl_set_state()" ]
Primary -> Secondary [ label = "ioctl_set_state()" ]
}
digraph peer_states {
Secondary -> Primary [ label = "recv state packet" ]
Primary -> Secondary [ label = "recv state packet" ]
Primary -> Unknown [ label = "connection lost" ]
Secondary -> Unknown [ label = "connection lost" ]
Unknown -> Primary [ label = "connected" ]
Unknown -> Secondary [ label = "connected" ]
}

245
kernel/Documentation/blockdev/floppy.txt Normal file
View File

@@ -0,0 +1,245 @@
This file describes the floppy driver.
FAQ list:
=========
A FAQ list may be found in the fdutils package (see below), and also
at <http://fdutils.linux.lu/faq.html>.
LILO configuration options (Thinkpad users, read this)
======================================================
The floppy driver is configured using the 'floppy=' option in
lilo. This option can be typed at the boot prompt, or entered in the
lilo configuration file.
Example: If your kernel is called linux-2.6.9, type the following line
at the lilo boot prompt (if you have a thinkpad):
linux-2.6.9 floppy=thinkpad
You may also enter the following line in /etc/lilo.conf, in the description
of linux-2.6.9:
append = "floppy=thinkpad"
Several floppy related options may be given, example:
linux-2.6.9 floppy=daring floppy=two_fdc
append = "floppy=daring floppy=two_fdc"
If you give options both in the lilo config file and on the boot
prompt, the option strings of both places are concatenated, the boot
prompt options coming last. That's why there are also options to
restore the default behavior.
Module configuration options
============================
If you use the floppy driver as a module, use the following syntax:
modprobe floppy <options>
Example:
modprobe floppy omnibook messages
If you need certain options enabled every time you load the floppy driver,
you can put:
options floppy omnibook messages
in a configuration file in /etc/modprobe.d/.
The floppy driver related options are:
floppy=asus_pci
Sets the bit mask to allow only units 0 and 1. (default)
floppy=daring
Tells the floppy driver that you have a well behaved floppy controller.
This allows more efficient and smoother operation, but may fail on
certain controllers. This may speed up certain operations.
floppy=0,daring
Tells the floppy driver that your floppy controller should be used
with caution.
floppy=one_fdc
Tells the floppy driver that you have only one floppy controller.
(default)
floppy=two_fdc
floppy=<address>,two_fdc
Tells the floppy driver that you have two floppy controllers.
The second floppy controller is assumed to be at <address>.
This option is not needed if the second controller is at address
0x370, and if you use the 'cmos' option.
floppy=thinkpad
Tells the floppy driver that you have a Thinkpad. Thinkpads use an
inverted convention for the disk change line.
floppy=0,thinkpad
Tells the floppy driver that you don't have a Thinkpad.
floppy=omnibook
floppy=nodma
Tells the floppy driver not to use Dma for data transfers.
This is needed on HP Omnibooks, which don't have a workable
DMA channel for the floppy driver. This option is also useful
if you frequently get "Unable to allocate DMA memory" messages.
Indeed, dma memory needs to be continuous in physical memory,
and is thus harder to find, whereas non-dma buffers may be
allocated in virtual memory. However, I advise against this if
you have an FDC without a FIFO (8272A or 82072). 82072A and
later are OK. You also need at least a 486 to use nodma.
If you use nodma mode, I suggest you also set the FIFO
threshold to 10 or lower, in order to limit the number of data
transfer interrupts.
If you have a FIFO-able FDC, the floppy driver automatically
falls back on non DMA mode if no DMA-able memory can be found.
If you want to avoid this, explicitly ask for 'yesdma'.
floppy=yesdma
Tells the floppy driver that a workable DMA channel is available.
(default)
floppy=nofifo
Disables the FIFO entirely. This is needed if you get "Bus
master arbitration error" messages from your Ethernet card (or
from other devices) while accessing the floppy.
floppy=usefifo
Enables the FIFO. (default)
floppy=<threshold>,fifo_depth
Sets the FIFO threshold. This is mostly relevant in DMA
mode. If this is higher, the floppy driver tolerates more
interrupt latency, but it triggers more interrupts (i.e. it
imposes more load on the rest of the system). If this is
lower, the interrupt latency should be lower too (faster
processor). The benefit of a lower threshold is less
interrupts.
