732 lines
24 KiB
C
732 lines
24 KiB
C
|
#ifndef __LINUX_FUSBH200_H
|
||
|
|
#define __LINUX_FUSBH200_H
|
||
|
|
|
||
|
|
/* definitions used for the EHCI driver */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
|
||
|
|
* __leXX (normally) or __beXX (given FUSBH200_BIG_ENDIAN_DESC), depending on
|
||
|
|
* the host controller implementation.
|
||
|
|
*
|
||
|
|
* To facilitate the strongest possible byte-order checking from "sparse"
|
||
|
|
* and so on, we use __leXX unless that's not practical.
|
||
|
|
*/
|
||
|
|
#define __hc32 __le32
|
||
|
|
#define __hc16 __le16
|
||
|
|
|
||
|
|
/* statistics can be kept for tuning/monitoring */
|
||
|
|
struct fusbh200_stats {
|
||
|
|
/* irq usage */
|
||
|
|
unsigned long normal;
|
||
|
|
unsigned long error;
|
||
|
|
unsigned long iaa;
|
||
|
|
unsigned long lost_iaa;
|
||
|
|
|
||
|
|
/* termination of urbs from core */
|
||
|
|
unsigned long complete;
|
||
|
|
unsigned long unlink;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* fusbh200_hcd->lock guards shared data against other CPUs:
|
||
|
|
* fusbh200_hcd: async, unlink, periodic (and shadow), ...
|
||
|
|
* usb_host_endpoint: hcpriv
|
||
|
|
* fusbh200_qh: qh_next, qtd_list
|
||
|
|
* fusbh200_qtd: qtd_list
|
||
|
|
*
|
||
|
|
* Also, hold this lock when talking to HC registers or
|
||
|
|
* when updating hw_* fields in shared qh/qtd/... structures.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define FUSBH200_MAX_ROOT_PORTS 1 /* see HCS_N_PORTS */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* fusbh200_rh_state values of FUSBH200_RH_RUNNING or above mean that the
|
||
|
|
* controller may be doing DMA. Lower values mean there's no DMA.
|
||
|
|
*/
|
||
|
|
enum fusbh200_rh_state {
|
||
|
|
FUSBH200_RH_HALTED,
|
||
|
|
FUSBH200_RH_SUSPENDED,
|
||
|
|
FUSBH200_RH_RUNNING,
|
||
|
|
FUSBH200_RH_STOPPING
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Timer events, ordered by increasing delay length.
|
||
|
|
* Always update event_delays_ns[] and event_handlers[] (defined in
|
||
|
|
* ehci-timer.c) in parallel with this list.
|
||
|
|
*/
|
||
|
|
enum fusbh200_hrtimer_event {
|
||
|
|
FUSBH200_HRTIMER_POLL_ASS, /* Poll for async schedule off */
|
||
|
|
FUSBH200_HRTIMER_POLL_PSS, /* Poll for periodic schedule off */
|
||
|
|
FUSBH200_HRTIMER_POLL_DEAD, /* Wait for dead controller to stop */
|
||
|
|
FUSBH200_HRTIMER_UNLINK_INTR, /* Wait for interrupt QH unlink */
|
||
|
|
FUSBH200_HRTIMER_FREE_ITDS, /* Wait for unused iTDs and siTDs */
|
||
|
|
FUSBH200_HRTIMER_ASYNC_UNLINKS, /* Unlink empty async QHs */
|
||
|
|
FUSBH200_HRTIMER_IAA_WATCHDOG, /* Handle lost IAA interrupts */
|
||
|
|
FUSBH200_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */
|
||
|
|
FUSBH200_HRTIMER_DISABLE_ASYNC, /* Wait to disable async sched */
|
||
|
|
FUSBH200_HRTIMER_IO_WATCHDOG, /* Check for missing IRQs */
|
||
|
|
FUSBH200_HRTIMER_NUM_EVENTS /* Must come last */
|
||
|
|
};
|
||
|
|
#define FUSBH200_HRTIMER_NO_EVENT 99
|
||
|
|
|
||
|
|
struct fusbh200_hcd { /* one per controller */
