M7350/kernel/drivers/power/bq27520_fuelgauger.c

961 lines
24 KiB
C
Raw Normal View History

2024-09-09 08:52:07 +00:00
/* Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it>
* Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it>
* Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc.
*
* Copyright (c) 2011, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/param.h>
#include <linux/jiffies.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/idr.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
#include <linux/time.h>
#include <linux/i2c/bq27520.h>
#include <linux/mfd/pmic8058.h>
#include <linux/regulator/pmic8058-regulator.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/machine.h>
#include <linux/err.h>
#include <linux/msm-charger.h>
#define DRIVER_VERSION "1.1.0"
/* Bq27520 standard data commands */
#define BQ27520_REG_CNTL 0x00
#define BQ27520_REG_AR 0x02
#define BQ27520_REG_ARTTE 0x04
#define BQ27520_REG_TEMP 0x06
#define BQ27520_REG_VOLT 0x08
#define BQ27520_REG_FLAGS 0x0A
#define BQ27520_REG_NAC 0x0C
#define BQ27520_REG_FAC 0x0e
#define BQ27520_REG_RM 0x10
#define BQ27520_REG_FCC 0x12
#define BQ27520_REG_AI 0x14
#define BQ27520_REG_TTE 0x16
#define BQ27520_REG_TTF 0x18
#define BQ27520_REG_SI 0x1a
#define BQ27520_REG_STTE 0x1c
#define BQ27520_REG_MLI 0x1e
#define BQ27520_REG_MLTTE 0x20
#define BQ27520_REG_AE 0x22
#define BQ27520_REG_AP 0x24
#define BQ27520_REG_TTECP 0x26
#define BQ27520_REG_SOH 0x28
#define BQ27520_REG_SOC 0x2c
#define BQ27520_REG_NIC 0x2e
#define BQ27520_REG_ICR 0x30
#define BQ27520_REG_LOGIDX 0x32
#define BQ27520_REG_LOGBUF 0x34
#define BQ27520_FLAG_DSC BIT(0)
#define BQ27520_FLAG_FC BIT(9)
#define BQ27520_FLAG_BAT_DET BIT(3)
#define BQ27520_CS_DLOGEN BIT(15)
#define BQ27520_CS_SS BIT(13)
/* Control subcommands */
#define BQ27520_SUBCMD_CTNL_STATUS 0x0000
#define BQ27520_SUBCMD_DEVCIE_TYPE 0x0001
#define BQ27520_SUBCMD_FW_VER 0x0002
#define BQ27520_SUBCMD_HW_VER 0x0003
#define BQ27520_SUBCMD_DF_CSUM 0x0004
#define BQ27520_SUBCMD_PREV_MACW 0x0007
#define BQ27520_SUBCMD_CHEM_ID 0x0008
#define BQ27520_SUBCMD_BD_OFFSET 0x0009
#define BQ27520_SUBCMD_INT_OFFSET 0x000a
#define BQ27520_SUBCMD_CC_VER 0x000b
#define BQ27520_SUBCMD_OCV 0x000c
#define BQ27520_SUBCMD_BAT_INS 0x000d
#define BQ27520_SUBCMD_BAT_REM 0x000e
#define BQ27520_SUBCMD_SET_HIB 0x0011
#define BQ27520_SUBCMD_CLR_HIB 0x0012
#define BQ27520_SUBCMD_SET_SLP 0x0013
#define BQ27520_SUBCMD_CLR_SLP 0x0014
#define BQ27520_SUBCMD_FCT_RES 0x0015
#define BQ27520_SUBCMD_ENABLE_DLOG 0x0018
#define BQ27520_SUBCMD_DISABLE_DLOG 0x0019
#define BQ27520_SUBCMD_SEALED 0x0020
#define BQ27520_SUBCMD_ENABLE_IT 0x0021
#define BQ27520_SUBCMD_DISABLE_IT 0x0023
#define BQ27520_SUBCMD_CAL_MODE 0x0040
#define BQ27520_SUBCMD_RESET 0x0041
#define ZERO_DEGREE_CELSIUS_IN_TENTH_KELVIN (-2731)
#define BQ27520_INIT_DELAY ((HZ)*1)
#define BQ27520_POLLING_STATUS ((HZ)*3)
#define BQ27520_COULOMB_POLL ((HZ)*30)
/* If the system has several batteries we need a different name for each
* of them...