To tune the fifo threshold, switch on over/underrun messages
using 'floppycontrol --messages'. Then access a floppy
disk. If you get a huge amount of "Over/Underrun - retrying"
messages, then the fifo threshold is too low. Try with a
higher value, until you only get an occasional Over/Underrun.
It is a good idea to compile the floppy driver as a module
when doing this tuning. Indeed, it allows to try different
fifo values without rebooting the machine for each test. Note
that you need to do 'floppycontrol --messages' every time you
re-insert the module.
Usually, tuning the fifo threshold should not be needed, as
the default (0xa) is reasonable.
floppy=<drive>,<type>,cmos
Sets the CMOS type of <drive> to <type>. This is mandatory if
you have more than two floppy drives (only two can be
described in the physical CMOS), or if your BIOS uses
non-standard CMOS types. The CMOS types are:
0 - Use the value of the physical CMOS
1 - 5 1/4 DD
2 - 5 1/4 HD
3 - 3 1/2 DD
4 - 3 1/2 HD
5 - 3 1/2 ED
6 - 3 1/2 ED
16 - unknown or not installed
(Note: there are two valid types for ED drives. This is because 5 was
initially chosen to represent floppy *tapes*, and 6 for ED drives.
AMI ignored this, and used 5 for ED drives. That's why the floppy
driver handles both.)
floppy=unexpected_interrupts
Print a warning message when an unexpected interrupt is received.
(default)
floppy=no_unexpected_interrupts
floppy=L40SX
Don't print a message when an unexpected interrupt is received. This
is needed on IBM L40SX laptops in certain video modes. (There seems
to be an interaction between video and floppy. The unexpected
interrupts affect only performance, and can be safely ignored.)
floppy=broken_dcl
Don't use the disk change line, but assume that the disk was
changed whenever the device node is reopened. Needed on some
boxes where the disk change line is broken or unsupported.
This should be regarded as a stopgap measure, indeed it makes
floppy operation less efficient due to unneeded cache
flushings, and slightly more unreliable. Please verify your
cable, connection and jumper settings if you have any DCL
problems. However, some older drives, and also some laptops
are known not to have a DCL.
floppy=debug
Print debugging messages.
floppy=messages
Print informational messages for some operations (disk change
notifications, warnings about over and underruns, and about
autodetection).
floppy=silent_dcl_clear
Uses a less noisy way to clear the disk change line (which
doesn't involve seeks). Implied by 'daring' option.
floppy=<nr>,irq
Sets the floppy IRQ to <nr> instead of 6.
floppy=<nr>,dma
Sets the floppy DMA channel to <nr> instead of 2.
floppy=slow
Use PS/2 stepping rate:
" PS/2 floppies have much slower step rates than regular floppies.
It's been recommended that take about 1/4 of the default speed
in some more extreme cases."
Supporting utilities and additional documentation:
==================================================
Additional parameters of the floppy driver can be configured at
runtime. Utilities which do this can be found in the fdutils package.
This package also contains a new version of mtools which allows to
access high capacity disks (up to 1992K on a high density 3 1/2 disk!).
It also contains additional documentation about the floppy driver.
The latest version can be found at fdutils homepage:
http://fdutils.linux.lu
The fdutils releases can be found at:
http://fdutils.linux.lu/download.html
http://www.tux.org/pub/knaff/fdutils/
ftp://metalab.unc.edu/pub/Linux/utils/disk-management/
Reporting problems about the floppy driver
==========================================
If you have a question or a bug report about the floppy driver, mail
me at Alain.Knaff@poboxes.com . If you post to Usenet, preferably use
comp.os.linux.hardware. As the volume in these groups is rather high,
be sure to include the word "floppy" (or "FLOPPY") in the subject
line. If the reported problem happens when mounting floppy disks, be
sure to mention also the type of the filesystem in the subject line.
Be sure to read the FAQ before mailing/posting any bug reports!
