M7350/kernel/drivers/message/i2o/iop.c

1249 lines
32 KiB
C
Raw Normal View History

2024-09-09 08:52:07 +00:00
/*
* Functions to handle I2O controllers and I2O message handling
*
* Copyright (C) 1999-2002 Red Hat Software
*
* Written by Alan Cox, Building Number Three Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* A lot of the I2O message side code from this is taken from the
* Red Creek RCPCI45 adapter driver by Red Creek Communications
*
* Fixes/additions:
* Philipp Rumpf
* Juha Sievänen <Juha.Sievanen@cs.Helsinki.FI>
* Auvo Häkkinen <Auvo.Hakkinen@cs.Helsinki.FI>
* Deepak Saxena <deepak@plexity.net>
* Boji T Kannanthanam <boji.t.kannanthanam@intel.com>
* Alan Cox <alan@lxorguk.ukuu.org.uk>:
* Ported to Linux 2.5.
* Markus Lidel <Markus.Lidel@shadowconnect.com>:
* Minor fixes for 2.6.
*/
#include <linux/module.h>
#include <linux/i2o.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include "core.h"
#define OSM_NAME "i2o"
#define OSM_VERSION "1.325"
#define OSM_DESCRIPTION "I2O subsystem"
/* global I2O controller list */
LIST_HEAD(i2o_controllers);
/*
* global I2O System Table. Contains information about all the IOPs in the
* system. Used to inform IOPs about each others existence.
*/
static struct i2o_dma i2o_systab;
static int i2o_hrt_get(struct i2o_controller *c);
/**
* i2o_msg_get_wait - obtain an I2O message from the IOP
* @c: I2O controller
* @wait: how long to wait until timeout
*
* This function waits up to wait seconds for a message slot to be
* available.
*
* On a success the message is returned and the pointer to the message is
* set in msg. The returned message is the physical page frame offset
* address from the read port (see the i2o spec). If no message is
* available returns I2O_QUEUE_EMPTY and msg is leaved untouched.
*/
struct i2o_message *i2o_msg_get_wait(struct i2o_controller *c, int wait)
{
unsigned long timeout = jiffies + wait * HZ;
struct i2o_message *msg;
while (IS_ERR(msg = i2o_msg_get(c))) {
if (time_after(jiffies, timeout)) {
osm_debug("%s: Timeout waiting for message frame.\n",
c->name);
return ERR_PTR(-ETIMEDOUT);
}
schedule_timeout_uninterruptible(1);
}
return msg;
};
#if BITS_PER_LONG == 64
/**
* i2o_cntxt_list_add - Append a pointer to context list and return a id
* @c: controller to which the context list belong
* @ptr: pointer to add to the context list
*
* Because the context field in I2O is only 32-bit large, on 64-bit the
* pointer is to large to fit in the context field. The i2o_cntxt_list
* functions therefore map pointers to context fields.
*
* Returns context id > 0 on success or 0 on failure.
*/
u32 i2o_cntxt_list_add(struct i2o_controller * c, void *ptr)
{
struct i2o_context_list_element *entry;
unsigned long flags;
if (!ptr)
osm_err("%s: couldn't add NULL pointer to context list!\n",
c->name);
entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
if (!entry) {
osm_err("%s: Could not allocate memory for context list element"
"\n", c->name);
return 0;
}
entry->ptr = ptr;
entry->timestamp = jiffies;
INIT_LIST_HEAD(&entry->list);
spin_lock_irqsave(&c->context_list_lock, flags);
if (unlikely(atomic_inc_and_test(&c->context_list_counter)))
atomic_inc(&c->context_list_counter);
entry->context = atomic_read(&c->context_list_counter);
list_add(&entry->list, &c->context_list);
spin_unlock_irqrestore(&c->context_list_lock, flags);
osm_debug("%s: Add context to list %p -> %d\n", c->name, ptr, context);
return entry->context;
};
/**
* i2o_cntxt_list_remove - Remove a pointer from the context list
* @c: controller to which the context list belong
* @ptr: pointer which should be removed from the context list
*
* Removes a previously added pointer from the context list and returns
* the matching context id.
*
* Returns context id on success or 0 on failure.
*/
u32 i2o_cntxt_list_remove(struct i2o_controller * c, void *ptr)
{
struct i2o_context_list_element *entry;
u32 context = 0;
unsigned long flags;
spin_lock_irqsave(&c->context_list_lock, flags);
list_for_each_entry(entry, &c->context_list, list)
if (entry->ptr == ptr) {
list_del(&entry->list);
context = entry->context;
kfree(entry);
break;
}
spin_unlock_irqrestore(&c->context_list_lock, flags);
if (!context)
osm_warn("%s: Could not remove nonexistent ptr %p\n", c->name,
ptr);
osm_debug("%s: remove ptr from context list %d -> %p\n", c->name,
context, ptr);
return context;
};
/**
* i2o_cntxt_list_get - Get a pointer from the context list and remove it
* @c: controller to which the context list belong
* @context: context id to which the pointer belong
*
* Returns pointer to the matching context id on success or NULL on
* failure.
