M7350/kernel/drivers/power/qci_battery.h

122 lines
3.8 KiB
C
Raw Normal View History

2024-09-09 08:52:07 +00:00
/* Header file for Quanta I2C Battery Driver
*
* Copyright (C) 2009 Quanta Computer Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
/*
*
* The Driver with I/O communications via the I2C Interface for ON2 of AP BU.
* And it is only working on the nuvoTon WPCE775x Embedded Controller.
*
*/
#ifndef __QCI_BATTERY_H__
#define __QCI_BATTERY_H__
#define BAT_I2C_ADDRESS 0x1A
#define BATTERY_ID_NAME "qci-i2cbat"
#define EC_FLAG_ADAPTER_IN 0x01
#define EC_FLAG_POWER_ON 0x02
#define EC_FLAG_ENTER_S3 0x04
#define EC_FLAG_ENTER_S4 0x08
#define EC_FLAG_IN_STANDBY 0x10
#define EC_FLAG_SYSTEM_ON 0x20
#define EC_FLAG_WAIT_HWPG 0x40
#define EC_FLAG_S5_POWER_ON 0x80
#define MAIN_BATTERY_STATUS_BAT_DISCHRG 0x01
#define MAIN_BATTERY_STATUS_BAT_CHARGING 0x02
#define MAIN_BATTERY_STATUS_BAT_ABNORMAL 0x04
#define MAIN_BATTERY_STATUS_BAT_IN 0x08
#define MAIN_BATTERY_STATUS_BAT_FULL 0x10
#define MAIN_BATTERY_STATUS_BAT_LOW 0x20
#define MAIN_BATTERY_STATUS_BAT_SMB_VALID 0x80
#define CHG_STATUS_BAT_CHARGE 0x01
#define CHG_STATUS_BAT_PRECHG 0x02
#define CHG_STATUS_BAT_OVERTEMP 0x04
#define CHG_STATUS_BAT_TYPE 0x08
#define CHG_STATUS_BAT_GWROK 0x10
#define CHG_STATUS_BAT_INCHARGE 0x20
#define CHG_STATUS_BAT_WAKECHRG 0x40
#define CHG_STATUS_BAT_CHGTIMEOUT 0x80
#define EC_ADAPTER_PRESENT 0x1
#define EC_BAT_PRESENT 0x1
#define EC_ADAPTER_NOT_PRESENT 0x0
#define EC_BAT_NOT_PRESENT 0x0
#define ECRAM_POWER_SOURCE 0x40
#define ECRAM_CHARGER_ALARM 0x42
#define ECRAM_BATTERY_STATUS 0x82
#define ECRAM_BATTERY_CURRENT_LSB 0x83
#define ECRAM_BATTERY_CURRENT_MSB 0x84
#define ECRAM_BATTERY_VOLTAGE_LSB 0x87
#define ECRAM_BATTERY_VOLTAGE_MSB 0x88
#define ECRAM_BATTERY_CAPACITY 0x89
#define ECRAM_BATTERY_TEMP_LSB 0x8C
#define ECRAM_BATTERY_TEMP_MSB 0x8D
#define ECRAM_BATTERY_EVENTS 0x99
#define EC_EVENT_BATTERY 0x01
#define EC_EVENT_CHARGER 0x02
#define EC_EVENT_AC 0x10
#define EC_EVENT_TIMER 0x40
/* smbus access */
#define SMBUS_READ_BYTE_PRTCL 0x07
#define SMBUS_READ_WORD_PRTCL 0x09
#define SMBUS_READ_BLOCK_PRTCL 0x0B
/* smbus status code */
#define SMBUS_OK 0x00
#define SMBUS_DONE 0x80
#define SMBUS_ALARM 0x40
#define SMBUS_UNKNOW_FAILURE 0x07
#define SMBUS_DEVICE_NOACK 0x10
#define SMBUS_DEVICE_ERROR 0x11
#define SMBUS_UNKNOW_ERROR 0x13
#define SMBUS_TIME_OUT 0x18
#define SMBUS_BUSY 0x1A
/* ec ram mapping */
#define ECRAM_SMB_PRTCL 0
#define ECRAM_SMB_STS 1
#define ECRAM_SMB_ADDR 2
#define ECRAM_SMB_CMD 3
#define ECRAM_SMB_DATA_START 4
#define ECRAM_SMB_DATA0 4
#define ECRAM_SMB_DATA1 5
#define ECRAM_SMB_BCNT 36
#define ECRAM_SMB_ALARM_ADDR 37
#define ECRAM_SMB_ALARM_DATA0 38
#define ECRAM_SMB_ALARM_DATA1 39
/* smart battery commands */
#define BATTERY_SLAVE_ADDRESS 0x16
#define BATTERY_FULL_CAPACITY 0x10
#define BATTERY_AVERAGE_TIME_TO_EMPTY 0x12
#define BATTERY_AVERAGE_TIME_TO_FULL 0x13
#define BATTERY_CYCLE_COUNT 0x17
#define BATTERY_DESIGN_CAPACITY 0x18
#define BATTERY_DESIGN_VOLTAGE 0x19
#define BATTERY_SERIAL_NUMBER 0x1C
#define BATTERY_MANUFACTURE_NAME 0x20
#define BATTERY_DEVICE_NAME 0x21
/* alarm bit */
#define ALARM_REMAIN_CAPACITY 0x02
#define ALARM_OVER_TEMP 0x10
#define ALARM_OVER_CHARGE 0x80
#endif