M7350/kernel/arch/arm/mach-msm/board-8064-bt.c

558 lines
13 KiB
C
Raw Normal View History

2024-09-09 08:52:07 +00:00
/* Copyright (c) 2011-2013, Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/delay.h>
#include <linux/rfkill.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/mfd/marimba.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <mach/rpc_pmapp.h>
#include <mach/msm_xo.h>
#include <mach/socinfo.h>
#include "board-8064.h"
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
#define BAHAMA_SLAVE_ID_FM_ADDR 0x2A
#define BAHAMA_SLAVE_ID_QMEMBIST_ADDR 0x7B
struct bt_vreg_info {
const char *name;
unsigned int pmapp_id;
unsigned int min_level;
unsigned int max_level;
unsigned int is_pin_controlled;
struct regulator *reg;
};
struct bahama_config_register {
u8 reg;
u8 value;
u8 mask;
};
static struct bt_vreg_info bt_vregs[] = {
{"bha_vddxo", 2, 1800000, 1800000, 0, NULL},
{"bha_vddpx", 21, 1800000, 1800000, 0, NULL},
{"bha_vddpa", 21, 2900000, 3300000, 0, NULL}
};
static struct msm_xo_voter *bt_clock;
static struct platform_device msm_bt_power_device = {
.name = "bt_power",
.id = -1,
};
static unsigned bt_config_pcm_on[] = {
/*PCM_DOUT*/
GPIO_CFG(43, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
/*PCM_DIN*/
GPIO_CFG(44, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
/*PCM_SYNC*/
GPIO_CFG(45, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
/*PCM_CLK*/
GPIO_CFG(46, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
};
static unsigned bt_config_pcm_off[] = {
/*PCM_DOUT*/
GPIO_CFG(43, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
/*PCM_DIN*/
GPIO_CFG(44, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
/*PCM_SYNC*/
GPIO_CFG(45, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
/*PCM_CLK*/
GPIO_CFG(46, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
};
static int config_pcm(int mode)
{
int pin, rc = 0;
if (mode == BT_PCM_ON) {
pr_err("%s mode =BT_PCM_ON", __func__);
for (pin = 0; pin < ARRAY_SIZE(bt_config_pcm_on);
pin++) {
rc = gpio_tlmm_config(bt_config_pcm_on[pin],
GPIO_CFG_ENABLE);
if (rc < 0)
return rc;
}
} else if (mode == BT_PCM_OFF) {
pr_err("%s mode =BT_PCM_OFF", __func__);
for (pin = 0; pin < ARRAY_SIZE(bt_config_pcm_off);
pin++) {
rc = gpio_tlmm_config(bt_config_pcm_off[pin],
GPIO_CFG_ENABLE);
if (rc < 0)
return rc;
}
}
return rc;
}
static int bahama_bt(int on)
{
int rc = 0;
int i;
struct marimba config = { .mod_id = SLAVE_ID_BAHAMA};
struct bahama_variant_register {
const size_t size;
const struct bahama_config_register *set;
};
const struct bahama_config_register *p;
int version;
const struct bahama_config_register v10_bt_on[] = {
{ 0xE9, 0x00, 0xFF },
{ 0xF4, 0x80, 0xFF },
{ 0xE4, 0x00, 0xFF },
{ 0xE5, 0x00, 0x0F },
#ifdef CONFIG_WLAN
{ 0xE6, 0x38, 0x7F },
{ 0xE7, 0x06, 0xFF },
#endif
{ 0xE9, 0x21, 0xFF },
{ 0x01, 0x0C, 0x1F },
{ 0x01, 0x08, 0x1F },
};
const struct bahama_config_register v20_bt_on_fm_off[] = {
{ 0x11, 0x0C, 0xFF },
{ 0x13, 0x01, 0xFF },
{ 0xF4, 0x80, 0xFF },
{ 0xF0, 0x00, 0xFF },
{ 0xE9, 0x00, 0xFF },
#ifdef CONFIG_WLAN
{ 0x81, 0x00, 0x7F },