|
||
|
|
/* timing support */
|
||
|
|
enum fusbh200_hrtimer_event next_hrtimer_event;
|
||
|
|
unsigned enabled_hrtimer_events;
|
||
|
|
ktime_t hr_timeouts[FUSBH200_HRTIMER_NUM_EVENTS];
|
||
|
|
struct hrtimer hrtimer;
|
||
|
|
|
||
|
|
int PSS_poll_count;
|
||
|
|
int ASS_poll_count;
|
||
|
|
int died_poll_count;
|
||
|
|
|
||
|
|
/* glue to PCI and HCD framework */
|
||
|
|
struct fusbh200_caps __iomem *caps;
|
||
|
|
struct fusbh200_regs __iomem *regs;
|
||
|
|
struct fusbh200_dbg_port __iomem *debug;
|
||
|
|
|
||
|
|
__u32 hcs_params; /* cached register copy */
|
||
|
|
spinlock_t lock;
|
||
|
|
enum fusbh200_rh_state rh_state;
|
||
|
|
|
||
|
|
/* general schedule support */
|
||
|
|
bool scanning:1;
|
||
|
|
bool need_rescan:1;
|
||
|
|
bool intr_unlinking:1;
|
||
|
|
bool async_unlinking:1;
|
||
|
|
bool shutdown:1;
|
||
|
|
struct fusbh200_qh *qh_scan_next;
|
||
|
|
|
||
|
|
/* async schedule support */
|
||
|
|
struct fusbh200_qh *async;
|
||
|
|
struct fusbh200_qh *dummy; /* For AMD quirk use */
|
||
|
|
struct fusbh200_qh *async_unlink;
|
||
|
|
struct fusbh200_qh *async_unlink_last;
|
||
|
|
struct fusbh200_qh *async_iaa;
|
||
|
|
unsigned async_unlink_cycle;
|
||
|
|
unsigned async_count; /* async activity count */
|
||
|
|
|
||
|
|
/* periodic schedule support */
|
||
|
|
#define DEFAULT_I_TDPS 1024 /* some HCs can do less */
|
||
|
|
unsigned periodic_size;
|
||
|
|
__hc32 *periodic; /* hw periodic table */
|
||
|
|
dma_addr_t periodic_dma;
|
||
|
|
struct list_head intr_qh_list;
|
||
|
|
unsigned i_thresh; /* uframes HC might cache */
|
||
|
|
|
||
|
|
union fusbh200_shadow *pshadow; /* mirror hw periodic table */
|
||
|
|
struct fusbh200_qh *intr_unlink;
|
||
|
|
struct fusbh200_qh *intr_unlink_last;
|
||
|
|
unsigned intr_unlink_cycle;
|
||
|
|
unsigned now_frame; /* frame from HC hardware */
|
||
|
|
unsigned next_frame; /* scan periodic, start here */
|
||
|
|
unsigned intr_count; /* intr activity count */
|
||
|
|
unsigned isoc_count; /* isoc activity count */
|
||
|
|
unsigned periodic_count; /* periodic activity count */
|
||
|
|
unsigned uframe_periodic_max; /* max periodic time per uframe */
|
||
|
|
|
||
|
|
|
||
|
|
/* list of itds completed while now_frame was still active */
|
||
|
|
struct list_head cached_itd_list;
|
||
|
|
struct fusbh200_itd *last_itd_to_free;
|
||
|
|
|
||
|
|
/* per root hub port */
|
||
|
|
unsigned long reset_done [FUSBH200_MAX_ROOT_PORTS];
|
||
|
|
|
||
|
|
/* bit vectors (one bit per port) */
|
||
|
|
unsigned long bus_suspended; /* which ports were
|
||
|
|
already suspended at the start of a bus suspend */
|
||
|
|
unsigned long companion_ports; /* which ports are
|
||
|
|
dedicated to the companion controller */
|
||
|
|
unsigned long owned_ports; /* which ports are
|
||
|
|
owned by the companion during a bus suspend */
|
||
|
|
unsigned long port_c_suspend; /* which ports have
|
||
|
|
the change-suspend feature turned on */
|
||
|
|
unsigned long suspended_ports; /* which ports are
|
||
|
|
