1507 lines
44 KiB
C
1507 lines
44 KiB
C
|
/*
|
||
|
* Copyright (c) 2010-2011 Atheros Communications Inc.
|
||
|
*
|
||
|
* Permission to use, copy, modify, and/or distribute this software for any
|
||
|
* purpose with or without fee is hereby granted, provided that the above
|
||
|
* copyright notice and this permission notice appear in all copies.
|
||
|
*
|
||
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||
|
*/
|
||
|
|
||
|
#include <linux/export.h>
|
||
|
#include "hw.h"
|
||
|
#include "ar9003_phy.h"
|
||
|
|
||
|
static const int firstep_table[] =
|
||
|
/* level: 0 1 2 3 4 5 6 7 8 */
|
||
|
{ -4, -2, 0, 2, 4, 6, 8, 10, 12 }; /* lvl 0-8, default 2 */
|
||
|
|
||
|
static const int cycpwrThr1_table[] =
|
||
|
/* level: 0 1 2 3 4 5 6 7 8 */
|
||
|
{ -6, -4, -2, 0, 2, 4, 6, 8 }; /* lvl 0-7, default 3 */
|
||
|
|
||
|
/*
|
||
|
* register values to turn OFDM weak signal detection OFF
|
||
|
*/
|
||
|
static const int m1ThreshLow_off = 127;
|
||
|
static const int m2ThreshLow_off = 127;
|
||
|
static const int m1Thresh_off = 127;
|
||
|
static const int m2Thresh_off = 127;
|
||
|
static const int m2CountThr_off = 31;
|
||
|
static const int m2CountThrLow_off = 63;
|
||
|
static const int m1ThreshLowExt_off = 127;
|
||
|
static const int m2ThreshLowExt_off = 127;
|
||
|
static const int m1ThreshExt_off = 127;
|
||
|
static const int m2ThreshExt_off = 127;
|
||
|
|
||
|
/**
|
||
|
* ar9003_hw_set_channel - set channel on single-chip device
|
||
|
* @ah: atheros hardware structure
|
||
|
* @chan:
|
||
|
*
|
||
|
* This is the function to change channel on single-chip devices, that is
|
||
|
* for AR9300 family of chipsets.
|
||
|
*
|
||
|
* This function takes the channel value in MHz and sets
|
||
|
* hardware channel value. Assumes writes have been enabled to analog bus.
|
||
|
*
|
||
|
* Actual Expression,
|
||
|
*
|
||
|
* For 2GHz channel,
|
||
|
* Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17)
|
||
|
* (freq_ref = 40MHz)
|
||
|
*
|
||
|
* For 5GHz channel,
|
||
|
* Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10)
|
||
|
* (freq_ref = 40MHz/(24>>amodeRefSel))
|
||
|
*
|
||
|
* For 5GHz channels which are 5MHz spaced,
|
||
|
* Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17)
|
||
|
* (freq_ref = 40MHz)
|
||
|
*/
|
||
|
static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
|
||
|
{
|
||
|
u16 bMode, fracMode = 0, aModeRefSel = 0;
|
||
|
u32 freq, channelSel = 0, reg32 = 0;
|
||
|
struct chan_centers centers;
|
||
|
int loadSynthChannel;
|
||
|
|
||
|
ath9k_hw_get_channel_centers(ah, chan, ¢ers);
|
||
|
freq = centers.synth_center;
|
||
|
|
||
|
if (freq < 4800) { /* 2 GHz, fractional mode */
|
||
|
if (AR_SREV_9330(ah)) {
|
||
|
u32 chan_frac;
|
||
|
u32 div;
|
||
|
|
||
|
if (ah->is_clk_25mhz)
|
||
|
div = 75;
|
||
|
else
|
||
|
div = 120;
|
||
|
|
||
|
channelSel = (freq * 4) / div;
|
||
|
chan_frac = (((freq * 4) % div) * 0x20000) / div;
|
||
|
channelSel = (channelSel << 17) | chan_frac;
|
||
|
} else if (AR_SREV_9485(ah)) {
|
||
|
u32 chan_frac;
|
||
|
|
||
|
/*
|
||
|
* freq_ref = 40 / (refdiva >> amoderefsel); where refdiva=1 and amoderefsel=0
|
||
|
* ndiv = ((chan_mhz * 4) / 3) / freq_ref;
|
||
|
* chansel = int(ndiv), chanfrac = (ndiv - chansel) * 0x20000
|
||
|
*/
|
||
|
channelSel = (freq * 4) / 120;
|
||
|
chan_frac = (((freq * 4) % 120) * 0x20000) / 120;
|
||
|
channelSel = (channelSel << 17) | chan_frac;
|
||
|
} else if (AR_SREV_9340(ah)) {
|
||
|
if (ah->is_clk_25mhz) {
|
||
|
u32 chan_frac;
|
||
|
|
||
|
channelSel = (freq * 2) / 75;
|
||
|
chan_frac = (((freq * 2) % 75) * 0x20000) / 75;
|
||
|
channelSel = (channelSel << 17) | chan_frac;
|
||
|
} else
|
||
|
channelSel = CHANSEL_2G(freq) >> 1;
|
||
|
} else
|
||
|
channelSel = CHANSEL_2G(freq);
|
||
|
/* Set to 2G mode */
|
||
|
bMode = 1;
|
||
|
} else {
|
||
|
if (AR_SREV_9340(ah) && ah->is_clk_25mhz) {
|
||
|
u32 chan_frac;
|
||
|
|
||
|
channelSel = (freq * 2) / 75;
|
||
|
chan_frac = (((freq * 2) % 75) * 0x20000) / 75;
|
||
|
channelSel = (channelSel << 17) | chan_frac;
|
||
|
} else {
|
||
|
channelSel = CHANSEL_5G(freq);
|
||
|
/* Doubler is ON, so, divide channelSel by 2. */
|
||
|
channelSel >>= 1;
|
||
|
}
|
||
|
/* Set to 5G mode */
|
||
|
bMode = 0;
|
||
|
}
|
||
|
|
||
|
/* Enable fractional mode for all channels */
|
||
|
fracMode = 1;
|
||
|
aModeRefSel = 0;
|
||
|
loadSynthChannel = 0;
|
||
|
|
||
|
reg32 = (bMode << 29);
|
||
|
REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32);
|
||
|
|
||
|
/* Enable Long shift Select for Synthesizer */
|
||
|
REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_SYNTH4,
|
||
|
AR_PHY_SYNTH4_LONG_SHIFT_SELECT, 1);
|
||
|
|
||
|
/* Program Synth. setting */
|
||
|
reg32 = (channelSel << 2) | (fracMode << 30) |
|
||
|
(aModeRefSel << 28) | (loadSynthChannel << 31);
|
||
|
REG_WRITE(ah, AR_PHY_65NM_CH0_SYNTH7, reg32);
|
||
|
|
||
|
/* Toggle Load Synth channel bit */
|
||
|
loadSynthChannel = 1;
|
||
|
reg32 = (channelSel << 2) | (fracMode << 30) |
|
||
|
(aModeRefSel << 28) | (loadSynthChannel << 31);
|
||
|
REG_WRITE(ah, AR_PHY_65NM_CH0_SYNTH7, reg32);
|
||
|
|
||
|
ah->curchan = chan;
|
||
|
ah->curchan_rad_index = -1;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* ar9003_hw_spur_mitigate_mrc_cck - convert baseband spur frequency
|
||
|
* @ah: atheros hardware structure
|
||
|
* @chan:
|
||
|
*
|
||
|
* For single-chip solutions. Converts to baseband spur frequency given the
|
||
|
* input channel frequency and compute register settings below.
|
||
|
*
|
||
|
* Spur mitigation for MRC CCK
|
||
|
*/
|
||
|
static void ar9003_hw_spur_mitigate_mrc_cck(struct ath_hw *ah,
|
||
|
struct ath9k_channel *chan)
|
||
|
{
|
||
|
static const u32 spur_freq[4] = { 2420, 2440, 2464, 2480 };
|
||
|
int cur_bb_spur, negative = 0, cck_spur_freq;
|
||
|
int i;
|
||
|
int range, max_spur_cnts, synth_freq;
|
||
|
u8 *spur_fbin_ptr = NULL;
|
||
|
|
||
|
/*
|
||
|
* Need to verify range +/- 10 MHz in control channel, otherwise spur
|
||
|
* is out-of-band and can be ignored.