{ 0x82, 0x00, 0xFF },
{ 0xE6, 0x38, 0x7F },
{ 0xE7, 0x06, 0xFF },
#endif
{ 0x8E, 0x15, 0xFF },
{ 0x8F, 0x15, 0xFF },
{ 0x90, 0x15, 0xFF },
{ 0xE9, 0x21, 0xFF },
};
const struct bahama_config_register v20_bt_on_fm_on[] = {
{ 0x11, 0x0C, 0xFF },
{ 0x13, 0x01, 0xFF },
{ 0xF4, 0x86, 0xFF },
{ 0xF0, 0x06, 0xFF },
{ 0xE9, 0x00, 0xFF },
#ifdef CONFIG_WLAN
{ 0x81, 0x00, 0x7F },
{ 0x82, 0x00, 0xFF },
{ 0xE6, 0x38, 0x7F },
{ 0xE7, 0x06, 0xFF },
#endif
{ 0xE9, 0x21, 0xFF },
};
const struct bahama_config_register v10_bt_off[] = {
{ 0xE9, 0x00, 0xFF },
};
const struct bahama_config_register v20_bt_off_fm_off[] = {
{ 0xF4, 0x84, 0xFF },
{ 0xF0, 0x04, 0xFF },
{ 0xE9, 0x00, 0xFF }
};
const struct bahama_config_register v20_bt_off_fm_on[] = {
{ 0xF4, 0x86, 0xFF },
{ 0xF0, 0x06, 0xFF },
{ 0xE9, 0x00, 0xFF }
};
const struct bahama_variant_register bt_bahama[2][3] = {
{
{ ARRAY_SIZE(v10_bt_off), v10_bt_off },
{ ARRAY_SIZE(v20_bt_off_fm_off), v20_bt_off_fm_off },
{ ARRAY_SIZE(v20_bt_off_fm_on), v20_bt_off_fm_on }
},
{
{ ARRAY_SIZE(v10_bt_on), v10_bt_on },
{ ARRAY_SIZE(v20_bt_on_fm_off), v20_bt_on_fm_off },
{ ARRAY_SIZE(v20_bt_on_fm_on), v20_bt_on_fm_on }
}
};
u8 offset = 0; /* index into bahama configs */
on = on ? 1 : 0;
version = marimba_read_bahama_ver(&config);
if (version < 0 || version == BAHAMA_VER_UNSUPPORTED) {
dev_err(&msm_bt_power_device.dev,
"%s : Bahama version read Error, version = %d\n",
__func__, version);
return -EIO;
}
if (version == BAHAMA_VER_2_0) {
if (marimba_get_fm_status(&config))
offset = 0x01;
}
p = bt_bahama[on][version + offset].set;
dev_dbg(&msm_bt_power_device.dev,
"%s: found version %d\n", __func__, version);
for (i = 0; i < bt_bahama[on][version + offset].size; i++) {
u8 value = (p+i)->value;
rc = marimba_write_bit_mask(&config,
(p+i)->reg,
&value,
sizeof((p+i)->value),
(p+i)->mask);
if (rc < 0) {
dev_err(&msm_bt_power_device.dev,
"%s: reg %x write failed: %d\n",
__func__, (p+i)->reg, rc);
return rc;
}
dev_dbg(&msm_bt_power_device.dev,
"%s: reg 0x%02x write value 0x%02x mask 0x%02x\n",
__func__, (p+i)->reg,
value, (p+i)->mask);
value = 0;
if (marimba_read_bit_mask(&config,
(p+i)->reg, &value,
sizeof((p+i)->value), (p+i)->mask) < 0)
dev_err(&msm_bt_power_device.dev,
"%s marimba_read_bit_mask- error",
__func__);
dev_dbg(&msm_bt_power_device.dev,
"%s: reg 0x%02x read value 0x%02x mask 0x%02x\n",
__func__, (p+i)->reg,
value, (p+i)->mask);
}
/* Update BT Status */
if (on)
marimba_set_bt_status(&config, true);
else
marimba_set_bt_status(&config, false);
return rc;
}
static int bluetooth_switch_regulators(int on)
{
int i, rc = 0;
for (i = 0; i < ARRAY_SIZE(bt_vregs); i++) {
if (IS_ERR_OR_NULL(bt_vregs[i].reg)) {
bt_vregs[i].reg =
regulator_get(&msm_bt_power_device.dev,
bt_vregs[i].name);
if (IS_ERR(bt_vregs[i].reg)) {
rc = PTR_ERR(bt_vregs[i].reg);
dev_err(&msm_bt_power_device.dev,
"%s: invalid regulator handle for %s: %d\n",
__func__, bt_vregs[i].name, rc);
goto reg_disable;
}
}
rc = on ? regulator_set_voltage(bt_vregs[i].reg,
bt_vregs[i].min_level,
bt_vregs[i].max_level) : 0;
if (rc) {