*/
void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context)
{
struct i2o_context_list_element *entry;
unsigned long flags;
void *ptr = NULL;
spin_lock_irqsave(&c->context_list_lock, flags);
list_for_each_entry(entry, &c->context_list, list)
if (entry->context == context) {
list_del(&entry->list);
ptr = entry->ptr;
kfree(entry);
break;
}
spin_unlock_irqrestore(&c->context_list_lock, flags);
if (!ptr)
osm_warn("%s: context id %d not found\n", c->name, context);
osm_debug("%s: get ptr from context list %d -> %p\n", c->name, context,
ptr);
return ptr;
};
/**
* i2o_cntxt_list_get_ptr - Get a context id from the context list
* @c: controller to which the context list belong
* @ptr: pointer to which the context id should be fetched
*
* Returns context id which matches to the pointer on success or 0 on
* failure.
*/
u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr)
{
struct i2o_context_list_element *entry;
u32 context = 0;
unsigned long flags;
spin_lock_irqsave(&c->context_list_lock, flags);
list_for_each_entry(entry, &c->context_list, list)
if (entry->ptr == ptr) {
context = entry->context;
break;
}
spin_unlock_irqrestore(&c->context_list_lock, flags);
if (!context)
osm_warn("%s: Could not find nonexistent ptr %p\n", c->name,
ptr);
osm_debug("%s: get context id from context list %p -> %d\n", c->name,
ptr, context);
return context;
};
#endif
/**
* i2o_iop_find - Find an I2O controller by id
* @unit: unit number of the I2O controller to search for
*
* Lookup the I2O controller on the controller list.
*
* Returns pointer to the I2O controller on success or NULL if not found.
*/
struct i2o_controller *i2o_find_iop(int unit)
{
struct i2o_controller *c;
list_for_each_entry(c, &i2o_controllers, list) {
if (c->unit == unit)
return c;
}
return NULL;
};
/**
* i2o_iop_find_device - Find a I2O device on an I2O controller
* @c: I2O controller where the I2O device hangs on
* @tid: TID of the I2O device to search for
*
* Searches the devices of the I2O controller for a device with TID tid and
* returns it.
*
* Returns a pointer to the I2O device if found, otherwise NULL.
*/
struct i2o_device *i2o_iop_find_device(struct i2o_controller *c, u16 tid)
{
struct i2o_device *dev;
list_for_each_entry(dev, &c->devices, list)
if (dev->lct_data.tid == tid)
return dev;
return NULL;
};
/**
* i2o_quiesce_controller - quiesce controller
* @c: controller
*
* Quiesce an IOP. Causes IOP to make external operation quiescent
* (i2o 'READY' state). Internal operation of the IOP continues normally.
*
* Returns 0 on success or negative error code on failure.
*/
static int i2o_iop_quiesce(struct i2o_controller *c)
{
struct i2o_message *msg;
i2o_status_block *sb = c->status_block.virt;
int rc;
i2o_status_get(c);
/* SysQuiesce discarded if IOP not in READY or OPERATIONAL state */
if ((sb->iop_state != ADAPTER_STATE_READY) &&
(sb->iop_state != ADAPTER_STATE_OPERATIONAL))
return 0;
msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
if (IS_ERR(msg))
return PTR_ERR(msg);
msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0);
msg->u.head[1] =
cpu_to_le32(I2O_CMD_SYS_QUIESCE << 24 | HOST_TID << 12 |
ADAPTER_TID);
/* Long timeout needed for quiesce if lots of devices */
if ((rc = i2o_msg_post_wait(c, msg, 240)))
osm_info("%s: Unable to quiesce (status=%#x).\n", c->name, -rc);
else
osm_debug("%s: Quiesced.\n", c->name);
i2o_status_get(c); // Entered READY state
return rc;
};
/**
* i2o_iop_enable - move controller from ready to OPERATIONAL
* @c: I2O controller
*
* Enable IOP. This allows the IOP to resume external operations and
* reverses the effect of a quiesce. Returns zero or an error code if
* an error occurs.