Alain
Changelog
=========
10-30-2004 : Cleanup, updating, add reference to module configuration.
James Nelson <james4765@gmail.com>
6-3-2000 : Original Document

84
kernel/Documentation/blockdev/mflash.txt Normal file
View File

@@ -0,0 +1,84 @@
This document describes m[g]flash support in linux.
Contents
1. Overview
2. Reserved area configuration
3. Example of mflash platform driver registration
1. Overview
Mflash and gflash are embedded flash drive. The only difference is mflash is
MCP(Multi Chip Package) device. These two device operate exactly same way.
So the rest mflash repersents mflash and gflash altogether.
Internally, mflash has nand flash and other hardware logics and supports
2 different operation (ATA, IO) modes. ATA mode doesn't need any new
driver and currently works well under standard IDE subsystem. Actually it's
one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have
IDE interface.
Followings are brief descriptions about IO mode.
A. IO mode based on ATA protocol and uses some custom command. (read confirm,
write confirm)
B. IO mode uses SRAM bus interface.
C. IO mode supports 4kB boot area, so host can boot from mflash.
2. Reserved area configuration
If host boot from mflash, usually needs raw area for boot loader image. All of
the mflash's block device operation will be taken this value as start offset.
Note that boot loader's size of reserved area and kernel configuration value
must be same.
3. Example of mflash platform driver registration
Working mflash is very straight forward. Adding platform device stuff to board
configuration file is all. Here is some pseudo example.
static struct mg_drv_data mflash_drv_data = {
/* If you want to polling driver set to 1 */
.use_polling = 0,
/* device attribution */
.dev_attr = MG_BOOT_DEV
};
static struct resource mg_mflash_rsc[] = {
/* Base address of mflash */
[0] = {
.start = 0x08000000,
.end = 0x08000000 + SZ_64K - 1,
.flags = IORESOURCE_MEM
},
/* mflash interrupt pin */
[1] = {
.start = IRQ_GPIO(84),
.end = IRQ_GPIO(84),
.flags = IORESOURCE_IRQ
},
/* mflash reset pin */
[2] = {
.start = 43,
.end = 43,
.name = MG_RST_PIN,
.flags = IORESOURCE_IO
},
/* mflash reset-out pin
* If you use mflash as storage device (i.e. other than MG_BOOT_DEV),
* should assign this */
[3] = {
.start = 51,
.end = 51,
.name = MG_RSTOUT_PIN,
.flags = IORESOURCE_IO
}
};
static struct platform_device mflash_dev = {
.name = MG_DEV_NAME,
.id = -1,
.dev = {
.platform_data = &mflash_drv_data,
},
.num_resources = ARRAY_SIZE(mg_mflash_rsc),
.resource = mg_mflash_rsc
};
platform_device_register(&mflash_dev);

47
kernel/Documentation/blockdev/nbd.txt Normal file
View File

@@ -0,0 +1,47 @@
Network Block Device (TCP version)
What is it: With this compiled in the kernel (or as a module), Linux
can use a remote server as one of its block devices. So every time
the client computer wants to read, e.g., /dev/nb0, it sends a
request over TCP to the server, which will reply with the data read.
This can be used for stations with low disk space (or even diskless -
if you boot from floppy) to borrow disk space from another computer.
Unlike NFS, it is possible to put any filesystem on it, etc. It should
even be possible to use NBD as a root filesystem (I've never tried),
but it requires a user-level program to be in the initrd to start.
It also allows you to run block-device in user land (making server
and client physically the same computer, communicating using loopback).
Current state: It currently works. Network block device is stable.
I originally thought that it was impossible to swap over TCP. It
turned out not to be true - swapping over TCP now works and seems
to be deadlock-free, but it requires heavy patches into Linux's
network layer.
For more information, or to download the nbd-client and nbd-server
tools, go to http://nbd.sf.net/.