dev_err(&msm_bt_power_device.dev,
"%s: could not set voltage for %s: %d\n",
__func__, bt_vregs[i].name, rc);
goto reg_disable;
}
rc = on ? regulator_enable(bt_vregs[i].reg) : 0;
if (rc) {
dev_err(&msm_bt_power_device.dev,
"%s: could not %sable regulator %s: %d\n",
__func__, "en", bt_vregs[i].name, rc);
goto reg_disable;
}
rc = on ? 0 : regulator_disable(bt_vregs[i].reg);
if (rc) {
dev_err(&msm_bt_power_device.dev,
"%s: could not %sable regulator %s: %d\n",
__func__, "dis", bt_vregs[i].name, rc);
}
}
return rc;
reg_disable:
pr_err("bluetooth_switch_regulators - FAIL!!!!\n");
if (on) {
while (i) {
i--;
regulator_disable(bt_vregs[i].reg);
regulator_put(bt_vregs[i].reg);
bt_vregs[i].reg = NULL;
}
}
return rc;
}
static unsigned int msm_bahama_setup_power(void)
{
int rc = 0;
int i;
for (i = 0; i < ARRAY_SIZE(bt_vregs); i++) {
bt_vregs[i].reg = regulator_get(&msm_bt_power_device.dev,
bt_vregs[i].name);
if (IS_ERR(bt_vregs[i].reg)) {
rc = PTR_ERR(bt_vregs[i].reg);
pr_err("%s: could not get regulator %s: %d\n",
__func__, bt_vregs[i].name, rc);
goto reg_fail;
}
rc = regulator_set_voltage(bt_vregs[i].reg,
bt_vregs[i].min_level,
bt_vregs[i].max_level);
if (rc) {
pr_err("%s: could not set voltage for %s: %d\n",
__func__, bt_vregs[i].name, rc);
goto reg_fail;
}
rc = regulator_enable(bt_vregs[i].reg);
if (rc) {
pr_err("%s: could not enable regulator %s: %d\n",
__func__, bt_vregs[i].name, rc);
goto reg_fail;
}
}
return rc;
reg_fail:
pr_err("msm_bahama_setup_power FAILED !!!\n");
while (i) {
i--;
regulator_disable(bt_vregs[i].reg);
regulator_put(bt_vregs[i].reg);
bt_vregs[i].reg = NULL;
}
return rc;
}
static unsigned int msm_bahama_shutdown_power(int value)
{
int rc = 0;
int i;
for (i = 0; i < ARRAY_SIZE(bt_vregs); i++) {
rc = regulator_disable(bt_vregs[i].reg);
if (rc < 0) {
pr_err("%s: could not disable regulator %s: %d\n",
__func__, bt_vregs[i].name, rc);
goto out;
}
regulator_put(bt_vregs[i].reg);
bt_vregs[i].reg = NULL;
}
out:
return rc;
}
static unsigned int msm_bahama_core_config(int type)
{
int rc = 0;
if (type == BAHAMA_ID) {
int i;
struct marimba config = { .mod_id = SLAVE_ID_BAHAMA};
const struct bahama_config_register v20_init[] = {
/* reg, value, mask */
{ 0xF4, 0x84, 0xFF }, /* AREG */
{ 0xF0, 0x04, 0xFF } /* DREG */
};
if (marimba_read_bahama_ver(&config) == BAHAMA_VER_2_0) {
for (i = 0; i < ARRAY_SIZE(v20_init); i++) {
u8 value = v20_init[i].value;
rc = marimba_write_bit_mask(&config,
v20_init[i].reg,
&value,
sizeof(v20_init[i].value),
v20_init[i].mask);
if (rc < 0) {
pr_err("%s: reg %d write failed: %d\n",
__func__, v20_init[i].reg, rc);
return rc;
}
pr_debug("%s: reg 0x%02x value 0x%02x mask 0x%02x\n",
__func__, v20_init[i].reg,
v20_init[i].value, v20_init[i].mask);
}
}
}
pr_debug("core type: %d\n", type);
return rc;
}
static int bluetooth_power(int on)
{
int rc = 0;
const char *id = "BTPW";
int cid = 0;
int bt_state = 0;
struct marimba config = { .mod_id = SLAVE_ID_BAHAMA};
cid = adie_get_detected_connectivity_type();
if (cid != BAHAMA_ID) {
pr_err("%s: unexpected adie connectivity type: %d\n",
__func__, cid);
return -ENODEV;