*/
static int i2o_iop_enable(struct i2o_controller *c)
{
struct i2o_message *msg;
i2o_status_block *sb = c->status_block.virt;
int rc;
i2o_status_get(c);
/* Enable only allowed on READY state */
if (sb->iop_state != ADAPTER_STATE_READY)
return -EINVAL;
msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
if (IS_ERR(msg))
return PTR_ERR(msg);
msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0);
msg->u.head[1] =
cpu_to_le32(I2O_CMD_SYS_ENABLE << 24 | HOST_TID << 12 |
ADAPTER_TID);
/* How long of a timeout do we need? */
if ((rc = i2o_msg_post_wait(c, msg, 240)))
osm_err("%s: Could not enable (status=%#x).\n", c->name, -rc);
else
osm_debug("%s: Enabled.\n", c->name);
i2o_status_get(c); // entered OPERATIONAL state
return rc;
};
/**
* i2o_iop_quiesce_all - Quiesce all I2O controllers on the system
*
* Quiesce all I2O controllers which are connected to the system.
*/
static inline void i2o_iop_quiesce_all(void)
{
struct i2o_controller *c, *tmp;
list_for_each_entry_safe(c, tmp, &i2o_controllers, list) {
if (!c->no_quiesce)
i2o_iop_quiesce(c);
}
};
/**
* i2o_iop_enable_all - Enables all controllers on the system
*
* Enables all I2O controllers which are connected to the system.
*/
static inline void i2o_iop_enable_all(void)
{
struct i2o_controller *c, *tmp;
list_for_each_entry_safe(c, tmp, &i2o_controllers, list)
i2o_iop_enable(c);
};
/**
* i2o_clear_controller - Bring I2O controller into HOLD state
* @c: controller
*
* Clear an IOP to HOLD state, ie. terminate external operations, clear all
* input queues and prepare for a system restart. IOP's internal operation
* continues normally and the outbound queue is alive. The IOP is not
* expected to rebuild its LCT.
*
* Returns 0 on success or negative error code on failure.
*/
static int i2o_iop_clear(struct i2o_controller *c)
{
struct i2o_message *msg;
int rc;
msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
if (IS_ERR(msg))
return PTR_ERR(msg);
/* Quiesce all IOPs first */
i2o_iop_quiesce_all();
msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0);
msg->u.head[1] =
cpu_to_le32(I2O_CMD_ADAPTER_CLEAR << 24 | HOST_TID << 12 |
ADAPTER_TID);
if ((rc = i2o_msg_post_wait(c, msg, 30)))
osm_info("%s: Unable to clear (status=%#x).\n", c->name, -rc);
else
osm_debug("%s: Cleared.\n", c->name);
/* Enable all IOPs */
i2o_iop_enable_all();
return rc;
}
/**
* i2o_iop_init_outbound_queue - setup the outbound message queue
* @c: I2O controller
*
* Clear and (re)initialize IOP's outbound queue and post the message
* frames to the IOP.
*
* Returns 0 on success or negative error code on failure.
*/
static int i2o_iop_init_outbound_queue(struct i2o_controller *c)
{
u32 m;
volatile u8 *status = c->status.virt;
struct i2o_message *msg;
ulong timeout;
int i;
osm_debug("%s: Initializing Outbound Queue...\n", c->name);
memset(c->status.virt, 0, 4);
msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
if (IS_ERR(msg))
return PTR_ERR(msg);
msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6);
msg->u.head[1] =
cpu_to_le32(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 |
ADAPTER_TID);
msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context);
msg->u.s.tcntxt = cpu_to_le32(0x00000000);
msg->body[0] = cpu_to_le32(PAGE_SIZE);
/* Outbound msg frame size in words and Initcode */
msg->body[1] = cpu_to_le32(I2O_OUTBOUND_MSG_FRAME_SIZE << 16 | 0x80);
msg->body[2] = cpu_to_le32(0xd0000004);
msg->body[3] = cpu_to_le32(i2o_dma_low(c->status.phys));
msg->body[4] = cpu_to_le32(i2o_dma_high(c->status.phys));
i2o_msg_post(c, msg);
timeout = jiffies + I2O_TIMEOUT_INIT_OUTBOUND_QUEUE * HZ;
while (*status <= I2O_CMD_IN_PROGRESS) {
if (time_after(jiffies, timeout)) {
osm_warn("%s: Timeout Initializing\n", c->name);
return -ETIMEDOUT;
}
schedule_timeout_uninterruptible(1);
}
m = c->out_queue.phys;
/* Post frames */
for (i = 0; i < I2O_MAX_OUTBOUND_MSG_FRAMES; i++) {
i2o_flush_reply(c, m);
udelay(1); /* Promise */
m += I2O_OUTBOUND_MSG_FRAME_SIZE * sizeof(u32);
}
return 0;
}
/**
* i2o_iop_reset - reset an I2O controller
* @c: controller to reset
*
* Reset the IOP into INIT state and wait until IOP gets into RESET state.