|
||
|
*/
|
||
|
|
||
|
if (AR_SREV_9485(ah) || AR_SREV_9340(ah) || AR_SREV_9330(ah)) {
|
||
|
spur_fbin_ptr = ar9003_get_spur_chan_ptr(ah,
|
||
|
IS_CHAN_2GHZ(chan));
|
||
|
if (spur_fbin_ptr[0] == 0) /* No spur */
|
||
|
return;
|
||
|
max_spur_cnts = 5;
|
||
|
if (IS_CHAN_HT40(chan)) {
|
||
|
range = 19;
|
||
|
if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
|
||
|
AR_PHY_GC_DYN2040_PRI_CH) == 0)
|
||
|
synth_freq = chan->channel + 10;
|
||
|
else
|
||
|
synth_freq = chan->channel - 10;
|
||
|
} else {
|
||
|
range = 10;
|
||
|
synth_freq = chan->channel;
|
||
|
}
|
||
|
} else {
|
||
|
range = AR_SREV_9462(ah) ? 5 : 10;
|
||
|
max_spur_cnts = 4;
|
||
|
synth_freq = chan->channel;
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < max_spur_cnts; i++) {
|
||
|
if (AR_SREV_9462(ah) && (i == 0 || i == 3))
|
||
|
continue;
|
||
|
negative = 0;
|
||
|
if (AR_SREV_9485(ah) || AR_SREV_9340(ah) || AR_SREV_9330(ah))
|
||
|
cur_bb_spur = FBIN2FREQ(spur_fbin_ptr[i],
|
||
|
IS_CHAN_2GHZ(chan)) - synth_freq;
|
||
|
else
|
||
|
cur_bb_spur = spur_freq[i] - synth_freq;
|
||
|
|
||
|
if (cur_bb_spur < 0) {
|
||
|
negative = 1;
|
||
|
cur_bb_spur = -cur_bb_spur;
|
||
|
}
|
||
|
if (cur_bb_spur < range) {
|
||
|
cck_spur_freq = (int)((cur_bb_spur << 19) / 11);
|
||
|
|
||
|
if (negative == 1)
|
||
|
cck_spur_freq = -cck_spur_freq;
|
||
|
|
||
|
cck_spur_freq = cck_spur_freq & 0xfffff;
|
||
|
|
||
|
REG_RMW_FIELD(ah, AR_PHY_AGC_CONTROL,
|
||
|
AR_PHY_AGC_CONTROL_YCOK_MAX, 0x7);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
|
||
|
AR_PHY_CCK_SPUR_MIT_SPUR_RSSI_THR, 0x7f);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
|
||
|
AR_PHY_CCK_SPUR_MIT_SPUR_FILTER_TYPE,
|
||
|
0x2);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
|
||
|
AR_PHY_CCK_SPUR_MIT_USE_CCK_SPUR_MIT,
|
||
|
0x1);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
|
||
|
AR_PHY_CCK_SPUR_MIT_CCK_SPUR_FREQ,
|
||
|
cck_spur_freq);
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
REG_RMW_FIELD(ah, AR_PHY_AGC_CONTROL,
|
||
|
AR_PHY_AGC_CONTROL_YCOK_MAX, 0x5);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
|
||
|
AR_PHY_CCK_SPUR_MIT_USE_CCK_SPUR_MIT, 0x0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
|
||
|
AR_PHY_CCK_SPUR_MIT_CCK_SPUR_FREQ, 0x0);
|
||
|
}
|
||
|
|
||
|
/* Clean all spur register fields */
|
||
|
static void ar9003_hw_spur_ofdm_clear(struct ath_hw *ah)
|
||
|
{
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
|
||
|
AR_PHY_TIMING4_ENABLE_SPUR_FILTER, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
|
||
|
AR_PHY_TIMING11_SPUR_FREQ_SD, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
|
||
|
AR_PHY_TIMING11_SPUR_DELTA_PHASE, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
|
||
|
AR_PHY_SFCORR_EXT_SPUR_SUBCHANNEL_SD, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
|
||
|
AR_PHY_TIMING11_USE_SPUR_FILTER_IN_AGC, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
|
||
|
AR_PHY_TIMING11_USE_SPUR_FILTER_IN_SELFCOR, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
|
||
|
AR_PHY_TIMING4_ENABLE_SPUR_RSSI, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
|
||
|
AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
|
||
|
AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 0);
|
||
|
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
|
||
|
AR_PHY_SPUR_REG_ENABLE_MASK_PPM, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
|
||
|
AR_PHY_TIMING4_ENABLE_PILOT_MASK, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
|
||
|
AR_PHY_TIMING4_ENABLE_CHAN_MASK, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
|
||
|
AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_IDX_A, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
|
||
|
AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
|
||
|
AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_IDX_A, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
|
||
|
AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_A, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
|
||
|
AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_A, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
|
||
|
AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A, 0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
|
||
|
AR_PHY_SPUR_REG_MASK_RATE_CNTL, 0);
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_spur_ofdm(struct ath_hw *ah,
|
||
|
int freq_offset,
|
||
|
int spur_freq_sd,
|
||
|
int spur_delta_phase,
|
||
|
int spur_subchannel_sd)
|
||
|
{
|
||
|
int mask_index = 0;
|
||
|
|
||
|
/* OFDM Spur mitigation */
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
|
||
|
AR_PHY_TIMING4_ENABLE_SPUR_FILTER, 0x1);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
|
||
|
AR_PHY_TIMING11_SPUR_FREQ_SD, spur_freq_sd);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
|
||
|
AR_PHY_TIMING11_SPUR_DELTA_PHASE, spur_delta_phase);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
|
||
|
AR_PHY_SFCORR_EXT_SPUR_SUBCHANNEL_SD, spur_subchannel_sd);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
|
||
|
AR_PHY_TIMING11_USE_SPUR_FILTER_IN_AGC, 0x1);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
|
||
|
AR_PHY_TIMING11_USE_SPUR_FILTER_IN_SELFCOR, 0x1);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
|
||
|
AR_PHY_TIMING4_ENABLE_SPUR_RSSI, 0x1);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
|
||
|
AR_PHY_SPUR_REG_SPUR_RSSI_THRESH, 34);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
|
||
|
AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 1);
|
||
|
|
||
|
if (REG_READ_FIELD(ah, AR_PHY_MODE,
|
||
|
AR_PHY_MODE_DYNAMIC) == 0x1)
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
|
||
|
AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 1);
|
||
|
|
||
|
mask_index = (freq_offset << 4) / 5;
|
||
|
if (mask_index < 0)
|
||
|
mask_index = mask_index - 1;
|
||
|
|
||
|
mask_index = mask_index & 0x7f;
|
||
|
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
|
||
|
AR_PHY_SPUR_REG_ENABLE_MASK_PPM, 0x1);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
|
||
|
AR_PHY_TIMING4_ENABLE_PILOT_MASK, 0x1);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
|
||
|
AR_PHY_TIMING4_ENABLE_CHAN_MASK, 0x1);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
|
||
|
AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_IDX_A, mask_index);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
|
||
|
AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A, mask_index);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
|
||
|
AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_IDX_A, mask_index);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
|
||
|
AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_A, 0xc);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
|
||
|
AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_A, 0xc);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
|
||
|
AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A, 0xa0);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
|
||
|
AR_PHY_SPUR_REG_MASK_RATE_CNTL, 0xff);
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_spur_ofdm_work(struct ath_hw *ah,
|
||
|
struct ath9k_channel *chan,
|
||
|
int freq_offset)
|
||
|
{
|
||
|
int spur_freq_sd = 0;
|
||
|
int spur_subchannel_sd = 0;
|
||
|
int spur_delta_phase = 0;
|
||
|
|
||
|
if (IS_CHAN_HT40(chan)) {
|
||
|
if (freq_offset < 0) {
|
||
|
if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
|
||
|
AR_PHY_GC_DYN2040_PRI_CH) == 0x0)
|
||
|
spur_subchannel_sd = 1;
|