}
if (on) {
pr_debug("%s: Powering up the BT module.\n", __func__);
rc = bluetooth_switch_regulators(on);
if (rc < 0) {
pr_err("%s: bluetooth_switch_regulators rc = %d",
__func__, rc);
goto exit;
}
/* UART GPIO configuration to be done by by UART module*/
/*Setup BT clocks*/
pr_debug("%s: Voting for the 19.2MHz clock\n", __func__);
bt_clock = msm_xo_get(MSM_XO_TCXO_A2, id);
if (IS_ERR(bt_clock)) {
rc = PTR_ERR(bt_clock);
pr_err("%s: failed to get the handle for A2(%d)\n",
__func__, rc);
goto fail_power;
}
rc = msm_xo_mode_vote(bt_clock, MSM_XO_MODE_ON);
if (rc < 0) {
pr_err("%s: Failed to vote for TCXO_A2 ON\n", __func__);
goto fail_xo_vote;
}
msleep(20);
/*I2C config for Bahama*/
pr_debug("%s: BT Turn On sequence in-progress.\n", __func__);
rc = bahama_bt(1);
if (rc < 0) {
pr_err("%s: bahama_bt rc = %d", __func__, rc);
goto fail_xo_vote;
}
msleep(20);
/*setup BT PCM lines*/
pr_debug("%s: Configuring PCM lines.\n", __func__);
rc = config_pcm(BT_PCM_ON);
if (rc < 0) {
pr_err("%s: config_pcm , rc = %d\n",
__func__, rc);
goto fail_i2c;
}
pr_debug("%s: BT Turn On complete.\n", __func__);
/* TO DO - Enable PIN CTRL */
/*
rc = msm_xo_mode_vote(bt_clock, MSM_XO_MODE_PIN_CTRL);
if (rc < 0) {
pr_err("%s: Failed to vote for TCXO_A2 in PIN_CTRL\n",
__func__);
goto fail_xo_vote;
} */
} else {
pr_debug("%s: Turning BT Off.\n", __func__);
bt_state = marimba_get_bt_status(&config);
if (!bt_state) {
pr_err("%s: BT is already turned OFF.\n", __func__);
return 0;
}
rc = config_pcm(BT_PCM_OFF);
if (rc < 0) {
pr_err("%s: msm_bahama_setup_pcm_i2s, rc =%d\n",
__func__, rc);
}
fail_i2c:
rc = bahama_bt(0);
if (rc < 0)
pr_err("%s: bahama_bt rc = %d", __func__, rc);
fail_xo_vote:
pr_debug("%s: Voting off the 19.2MHz clk\n", __func__);
msm_xo_put(bt_clock);
fail_power:
pr_debug("%s: Switching off voltage regulators.\n", __func__);
rc = bluetooth_switch_regulators(0);
if (rc < 0) {
pr_err("%s: switch_regulators : rc = %d",\
__func__, rc);
goto exit;
}
pr_debug("%s: BT Power Off complete.\n", __func__);
}
return rc;
exit:
pr_err("%s: failed with rc = %d", __func__, rc);
return rc;
}
static struct marimba_platform_data marimba_pdata = {
.slave_id[SLAVE_ID_BAHAMA_FM] = BAHAMA_SLAVE_ID_FM_ADDR,
.slave_id[SLAVE_ID_BAHAMA_QMEMBIST] = BAHAMA_SLAVE_ID_QMEMBIST_ADDR,
.bahama_setup = msm_bahama_setup_power,
.bahama_shutdown = msm_bahama_shutdown_power,
.bahama_core_config = msm_bahama_core_config,
.fm = NULL,
};
static struct i2c_board_info bahama_devices[] = {
{
I2C_BOARD_INFO("marimba", 0xc),
.platform_data = &marimba_pdata,
},
};
void __init apq8064_bt_power_init(void)
{
int rc = 0;
struct device *dev;
rc = i2c_register_board_info(APQ_8064_GSBI5_QUP_I2C_BUS_ID,
bahama_devices,
ARRAY_SIZE(bahama_devices));
if (rc < 0) {
pr_err("%s: I2C Register failed\n", __func__);
return;
}
rc = platform_device_register(&msm_bt_power_device);
if (rc < 0) {
pr_err("%s: device register failed\n", __func__);
platform_device_unregister(&msm_bt_power_device);
return;
}
dev = &msm_bt_power_device.dev;
dev->platform_data = &bluetooth_power;
return;
}
#endif