*/
static DEFINE_IDR(battery_id);
static DEFINE_MUTEX(battery_mutex);
struct bq27520_device_info;
struct bq27520_access_methods {
int (*read)(u8 reg, int *rt_value, int b_single,
struct bq27520_device_info *di);
};
struct bq27520_device_info {
struct device *dev;
int id;
struct bq27520_access_methods *bus;
struct i2c_client *client;
const struct bq27520_platform_data *pdata;
struct work_struct counter;
/* 300ms delay is needed after bq27520 is powered up
* and before any successful I2C transaction
*/
struct delayed_work hw_config;
uint32_t irq;
};
enum {
GET_BATTERY_STATUS,
GET_BATTERY_TEMPERATURE,
GET_BATTERY_VOLTAGE,
GET_BATTERY_CAPACITY,
NUM_OF_STATUS,
};
struct bq27520_status {
/* Informations owned and maintained by Bq27520 driver, updated
* by poller or SOC_INT interrupt, decoupling from I/Oing
* hardware directly
*/
int status[NUM_OF_STATUS];
spinlock_t lock;
struct delayed_work poller;
};
static struct bq27520_status current_battery_status;
static struct bq27520_device_info *bq27520_di;
static int coulomb_counter;
static spinlock_t lock; /* protect access to coulomb_counter */
static struct timer_list timer; /* charge counter timer every 30 secs */
static int bq27520_i2c_txsubcmd(u8 reg, unsigned short subcmd,
struct bq27520_device_info *di);
static int bq27520_read(u8 reg, int *rt_value, int b_single,
struct bq27520_device_info *di)
{
return di->bus->read(reg, rt_value, b_single, di);
}
/*
* Return the battery temperature in tenths of degree Celsius
* Or < 0 if something fails.
*/
static int bq27520_battery_temperature(struct bq27520_device_info *di)
{
int ret, temp = 0;
ret = bq27520_read(BQ27520_REG_TEMP, &temp, 0, di);
if (ret) {
dev_err(di->dev, "error %d reading temperature\n", ret);
return ret;
}
return temp + ZERO_DEGREE_CELSIUS_IN_TENTH_KELVIN;
}
/*
* Return the battery Voltage in milivolts
* Or < 0 if something fails.
*/
static int bq27520_battery_voltage(struct bq27520_device_info *di)
{
int ret, volt = 0;
ret = bq27520_read(BQ27520_REG_VOLT, &volt, 0, di);
if (ret) {
dev_err(di->dev, "error %d reading voltage\n", ret);
return ret;
}
return volt;
}
/*
* Return the battery Relative State-of-Charge
* Or < 0 if something fails.
*/
static int bq27520_battery_rsoc(struct bq27520_device_info *di)
{
int ret, rsoc = 0;
ret = bq27520_read(BQ27520_REG_SOC, &rsoc, 0, di);
if (ret) {
dev_err(di->dev,
"error %d reading relative State-of-Charge\n", ret);
return ret;
}
return rsoc;
}
static void bq27520_cntl_cmd(struct bq27520_device_info *di,
int subcmd)
{
bq27520_i2c_txsubcmd(BQ27520_REG_CNTL, subcmd, di);
}
/*
* i2c specific code
*/
static int bq27520_i2c_txsubcmd(u8 reg, unsigned short subcmd,
struct bq27520_device_info *di)
{
struct i2c_msg msg;
unsigned char data[3];
if (!di->client)
return -ENODEV;
memset(data, 0, sizeof(data));
data[0] = reg;
data[1] = subcmd & 0x00FF;
data[2] = (subcmd & 0xFF00) >> 8;
msg.addr = di->client->addr;
msg.flags = 0;
msg.len = 3;
msg.buf = data;
if (i2c_transfer(di->client->adapter, &msg, 1) < 0)
return -EIO;
return 0;
}
static int bq27520_chip_config(struct bq27520_device_info *di)
{
int flags = 0, ret = 0;
bq27520_cntl_cmd(di, BQ27520_SUBCMD_CTNL_STATUS);
udelay(66);
ret = bq27520_read(BQ27520_REG_CNTL, &flags, 0, di);
if (ret < 0) {
dev_err(di->dev, "error %d reading register %02x\n",