suspended */
|
||
|
|
unsigned long resuming_ports; /* which ports have
|
||
|
|
started to resume */
|
||
|
|
|
||
|
|
/* per-HC memory pools (could be per-bus, but ...) */
|
||
|
|
struct dma_pool *qh_pool; /* qh per active urb */
|
||
|
|
struct dma_pool *qtd_pool; /* one or more per qh */
|
||
|
|
struct dma_pool *itd_pool; /* itd per iso urb */
|
||
|
|
|
||
|
|
unsigned random_frame;
|
||
|
|
unsigned long next_statechange;
|
||
|
|
ktime_t last_periodic_enable;
|
||
|
|
u32 command;
|
||
|
|
|
||
|
|
/* SILICON QUIRKS */
|
||
|
|
unsigned need_io_watchdog:1;
|
||
|
|
unsigned fs_i_thresh:1; /* Intel iso scheduling */
|
||
|
|
|
||
|
|
u8 sbrn; /* packed release number */
|
||
|
|
|
||
|
|
/* irq statistics */
|
||
|
|
struct fusbh200_stats stats;
|
||
|
|
# define COUNT(x) do { (x)++; } while (0)
|
||
|
|
|
||
|
|
/* debug files */
|
||
|
|
struct dentry *debug_dir;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* convert between an HCD pointer and the corresponding FUSBH200_HCD */
|
||
|
|
static inline struct fusbh200_hcd *hcd_to_fusbh200 (struct usb_hcd *hcd)
|
||
|
|
{
|
||
|
|
return (struct fusbh200_hcd *) (hcd->hcd_priv);
|
||
|
|
}
|
||
|
|
static inline struct usb_hcd *fusbh200_to_hcd (struct fusbh200_hcd *fusbh200)
|
||
|
|
{
|
||
|
|
return container_of ((void *) fusbh200, struct usb_hcd, hcd_priv);
|
||
|
|
}
|
||
|
|
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
|
||
|
|
|
||
|
|
/* Section 2.2 Host Controller Capability Registers */
|
||
|
|
struct fusbh200_caps {
|
||
|
|
/* these fields are specified as 8 and 16 bit registers,
|
||
|
|
* but some hosts can't perform 8 or 16 bit PCI accesses.
|
||
|
|
* some hosts treat caplength and hciversion as parts of a 32-bit
|
||
|
|
* register, others treat them as two separate registers, this
|
||
|
|
* affects the memory map for big endian controllers.
|
||
|
|
*/
|
||
|
|
u32 hc_capbase;
|
||
|
|
#define HC_LENGTH(fusbh200, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
|
||
|
|
(fusbh200_big_endian_capbase(fusbh200) ? 24 : 0)))
|
||
|
|
#define HC_VERSION(fusbh200, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \
|
||
|
|
(fusbh200_big_endian_capbase(fusbh200) ? 0 : 16)))
|
||
|
|
u32 hcs_params; /* HCSPARAMS - offset 0x4 */
|
||
|
|
#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
|
||
|
|
|
||
|
|
u32 hcc_params; /* HCCPARAMS - offset 0x8 */
|
||
|
|
#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
|
||
|
|
#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
|
||
|
|
u8 portroute[8]; /* nibbles for routing - offset 0xC */
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
/* Section 2.3 Host Controller Operational Registers */
|
||
|
|
struct fusbh200_regs {
|
||
|
|
|
||
|
|
/* USBCMD: offset 0x00 */
|
||
|
|
u32 command;
|
||
|
|
|
||
|
|
/* EHCI 1.1 addendum */
|
||
|
|
/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
|
||
|
|
#define CMD_PARK (1<<11) /* enable "park" on async qh */
|
||
|
|
#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
|
||
|
|