||
|
else
|
||
|
spur_subchannel_sd = 0;
|
||
|
|
||
|
spur_freq_sd = ((freq_offset + 10) << 9) / 11;
|
||
|
|
||
|
} else {
|
||
|
if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
|
||
|
AR_PHY_GC_DYN2040_PRI_CH) == 0x0)
|
||
|
spur_subchannel_sd = 0;
|
||
|
else
|
||
|
spur_subchannel_sd = 1;
|
||
|
|
||
|
spur_freq_sd = ((freq_offset - 10) << 9) / 11;
|
||
|
|
||
|
}
|
||
|
|
||
|
spur_delta_phase = (freq_offset << 17) / 5;
|
||
|
|
||
|
} else {
|
||
|
spur_subchannel_sd = 0;
|
||
|
spur_freq_sd = (freq_offset << 9) /11;
|
||
|
spur_delta_phase = (freq_offset << 18) / 5;
|
||
|
}
|
||
|
|
||
|
spur_freq_sd = spur_freq_sd & 0x3ff;
|
||
|
spur_delta_phase = spur_delta_phase & 0xfffff;
|
||
|
|
||
|
ar9003_hw_spur_ofdm(ah,
|
||
|
freq_offset,
|
||
|
spur_freq_sd,
|
||
|
spur_delta_phase,
|
||
|
spur_subchannel_sd);
|
||
|
}
|
||
|
|
||
|
/* Spur mitigation for OFDM */
|
||
|
static void ar9003_hw_spur_mitigate_ofdm(struct ath_hw *ah,
|
||
|
struct ath9k_channel *chan)
|
||
|
{
|
||
|
int synth_freq;
|
||
|
int range = 10;
|
||
|
int freq_offset = 0;
|
||
|
int mode;
|
||
|
u8* spurChansPtr;
|
||
|
unsigned int i;
|
||
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
||
|
|
||
|
if (IS_CHAN_5GHZ(chan)) {
|
||
|
spurChansPtr = &(eep->modalHeader5G.spurChans[0]);
|
||
|
mode = 0;
|
||
|
}
|
||
|
else {
|
||
|
spurChansPtr = &(eep->modalHeader2G.spurChans[0]);
|
||
|
mode = 1;
|
||
|
}
|
||
|
|
||
|
if (spurChansPtr[0] == 0)
|
||
|
return; /* No spur in the mode */
|
||
|
|
||
|
if (IS_CHAN_HT40(chan)) {
|
||
|
range = 19;
|
||
|
if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
|
||
|
AR_PHY_GC_DYN2040_PRI_CH) == 0x0)
|
||
|
synth_freq = chan->channel - 10;
|
||
|
else
|
||
|
synth_freq = chan->channel + 10;
|
||
|
} else {
|
||
|
range = 10;
|
||
|
synth_freq = chan->channel;
|
||
|
}
|
||
|
|
||
|
ar9003_hw_spur_ofdm_clear(ah);
|
||
|
|
||
|
for (i = 0; i < AR_EEPROM_MODAL_SPURS && spurChansPtr[i]; i++) {
|
||
|
freq_offset = FBIN2FREQ(spurChansPtr[i], mode) - synth_freq;
|
||
|
if (abs(freq_offset) < range) {
|
||
|
ar9003_hw_spur_ofdm_work(ah, chan, freq_offset);
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_spur_mitigate(struct ath_hw *ah,
|
||
|
struct ath9k_channel *chan)
|
||
|
{
|
||
|
ar9003_hw_spur_mitigate_mrc_cck(ah, chan);
|
||
|
ar9003_hw_spur_mitigate_ofdm(ah, chan);
|
||
|
}
|
||
|
|
||
|
static u32 ar9003_hw_compute_pll_control(struct ath_hw *ah,
|
||
|
struct ath9k_channel *chan)
|
||
|
{
|
||
|
u32 pll;
|
||
|
|
||
|
pll = SM(0x5, AR_RTC_9300_PLL_REFDIV);
|
||
|
|
||
|
if (chan && IS_CHAN_HALF_RATE(chan))
|
||
|
pll |= SM(0x1, AR_RTC_9300_PLL_CLKSEL);
|
||
|
else if (chan && IS_CHAN_QUARTER_RATE(chan))
|
||
|
pll |= SM(0x2, AR_RTC_9300_PLL_CLKSEL);
|
||
|
|
||
|
pll |= SM(0x2c, AR_RTC_9300_PLL_DIV);
|
||
|
|
||
|
return pll;
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_set_channel_regs(struct ath_hw *ah,
|
||
|
struct ath9k_channel *chan)
|
||
|
{
|
||
|
u32 phymode;
|
||
|
u32 enableDacFifo = 0;
|
||
|
|
||
|
enableDacFifo =
|
||
|
(REG_READ(ah, AR_PHY_GEN_CTRL) & AR_PHY_GC_ENABLE_DAC_FIFO);
|
||
|
|
||
|
/* Enable 11n HT, 20 MHz */
|
||
|
phymode = AR_PHY_GC_HT_EN | AR_PHY_GC_SINGLE_HT_LTF1 |
|
||
|
AR_PHY_GC_SHORT_GI_40 | enableDacFifo;
|
||
|
|
||
|
/* Configure baseband for dynamic 20/40 operation */
|
||
|
if (IS_CHAN_HT40(chan)) {
|
||
|
phymode |= AR_PHY_GC_DYN2040_EN;
|
||
|
/* Configure control (primary) channel at +-10MHz */
|
||
|
if ((chan->chanmode == CHANNEL_A_HT40PLUS) ||
|
||
|
(chan->chanmode == CHANNEL_G_HT40PLUS))
|
||
|
phymode |= AR_PHY_GC_DYN2040_PRI_CH;
|
||
|
|
||
|
}
|
||
|
|
||
|
/* make sure we preserve INI settings */
|
||
|
phymode |= REG_READ(ah, AR_PHY_GEN_CTRL);
|
||
|
/* turn off Green Field detection for STA for now */
|
||
|
phymode &= ~AR_PHY_GC_GF_DETECT_EN;
|
||
|
|
||
|
REG_WRITE(ah, AR_PHY_GEN_CTRL, phymode);
|
||
|
|
||
|
/* Configure MAC for 20/40 operation */
|
||
|
ath9k_hw_set11nmac2040(ah);
|
||
|
|
||
|
/* global transmit timeout (25 TUs default)*/
|
||
|
REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
|
||
|
/* carrier sense timeout */
|
||
|
REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_init_bb(struct ath_hw *ah,
|
||
|
struct ath9k_channel *chan)
|
||
|
{
|
||
|
u32 synthDelay;
|
||
|
|
||
|
/*
|
||
|
* Wait for the frequency synth to settle (synth goes on
|
||
|
* via AR_PHY_ACTIVE_EN). Read the phy active delay register.
|
||
|
* Value is in 100ns increments.
|
||
|
*/
|
||
|
synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
|
||
|
if (IS_CHAN_B(chan))
|
||
|
synthDelay = (4 * synthDelay) / 22;
|
||
|
else
|
||
|
synthDelay /= 10;
|
||
|
|
||
|
/* Activate the PHY (includes baseband activate + synthesizer on) */
|
||
|
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
|
||
|
|
||
|
/*
|
||
|
* There is an issue if the AP starts the calibration before
|
||
|
* the base band timeout completes. This could result in the
|
||
|
* rx_clear false triggering. As a workaround we add delay an
|
||
|
* extra BASE_ACTIVATE_DELAY usecs to ensure this condition
|
||
|
* does not happen.
|
||
|
*/
|
||
|
udelay(synthDelay + BASE_ACTIVATE_DELAY);
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
|
||
|
{
|
||
|
switch (rx) {
|
||
|
case 0x5:
|
||
|
REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
|
||
|
AR_PHY_SWAP_ALT_CHAIN);
|
||
|
case 0x3:
|
||
|
case 0x1:
|
||
|
case 0x2:
|
||
|
case 0x7:
|
||
|
REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx);
|
||
|
REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx);
|
||
|
break;
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) && (tx == 0x7))
|
||
|
REG_WRITE(ah, AR_SELFGEN_MASK, 0x3);
|
||
|
else if (AR_SREV_9462(ah))
|
||
|
/* xxx only when MCI support is enabled */
|
||
|
REG_WRITE(ah, AR_SELFGEN_MASK, 0x3);
|
||
|
else
|
||
|
REG_WRITE(ah, AR_SELFGEN_MASK, tx);
|
||
|
|
||
|
if (tx == 0x5) {
|
||
|
REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
|
||
|
AR_PHY_SWAP_ALT_CHAIN);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Override INI values with chip specific configuration.
|
||
|
*/
|
||
|
static void ar9003_hw_override_ini(struct ath_hw *ah)
|
||
|
{
|
||
|
u32 val;
|
||
|
|
||
|
/*
|
||
|
* Set the RX_ABORT and RX_DIS and clear it only after
|
||
|
* RXE is set for MAC. This prevents frames with
|
||
|
* corrupted descriptor status.
|
||
|
*/
|
||
|
REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
|
||
|
|
||
|
/*
|
||
|
* For AR9280 and above, there is a new feature that allows
|
||
|
* Multicast search based on both MAC Address and Key ID. By default,
|
||
|
* this feature is enabled. But since the driver is not using this
|
||
|
* feature, we switch it off; otherwise multicast search based on
|
||
|
* MAC addr only will fail.
|
||
|
*/
|
||
|
val = REG_READ(ah, AR_PCU_MISC_MODE2) & (~AR_ADHOC_MCAST_KEYID_ENABLE);
|
||
|
REG_WRITE(ah, AR_PCU_MISC_MODE2,
|
||
|
val | AR_AGG_WEP_ENABLE_FIX | AR_AGG_WEP_ENABLE);
|
||
|
|
||
|
REG_SET_BIT(ah, AR_PHY_CCK_DETECT,
|
||
|
AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_prog_ini(struct ath_hw *ah,
|
||
|
struct ar5416IniArray *iniArr,
|
||
|
int column)
|
||
|
{
|
||
|
unsigned int i, regWrites = 0;
|
||
|
|
||
|
/* New INI format: Array may be undefined (pre, core, post arrays) */
|
||
|
if (!iniArr->ia_array)
|
||
|
return;
|
||
|
|
||
|
/*
|
||
|
* New INI format: Pre, core, and post arrays for a given subsystem
|
||
|
* may be modal (> 2 columns) or non-modal (2 columns). Determine if
|
||
|
* the array is non-modal and force the column to 1.