Howto: To setup nbd, you can simply do the following:
First, serve a device or file from a remote server:
nbd-server <port-number> <device-or-file-to-serve-to-client>
e.g.,
root@server1 # nbd-server 1234 /dev/sdb1
(serves sdb1 partition on TCP port 1234)
Then, on the local (client) system:
nbd-client <server-name-or-IP> <server-port-number> /dev/nb[0-n]
e.g.,
root@client1 # nbd-client server1 1234 /dev/nb0
(creates the nb0 device on client1)
The nbd kernel module need only be installed on the client
system, as the nbd-server is completely in userspace. In fact,
the nbd-server has been successfully ported to other operating
systems, including Windows.

417
kernel/Documentation/blockdev/paride.txt Normal file
View File

@@ -0,0 +1,417 @@
Linux and parallel port IDE devices
PARIDE v1.03 (c) 1997-8 Grant Guenther <grant@torque.net>
1. Introduction
Owing to the simplicity and near universality of the parallel port interface
to personal computers, many external devices such as portable hard-disk,
CD-ROM, LS-120 and tape drives use the parallel port to connect to their
host computer. While some devices (notably scanners) use ad-hoc methods
to pass commands and data through the parallel port interface, most
external devices are actually identical to an internal model, but with
a parallel-port adapter chip added in. Some of the original parallel port
adapters were little more than mechanisms for multiplexing a SCSI bus.
(The Iomega PPA-3 adapter used in the ZIP drives is an example of this
approach). Most current designs, however, take a different approach.
The adapter chip reproduces a small ISA or IDE bus in the external device
and the communication protocol provides operations for reading and writing
device registers, as well as data block transfer functions. Sometimes,
the device being addressed via the parallel cable is a standard SCSI
controller like an NCR 5380. The "ditto" family of external tape
drives use the ISA replicator to interface a floppy disk controller,
which is then connected to a floppy-tape mechanism. The vast majority
of external parallel port devices, however, are now based on standard
IDE type devices, which require no intermediate controller. If one
were to open up a parallel port CD-ROM drive, for instance, one would
find a standard ATAPI CD-ROM drive, a power supply, and a single adapter
that interconnected a standard PC parallel port cable and a standard
IDE cable. It is usually possible to exchange the CD-ROM device with
any other device using the IDE interface.
The document describes the support in Linux for parallel port IDE
devices. It does not cover parallel port SCSI devices, "ditto" tape
drives or scanners. Many different devices are supported by the
parallel port IDE subsystem, including:
MicroSolutions backpack CD-ROM
MicroSolutions backpack PD/CD
MicroSolutions backpack hard-drives
MicroSolutions backpack 8000t tape drive
SyQuest EZ-135, EZ-230 & SparQ drives
Avatar Shark
Imation Superdisk LS-120
Maxell Superdisk LS-120
FreeCom Power CD
Hewlett-Packard 5GB and 8GB tape drives
Hewlett-Packard 7100 and 7200 CD-RW drives
as well as most of the clone and no-name products on the market.
To support such a wide range of devices, PARIDE, the parallel port IDE
subsystem, is actually structured in three parts. There is a base
paride module which provides a registry and some common methods for
accessing the parallel ports. The second component is a set of
high-level drivers for each of the different types of supported devices:
pd IDE disk
pcd ATAPI CD-ROM
pf ATAPI disk
pt ATAPI tape
pg ATAPI generic
(Currently, the pg driver is only used with CD-R drives).
The high-level drivers function according to the relevant standards.
The third component of PARIDE is a set of low-level protocol drivers
for each of the parallel port IDE adapter chips. Thanks to the interest
and encouragement of Linux users from many parts of the world,
support is available for almost all known adapter protocols:
aten ATEN EH-100 (HK)
bpck Microsolutions backpack (US)
comm DataStor (old-type) "commuter" adapter (TW)
dstr DataStor EP-2000 (TW)
epat Shuttle EPAT (UK)
epia Shuttle EPIA (UK)
fit2 FIT TD-2000 (US)
fit3 FIT TD-3000 (US)
friq Freecom IQ cable (DE)
frpw Freecom Power (DE)
kbic KingByte KBIC-951A and KBIC-971A (TW)
ktti KT Technology PHd adapter (SG)
on20 OnSpec 90c20 (US)
on26 OnSpec 90c26 (US)
2. Using the PARIDE subsystem
While configuring the Linux kernel, you may choose either to build
the PARIDE drivers into your kernel, or to build them as modules.