ret, BQ27520_REG_CNTL);
return ret;
}
udelay(66);
bq27520_cntl_cmd(di, BQ27520_SUBCMD_ENABLE_IT);
udelay(66);
if (di->pdata->enable_dlog && !(flags & BQ27520_CS_DLOGEN)) {
bq27520_cntl_cmd(di, BQ27520_SUBCMD_ENABLE_DLOG);
udelay(66);
}
return 0;
}
static void bq27520_every_30secs(unsigned long data)
{
struct bq27520_device_info *di = (struct bq27520_device_info *)data;
schedule_work(&di->counter);
mod_timer(&timer, jiffies + BQ27520_COULOMB_POLL);
}
static void bq27520_coulomb_counter_work(struct work_struct *work)
{
int value = 0, temp = 0, index = 0, ret = 0, count = 0;
struct bq27520_device_info *di;
unsigned long flags;
di = container_of(work, struct bq27520_device_info, counter);
/* retrieve 30 values from FIFO of coulomb data logging buffer
* and average over time
*/
do {
ret = bq27520_read(BQ27520_REG_LOGBUF, &temp, 0, di);
if (ret < 0)
break;
if (temp != 0x7FFF) {
++count;
value += temp;
}
udelay(66);
ret = bq27520_read(BQ27520_REG_LOGIDX, &index, 0, di);
if (ret < 0)
break;
udelay(66);
} while (index != 0 || temp != 0x7FFF);
if (ret < 0) {
dev_err(di->dev, "Error %d reading datalog register\n", ret);
return;
}
if (count) {
spin_lock_irqsave(&lock, flags);
coulomb_counter = value/count;
spin_unlock_irqrestore(&lock, flags);
}
}
static int bq27520_is_battery_present(void)
{
return 1;
}
static int bq27520_is_battery_temp_within_range(void)
{
return 1;
}
static int bq27520_is_battery_id_valid(void)
{
return 1;
}
static int bq27520_status_getter(int function)
{
int status = 0;
unsigned long flags;
spin_lock_irqsave(&current_battery_status.lock, flags);
status = current_battery_status.status[function];
spin_unlock_irqrestore(&current_battery_status.lock, flags);
return status;
}
static int bq27520_get_battery_mvolts(void)
{
return bq27520_status_getter(GET_BATTERY_VOLTAGE);
}
static int bq27520_get_battery_temperature(void)
{
return bq27520_status_getter(GET_BATTERY_TEMPERATURE);
}
static int bq27520_get_battery_status(void)
{
return bq27520_status_getter(GET_BATTERY_STATUS);
}
static int bq27520_get_remaining_capacity(void)
{
return bq27520_status_getter(GET_BATTERY_CAPACITY);
}
static struct msm_battery_gauge bq27520_batt_gauge = {
.get_battery_mvolts = bq27520_get_battery_mvolts,
.get_battery_temperature = bq27520_get_battery_temperature,
.is_battery_present = bq27520_is_battery_present,
.is_battery_temp_within_range = bq27520_is_battery_temp_within_range,
.is_battery_id_valid = bq27520_is_battery_id_valid,
.get_battery_status = bq27520_get_battery_status,
.get_batt_remaining_capacity = bq27520_get_remaining_capacity,
};
static void update_current_battery_status(int data)
{
int status[4], ret = 0;
unsigned long flag;
memset(status, 0, sizeof status);
ret = bq27520_battery_rsoc(bq27520_di);
status[GET_BATTERY_CAPACITY] = (ret < 0) ? 0 : ret;
status[GET_BATTERY_VOLTAGE] = bq27520_battery_voltage(bq27520_di);
status[GET_BATTERY_TEMPERATURE] =
bq27520_battery_temperature(bq27520_di);
spin_lock_irqsave(&current_battery_status.lock, flag);
current_battery_status.status[GET_BATTERY_STATUS] = data;
current_battery_status.status[GET_BATTERY_VOLTAGE] =
status[GET_BATTERY_VOLTAGE];
current_battery_status.status[GET_BATTERY_TEMPERATURE] =
status[GET_BATTERY_TEMPERATURE];
current_battery_status.status[GET_BATTERY_CAPACITY] =