|
||
|
*/
|
||
|
if (column >= iniArr->ia_columns)
|
||
|
column = 1;
|
||
|
|
||
|
for (i = 0; i < iniArr->ia_rows; i++) {
|
||
|
u32 reg = INI_RA(iniArr, i, 0);
|
||
|
u32 val = INI_RA(iniArr, i, column);
|
||
|
|
||
|
REG_WRITE(ah, reg, val);
|
||
|
|
||
|
DO_DELAY(regWrites);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int ar9003_hw_process_ini(struct ath_hw *ah,
|
||
|
struct ath9k_channel *chan)
|
||
|
{
|
||
|
unsigned int regWrites = 0, i;
|
||
|
u32 modesIndex;
|
||
|
|
||
|
switch (chan->chanmode) {
|
||
|
case CHANNEL_A:
|
||
|
case CHANNEL_A_HT20:
|
||
|
modesIndex = 1;
|
||
|
break;
|
||
|
case CHANNEL_A_HT40PLUS:
|
||
|
case CHANNEL_A_HT40MINUS:
|
||
|
modesIndex = 2;
|
||
|
break;
|
||
|
case CHANNEL_G:
|
||
|
case CHANNEL_G_HT20:
|
||
|
case CHANNEL_B:
|
||
|
modesIndex = 4;
|
||
|
break;
|
||
|
case CHANNEL_G_HT40PLUS:
|
||
|
case CHANNEL_G_HT40MINUS:
|
||
|
modesIndex = 3;
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < ATH_INI_NUM_SPLIT; i++) {
|
||
|
ar9003_hw_prog_ini(ah, &ah->iniSOC[i], modesIndex);
|
||
|
ar9003_hw_prog_ini(ah, &ah->iniMac[i], modesIndex);
|
||
|
ar9003_hw_prog_ini(ah, &ah->iniBB[i], modesIndex);
|
||
|
ar9003_hw_prog_ini(ah, &ah->iniRadio[i], modesIndex);
|
||
|
if (i == ATH_INI_POST && AR_SREV_9462_20(ah))
|
||
|
ar9003_hw_prog_ini(ah,
|
||
|
&ah->ini_radio_post_sys2ant,
|
||
|
modesIndex);
|
||
|
}
|
||
|
|
||
|
REG_WRITE_ARRAY(&ah->iniModesRxGain, 1, regWrites);
|
||
|
REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites);
|
||
|
|
||
|
/*
|
||
|
* For 5GHz channels requiring Fast Clock, apply
|
||
|
* different modal values.
|
||
|
*/
|
||
|
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
|
||
|
REG_WRITE_ARRAY(&ah->iniModesFastClock,
|
||
|
modesIndex, regWrites);
|
||
|
|
||
|
REG_WRITE_ARRAY(&ah->iniAdditional, 1, regWrites);
|
||
|
|
||
|
if (AR_SREV_9462(ah))
|
||
|
ar9003_hw_prog_ini(ah, &ah->ini_BTCOEX_MAX_TXPWR, 1);
|
||
|
|
||
|
if (chan->channel == 2484)
|
||
|
ar9003_hw_prog_ini(ah, &ah->ini_japan2484, 1);
|
||
|
|
||
|
ah->modes_index = modesIndex;
|
||
|
ar9003_hw_override_ini(ah);
|
||
|
ar9003_hw_set_channel_regs(ah, chan);
|
||
|
ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
|
||
|
ath9k_hw_apply_txpower(ah, chan, false);
|
||
|
|
||
|
if (AR_SREV_9462(ah)) {
|
||
|
if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0,
|
||
|
AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL))
|
||
|
ah->enabled_cals |= TX_IQ_CAL;
|
||
|
else
|
||
|
ah->enabled_cals &= ~TX_IQ_CAL;
|
||
|
|
||
|
if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE)
|
||
|
ah->enabled_cals |= TX_CL_CAL;
|
||
|
else
|
||
|
ah->enabled_cals &= ~TX_CL_CAL;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_set_rfmode(struct ath_hw *ah,
|
||
|
struct ath9k_channel *chan)
|
||
|
{
|
||
|
u32 rfMode = 0;
|
||
|
|
||
|
if (chan == NULL)
|
||
|
return;
|
||
|
|
||
|
rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan))
|
||
|
? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM;
|
||
|
|
||
|
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
|
||
|
rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
|
||
|
|
||
|
REG_WRITE(ah, AR_PHY_MODE, rfMode);
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_mark_phy_inactive(struct ath_hw *ah)
|
||
|
{
|
||
|
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_set_delta_slope(struct ath_hw *ah,
|
||
|
struct ath9k_channel *chan)
|
||
|
{
|
||
|
u32 coef_scaled, ds_coef_exp, ds_coef_man;
|
||
|
u32 clockMhzScaled = 0x64000000;
|
||
|
struct chan_centers centers;
|
||
|
|
||
|
/*
|
||
|
* half and quarter rate can divide the scaled clock by 2 or 4
|
||
|
* scale for selected channel bandwidth
|
||
|
*/
|
||
|
if (IS_CHAN_HALF_RATE(chan))
|
||
|
clockMhzScaled = clockMhzScaled >> 1;
|
||
|
else if (IS_CHAN_QUARTER_RATE(chan))
|
||
|
clockMhzScaled = clockMhzScaled >> 2;
|
||
|
|
||
|
/*
|
||
|
* ALGO -> coef = 1e8/fcarrier*fclock/40;
|
||
|
* scaled coef to provide precision for this floating calculation
|
||
|
*/
|
||
|
ath9k_hw_get_channel_centers(ah, chan, ¢ers);
|
||
|
coef_scaled = clockMhzScaled / centers.synth_center;
|
||
|
|
||
|
ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
|
||
|
&ds_coef_exp);
|
||
|
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING3,
|
||
|
AR_PHY_TIMING3_DSC_MAN, ds_coef_man);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING3,
|
||
|
AR_PHY_TIMING3_DSC_EXP, ds_coef_exp);
|
||
|
|
||
|
/*
|
||
|
* For Short GI,
|
||
|
* scaled coeff is 9/10 that of normal coeff
|
||
|
*/
|
||
|
coef_scaled = (9 * coef_scaled) / 10;
|
||
|
|
||
|
ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
|
||
|
&ds_coef_exp);
|
||
|
|
||
|
/* for short gi */
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SGI_DELTA,
|
||
|
AR_PHY_SGI_DSC_MAN, ds_coef_man);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SGI_DELTA,
|
||
|
AR_PHY_SGI_DSC_EXP, ds_coef_exp);
|
||
|
}
|
||
|
|
||
|
static bool ar9003_hw_rfbus_req(struct ath_hw *ah)
|
||
|
{
|
||
|
REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_EN);
|
||
|
return ath9k_hw_wait(ah, AR_PHY_RFBUS_GRANT, AR_PHY_RFBUS_GRANT_EN,
|
||
|
AR_PHY_RFBUS_GRANT_EN, AH_WAIT_TIMEOUT);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Wait for the frequency synth to settle (synth goes on via PHY_ACTIVE_EN).
|
||
|
* Read the phy active delay register. Value is in 100ns increments.
|
||
|
*/
|
||
|
static void ar9003_hw_rfbus_done(struct ath_hw *ah)
|
||
|
{
|
||
|
u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
|
||
|
if (IS_CHAN_B(ah->curchan))
|
||
|
synthDelay = (4 * synthDelay) / 22;
|
||
|
else
|
||
|
synthDelay /= 10;
|
||
|
|
||
|
udelay(synthDelay + BASE_ACTIVATE_DELAY);
|
||
|
|
||
|
REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
|
||
|
}
|
||
|
|
||
|
static bool ar9003_hw_ani_control(struct ath_hw *ah,
|
||
|
enum ath9k_ani_cmd cmd, int param)
|
||
|
{
|
||
|
struct ath_common *common = ath9k_hw_common(ah);
|
||
|
struct ath9k_channel *chan = ah->curchan;
|
||
|
struct ar5416AniState *aniState = &chan->ani;
|
||
|
s32 value, value2;
|
||
|
|
||
|
switch (cmd & ah->ani_function) {
|
||
|
case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
|
||
|
/*
|
||
|
* on == 1 means ofdm weak signal detection is ON
|
||
|
* on == 1 is the default, for less noise immunity
|
||
|
*
|
||
|
* on == 0 means ofdm weak signal detection is OFF
|
||
|
* on == 0 means more noise imm
|
||
|
*/
|
||
|
u32 on = param ? 1 : 0;
|
||
|
/*
|
||
|
* make register setting for default
|
||
|
* (weak sig detect ON) come from INI file
|
||
|
*/
|
||
|
int m1ThreshLow = on ?
|
||
|
aniState->iniDef.m1ThreshLow : m1ThreshLow_off;
|
||
|
int m2ThreshLow = on ?
|
||
|
aniState->iniDef.m2ThreshLow : m2ThreshLow_off;
|
||
|
int m1Thresh = on ?
|
||
|
aniState->iniDef.m1Thresh : m1Thresh_off;
|
||
|
int m2Thresh = on ?
|
||
|
aniState->iniDef.m2Thresh : m2Thresh_off;
|
||
|
int m2CountThr = on ?
|
||
|
aniState->iniDef.m2CountThr : m2CountThr_off;
|
||
|
int m2CountThrLow = on ?