In either case, you will need to select "Parallel port IDE device support"
as well as at least one of the high-level drivers and at least one
of the parallel port communication protocols. If you do not know
what kind of parallel port adapter is used in your drive, you could
begin by checking the file names and any text files on your DOS
installation floppy. Alternatively, you can look at the markings on
the adapter chip itself. That's usually sufficient to identify the
correct device.
You can actually select all the protocol modules, and allow the PARIDE
subsystem to try them all for you.
For the "brand-name" products listed above, here are the protocol
and high-level drivers that you would use:
Manufacturer Model Driver Protocol
MicroSolutions CD-ROM pcd bpck
MicroSolutions PD drive pf bpck
MicroSolutions hard-drive pd bpck
MicroSolutions 8000t tape pt bpck
SyQuest EZ, SparQ pd epat
Imation Superdisk pf epat
Maxell Superdisk pf friq
Avatar Shark pd epat
FreeCom CD-ROM pcd frpw
Hewlett-Packard 5GB Tape pt epat
Hewlett-Packard 7200e (CD) pcd epat
Hewlett-Packard 7200e (CD-R) pg epat
2.1 Configuring built-in drivers
We recommend that you get to know how the drivers work and how to
configure them as loadable modules, before attempting to compile a
kernel with the drivers built-in.
If you built all of your PARIDE support directly into your kernel,
and you have just a single parallel port IDE device, your kernel should
locate it automatically for you. If you have more than one device,
you may need to give some command line options to your bootloader
(eg: LILO), how to do that is beyond the scope of this document.
The high-level drivers accept a number of command line parameters, all
of which are documented in the source files in linux/drivers/block/paride.
By default, each driver will automatically try all parallel ports it
can find, and all protocol types that have been installed, until it finds
a parallel port IDE adapter. Once it finds one, the probe stops. So,
if you have more than one device, you will need to tell the drivers
how to identify them. This requires specifying the port address, the
protocol identification number and, for some devices, the drive's
chain ID. While your system is booting, a number of messages are
displayed on the console. Like all such messages, they can be
reviewed with the 'dmesg' command. Among those messages will be
some lines like:
paride: bpck registered as protocol 0
paride: epat registered as protocol 1
The numbers will always be the same until you build a new kernel with
different protocol selections. You should note these numbers as you
will need them to identify the devices.
If you happen to be using a MicroSolutions backpack device, you will
also need to know the unit ID number for each drive. This is usually
the last two digits of the drive's serial number (but read MicroSolutions'
documentation about this).
As an example, let's assume that you have a MicroSolutions PD/CD drive
with unit ID number 36 connected to the parallel port at 0x378, a SyQuest
EZ-135 connected to the chained port on the PD/CD drive and also an
Imation Superdisk connected to port 0x278. You could give the following
options on your boot command:
pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36
In the last option, pf.drive1 configures device /dev/pf1, the 0x378
is the parallel port base address, the 0 is the protocol registration
number and 36 is the chain ID.
Please note: while PARIDE will work both with and without the
PARPORT parallel port sharing system that is included by the
"Parallel port support" option, PARPORT must be included and enabled
if you want to use chains of devices on the same parallel port.
2.2 Loading and configuring PARIDE as modules
It is much faster and simpler to get to understand the PARIDE drivers
if you use them as loadable kernel modules.
Note 1: using these drivers with the "kerneld" automatic module loading
system is not recommended for beginners, and is not documented here.
Note 2: if you build PARPORT support as a loadable module, PARIDE must
also be built as loadable modules, and PARPORT must be loaded before the
PARIDE modules.
To use PARIDE, you must begin by
insmod paride
this loads a base module which provides a registry for the protocols,
among other tasks.
Then, load as many of the protocol modules as you think you might need.
As you load each module, it will register the protocols that it supports,
and print a log message to your kernel log file and your console. For
example:
# insmod epat
paride: epat registered as protocol 0
# insmod kbic
paride: k951 registered as protocol 1
paride: k971 registered as protocol 2
Finally, you can load high-level drivers for each kind of device that
you have connected. By default, each driver will autoprobe for a single
device, but you can support up to four similar devices by giving their
individual co-ordinates when you load the driver.