status[GET_BATTERY_CAPACITY];
spin_unlock_irqrestore(&current_battery_status.lock, flag);
}
/* only if battery charging satus changes then notify msm_charger. otherwise
* only refresh current_batter_status
*/
static int if_notify_msm_charger(int *data)
{
int ret = 0, flags = 0, status = 0;
unsigned long flag;
ret = bq27520_read(BQ27520_REG_FLAGS, &flags, 0, bq27520_di);
if (ret < 0) {
dev_err(bq27520_di->dev, "error %d reading register %02x\n",
ret, BQ27520_REG_FLAGS);
status = POWER_SUPPLY_STATUS_UNKNOWN;
} else {
if (flags & BQ27520_FLAG_FC)
status = POWER_SUPPLY_STATUS_FULL;
else if (flags & BQ27520_FLAG_DSC)
status = POWER_SUPPLY_STATUS_DISCHARGING;
else
status = POWER_SUPPLY_STATUS_CHARGING;
}
*data = status;
spin_lock_irqsave(&current_battery_status.lock, flag);
ret = (status != current_battery_status.status[GET_BATTERY_STATUS]);
spin_unlock_irqrestore(&current_battery_status.lock, flag);
return ret;
}
static void battery_status_poller(struct work_struct *work)
{
int status = 0, temp = 0;
temp = if_notify_msm_charger(&status);
update_current_battery_status(status);
if (temp)
msm_charger_notify_event(NULL, CHG_BATT_STATUS_CHANGE);
schedule_delayed_work(&current_battery_status.poller,
BQ27520_POLLING_STATUS);
}
static void bq27520_hw_config(struct work_struct *work)
{
int ret = 0, flags = 0, type = 0, fw_ver = 0, status = 0;
struct bq27520_device_info *di;
di = container_of(work, struct bq27520_device_info, hw_config.work);
pr_debug(KERN_INFO "Enter bq27520_hw_config\n");
ret = bq27520_chip_config(di);
if (ret) {
dev_err(di->dev, "Failed to config Bq27520 ret = %d\n", ret);
return;
}
/* bq27520 is ready for access, update current_battery_status by reading
* from hardware
*/
if_notify_msm_charger(&status);
update_current_battery_status(status);
msm_battery_gauge_register(&bq27520_batt_gauge);
msm_charger_notify_event(NULL, CHG_BATT_STATUS_CHANGE);
enable_irq(di->irq);
/* poll battery status every 3 seconds, if charging status changes,
* notify msm_charger
*/
schedule_delayed_work(&current_battery_status.poller,
BQ27520_POLLING_STATUS);
if (di->pdata->enable_dlog) {
schedule_work(&di->counter);
init_timer(&timer);
timer.function = &bq27520_every_30secs;
timer.data = (unsigned long)di;
timer.expires = jiffies + BQ27520_COULOMB_POLL;
add_timer(&timer);
}
bq27520_cntl_cmd(di, BQ27520_SUBCMD_CTNL_STATUS);
udelay(66);
bq27520_read(BQ27520_REG_CNTL, &flags, 0, di);
bq27520_cntl_cmd(di, BQ27520_SUBCMD_DEVCIE_TYPE);
udelay(66);
bq27520_read(BQ27520_REG_CNTL, &type, 0, di);
bq27520_cntl_cmd(di, BQ27520_SUBCMD_FW_VER);
udelay(66);
bq27520_read(BQ27520_REG_CNTL, &fw_ver, 0, di);
dev_info(di->dev, "DEVICE_TYPE is 0x%02X, FIRMWARE_VERSION\
is 0x%02X\n", type, fw_ver);
dev_info(di->dev, "Complete bq27520 configuration 0x%02X\n", flags);
}
static int bq27520_read_i2c(u8 reg, int *rt_value, int b_single,
struct bq27520_device_info *di)
{
struct i2c_client *client = di->client;
struct i2c_msg msg[1];
unsigned char data[2];
int err;
if (!client->adapter)
return -ENODEV;
msg->addr = client->addr;
msg->flags = 0;
msg->len = 1;
msg->buf = data;
data[0] = reg;
err = i2c_transfer(client->adapter, msg, 1);
if (err >= 0) {
if (!b_single)
msg->len = 2;
else
msg->len = 1;
msg->flags = I2C_M_RD;
err = i2c_transfer(client->adapter, msg, 1);
if (err >= 0) {