|
||
|
aniState->iniDef.m2CountThrLow : m2CountThrLow_off;
|
||
|
int m1ThreshLowExt = on ?
|
||
|
aniState->iniDef.m1ThreshLowExt : m1ThreshLowExt_off;
|
||
|
int m2ThreshLowExt = on ?
|
||
|
aniState->iniDef.m2ThreshLowExt : m2ThreshLowExt_off;
|
||
|
int m1ThreshExt = on ?
|
||
|
aniState->iniDef.m1ThreshExt : m1ThreshExt_off;
|
||
|
int m2ThreshExt = on ?
|
||
|
aniState->iniDef.m2ThreshExt : m2ThreshExt_off;
|
||
|
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
|
||
|
AR_PHY_SFCORR_LOW_M1_THRESH_LOW,
|
||
|
m1ThreshLow);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
|
||
|
AR_PHY_SFCORR_LOW_M2_THRESH_LOW,
|
||
|
m2ThreshLow);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR,
|
||
|
AR_PHY_SFCORR_M1_THRESH, m1Thresh);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR,
|
||
|
AR_PHY_SFCORR_M2_THRESH, m2Thresh);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR,
|
||
|
AR_PHY_SFCORR_M2COUNT_THR, m2CountThr);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
|
||
|
AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW,
|
||
|
m2CountThrLow);
|
||
|
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
|
||
|
AR_PHY_SFCORR_EXT_M1_THRESH_LOW, m1ThreshLowExt);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
|
||
|
AR_PHY_SFCORR_EXT_M2_THRESH_LOW, m2ThreshLowExt);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
|
||
|
AR_PHY_SFCORR_EXT_M1_THRESH, m1ThreshExt);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
|
||
|
AR_PHY_SFCORR_EXT_M2_THRESH, m2ThreshExt);
|
||
|
|
||
|
if (on)
|
||
|
REG_SET_BIT(ah, AR_PHY_SFCORR_LOW,
|
||
|
AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
|
||
|
else
|
||
|
REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
|
||
|
AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
|
||
|
|
||
|
if (!on != aniState->ofdmWeakSigDetectOff) {
|
||
|
ath_dbg(common, ANI,
|
||
|
"** ch %d: ofdm weak signal: %s=>%s\n",
|
||
|
chan->channel,
|
||
|
!aniState->ofdmWeakSigDetectOff ?
|
||
|
"on" : "off",
|
||
|
on ? "on" : "off");
|
||
|
if (on)
|
||
|
ah->stats.ast_ani_ofdmon++;
|
||
|
else
|
||
|
ah->stats.ast_ani_ofdmoff++;
|
||
|
aniState->ofdmWeakSigDetectOff = !on;
|
||
|
}
|
||
|
break;
|
||
|
}
|
||
|
case ATH9K_ANI_FIRSTEP_LEVEL:{
|
||
|
u32 level = param;
|
||
|
|
||
|
if (level >= ARRAY_SIZE(firstep_table)) {
|
||
|
ath_dbg(common, ANI,
|
||
|
"ATH9K_ANI_FIRSTEP_LEVEL: level out of range (%u > %zu)\n",
|
||
|
level, ARRAY_SIZE(firstep_table));
|
||
|
return false;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* make register setting relative to default
|
||
|
* from INI file & cap value
|
||
|
*/
|
||
|
value = firstep_table[level] -
|
||
|
firstep_table[ATH9K_ANI_FIRSTEP_LVL_NEW] +
|
||
|
aniState->iniDef.firstep;
|
||
|
if (value < ATH9K_SIG_FIRSTEP_SETTING_MIN)
|
||
|
value = ATH9K_SIG_FIRSTEP_SETTING_MIN;
|
||
|
if (value > ATH9K_SIG_FIRSTEP_SETTING_MAX)
|
||
|
value = ATH9K_SIG_FIRSTEP_SETTING_MAX;
|
||
|
REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
|
||
|
AR_PHY_FIND_SIG_FIRSTEP,
|
||
|
value);
|
||
|
/*
|
||
|
* we need to set first step low register too
|
||
|
* make register setting relative to default
|
||
|
* from INI file & cap value
|
||
|
*/
|
||
|
value2 = firstep_table[level] -
|
||
|
firstep_table[ATH9K_ANI_FIRSTEP_LVL_NEW] +
|
||
|
aniState->iniDef.firstepLow;
|
||
|
if (value2 < ATH9K_SIG_FIRSTEP_SETTING_MIN)
|
||
|
value2 = ATH9K_SIG_FIRSTEP_SETTING_MIN;
|
||
|
if (value2 > ATH9K_SIG_FIRSTEP_SETTING_MAX)
|
||
|
value2 = ATH9K_SIG_FIRSTEP_SETTING_MAX;
|
||
|
|
||
|
REG_RMW_FIELD(ah, AR_PHY_FIND_SIG_LOW,
|
||
|
AR_PHY_FIND_SIG_LOW_FIRSTEP_LOW, value2);
|
||
|
|
||
|
if (level != aniState->firstepLevel) {
|
||
|
ath_dbg(common, ANI,
|
||
|
"** ch %d: level %d=>%d[def:%d] firstep[level]=%d ini=%d\n",
|
||
|
chan->channel,
|
||
|
aniState->firstepLevel,
|
||
|
level,
|
||
|
ATH9K_ANI_FIRSTEP_LVL_NEW,
|
||
|
value,
|
||
|
aniState->iniDef.firstep);
|
||
|
ath_dbg(common, ANI,
|
||
|
"** ch %d: level %d=>%d[def:%d] firstep_low[level]=%d ini=%d\n",
|
||
|
chan->channel,
|
||
|
aniState->firstepLevel,
|
||
|
level,
|
||
|
ATH9K_ANI_FIRSTEP_LVL_NEW,
|
||
|
value2,
|
||
|
aniState->iniDef.firstepLow);
|
||
|
if (level > aniState->firstepLevel)
|
||
|
ah->stats.ast_ani_stepup++;
|
||
|
else if (level < aniState->firstepLevel)
|
||
|
ah->stats.ast_ani_stepdown++;
|
||
|
aniState->firstepLevel = level;
|
||
|
}
|
||
|
break;
|
||
|
}
|
||
|
case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
|
||
|
u32 level = param;
|
||
|
|
||
|
if (level >= ARRAY_SIZE(cycpwrThr1_table)) {
|
||
|
ath_dbg(common, ANI,
|
||
|
"ATH9K_ANI_SPUR_IMMUNITY_LEVEL: level out of range (%u > %zu)\n",
|
||
|
level, ARRAY_SIZE(cycpwrThr1_table));
|
||
|
return false;
|
||
|
}
|
||
|
/*
|
||
|
* make register setting relative to default
|
||
|
* from INI file & cap value
|
||
|
*/
|
||
|
value = cycpwrThr1_table[level] -
|
||
|
cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL_NEW] +
|
||
|
aniState->iniDef.cycpwrThr1;
|
||
|
if (value < ATH9K_SIG_SPUR_IMM_SETTING_MIN)
|
||
|
value = ATH9K_SIG_SPUR_IMM_SETTING_MIN;
|
||
|
if (value > ATH9K_SIG_SPUR_IMM_SETTING_MAX)
|
||
|
value = ATH9K_SIG_SPUR_IMM_SETTING_MAX;
|
||
|
REG_RMW_FIELD(ah, AR_PHY_TIMING5,
|
||
|
AR_PHY_TIMING5_CYCPWR_THR1,
|
||
|
value);
|
||
|
|
||
|
/*
|
||
|
* set AR_PHY_EXT_CCA for extension channel
|
||
|
* make register setting relative to default
|
||
|
* from INI file & cap value
|
||
|
*/
|
||
|
value2 = cycpwrThr1_table[level] -
|
||
|
cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL_NEW] +
|
||
|
aniState->iniDef.cycpwrThr1Ext;
|
||
|
if (value2 < ATH9K_SIG_SPUR_IMM_SETTING_MIN)
|
||
|
value2 = ATH9K_SIG_SPUR_IMM_SETTING_MIN;
|
||
|
if (value2 > ATH9K_SIG_SPUR_IMM_SETTING_MAX)
|
||
|
value2 = ATH9K_SIG_SPUR_IMM_SETTING_MAX;
|
||
|