#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
|
||
|
|
#define CMD_ASE (1<<5) /* async schedule enable */
|
||
|
|
#define CMD_PSE (1<<4) /* periodic schedule enable */
|
||
|
|
/* 3:2 is periodic frame list size */
|
||
|
|
#define CMD_RESET (1<<1) /* reset HC not bus */
|
||
|
|
#define CMD_RUN (1<<0) /* start/stop HC */
|
||
|
|
|
||
|
|
/* USBSTS: offset 0x04 */
|
||
|
|
u32 status;
|
||
|
|
#define STS_ASS (1<<15) /* Async Schedule Status */
|
||
|
|
#define STS_PSS (1<<14) /* Periodic Schedule Status */
|
||
|
|
#define STS_RECL (1<<13) /* Reclamation */
|
||
|
|
#define STS_HALT (1<<12) /* Not running (any reason) */
|
||
|
|
/* some bits reserved */
|
||
|
|
/* these STS_* flags are also intr_enable bits (USBINTR) */
|
||
|
|
#define STS_IAA (1<<5) /* Interrupted on async advance */
|
||
|
|
#define STS_FATAL (1<<4) /* such as some PCI access errors */
|
||
|
|
#define STS_FLR (1<<3) /* frame list rolled over */
|
||
|
|
#define STS_PCD (1<<2) /* port change detect */
|
||
|
|
#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
|
||
|
|
#define STS_INT (1<<0) /* "normal" completion (short, ...) */
|
||
|
|
|
||
|
|
/* USBINTR: offset 0x08 */
|
||
|
|
u32 intr_enable;
|
||
|
|
|
||
|
|
/* FRINDEX: offset 0x0C */
|
||
|
|
u32 frame_index; /* current microframe number */
|
||
|
|
/* CTRLDSSEGMENT: offset 0x10 */
|
||
|
|
u32 segment; /* address bits 63:32 if needed */
|
||
|
|
/* PERIODICLISTBASE: offset 0x14 */
|
||
|
|
u32 frame_list; /* points to periodic list */
|
||
|
|
/* ASYNCLISTADDR: offset 0x18 */
|
||
|
|
u32 async_next; /* address of next async queue head */
|
||
|
|
|
||
|
|
u32 reserved1;
|
||
|
|
/* PORTSC: offset 0x20 */
|
||
|
|
u32 port_status;
|
||
|
|
/* 31:23 reserved */
|
||
|
|
#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
|
||
|
|
#define PORT_RESET (1<<8) /* reset port */
|
||
|
|
#define PORT_SUSPEND (1<<7) /* suspend port */
|
||
|
|
#define PORT_RESUME (1<<6) /* resume it */
|
||
|
|
#define PORT_PEC (1<<3) /* port enable change */
|
||
|
|
#define PORT_PE (1<<2) /* port enable */
|
||
|
|
#define PORT_CSC (1<<1) /* connect status change */
|
||
|
|
#define PORT_CONNECT (1<<0) /* device connected */
|
||
|
|
#define PORT_RWC_BITS (PORT_CSC | PORT_PEC)
|
||
|
|
|
||
|
|
u32 reserved2[3];
|
||
|
|
|
||
|
|
/* BMCSR: offset 0x30 */
|
||
|
|
u32 bmcsr; /* Bus Moniter Control/Status Register */
|
||
|
|
#define BMCSR_HOST_SPD_TYP (3<<9)
|
||
|
|
#define BMCSR_VBUS_OFF (1<<4)
|
||
|
|
#define BMCSR_INT_POLARITY (1<<3)
|
||
|
|
|
||
|
|
/* BMISR: offset 0x34 */
|
||
|
|
u32 bmisr; /* Bus Moniter Interrupt Status Register*/
|
||
|
|
#define BMISR_OVC (1<<1)
|
||
|
|
|
||
|
|
/* BMIER: offset 0x38 */
|
||
|
|
u32 bmier; /* Bus Moniter Interrupt Enable Register */
|
||
|
|
#define BMIER_OVC_EN (1<<1)
|
||
|
|
#define BMIER_VBUS_ERR_EN (1<<0)
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Appendix C, Debug port ... intended for use with special "debug devices"
|
||
|
|
* that can help if there's no serial console. (nonstandard enumeration.)