if (!b_single)
*rt_value = get_unaligned_le16(data);
else
*rt_value = data[0];
return 0;
}
}
return err;
}
#ifdef CONFIG_BQ27520_TEST_ENABLE
static int reg;
static int subcmd;
static ssize_t bq27520_read_stdcmd(struct device *dev,
struct device_attribute *attr, char *buf)
{
int ret;
int temp = 0;
struct platform_device *client;
struct bq27520_device_info *di;
client = to_platform_device(dev);
di = platform_get_drvdata(client);
if (reg <= BQ27520_REG_ICR && reg > 0x00) {
ret = bq27520_read(reg, &temp, 0, di);
if (ret)
ret = snprintf(buf, PAGE_SIZE, "Read Error!\n");
else
ret = snprintf(buf, PAGE_SIZE, "0x%02x\n", temp);
} else
ret = snprintf(buf, PAGE_SIZE, "Register Error!\n");
return ret;
}
static ssize_t bq27520_write_stdcmd(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
ssize_t ret = strnlen(buf, PAGE_SIZE);
int cmd;
sscanf(buf, "%x", &cmd);
reg = cmd;
dev_info(dev, "recv'd cmd is 0x%02X\n", reg);
return ret;
}
static ssize_t bq27520_read_subcmd(struct device *dev,
struct device_attribute *attr, char *buf)
{
int ret, temp = 0;
struct platform_device *client;
struct bq27520_device_info *di;
client = to_platform_device(dev);
di = platform_get_drvdata(client);
if (subcmd == BQ27520_SUBCMD_DEVCIE_TYPE ||
subcmd == BQ27520_SUBCMD_FW_VER ||
subcmd == BQ27520_SUBCMD_HW_VER ||
subcmd == BQ27520_SUBCMD_CHEM_ID) {
bq27520_cntl_cmd(di, subcmd);/* Retrieve Chip status */
udelay(66);
ret = bq27520_read(BQ27520_REG_CNTL, &temp, 0, di);
if (ret)
ret = snprintf(buf, PAGE_SIZE, "Read Error!\n");
else
ret = snprintf(buf, PAGE_SIZE, "0x%02x\n", temp);
} else
ret = snprintf(buf, PAGE_SIZE, "Register Error!\n");
return ret;
}
static ssize_t bq27520_write_subcmd(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
ssize_t ret = strnlen(buf, PAGE_SIZE);
int cmd;
sscanf(buf, "%x", &cmd);
subcmd = cmd;
return ret;
}
static DEVICE_ATTR(std_cmd, S_IRUGO|S_IWUGO, bq27520_read_stdcmd,
bq27520_write_stdcmd);
static DEVICE_ATTR(sub_cmd, S_IRUGO|S_IWUGO, bq27520_read_subcmd,
bq27520_write_subcmd);
static struct attribute *fs_attrs[] = {
&dev_attr_std_cmd.attr,
&dev_attr_sub_cmd.attr,
NULL,
};
static struct attribute_group fs_attr_group = {
.attrs = fs_attrs,
};
static struct platform_device this_device = {
.name = "bq27520-test",
.id = -1,
.dev.platform_data = NULL,
};
#endif
static irqreturn_t soc_irqhandler(int irq, void *dev_id)
{
int status = 0, temp = 0;
temp = if_notify_msm_charger(&status);
update_current_battery_status(status);
if (temp)
msm_charger_notify_event(NULL, CHG_BATT_STATUS_CHANGE);
return IRQ_HANDLED;
}
static struct regulator *vreg_bq27520;
static int bq27520_power(bool enable, struct bq27520_device_info *di)
{
int rc = 0, ret;
const struct bq27520_platform_data *platdata;
platdata = di->pdata;
if (enable) {
/* switch on Vreg_S3 */
rc = regulator_enable(vreg_bq27520);
if (rc < 0) {
dev_err(di->dev, "%s: vreg %s %s failed (%d)\n",
__func__, platdata->vreg_name, "enable", rc);
goto vreg_fail;
}
/* Battery gauge enable and switch on onchip 2.5V LDO */
rc = gpio_request(platdata->chip_en, "GAUGE_EN");
if (rc) {
dev_err(di->dev, "%s: fail to request gpio %d (%d)\n",
__func__, platdata->chip_en, rc);
goto vreg_fail;
}
gpio_direction_output(platdata->chip_en, 0);
gpio_set_value(platdata->chip_en, 1);
rc = gpio_request(platdata->soc_int, "GAUGE_SOC_INT");