For example, if you had two no-name CD-ROM drives both using the
KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc
you could give the following command:
# insmod pcd drive0=0x378,1 drive1=0x3bc,1
For most adapters, giving a port address and protocol number is sufficient,
but check the source files in linux/drivers/block/paride for more
information. (Hopefully someone will write some man pages one day !).
As another example, here's what happens when PARPORT is installed, and
a SyQuest EZ-135 is attached to port 0x378:
# insmod paride
paride: version 1.0 installed
# insmod epat
paride: epat registered as protocol 0
# insmod pd
pd: pd version 1.0, major 45, cluster 64, nice 0
pda: Sharing parport1 at 0x378
pda: epat 1.0, Shuttle EPAT chip c3 at 0x378, mode 5 (EPP-32), delay 1
pda: SyQuest EZ135A, 262144 blocks [128M], (512/16/32), removable media
pda: pda1
Note that the last line is the output from the generic partition table
scanner - in this case it reports that it has found a disk with one partition.
2.3 Using a PARIDE device
Once the drivers have been loaded, you can access PARIDE devices in the
same way as their traditional counterparts. You will probably need to
create the device "special files". Here is a simple script that you can
cut to a file and execute:
#!/bin/bash
#
# mkd -- a script to create the device special files for the PARIDE subsystem
#
function mkdev {
mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1
}
#
function pd {
D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) )
mkdev pd$D b 45 $[ $1 * 16 ]
for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
do mkdev pd$D$P b 45 $[ $1 * 16 + $P ]
done
}
#
cd /dev
#
for u in 0 1 2 3 ; do pd $u ; done
for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done
for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done
for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done
for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done
for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done
#
# end of mkd
With the device files and drivers in place, you can access PARIDE devices
like any other Linux device. For example, to mount a CD-ROM in pcd0, use:
mount /dev/pcd0 /cdrom
If you have a fresh Avatar Shark cartridge, and the drive is pda, you
might do something like:
fdisk /dev/pda -- make a new partition table with
partition 1 of type 83
mke2fs /dev/pda1 -- to build the file system
mkdir /shark -- make a place to mount the disk
mount /dev/pda1 /shark
Devices like the Imation superdisk work in the same way, except that
they do not have a partition table. For example to make a 120MB
floppy that you could share with a DOS system:
mkdosfs /dev/pf0
mount /dev/pf0 /mnt
2.4 The pf driver
The pf driver is intended for use with parallel port ATAPI disk
devices. The most common devices in this category are PD drives
and LS-120 drives. Traditionally, media for these devices are not
partitioned. Consequently, the pf driver does not support partitioned
media. This may be changed in a future version of the driver.
2.5 Using the pt driver
The pt driver for parallel port ATAPI tape drives is a minimal driver.
It does not yet support many of the standard tape ioctl operations.
For best performance, a block size of 32KB should be used. You will
probably want to set the parallel port delay to 0, if you can.
2.6 Using the pg driver
The pg driver can be used in conjunction with the cdrecord program
to create CD-ROMs. Please get cdrecord version 1.6.1 or later
from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ . To record CD-R media
your parallel port should ideally be set to EPP mode, and the "port delay"
should be set to 0. With those settings it is possible to record at 2x
speed without any buffer underruns. If you cannot get the driver to work
in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only.
3. Troubleshooting
3.1 Use EPP mode if you can
The most common problems that people report with the PARIDE drivers
concern the parallel port CMOS settings. At this time, none of the
PARIDE protocol modules support ECP mode, or any ECP combination modes.
If you are able to do so, please set your parallel port into EPP mode
using your CMOS setup procedure.