* Terminate all external operations, clear IOP's inbound and outbound
* queues, terminate all DDMs, and reload the IOP's operating environment
* and all local DDMs. The IOP rebuilds its LCT.
*/
static int i2o_iop_reset(struct i2o_controller *c)
{
volatile u8 *status = c->status.virt;
struct i2o_message *msg;
unsigned long timeout;
i2o_status_block *sb = c->status_block.virt;
int rc = 0;
osm_debug("%s: Resetting controller\n", c->name);
msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
if (IS_ERR(msg))
return PTR_ERR(msg);
memset(c->status_block.virt, 0, 8);
/* Quiesce all IOPs first */
i2o_iop_quiesce_all();
msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_0);
msg->u.head[1] =
cpu_to_le32(I2O_CMD_ADAPTER_RESET << 24 | HOST_TID << 12 |
ADAPTER_TID);
msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context);
msg->u.s.tcntxt = cpu_to_le32(0x00000000);
msg->body[0] = cpu_to_le32(0x00000000);
msg->body[1] = cpu_to_le32(0x00000000);
msg->body[2] = cpu_to_le32(i2o_dma_low(c->status.phys));
msg->body[3] = cpu_to_le32(i2o_dma_high(c->status.phys));
i2o_msg_post(c, msg);
/* Wait for a reply */
timeout = jiffies + I2O_TIMEOUT_RESET * HZ;
while (!*status) {
if (time_after(jiffies, timeout))
break;
schedule_timeout_uninterruptible(1);
}
switch (*status) {
case I2O_CMD_REJECTED:
osm_warn("%s: IOP reset rejected\n", c->name);
rc = -EPERM;
break;
case I2O_CMD_IN_PROGRESS:
/*
* Once the reset is sent, the IOP goes into the INIT state
* which is indeterminate. We need to wait until the IOP has
* rebooted before we can let the system talk to it. We read
* the inbound Free_List until a message is available. If we
* can't read one in the given amount of time, we assume the
* IOP could not reboot properly.
*/
osm_debug("%s: Reset in progress, waiting for reboot...\n",
c->name);
while (IS_ERR(msg = i2o_msg_get_wait(c, I2O_TIMEOUT_RESET))) {
if (time_after(jiffies, timeout)) {
osm_err("%s: IOP reset timeout.\n", c->name);
rc = PTR_ERR(msg);
goto exit;
}
schedule_timeout_uninterruptible(1);
}
i2o_msg_nop(c, msg);
/* from here all quiesce commands are safe */
c->no_quiesce = 0;
/* verify if controller is in state RESET */
i2o_status_get(c);
if (!c->promise && (sb->iop_state != ADAPTER_STATE_RESET))
osm_warn("%s: reset completed, but adapter not in RESET"
" state.\n", c->name);
else
osm_debug("%s: reset completed.\n", c->name);
break;
default:
osm_err("%s: IOP reset timeout.\n", c->name);
rc = -ETIMEDOUT;
break;
}
exit:
/* Enable all IOPs */
i2o_iop_enable_all();
return rc;
};
/**
* i2o_iop_activate - Bring controller up to HOLD
* @c: controller
*
* This function brings an I2O controller into HOLD state. The adapter
* is reset if necessary and then the queues and resource table are read.
*
* Returns 0 on success or negative error code on failure.
*/
static int i2o_iop_activate(struct i2o_controller *c)
{
i2o_status_block *sb = c->status_block.virt;
int rc;
int state;
/* In INIT state, Wait Inbound Q to initialize (in i2o_status_get) */
/* In READY state, Get status */
rc = i2o_status_get(c);
if (rc) {
osm_info("%s: Unable to obtain status, attempting a reset.\n",
c->name);
rc = i2o_iop_reset(c);
if (rc)
return rc;
}
if (sb->i2o_version > I2OVER15) {
osm_err("%s: Not running version 1.5 of the I2O Specification."