REG_RMW_FIELD(ah, AR_PHY_EXT_CCA,
|
||
|
AR_PHY_EXT_CYCPWR_THR1, value2);
|
||
|
|
||
|
if (level != aniState->spurImmunityLevel) {
|
||
|
ath_dbg(common, ANI,
|
||
|
"** ch %d: level %d=>%d[def:%d] cycpwrThr1[level]=%d ini=%d\n",
|
||
|
chan->channel,
|
||
|
aniState->spurImmunityLevel,
|
||
|
level,
|
||
|
ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
|
||
|
value,
|
||
|
aniState->iniDef.cycpwrThr1);
|
||
|
ath_dbg(common, ANI,
|
||
|
"** ch %d: level %d=>%d[def:%d] cycpwrThr1Ext[level]=%d ini=%d\n",
|
||
|
chan->channel,
|
||
|
aniState->spurImmunityLevel,
|
||
|
level,
|
||
|
ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
|
||
|
value2,
|
||
|
aniState->iniDef.cycpwrThr1Ext);
|
||
|
if (level > aniState->spurImmunityLevel)
|
||
|
ah->stats.ast_ani_spurup++;
|
||
|
else if (level < aniState->spurImmunityLevel)
|
||
|
ah->stats.ast_ani_spurdown++;
|
||
|
aniState->spurImmunityLevel = level;
|
||
|
}
|
||
|
break;
|
||
|
}
|
||
|
case ATH9K_ANI_MRC_CCK:{
|
||
|
/*
|
||
|
* is_on == 1 means MRC CCK ON (default, less noise imm)
|
||
|
* is_on == 0 means MRC CCK is OFF (more noise imm)
|
||
|
*/
|
||
|
bool is_on = param ? 1 : 0;
|
||
|
REG_RMW_FIELD(ah, AR_PHY_MRC_CCK_CTRL,
|
||
|
AR_PHY_MRC_CCK_ENABLE, is_on);
|
||
|
REG_RMW_FIELD(ah, AR_PHY_MRC_CCK_CTRL,
|
||
|
AR_PHY_MRC_CCK_MUX_REG, is_on);
|
||
|
if (!is_on != aniState->mrcCCKOff) {
|
||
|
ath_dbg(common, ANI, "** ch %d: MRC CCK: %s=>%s\n",
|
||
|
chan->channel,
|
||
|
!aniState->mrcCCKOff ? "on" : "off",
|
||
|
is_on ? "on" : "off");
|
||
|
if (is_on)
|
||
|
ah->stats.ast_ani_ccklow++;
|
||
|
else
|
||
|
ah->stats.ast_ani_cckhigh++;
|
||
|
aniState->mrcCCKOff = !is_on;
|
||
|
}
|
||
|
break;
|
||
|
}
|
||
|
case ATH9K_ANI_PRESENT:
|
||
|
break;
|
||
|
default:
|
||
|
ath_dbg(common, ANI, "invalid cmd %u\n", cmd);
|
||
|
return false;
|
||
|
}
|
||
|
|
||
|
ath_dbg(common, ANI,
|
||
|
"ANI parameters: SI=%d, ofdmWS=%s FS=%d MRCcck=%s listenTime=%d ofdmErrs=%d cckErrs=%d\n",
|
||
|
aniState->spurImmunityLevel,
|
||
|
!aniState->ofdmWeakSigDetectOff ? "on" : "off",
|
||
|
aniState->firstepLevel,
|
||
|
!aniState->mrcCCKOff ? "on" : "off",
|
||
|
aniState->listenTime,
|
||
|
aniState->ofdmPhyErrCount,
|
||
|
aniState->cckPhyErrCount);
|
||
|
return true;
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_do_getnf(struct ath_hw *ah,
|
||
|
int16_t nfarray[NUM_NF_READINGS])
|
||
|
{
|
||
|
#define AR_PHY_CH_MINCCA_PWR 0x1FF00000
|
||
|
#define AR_PHY_CH_MINCCA_PWR_S 20
|
||
|
#define AR_PHY_CH_EXT_MINCCA_PWR 0x01FF0000
|
||
|
#define AR_PHY_CH_EXT_MINCCA_PWR_S 16
|
||
|
|
||
|
int16_t nf;
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
|
||
|
if (ah->rxchainmask & BIT(i)) {
|
||
|
nf = MS(REG_READ(ah, ah->nf_regs[i]),
|
||
|
AR_PHY_CH_MINCCA_PWR);
|
||
|
nfarray[i] = sign_extend32(nf, 8);
|
||
|
|
||
|
if (IS_CHAN_HT40(ah->curchan)) {
|
||
|
u8 ext_idx = AR9300_MAX_CHAINS + i;
|
||
|
|
||
|
nf = MS(REG_READ(ah, ah->nf_regs[ext_idx]),
|
||
|
AR_PHY_CH_EXT_MINCCA_PWR);
|
||
|
nfarray[ext_idx] = sign_extend32(nf, 8);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_set_nf_limits(struct ath_hw *ah)
|
||
|
{
|
||
|
ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9300_2GHZ;
|
||
|
ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9300_2GHZ;
|
||
|
ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9300_2GHZ;
|
||
|
ah->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_9300_5GHZ;
|
||
|
ah->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9300_5GHZ;
|
||
|
ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9300_5GHZ;
|
||
|
|
||
|
if (AR_SREV_9330(ah))
|
||
|
ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9330_2GHZ;
|
||
|
|
||
|
if (AR_SREV_9462(ah)) {
|
||
|
ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9462_2GHZ;
|
||
|
ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9462_2GHZ;
|
||
|
ah->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9462_5GHZ;
|
||
|
ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9462_5GHZ;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Initialize the ANI register values with default (ini) values.
|
||
|
* This routine is called during a (full) hardware reset after
|
||
|
* all the registers are initialised from the INI.
|
||
|
*/
|
||
|
static void ar9003_hw_ani_cache_ini_regs(struct ath_hw *ah)
|
||
|
{
|
||
|
struct ar5416AniState *aniState;
|
||
|
struct ath_common *common = ath9k_hw_common(ah);
|
||
|
struct ath9k_channel *chan = ah->curchan;
|
||
|
struct ath9k_ani_default *iniDef;
|
||
|
u32 val;
|
||
|
|
||
|
aniState = &ah->curchan->ani;
|
||
|
iniDef = &aniState->iniDef;
|
||
|
|
||
|
ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz/0x%x\n",
|
||
|
ah->hw_version.macVersion,
|
||
|
ah->hw_version.macRev,
|
||
|
ah->opmode,
|
||
|
chan->channel,
|
||
|
chan->channelFlags);
|
||
|
|
||
|
val = REG_READ(ah, AR_PHY_SFCORR);
|
||
|
iniDef->m1Thresh = MS(val, AR_PHY_SFCORR_M1_THRESH);
|
||
|
iniDef->m2Thresh = MS(val, AR_PHY_SFCORR_M2_THRESH);
|
||
|
iniDef->m2CountThr = MS(val, AR_PHY_SFCORR_M2COUNT_THR);
|
||
|
|
||
|
val = REG_READ(ah, AR_PHY_SFCORR_LOW);
|
||
|
iniDef->m1ThreshLow = MS(val, AR_PHY_SFCORR_LOW_M1_THRESH_LOW);
|
||
|
iniDef->m2ThreshLow = MS(val, AR_PHY_SFCORR_LOW_M2_THRESH_LOW);
|
||
|
iniDef->m2CountThrLow = MS(val, AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW);
|
||
|
|
||
|
val = REG_READ(ah, AR_PHY_SFCORR_EXT);
|
||
|
iniDef->m1ThreshExt = MS(val, AR_PHY_SFCORR_EXT_M1_THRESH);
|
||
|
iniDef->m2ThreshExt = MS(val, AR_PHY_SFCORR_EXT_M2_THRESH);
|
||
|
iniDef->m1ThreshLowExt = MS(val, AR_PHY_SFCORR_EXT_M1_THRESH_LOW);
|
||
|
iniDef->m2ThreshLowExt = MS(val, AR_PHY_SFCORR_EXT_M2_THRESH_LOW);
|
||
|
iniDef->firstep = REG_READ_FIELD(ah,
|
||
|
AR_PHY_FIND_SIG,
|
||
|
AR_PHY_FIND_SIG_FIRSTEP);
|
||
|
iniDef->firstepLow = REG_READ_FIELD(ah,