if (rc) {
dev_err(di->dev, "%s: fail to request gpio %d (%d)\n",
__func__, platdata->soc_int, rc);
goto gpio_fail;
}
gpio_direction_input(platdata->soc_int);
di->irq = gpio_to_irq(platdata->soc_int);
rc = request_threaded_irq(di->irq, NULL, soc_irqhandler,
IRQF_TRIGGER_FALLING|IRQF_TRIGGER_RISING,
"BQ27520_IRQ", di);
if (rc) {
dev_err(di->dev, "%s: fail to request irq %d (%d)\n",
__func__, platdata->soc_int, rc);
goto irqreq_fail;
} else {
disable_irq_nosync(di->irq);
}
} else {
free_irq(di->irq, di);
gpio_free(platdata->soc_int);
/* switch off on-chip 2.5V LDO and disable Battery gauge */
gpio_set_value(platdata->chip_en, 0);
gpio_free(platdata->chip_en);
/* switch off Vreg_S3 */
rc = regulator_disable(vreg_bq27520);
if (rc < 0) {
dev_err(di->dev, "%s: vreg %s %s failed (%d)\n",
__func__, platdata->vreg_name, "disable", rc);
goto vreg_fail;
}
}
return rc;
irqreq_fail:
gpio_free(platdata->soc_int);
gpio_fail:
gpio_set_value(platdata->chip_en, 0);
gpio_free(platdata->chip_en);
vreg_fail:
ret = !enable ? regulator_enable(vreg_bq27520) :
regulator_disable(vreg_bq27520);
if (ret < 0) {
dev_err(di->dev, "%s: vreg %s %s failed (%d) in err path\n",
__func__, platdata->vreg_name,
!enable ? "enable" : "disable", ret);
}
return rc;
}
static int bq27520_dev_setup(bool enable, struct bq27520_device_info *di)
{
int rc;
const struct bq27520_platform_data *platdata;
platdata = di->pdata;
if (enable) {
/* enable and set voltage Vreg_S3 */
vreg_bq27520 = regulator_get(NULL,
platdata->vreg_name);
if (IS_ERR(vreg_bq27520)) {
dev_err(di->dev, "%s: regulator get of %s\
failed (%ld)\n", __func__, platdata->vreg_name,
PTR_ERR(vreg_bq27520));
rc = PTR_ERR(vreg_bq27520);
goto vreg_get_fail;
}
rc = regulator_set_voltage(vreg_bq27520,
platdata->vreg_value, platdata->vreg_value);
if (rc) {
dev_err(di->dev, "%s: regulator_set_voltage(%s) failed\
(%d)\n", __func__, platdata->vreg_name, rc);
goto vreg_get_fail;
}
} else {
regulator_put(vreg_bq27520);
}
return 0;
vreg_get_fail:
regulator_put(vreg_bq27520);
return rc;
}
static int bq27520_battery_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct bq27520_device_info *di;
struct bq27520_access_methods *bus;
const struct bq27520_platform_data *pdata;
int num, retval = 0;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -ENODEV;
pdata = client->dev.platform_data;
/* Get new ID for the new battery device */
retval = idr_pre_get(&battery_id, GFP_KERNEL);
if (retval == 0)
return -ENOMEM;
mutex_lock(&battery_mutex);
retval = idr_get_new(&battery_id, client, &num);
mutex_unlock(&battery_mutex);
if (retval < 0)
return retval;
di = kzalloc(sizeof(*di), GFP_KERNEL);
if (!di) {
dev_err(&client->dev, "failed to allocate device info data\n");
retval = -ENOMEM;
goto batt_failed_1;
}
di->id = num;
di->pdata = pdata;
bus = kzalloc(sizeof(*bus), GFP_KERNEL);
if (!bus) {
dev_err(&client->dev, "failed to allocate data\n");
retval = -ENOMEM;
goto batt_failed_2;
}
i2c_set_clientdata(client, di);
di->dev = &client->dev;
bus->read = &bq27520_read_i2c;
di->bus = bus;
di->client = client;
#ifdef CONFIG_BQ27520_TEST_ENABLE
platform_set_drvdata(&this_device, di);
retval = platform_device_register(&this_device);
if (!retval) {
retval = sysfs_create_group(&this_device.dev.kobj,
&fs_attr_group);
if (retval)