"\n", c->name);
return -ENODEV;
}
switch (sb->iop_state) {
case ADAPTER_STATE_FAULTED:
osm_err("%s: hardware fault\n", c->name);
return -EFAULT;
case ADAPTER_STATE_READY:
case ADAPTER_STATE_OPERATIONAL:
case ADAPTER_STATE_HOLD:
case ADAPTER_STATE_FAILED:
osm_debug("%s: already running, trying to reset...\n", c->name);
rc = i2o_iop_reset(c);
if (rc)
return rc;
}
/* preserve state */
state = sb->iop_state;
rc = i2o_iop_init_outbound_queue(c);
if (rc)
return rc;
/* if adapter was not in RESET state clear now */
if (state != ADAPTER_STATE_RESET)
i2o_iop_clear(c);
i2o_status_get(c);
if (sb->iop_state != ADAPTER_STATE_HOLD) {
osm_err("%s: failed to bring IOP into HOLD state\n", c->name);
return -EIO;
}
return i2o_hrt_get(c);
};
/**
* i2o_iop_systab_set - Set the I2O System Table of the specified IOP
* @c: I2O controller to which the system table should be send
*
* Before the systab could be set i2o_systab_build() must be called.
*
* Returns 0 on success or negative error code on failure.
*/
static int i2o_iop_systab_set(struct i2o_controller *c)
{
struct i2o_message *msg;
i2o_status_block *sb = c->status_block.virt;
struct device *dev = &c->pdev->dev;
struct resource *root;
int rc;
if (sb->current_mem_size < sb->desired_mem_size) {
struct resource *res = &c->mem_resource;
res->name = c->pdev->bus->name;
res->flags = IORESOURCE_MEM;
res->start = 0;
res->end = 0;
osm_info("%s: requires private memory resources.\n", c->name);
root = pci_find_parent_resource(c->pdev, res);
if (root == NULL)
osm_warn("%s: Can't find parent resource!\n", c->name);
if (root && allocate_resource(root, res, sb->desired_mem_size, sb->desired_mem_size, sb->desired_mem_size, 1 << 20, /* Unspecified, so use 1Mb and play safe */
NULL, NULL) >= 0) {
c->mem_alloc = 1;
sb->current_mem_size = resource_size(res);
sb->current_mem_base = res->start;
osm_info("%s: allocated %llu bytes of PCI memory at "
"0x%016llX.\n", c->name,
(unsigned long long)resource_size(res),
(unsigned long long)res->start);
}
}
if (sb->current_io_size < sb->desired_io_size) {
struct resource *res = &c->io_resource;
res->name = c->pdev->bus->name;
res->flags = IORESOURCE_IO;
res->start = 0;
res->end = 0;
osm_info("%s: requires private memory resources.\n", c->name);
root = pci_find_parent_resource(c->pdev, res);
if (root == NULL)
osm_warn("%s: Can't find parent resource!\n", c->name);
if (root && allocate_resource(root, res, sb->desired_io_size, sb->desired_io_size, sb->desired_io_size, 1 << 20, /* Unspecified, so use 1Mb and play safe */
NULL, NULL) >= 0) {
c->io_alloc = 1;
sb->current_io_size = resource_size(res);
sb->current_mem_base = res->start;
osm_info("%s: allocated %llu bytes of PCI I/O at "
"0x%016llX.\n", c->name,
(unsigned long long)resource_size(res),
(unsigned long long)res->start);
}
}
msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
if (IS_ERR(msg))
return PTR_ERR(msg);
i2o_systab.phys = dma_map_single(dev, i2o_systab.virt, i2o_systab.len,
PCI_DMA_TODEVICE);
if (!i2o_systab.phys) {
i2o_msg_nop(c, msg);
return -ENOMEM;
}
msg->u.head[0] = cpu_to_le32(I2O_MESSAGE_SIZE(12) | SGL_OFFSET_6);
msg->u.head[1] =
cpu_to_le32(I2O_CMD_SYS_TAB_SET << 24 | HOST_TID << 12 |
ADAPTER_TID);
/*
* Provide three SGL-elements:
* System table (SysTab), Private memory space declaration and
* Private i/o space declaration
*/
msg->body[0] = cpu_to_le32(c->unit + 2);
msg->body[1] = cpu_to_le32(0x00000000);
msg->body[2] = cpu_to_le32(0x54000000 | i2o_systab.len);
msg->body[3] = cpu_to_le32(i2o_systab.phys);
msg->body[4] = cpu_to_le32(0x54000000 | sb->current_mem_size);
msg->body[5] = cpu_to_le32(sb->current_mem_base);
msg->body[6] = cpu_to_le32(0xd4000000 | sb->current_io_size);
msg->body[6] = cpu_to_le32(sb->current_io_base);
rc = i2o_msg_post_wait(c, msg, 120);
dma_unmap_single(dev, i2o_systab.phys, i2o_systab.len,
PCI_DMA_TODEVICE);
if (rc < 0)
osm_err("%s: Unable to set SysTab (status=%#x).\n", c->name,
-rc);
else
osm_debug("%s: SysTab set.\n", c->name);
return rc;
}
/**
* i2o_iop_online - Bring a controller online into OPERATIONAL state.