|
||
|
AR_PHY_FIND_SIG_LOW,
|
||
|
AR_PHY_FIND_SIG_LOW_FIRSTEP_LOW);
|
||
|
iniDef->cycpwrThr1 = REG_READ_FIELD(ah,
|
||
|
AR_PHY_TIMING5,
|
||
|
AR_PHY_TIMING5_CYCPWR_THR1);
|
||
|
iniDef->cycpwrThr1Ext = REG_READ_FIELD(ah,
|
||
|
AR_PHY_EXT_CCA,
|
||
|
AR_PHY_EXT_CYCPWR_THR1);
|
||
|
|
||
|
/* these levels just got reset to defaults by the INI */
|
||
|
aniState->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL_NEW;
|
||
|
aniState->firstepLevel = ATH9K_ANI_FIRSTEP_LVL_NEW;
|
||
|
aniState->ofdmWeakSigDetectOff = !ATH9K_ANI_USE_OFDM_WEAK_SIG;
|
||
|
aniState->mrcCCKOff = !ATH9K_ANI_ENABLE_MRC_CCK;
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_set_radar_params(struct ath_hw *ah,
|
||
|
struct ath_hw_radar_conf *conf)
|
||
|
{
|
||
|
u32 radar_0 = 0, radar_1 = 0;
|
||
|
|
||
|
if (!conf) {
|
||
|
REG_CLR_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_ENA);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
radar_0 |= AR_PHY_RADAR_0_ENA | AR_PHY_RADAR_0_FFT_ENA;
|
||
|
radar_0 |= SM(conf->fir_power, AR_PHY_RADAR_0_FIRPWR);
|
||
|
radar_0 |= SM(conf->radar_rssi, AR_PHY_RADAR_0_RRSSI);
|
||
|
radar_0 |= SM(conf->pulse_height, AR_PHY_RADAR_0_HEIGHT);
|
||
|
radar_0 |= SM(conf->pulse_rssi, AR_PHY_RADAR_0_PRSSI);
|
||
|
radar_0 |= SM(conf->pulse_inband, AR_PHY_RADAR_0_INBAND);
|
||
|
|
||
|
radar_1 |= AR_PHY_RADAR_1_MAX_RRSSI;
|
||
|
radar_1 |= AR_PHY_RADAR_1_BLOCK_CHECK;
|
||
|
radar_1 |= SM(conf->pulse_maxlen, AR_PHY_RADAR_1_MAXLEN);
|
||
|
radar_1 |= SM(conf->pulse_inband_step, AR_PHY_RADAR_1_RELSTEP_THRESH);
|
||
|
radar_1 |= SM(conf->radar_inband, AR_PHY_RADAR_1_RELPWR_THRESH);
|
||
|
|
||
|
REG_WRITE(ah, AR_PHY_RADAR_0, radar_0);
|
||
|
REG_WRITE(ah, AR_PHY_RADAR_1, radar_1);
|
||
|
if (conf->ext_channel)
|
||
|
REG_SET_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA);
|
||
|
else
|
||
|
REG_CLR_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA);
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_set_radar_conf(struct ath_hw *ah)
|
||
|
{
|
||
|
struct ath_hw_radar_conf *conf = &ah->radar_conf;
|
||
|
|
||
|
conf->fir_power = -28;
|
||
|
conf->radar_rssi = 0;
|
||
|
conf->pulse_height = 10;
|
||
|
conf->pulse_rssi = 24;
|
||
|
conf->pulse_inband = 8;
|
||
|
conf->pulse_maxlen = 255;
|
||
|
conf->pulse_inband_step = 12;
|
||
|
conf->radar_inband = 8;
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_antdiv_comb_conf_get(struct ath_hw *ah,
|
||
|
struct ath_hw_antcomb_conf *antconf)
|
||
|
{
|
||
|
u32 regval;
|
||
|
|
||
|
regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
|
||
|
antconf->main_lna_conf = (regval & AR_PHY_9485_ANT_DIV_MAIN_LNACONF) >>
|
||
|
AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S;
|
||
|
antconf->alt_lna_conf = (regval & AR_PHY_9485_ANT_DIV_ALT_LNACONF) >>
|
||
|
AR_PHY_9485_ANT_DIV_ALT_LNACONF_S;
|
||
|
antconf->fast_div_bias = (regval & AR_PHY_9485_ANT_FAST_DIV_BIAS) >>
|
||
|
AR_PHY_9485_ANT_FAST_DIV_BIAS_S;
|
||
|
|
||
|
if (AR_SREV_9330_11(ah)) {
|
||
|
antconf->lna1_lna2_delta = -9;
|
||
|
antconf->div_group = 1;
|
||
|
} else if (AR_SREV_9485(ah)) {
|
||
|
antconf->lna1_lna2_delta = -9;
|
||
|
antconf->div_group = 2;
|
||
|
} else {
|
||
|
antconf->lna1_lna2_delta = -3;
|
||
|
antconf->div_group = 0;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void ar9003_hw_antdiv_comb_conf_set(struct ath_hw *ah,
|
||
|
struct ath_hw_antcomb_conf *antconf)
|
||
|
{
|
||
|
u32 regval;
|
||
|
|
||
|
regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
|
||
|
regval &= ~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF |
|
||
|
AR_PHY_9485_ANT_DIV_ALT_LNACONF |
|
||
|
AR_PHY_9485_ANT_FAST_DIV_BIAS |
|
||
|
AR_PHY_9485_ANT_DIV_MAIN_GAINTB |
|
||
|
AR_PHY_9485_ANT_DIV_ALT_GAINTB);
|
||
|
regval |= ((antconf->main_lna_conf <<
|
||
|
AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S)
|
||
|
& AR_PHY_9485_ANT_DIV_MAIN_LNACONF);
|
||
|
regval |= ((antconf->alt_lna_conf << AR_PHY_9485_ANT_DIV_ALT_LNACONF_S)
|
||
|
& AR_PHY_9485_ANT_DIV_ALT_LNACONF);
|
||
|
regval |= ((antconf->fast_div_bias << AR_PHY_9485_ANT_FAST_DIV_BIAS_S)
|
||
|
& AR_PHY_9485_ANT_FAST_DIV_BIAS);
|
||
|
regval |= ((antconf->main_gaintb << AR_PHY_9485_ANT_DIV_MAIN_GAINTB_S)
|
||
|
& AR_PHY_9485_ANT_DIV_MAIN_GAINTB);
|
||
|
regval |= ((antconf->alt_gaintb << AR_PHY_9485_ANT_DIV_ALT_GAINTB_S)
|
||
|
& AR_PHY_9485_ANT_DIV_ALT_GAINTB);
|
||
|
|
||
|
REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
|
||
|
}
|
||
|
|
||
|
static int ar9003_hw_fast_chan_change(struct ath_hw *ah,
|
||
|
struct ath9k_channel *chan,
|
||
|
u8 *ini_reloaded)
|
||
|
{
|
||
|
unsigned int regWrites = 0;
|
||
|
u32 modesIndex;
|
||
|
|
||
|
switch (chan->chanmode) {
|
||
|
case CHANNEL_A:
|
||
|
case CHANNEL_A_HT20:
|
||
|
modesIndex = 1;
|
||
|
break;
|
||
|
case CHANNEL_A_HT40PLUS:
|
||
|
case CHANNEL_A_HT40MINUS:
|
||
|
modesIndex = 2;
|
||
|
break;
|
||
|
case CHANNEL_G:
|
||
|
case CHANNEL_G_HT20:
|
||
|
case CHANNEL_B:
|
||
|
modesIndex = 4;
|
||
|
break;
|
||
|
case CHANNEL_G_HT40PLUS:
|
||
|
case CHANNEL_G_HT40MINUS:
|
||
|
modesIndex = 3;
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
if (modesIndex == ah->modes_index) {
|
||
|
*ini_reloaded = false;
|
||
|
goto set_rfmode;
|
||
|
}
|
||
|
|
||
|
ar9003_hw_prog_ini(ah, &ah->iniSOC[ATH_INI_POST], modesIndex);
|
||
|
ar9003_hw_prog_ini(ah, &ah->iniMac[ATH_INI_POST], modesIndex);
|
||
|
ar9003_hw_prog_ini(ah, &ah->iniBB[ATH_INI_POST], modesIndex);
|
||
|
ar9003_hw_prog_ini(ah, &ah->iniRadio[ATH_INI_POST], modesIndex);
|
||
|
if (AR_SREV_9462_20(ah))
|
||
|
ar9003_hw_prog_ini(ah,
|
||
|
&ah->ini_radio_post_sys2ant,
|
||
|
modesIndex);
|
||
|
|
||
|
REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites);
|
||
|
|
||
|
/*
|
||
|
* For 5GHz channels requiring Fast Clock, apply
|
||
|
* different modal values.