3.2 Check the port delay
Some parallel ports cannot reliably transfer data at full speed. To
offset the errors, the PARIDE protocol modules introduce a "port
delay" between each access to the i/o ports. Each protocol sets
a default value for this delay. In most cases, the user can override
the default and set it to 0 - resulting in somewhat higher transfer
rates. In some rare cases (especially with older 486 systems) the
default delays are not long enough. if you experience corrupt data
transfers, or unexpected failures, you may wish to increase the
port delay. The delay can be programmed using the "driveN" parameters
to each of the high-level drivers. Please see the notes above, or
read the comments at the beginning of the driver source files in
linux/drivers/block/paride.
3.3 Some drives need a printer reset
There appear to be a number of "noname" external drives on the market
that do not always power up correctly. We have noticed this with some
drives based on OnSpec and older Freecom adapters. In these rare cases,
the adapter can often be reinitialised by issuing a "printer reset" on
the parallel port. As the reset operation is potentially disruptive in
multiple device environments, the PARIDE drivers will not do it
automatically. You can however, force a printer reset by doing:
insmod lp reset=1
rmmod lp
If you have one of these marginal cases, you should probably build
your paride drivers as modules, and arrange to do the printer reset
before loading the PARIDE drivers.
3.4 Use the verbose option and dmesg if you need help
While a lot of testing has gone into these drivers to make them work
as smoothly as possible, problems will arise. If you do have problems,
please check all the obvious things first: does the drive work in
DOS with the manufacturer's drivers ? If that doesn't yield any useful
clues, then please make sure that only one drive is hooked to your system,
and that either (a) PARPORT is enabled or (b) no other device driver
is using your parallel port (check in /proc/ioports). Then, load the
appropriate drivers (you can load several protocol modules if you want)
as in:
# insmod paride
# insmod epat
# insmod bpck
# insmod kbic
...
# insmod pd verbose=1
(using the correct driver for the type of device you have, of course).
The verbose=1 parameter will cause the drivers to log a trace of their
activity as they attempt to locate your drive.
Use 'dmesg' to capture a log of all the PARIDE messages (any messages
beginning with paride:, a protocol module's name or a driver's name) and
include that with your bug report. You can submit a bug report in one
of two ways. Either send it directly to the author of the PARIDE suite,
by e-mail to grant@torque.net, or join the linux-parport mailing list
and post your report there.
3.5 For more information or help
You can join the linux-parport mailing list by sending a mail message
to
linux-parport-request@torque.net
with the single word
subscribe
in the body of the mail message (not in the subject line). Please be
sure that your mail program is correctly set up when you do this, as
the list manager is a robot that will subscribe you using the reply
address in your mail headers. REMOVE any anti-spam gimmicks you may
have in your mail headers, when sending mail to the list server.
You might also find some useful information on the linux-parport
web pages (although they are not always up to date) at
http://web.archive.org/web/*/http://www.torque.net/parport/

165
kernel/Documentation/blockdev/ramdisk.txt Normal file
View File

@@ -0,0 +1,165 @@
Using the RAM disk block device with Linux
------------------------------------------
Contents:
1) Overview
2) Kernel Command Line Parameters
3) Using "rdev -r"
4) An Example of Creating a Compressed RAM Disk
1) Overview
-----------
The RAM disk driver is a way to use main system memory as a block device. It
is required for initrd, an initial filesystem used if you need to load modules
in order to access the root filesystem (see Documentation/initrd.txt). It can
also be used for a temporary filesystem for crypto work, since the contents
are erased on reboot.
The RAM disk dynamically grows as more space is required. It does this by using
RAM from the buffer cache. The driver marks the buffers it is using as dirty
so that the VM subsystem does not try to reclaim them later.
The RAM disk supports up to 16 RAM disks by default, and can be reconfigured
to support an unlimited number of RAM disks (at your own risk). Just change
the configuration symbol BLK_DEV_RAM_COUNT in the Block drivers config menu
and (re)build the kernel.
To use RAM disk support with your system, run './MAKEDEV ram' from the /dev
directory. RAM disks are all major number 1, and start with minor number 0
for /dev/ram0, etc. If used, modern kernels use /dev/ram0 for an initrd.
The new RAM disk also has the ability to load compressed RAM disk images,
allowing one to squeeze more programs onto an average installation or
rescue floppy disk.