* @c: I2O controller
*
* Send the system table and enable the I2O controller.
*
* Returns 0 on success or negative error code on failure.
*/
static int i2o_iop_online(struct i2o_controller *c)
{
int rc;
rc = i2o_iop_systab_set(c);
if (rc)
return rc;
/* In READY state */
osm_debug("%s: Attempting to enable...\n", c->name);
rc = i2o_iop_enable(c);
if (rc)
return rc;
return 0;
};
/**
* i2o_iop_remove - Remove the I2O controller from the I2O core
* @c: I2O controller
*
* Remove the I2O controller from the I2O core. If devices are attached to
* the controller remove these also and finally reset the controller.
*/
void i2o_iop_remove(struct i2o_controller *c)
{
struct i2o_device *dev, *tmp;
osm_debug("%s: deleting controller\n", c->name);
i2o_driver_notify_controller_remove_all(c);
list_del(&c->list);
list_for_each_entry_safe(dev, tmp, &c->devices, list)
i2o_device_remove(dev);
device_del(&c->device);
/* Ask the IOP to switch to RESET state */
i2o_iop_reset(c);
}
/**
* i2o_systab_build - Build system table
*
* The system table contains information about all the IOPs in the system
* (duh) and is used by the Executives on the IOPs to establish peer2peer
* connections. We're not supporting peer2peer at the moment, but this
* will be needed down the road for things like lan2lan forwarding.
*
* Returns 0 on success or negative error code on failure.
*/
static int i2o_systab_build(void)
{
struct i2o_controller *c, *tmp;
int num_controllers = 0;
u32 change_ind = 0;
int count = 0;
struct i2o_sys_tbl *systab = i2o_systab.virt;
list_for_each_entry_safe(c, tmp, &i2o_controllers, list)
num_controllers++;
if (systab) {
change_ind = systab->change_ind;
kfree(i2o_systab.virt);
}
/* Header + IOPs */
i2o_systab.len = sizeof(struct i2o_sys_tbl) + num_controllers *
sizeof(struct i2o_sys_tbl_entry);
systab = i2o_systab.virt = kzalloc(i2o_systab.len, GFP_KERNEL);
if (!systab) {
osm_err("unable to allocate memory for System Table\n");
return -ENOMEM;
}
systab->version = I2OVERSION;
systab->change_ind = change_ind + 1;
list_for_each_entry_safe(c, tmp, &i2o_controllers, list) {
i2o_status_block *sb;
if (count >= num_controllers) {
osm_err("controller added while building system table"
"\n");
break;
}
sb = c->status_block.virt;
/*
* Get updated IOP state so we have the latest information
*
* We should delete the controller at this point if it
* doesn't respond since if it's not on the system table
* it is techninically not part of the I2O subsystem...
*/
if (unlikely(i2o_status_get(c))) {
osm_err("%s: Deleting b/c could not get status while "
"attempting to build system table\n", c->name);
i2o_iop_remove(c);
continue; // try the next one
}
systab->iops[count].org_id = sb->org_id;
systab->iops[count].iop_id = c->unit + 2;
systab->iops[count].seg_num = 0;
systab->iops[count].i2o_version = sb->i2o_version;
systab->iops[count].iop_state = sb->iop_state;
systab->iops[count].msg_type = sb->msg_type;
systab->iops[count].frame_size = sb->inbound_frame_size;
systab->iops[count].last_changed = change_ind;
systab->iops[count].iop_capabilities = sb->iop_capabilities;
systab->iops[count].inbound_low =
i2o_dma_low(c->base.phys + I2O_IN_PORT);
systab->iops[count].inbound_high =
i2o_dma_high(c->base.phys + I2O_IN_PORT);
count++;
}
systab->num_entries = count;
return 0;
};
/**
* i2o_parse_hrt - Parse the hardware resource table.
* @c: I2O controller
*
* We don't do anything with it except dumping it (in debug mode).
*
* Returns 0.
*/
static int i2o_parse_hrt(struct i2o_controller *c)
{
i2o_dump_hrt(c);
return 0;
};
/**
* i2o_status_get - Get the status block from the I2O controller
* @c: I2O controller
*
* Issue a status query on the controller. This updates the attached
* status block. The status block could then be accessed through
* c->status_block.
*
* Returns 0 on success or negative error code on failure.