goto batt_failed_3;
} else
goto batt_failed_3;
#endif
retval = bq27520_dev_setup(true, di);
if (retval) {
dev_err(&client->dev, "failed to setup ret = %d\n", retval);
goto batt_failed_3;
}
retval = bq27520_power(true, di);
if (retval) {
dev_err(&client->dev, "failed to powerup ret = %d\n", retval);
goto batt_failed_3;
}
spin_lock_init(&lock);
bq27520_di = di;
if (pdata->enable_dlog)
INIT_WORK(&di->counter, bq27520_coulomb_counter_work);
INIT_DELAYED_WORK(&current_battery_status.poller,
battery_status_poller);
INIT_DELAYED_WORK(&di->hw_config, bq27520_hw_config);
schedule_delayed_work(&di->hw_config, BQ27520_INIT_DELAY);
return 0;
batt_failed_3:
kfree(bus);
batt_failed_2:
kfree(di);
batt_failed_1:
mutex_lock(&battery_mutex);
idr_remove(&battery_id, num);
mutex_unlock(&battery_mutex);
return retval;
}
static int bq27520_battery_remove(struct i2c_client *client)
{
struct bq27520_device_info *di = i2c_get_clientdata(client);
if (di->pdata->enable_dlog) {
del_timer_sync(&timer);
cancel_work_sync(&di->counter);
bq27520_cntl_cmd(di, BQ27520_SUBCMD_DISABLE_DLOG);
udelay(66);
}
bq27520_cntl_cmd(di, BQ27520_SUBCMD_DISABLE_IT);
cancel_delayed_work_sync(&di->hw_config);
cancel_delayed_work_sync(&current_battery_status.poller);
bq27520_dev_setup(false, di);
bq27520_power(false, di);
kfree(di->bus);
mutex_lock(&battery_mutex);
idr_remove(&battery_id, di->id);
mutex_unlock(&battery_mutex);
kfree(di);
return 0;
}
#ifdef CONFIG_PM
static int bq27520_suspend(struct device *dev)
{
struct bq27520_device_info *di = dev_get_drvdata(dev);
disable_irq_nosync(di->irq);
if (di->pdata->enable_dlog) {
del_timer_sync(&timer);
cancel_work_sync(&di->counter);
}
cancel_delayed_work_sync(&current_battery_status.poller);
return 0;
}
static int bq27520_resume(struct device *dev)
{
struct bq27520_device_info *di = dev_get_drvdata(dev);
enable_irq(di->irq);
if (di->pdata->enable_dlog)
add_timer(&timer);
schedule_delayed_work(&current_battery_status.poller,
BQ27520_POLLING_STATUS);
return 0;
}
static const struct dev_pm_ops bq27520_pm_ops = {
.suspend = bq27520_suspend,
.resume = bq27520_resume,
};
#endif
static const struct i2c_device_id bq27520_id[] = {
{ "bq27520", 1 },
{},
};
MODULE_DEVICE_TABLE(i2c, BQ27520_id);
static struct i2c_driver bq27520_battery_driver = {
.driver = {
.name = "bq27520-battery",
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &bq27520_pm_ops,
#endif
},
.probe = bq27520_battery_probe,
.remove = bq27520_battery_remove,
.id_table = bq27520_id,
};
static void init_battery_status(void)
{
spin_lock_init(&current_battery_status.lock);
current_battery_status.status[GET_BATTERY_STATUS] =
POWER_SUPPLY_STATUS_UNKNOWN;
}
static int __init bq27520_battery_init(void)
{
int ret;
/* initialize current_battery_status, and register with msm-charger */
init_battery_status();
ret = i2c_add_driver(&bq27520_battery_driver);
if (ret)
printk(KERN_ERR "Unable to register driver ret = %d\n", ret);
return ret;
}
module_init(bq27520_battery_init);
static void __exit bq27520_battery_exit(void)
{
i2c_del_driver(&bq27520_battery_driver);
msm_battery_gauge_unregister(&bq27520_batt_gauge);
}
module_exit(bq27520_battery_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Qualcomm Innovation Center, Inc.");
MODULE_DESCRIPTION("BQ27520 battery monitor driver");