2) Kernel Command Line Parameters
---------------------------------
ramdisk_size=N
==============
This parameter tells the RAM disk driver to set up RAM disks of N k size. The
default is 4096 (4 MB) (8192 (8 MB) on S390).
ramdisk_blocksize=N
===================
This parameter tells the RAM disk driver how many bytes to use per block. The
default is 1024 (BLOCK_SIZE).
3) Using "rdev -r"
------------------
The usage of the word (two bytes) that "rdev -r" sets in the kernel image is
as follows. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up
to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit
14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a
prompt/wait sequence is to be given before trying to read the RAM disk. Since
the RAM disk dynamically grows as data is being written into it, a size field
is not required. Bits 11 to 13 are not currently used and may as well be zero.
These numbers are no magical secrets, as seen below:
./arch/x86/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF
./arch/x86/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000
./arch/x86/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000
Consider a typical two floppy disk setup, where you will have the
kernel on disk one, and have already put a RAM disk image onto disk #2.
Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk
starts at an offset of 0 kB from the beginning of the floppy.
The command line equivalent is: "ramdisk_start=0"
You want bit 14 as one, indicating that a RAM disk is to be loaded.
The command line equivalent is: "load_ramdisk=1"
You want bit 15 as one, indicating that you want a prompt/keypress
sequence so that you have a chance to switch floppy disks.
The command line equivalent is: "prompt_ramdisk=1"
Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word.
So to create disk one of the set, you would do:
/usr/src/linux# cat arch/x86/boot/zImage > /dev/fd0
/usr/src/linux# rdev /dev/fd0 /dev/fd0
/usr/src/linux# rdev -r /dev/fd0 49152
If you make a boot disk that has LILO, then for the above, you would use:
append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1"
Since the default start = 0 and the default prompt = 1, you could use:
append = "load_ramdisk=1"
4) An Example of Creating a Compressed RAM Disk
----------------------------------------------
To create a RAM disk image, you will need a spare block device to
construct it on. This can be the RAM disk device itself, or an
unused disk partition (such as an unmounted swap partition). For this
example, we will use the RAM disk device, "/dev/ram0".
Note: This technique should not be done on a machine with less than 8 MB
of RAM. If using a spare disk partition instead of /dev/ram0, then this
restriction does not apply.
a) Decide on the RAM disk size that you want. Say 2 MB for this example.
Create it by writing to the RAM disk device. (This step is not currently
required, but may be in the future.) It is wise to zero out the
area (esp. for disks) so that maximal compression is achieved for
the unused blocks of the image that you are about to create.
dd if=/dev/zero of=/dev/ram0 bs=1k count=2048
b) Make a filesystem on it. Say ext2fs for this example.
mke2fs -vm0 /dev/ram0 2048
c) Mount it, copy the files you want to it (eg: /etc/* /dev/* ...)
and unmount it again.
d) Compress the contents of the RAM disk. The level of compression
will be approximately 50% of the space used by the files. Unused
space on the RAM disk will compress to almost nothing.
dd if=/dev/ram0 bs=1k count=2048 | gzip -v9 > /tmp/ram_image.gz
e) Put the kernel onto the floppy
dd if=zImage of=/dev/fd0 bs=1k
f) Put the RAM disk image onto the floppy, after the kernel. Use an offset
that is slightly larger than the kernel, so that you can put another
(possibly larger) kernel onto the same floppy later without overlapping
the RAM disk image. An offset of 400 kB for kernels about 350 kB in
size would be reasonable. Make sure offset+size of ram_image.gz is
not larger than the total space on your floppy (usually 1440 kB).
dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400
g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc.
For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would
have 2^15 + 2^14 + 400 = 49552.
rdev /dev/fd0 /dev/fd0
rdev -r /dev/fd0 49552
That is it. You now have your boot/root compressed RAM disk floppy. Some
users may wish to combine steps (d) and (f) by using a pipe.
--------------------------------------------------------------------------
Paul Gortmaker 12/95
Changelog:
----------
10-22-04 : Updated to reflect changes in command line options, remove
obsolete references, general cleanup.
James Nelson (james4765@gmail.com)
12-95 : Original Document