*/
int i2o_status_get(struct i2o_controller *c)
{
struct i2o_message *msg;
volatile u8 *status_block;
unsigned long timeout;
status_block = (u8 *) c->status_block.virt;
memset(c->status_block.virt, 0, sizeof(i2o_status_block));
msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
if (IS_ERR(msg))
return PTR_ERR(msg);
msg->u.head[0] = cpu_to_le32(NINE_WORD_MSG_SIZE | SGL_OFFSET_0);
msg->u.head[1] =
cpu_to_le32(I2O_CMD_STATUS_GET << 24 | HOST_TID << 12 |
ADAPTER_TID);
msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context);
msg->u.s.tcntxt = cpu_to_le32(0x00000000);
msg->body[0] = cpu_to_le32(0x00000000);
msg->body[1] = cpu_to_le32(0x00000000);
msg->body[2] = cpu_to_le32(i2o_dma_low(c->status_block.phys));
msg->body[3] = cpu_to_le32(i2o_dma_high(c->status_block.phys));
msg->body[4] = cpu_to_le32(sizeof(i2o_status_block)); /* always 88 bytes */
i2o_msg_post(c, msg);
/* Wait for a reply */
timeout = jiffies + I2O_TIMEOUT_STATUS_GET * HZ;
while (status_block[87] != 0xFF) {
if (time_after(jiffies, timeout)) {
osm_err("%s: Get status timeout.\n", c->name);
return -ETIMEDOUT;
}
schedule_timeout_uninterruptible(1);
}
#ifdef DEBUG
i2o_debug_state(c);
#endif
return 0;
}
/*
* i2o_hrt_get - Get the Hardware Resource Table from the I2O controller
* @c: I2O controller from which the HRT should be fetched
*
* The HRT contains information about possible hidden devices but is
* mostly useless to us.
*
* Returns 0 on success or negative error code on failure.
*/
static int i2o_hrt_get(struct i2o_controller *c)
{
int rc;
int i;
i2o_hrt *hrt = c->hrt.virt;
u32 size = sizeof(i2o_hrt);
struct device *dev = &c->pdev->dev;
for (i = 0; i < I2O_HRT_GET_TRIES; i++) {
struct i2o_message *msg;
msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
if (IS_ERR(msg))
return PTR_ERR(msg);
msg->u.head[0] = cpu_to_le32(SIX_WORD_MSG_SIZE | SGL_OFFSET_4);
msg->u.head[1] =
cpu_to_le32(I2O_CMD_HRT_GET << 24 | HOST_TID << 12 |
ADAPTER_TID);
msg->body[0] = cpu_to_le32(0xd0000000 | c->hrt.len);
msg->body[1] = cpu_to_le32(c->hrt.phys);
rc = i2o_msg_post_wait_mem(c, msg, 20, &c->hrt);
if (rc < 0) {
osm_err("%s: Unable to get HRT (status=%#x)\n", c->name,
-rc);
return rc;
}
size = hrt->num_entries * hrt->entry_len << 2;
if (size > c->hrt.len) {
if (i2o_dma_realloc(dev, &c->hrt, size))
return -ENOMEM;
else
hrt = c->hrt.virt;
} else
return i2o_parse_hrt(c);
}
osm_err("%s: Unable to get HRT after %d tries, giving up\n", c->name,
I2O_HRT_GET_TRIES);
return -EBUSY;
}
/**
* i2o_iop_release - release the memory for a I2O controller
* @dev: I2O controller which should be released
*
* Release the allocated memory. This function is called if refcount of
* device reaches 0 automatically.
*/
static void i2o_iop_release(struct device *dev)
{
struct i2o_controller *c = to_i2o_controller(dev);
i2o_iop_free(c);
};
/**
* i2o_iop_alloc - Allocate and initialize a i2o_controller struct
*
* Allocate the necessary memory for a i2o_controller struct and
* initialize the lists and message mempool.
*
* Returns a pointer to the I2O controller or a negative error code on
* failure.
*/
struct i2o_controller *i2o_iop_alloc(void)
{
static int unit = 0; /* 0 and 1 are NULL IOP and Local Host */
struct i2o_controller *c;
char poolname[32];
c = kzalloc(sizeof(*c), GFP_KERNEL);
if (!c) {
osm_err("i2o: Insufficient memory to allocate a I2O controller."
"\n");
return ERR_PTR(-ENOMEM);
}
c->unit = unit++;
sprintf(c->name, "iop%d", c->unit);
snprintf(poolname, sizeof(poolname), "i2o_%s_msg_inpool", c->name);
if (i2o_pool_alloc
(&c->in_msg, poolname, I2O_INBOUND_MSG_FRAME_SIZE * 4 + sizeof(u32),
I2O_MSG_INPOOL_MIN)) {
kfree(c);
return ERR_PTR(-ENOMEM);
};
INIT_LIST_HEAD(&c->devices);
spin_lock_init(&c->lock);
mutex_init(&c->lct_lock);
device_initialize(&c->device);
c->device.release = &i2o_iop_release;
dev_set_name(&c->device, "iop%d", c->unit);
#if BITS_PER_LONG == 64
spin_lock_init(&c->context_list_lock);
atomic_set(&c->context_list_counter, 0);
INIT_LIST_HEAD(&c->context_list);
#endif
return c;
};
/**
* i2o_iop_add - Initialize the I2O controller and add him to the I2O core
* @c: controller
*
* Initialize the I2O controller and if no error occurs add him to the I2O
* core.
