88 lines
3.2 KiB
Plaintext
88 lines
3.2 KiB
Plaintext
|
Qualcomm Internet Packet Accelerator
|
||
|
|
|
||
|
|
Internet Packet Accelerator (IPA) is a programmable protocol
|
||
|
|
processor HW block. It is designed to support generic HW processing
|
||
|
|
of UL/DL IP packets for various use cases independent of radio technology.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
|
||
|
|
IPA node:
|
||
|
|
|
||
|
|
- compatible : "qcom,ipa"
|
||
|
|
- reg: Specifies the base physical addresses and the sizes of the IPA
|
||
|
|
registers.
|
||
|
|
- reg-names: "ipa-base" - string to identify the IPA CORE base registers.
|
||
|
|
"bam-base" - string to identify the IPA BAM base registers.
|
||
|
|
"a2-bam-base" - string to identify the A2 BAM base registers.
|
||
|
|
- interrupts: Specifies the interrupt associated with IPA.
|
||
|
|
- interrupt-names: "ipa-irq" - string to identify the IPA core interrupt.
|
||
|
|
"bam-irq" - string to identify the IPA BAM interrupt.
|
||
|
|
"a2-bam-irq" - string to identify the A2 BAM interrupt.
|
||
|
|
- qcom,ipa-hw-ver: Specifies the IPA hardware version.
|
||
|
|
|
||
|
|
IPA pipe sub nodes (A2 static pipes configurations):
|
||
|
|
|
||
|
|
-label: two labels are supported, a2-to-ipa and ipa-to-a2 which
|
||
|
|
supply static configuration for A2-IPA connection.
|
||
|
|
-qcom,src-bam-physical-address: The physical address of the source BAM
|
||
|
|
-qcom,ipa-bam-mem-type:The memory type:
|
||
|
|
0(Pipe memory), 1(Private memory), 2(System memory)
|
||
|
|
-qcom,src-bam-pipe-index: Source pipe index
|
||
|
|
-qcom,dst-bam-physical-address: The physical address of the
|
||
|
|
destination BAM
|
||
|
|
-qcom,dst-bam-pipe-index: Destination pipe index
|
||
|
|
-qcom,data-fifo-offset: Data fifo base offset
|
||
|
|
-qcom,data-fifo-size: Data fifo size (bytes)
|
||
|
|
-qcom,descriptor-fifo-offset: Descriptor fifo base offset
|
||
|
|
-qcom,descriptor-fifo-size: Descriptor fifo size (bytes)
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
-qcom,ipa-pipe-mem: Specifies the base physical address and the
|
||
|
|
size of the IPA pipe memory region.
|
||
|
|
Pipe memory is a feature which may be supported by the
|
||
|
|
target (HW platform). The Driver support using pipe
|
||
|
|
memory instead of system memory. In case this property
|
||
|
|
will not appear in the IPA DTS entry, the driver will
|
||
|
|
use system memory.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
qcom,ipa@fd4c0000 {
|
||
|
|
compatible = "qcom,ipa";
|
||
|
|
reg = <0xfd4c0000 0x26000>,
|
||
|
|
<0xfd4c4000 0x14818>;
|
||
|
|
<0xfc834000 0x7000>;
|
||
|
|
reg-names = "ipa-base", "bam-base"; "a2-bam-base";
|
||
|
|
interrupts = <0 252 0>,
|
||
|
|
<0 253 0>;
|
||
|
|
<0 29 1>;
|
||
|
|
interrupt-names = "ipa-irq", "bam-irq"; "a2-bam-irq";
|
||
|
|
qcom,ipa-hw-ver = <1>;
|
||
|
|
|
||
|
|
qcom,pipe1 {
|
||
|
|
label = "a2-to-ipa";
|
||
|
|
qcom,src-bam-physical-address = <0xfc834000>;
|
||
|
|
qcom,ipa-bam-mem-type = <0>;
|
||
|
|
qcom,src-bam-pipe-index = <1>;
|
||
|
|
qcom,dst-bam-physical-address = <0xfd4c0000>;
|
||
|
|
qcom,dst-bam-pipe-index = <6>;
|
||
|
|
qcom,data-fifo-offset = <0x1000>;
|
||
|
|
qcom,data-fifo-size = <0xd00>;
|
||
|
|
qcom,descriptor-fifo-offset = <0x1d00>;
|
||
|
|
qcom,descriptor-fifo-size = <0x300>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qcom,pipe2 {
|
||
|
|
label = "ipa-to-a2";
|
||
|
|
qcom,src-bam-physical-address = <0xfd4c0000>;
|
||
|
|
qcom,ipa-bam-mem-type = <0>;
|
||
|
|
qcom,src-bam-pipe-index = <7>;
|
||
|
|
qcom,dst-bam-physical-address = <0xfc834000>;
|
||
|
|
qcom,dst-bam-pipe-index = <0>;
|
||
|
|
qcom,data-fifo-offset = <0x00>;
|
||
|
|
qcom,data-fifo-size = <0xd00>;
|
||
|
|
qcom,descriptor-fifo-offset = <0xd00>;
|
||
|
|
qcom,descriptor-fifo-size = <0x300>;
|
||
|
|
};
|
||
|
|
};
|