|
||
|
*/
|
||
|
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
|
||
|
REG_WRITE_ARRAY(&ah->iniModesFastClock, modesIndex, regWrites);
|
||
|
|
||
|
REG_WRITE_ARRAY(&ah->iniAdditional, 1, regWrites);
|
||
|
|
||
|
ah->modes_index = modesIndex;
|
||
|
*ini_reloaded = true;
|
||
|
|
||
|
set_rfmode:
|
||
|
ar9003_hw_set_rfmode(ah, chan);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
|
||
|
{
|
||
|
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
|
||
|
struct ath_hw_ops *ops = ath9k_hw_ops(ah);
|
||
|
static const u32 ar9300_cca_regs[6] = {
|
||
|
AR_PHY_CCA_0,
|
||
|
AR_PHY_CCA_1,
|
||
|
AR_PHY_CCA_2,
|
||
|
AR_PHY_EXT_CCA,
|
||
|
AR_PHY_EXT_CCA_1,
|
||
|
AR_PHY_EXT_CCA_2,
|
||
|
};
|
||
|
|
||
|
priv_ops->rf_set_freq = ar9003_hw_set_channel;
|
||
|
priv_ops->spur_mitigate_freq = ar9003_hw_spur_mitigate;
|
||
|
priv_ops->compute_pll_control = ar9003_hw_compute_pll_control;
|
||
|
priv_ops->set_channel_regs = ar9003_hw_set_channel_regs;
|
||
|
priv_ops->init_bb = ar9003_hw_init_bb;
|
||
|
priv_ops->process_ini = ar9003_hw_process_ini;
|
||
|
priv_ops->set_rfmode = ar9003_hw_set_rfmode;
|
||
|
priv_ops->mark_phy_inactive = ar9003_hw_mark_phy_inactive;
|
||
|
priv_ops->set_delta_slope = ar9003_hw_set_delta_slope;
|
||
|
priv_ops->rfbus_req = ar9003_hw_rfbus_req;
|
||
|
priv_ops->rfbus_done = ar9003_hw_rfbus_done;
|
||
|
priv_ops->ani_control = ar9003_hw_ani_control;
|
||
|
priv_ops->do_getnf = ar9003_hw_do_getnf;
|
||
|
priv_ops->ani_cache_ini_regs = ar9003_hw_ani_cache_ini_regs;
|
||
|
priv_ops->set_radar_params = ar9003_hw_set_radar_params;
|
||
|
priv_ops->fast_chan_change = ar9003_hw_fast_chan_change;
|
||
|
|
||
|
ops->antdiv_comb_conf_get = ar9003_hw_antdiv_comb_conf_get;
|
||
|
ops->antdiv_comb_conf_set = ar9003_hw_antdiv_comb_conf_set;
|
||
|
|
||
|
ar9003_hw_set_nf_limits(ah);
|
||
|
ar9003_hw_set_radar_conf(ah);
|
||
|
memcpy(ah->nf_regs, ar9300_cca_regs, sizeof(ah->nf_regs));
|
||
|
}
|
||
|
|
||
|
void ar9003_hw_bb_watchdog_config(struct ath_hw *ah)
|
||
|
{
|
||
|
struct ath_common *common = ath9k_hw_common(ah);
|
||
|
u32 idle_tmo_ms = ah->bb_watchdog_timeout_ms;
|
||
|
u32 val, idle_count;
|
||
|
|
||
|
if (!idle_tmo_ms) {
|
||
|
/* disable IRQ, disable chip-reset for BB panic */
|
||
|
REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_2,
|
||
|
REG_READ(ah, AR_PHY_WATCHDOG_CTL_2) &
|
||
|
~(AR_PHY_WATCHDOG_RST_ENABLE |
|
||
|
AR_PHY_WATCHDOG_IRQ_ENABLE));
|
||
|
|
||
|
/* disable watchdog in non-IDLE mode, disable in IDLE mode */
|
||
|
REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_1,
|
||
|
REG_READ(ah, AR_PHY_WATCHDOG_CTL_1) &
|
||
|
~(AR_PHY_WATCHDOG_NON_IDLE_ENABLE |
|
||
|
AR_PHY_WATCHDOG_IDLE_ENABLE));
|
||
|
|
||
|
ath_dbg(common, RESET, "Disabled BB Watchdog\n");
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/* enable IRQ, disable chip-reset for BB watchdog */
|
||
|
val = REG_READ(ah, AR_PHY_WATCHDOG_CTL_2) & AR_PHY_WATCHDOG_CNTL2_MASK;
|
||
|
REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_2,
|
||
|
(val | AR_PHY_WATCHDOG_IRQ_ENABLE) &
|
||
|
~AR_PHY_WATCHDOG_RST_ENABLE);
|
||
|
|
||
|
/* bound limit to 10 secs */
|
||
|
if (idle_tmo_ms > 10000)
|
||
|
idle_tmo_ms = 10000;
|
||
|
|
||
|
/*
|
||
|
* The time unit for watchdog event is 2^15 44/88MHz cycles.
|
||
|
*
|
||
|
* For HT20 we have a time unit of 2^15/44 MHz = .74 ms per tick
|
||
|
* For HT40 we have a time unit of 2^15/88 MHz = .37 ms per tick
|
||
|
*
|
||
|
* Given we use fast clock now in 5 GHz, these time units should
|
||
|
* be common for both 2 GHz and 5 GHz.
|
||
|
*/
|
||
|
idle_count = (100 * idle_tmo_ms) / 74;
|
||
|
if (ah->curchan && IS_CHAN_HT40(ah->curchan))
|
||
|
idle_count = (100 * idle_tmo_ms) / 37;
|
||
|
|
||
|
/*
|
||
|
* enable watchdog in non-IDLE mode, disable in IDLE mode,
|
||
|
* set idle time-out.
|
||
|
*/
|
||
|
REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_1,
|
||
|
AR_PHY_WATCHDOG_NON_IDLE_ENABLE |
|
||
|
AR_PHY_WATCHDOG_IDLE_MASK |
|
||
|
(AR_PHY_WATCHDOG_NON_IDLE_MASK & (idle_count << 2)));
|
||
|
|
||
|
ath_dbg(common, RESET, "Enabled BB Watchdog timeout (%u ms)\n",
|
||
|
idle_tmo_ms);
|
||
|
}
|
||
|
|
||
|
void ar9003_hw_bb_watchdog_read(struct ath_hw *ah)
|
||
|
{
|
||
|
/*
|
||
|
* we want to avoid printing in ISR context so we save the
|
||
|
* watchdog status to be printed later in bottom half context.
|
||
|
*/
|
||
|
ah->bb_watchdog_last_status = REG_READ(ah, AR_PHY_WATCHDOG_STATUS);
|
||
|
|
||
|
/*
|
||
|
* the watchdog timer should reset on status read but to be sure
|
||
|
* sure we write 0 to the watchdog status bit.
|
||
|
*/
|
||
|
REG_WRITE(ah, AR_PHY_WATCHDOG_STATUS,
|
||
|
ah->bb_watchdog_last_status & ~AR_PHY_WATCHDOG_STATUS_CLR);
|
||
|
}
|
||
|
|
||
|
void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah)
|
||
|
{
|
||
|
struct ath_common *common = ath9k_hw_common(ah);
|
||
|
u32 status;
|
||
|
|
||
|
if (likely(!(common->debug_mask & ATH_DBG_RESET)))
|
||
|
return;
|
||
|
|
||
|
status = ah->bb_watchdog_last_status;
|
||
|
ath_dbg(common, RESET,
|
||
|
"\n==== BB update: BB status=0x%08x ====\n", status);
|
||
|
ath_dbg(common, RESET,
|
||
|
"** BB state: wd=%u det=%u rdar=%u rOFDM=%d rCCK=%u tOFDM=%u tCCK=%u agc=%u src=%u **\n",
|
||
|
MS(status, AR_PHY_WATCHDOG_INFO),
|
||
|
MS(status, AR_PHY_WATCHDOG_DET_HANG),
|
||
|
MS(status, AR_PHY_WATCHDOG_RADAR_SM),
|
||
|
MS(status, AR_PHY_WATCHDOG_RX_OFDM_SM),
|
||
|
MS(status, AR_PHY_WATCHDOG_RX_CCK_SM),
|
||
|
MS(status, AR_PHY_WATCHDOG_TX_OFDM_SM),
|
||
|
MS(status, AR_PHY_WATCHDOG_TX_CCK_SM),
|
||
|
MS(status, AR_PHY_WATCHDOG_AGC_SM),
|
||
|
MS(status, AR_PHY_WATCHDOG_SRCH_SM));
|
||
|
|
||
|
ath_dbg(common, RESET, "** BB WD cntl: cntl1=0x%08x cntl2=0x%08x **\n",
|
||
|
REG_READ(ah, AR_PHY_WATCHDOG_CTL_1),
|
||
|
REG_READ(ah, AR_PHY_WATCHDOG_CTL_2));
|
||
|
ath_dbg(common, RESET, "** BB mode: BB_gen_controls=0x%08x **\n",
|
||
|
REG_READ(ah, AR_PHY_GEN_CTRL));
|
||
|
|
||
|
#define PCT(_field) (common->cc_survey._field * 100 / common->cc_survey.cycles)
|
||
|
if (common->cc_survey.cycles)
|
||
|
ath_dbg(common, RESET,
|
||
|
"** BB busy times: rx_clear=%d%%, rx_frame=%d%%, tx_frame=%d%% **\n",
|
||
|
PCT(rx_busy), PCT(rx_frame), PCT(tx_frame));
|
||
|
|
||
|
ath_dbg(common, RESET, "==== BB update: done ====\n\n");
|
||
|
}
|
||
|
EXPORT_SYMBOL(ar9003_hw_bb_watchdog_dbg_info);
|
||
|
|
||
|
void ar9003_hw_disable_phy_restart(struct ath_hw *ah)
|
||
|
{
|
||
|
u32 val;
|
||
|
|
||
|
/* While receiving unsupported rate frame rx state machine
|
||
|
* gets into a state 0xb and if phy_restart happens in that
|
||
|
* state, BB would go hang. If RXSM is in 0xb state after
|
||
|
* first bb panic, ensure to disable the phy_restart.
|
||
|
*/
|
||
|
if (!((MS(ah->bb_watchdog_last_status,
|
||
|
AR_PHY_WATCHDOG_RX_OFDM_SM) == 0xb) ||
|
||
|
ah->bb_hang_rx_ofdm))
|
||
|
return;
|
||
|
|
||
|
ah->bb_hang_rx_ofdm = true;
|
||
|
val = REG_READ(ah, AR_PHY_RESTART);
|
||
|
val &= ~AR_PHY_RESTART_ENA;
|
||
|
|
||
|
REG_WRITE(ah, AR_PHY_RESTART, val);
|
||
|
}
|
||
|
EXPORT_SYMBOL(ar9003_hw_disable_phy_restart);
|