*
* Returns 0 on success or negative error code on failure.
*/
int i2o_iop_add(struct i2o_controller *c)
{
int rc;
if ((rc = device_add(&c->device))) {
osm_err("%s: could not add controller\n", c->name);
goto iop_reset;
}
osm_info("%s: Activating I2O controller...\n", c->name);
osm_info("%s: This may take a few minutes if there are many devices\n",
c->name);
if ((rc = i2o_iop_activate(c))) {
osm_err("%s: could not activate controller\n", c->name);
goto device_del;
}
osm_debug("%s: building sys table...\n", c->name);
if ((rc = i2o_systab_build()))
goto device_del;
osm_debug("%s: online controller...\n", c->name);
if ((rc = i2o_iop_online(c)))
goto device_del;
osm_debug("%s: getting LCT...\n", c->name);
if ((rc = i2o_exec_lct_get(c)))
goto device_del;
list_add(&c->list, &i2o_controllers);
i2o_driver_notify_controller_add_all(c);
osm_info("%s: Controller added\n", c->name);
return 0;
device_del:
device_del(&c->device);
iop_reset:
i2o_iop_reset(c);
return rc;
};
/**
* i2o_event_register - Turn on/off event notification for a I2O device
* @dev: I2O device which should receive the event registration request
* @drv: driver which want to get notified
* @tcntxt: transaction context to use with this notifier
* @evt_mask: mask of events
*
* Create and posts an event registration message to the task. No reply
* is waited for, or expected. If you do not want further notifications,
* call the i2o_event_register again with a evt_mask of 0.
*
* Returns 0 on success or negative error code on failure.
*/
int i2o_event_register(struct i2o_device *dev, struct i2o_driver *drv,
int tcntxt, u32 evt_mask)
{
struct i2o_controller *c = dev->iop;
struct i2o_message *msg;
msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
if (IS_ERR(msg))
return PTR_ERR(msg);
msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0);
msg->u.head[1] =
cpu_to_le32(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | dev->
lct_data.tid);
msg->u.s.icntxt = cpu_to_le32(drv->context);
msg->u.s.tcntxt = cpu_to_le32(tcntxt);
msg->body[0] = cpu_to_le32(evt_mask);
i2o_msg_post(c, msg);
return 0;
};
/**
* i2o_iop_init - I2O main initialization function
*
* Initialize the I2O drivers (OSM) functions, register the Executive OSM,
* initialize the I2O PCI part and finally initialize I2O device stuff.
*
* Returns 0 on success or negative error code on failure.
*/
static int __init i2o_iop_init(void)
{
int rc = 0;
printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");
if ((rc = i2o_driver_init()))
goto exit;
if ((rc = i2o_exec_init()))
goto driver_exit;
if ((rc = i2o_pci_init()))
goto exec_exit;
return 0;
exec_exit:
i2o_exec_exit();
driver_exit:
i2o_driver_exit();
exit:
return rc;
}
/**
* i2o_iop_exit - I2O main exit function
*
* Removes I2O controllers from PCI subsystem and shut down OSMs.
*/
static void __exit i2o_iop_exit(void)
{
i2o_pci_exit();
i2o_exec_exit();
i2o_driver_exit();
};
module_init(i2o_iop_init);
module_exit(i2o_iop_exit);
MODULE_AUTHOR("Red Hat Software");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(OSM_DESCRIPTION);
MODULE_VERSION(OSM_VERSION);
#if BITS_PER_LONG == 64
EXPORT_SYMBOL(i2o_cntxt_list_add);
EXPORT_SYMBOL(i2o_cntxt_list_get);
EXPORT_SYMBOL(i2o_cntxt_list_remove);
EXPORT_SYMBOL(i2o_cntxt_list_get_ptr);
#endif
EXPORT_SYMBOL(i2o_msg_get_wait);
EXPORT_SYMBOL(i2o_find_iop);
EXPORT_SYMBOL(i2o_iop_find_device);
EXPORT_SYMBOL(i2o_event_register);
EXPORT_SYMBOL(i2o_status_get);
EXPORT_SYMBOL(i2o_controllers);