|
||
|
|
*/
|
||
|
|
struct fusbh200_dbg_port {
|
||
|
|
u32 control;
|
||
|
|
#define DBGP_OWNER (1<<30)
|
||
|
|
#define DBGP_ENABLED (1<<28)
|
||
|
|
#define DBGP_DONE (1<<16)
|
||
|
|
#define DBGP_INUSE (1<<10)
|
||
|
|
#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
|
||
|
|
# define DBGP_ERR_BAD 1
|
||
|
|
# define DBGP_ERR_SIGNAL 2
|
||
|
|
#define DBGP_ERROR (1<<6)
|
||
|
|
#define DBGP_GO (1<<5)
|
||
|
|
#define DBGP_OUT (1<<4)
|
||
|
|
#define DBGP_LEN(x) (((x)>>0)&0x0f)
|
||
|
|
u32 pids;
|
||
|
|
#define DBGP_PID_GET(x) (((x)>>16)&0xff)
|
||
|
|
#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
|
||
|
|
u32 data03;
|
||
|
|
u32 data47;
|
||
|
|
u32 address;
|
||
|
|
#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
|
||
|
|
};
|
||
|
|
|
||
|
|
#ifdef CONFIG_EARLY_PRINTK_DBGP
|
||
|
|
#include <linux/init.h>
|
||
|
|
extern int __init early_dbgp_init(char *s);
|
||
|
|
extern struct console early_dbgp_console;
|
||
|
|
#endif /* CONFIG_EARLY_PRINTK_DBGP */
|
||
|
|
|
||
|
|
struct usb_hcd;
|
||
|
|
|
||
|
|
static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd)
|
||
|
|
{
|
||
|
|
return 1; /* Shouldn't this be 0? */
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int xen_dbgp_external_startup(struct usb_hcd *hcd)
|
||
|
|
{
|
||
|
|
return -1;
|
||
|
|
}
|
||
|
|
|
||
|
|
#ifdef CONFIG_EARLY_PRINTK_DBGP
|
||
|
|
/* Call backs from fusbh200 host driver to fusbh200 debug driver */
|
||
|
|
extern int dbgp_external_startup(struct usb_hcd *);
|
||
|
|
extern int dbgp_reset_prep(struct usb_hcd *hcd);
|
||
|
|
#else
|
||
|
|
static inline int dbgp_reset_prep(struct usb_hcd *hcd)
|
||
|
|
{
|
||
|
|
return xen_dbgp_reset_prep(hcd);
|
||
|
|
}
|
||
|
|
static inline int dbgp_external_startup(struct usb_hcd *hcd)
|
||
|
|
{
|
||
|
|
return xen_dbgp_external_startup(hcd);
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
#define QTD_NEXT(fusbh200, dma) cpu_to_hc32(fusbh200, (u32)dma)
|
||
|
|
|
||
|
|
/*
|
||
|
|
* EHCI Specification 0.95 Section 3.5
|
||
|
|
* QTD: describe data transfer components (buffer, direction, ...)
|
||
|
|
* See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
|
||
|
|
*
|
||
|
|
* These are associated only with "QH" (Queue Head) structures,
|
||
|
|
* used with control, bulk, and interrupt transfers.
|
||
|
|
*/
|
||
|
|
struct fusbh200_qtd {
|
||
|
|
/* first part defined by EHCI spec */
|
||
|
|
__hc32 hw_next; /* see EHCI 3.5.1 */
|
||
|
|
__hc32 hw_alt_next; /* see EHCI 3.5.2 */
|
||
|
|
__hc32 hw_token; /* see EHCI 3.5.3 */
|
||
|
|
#define QTD_TOGGLE (1 << 31) /* data toggle */
|
||
|
|
#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
|
||
|
|
#define QTD_IOC (1 << 15) /* interrupt on complete */
|
||
|
|
#define QTD_CERR(tok) (((tok)>>10) & 0x3)
|
||
|
|
#define QTD_PID(tok) (((tok)>>8) & 0x3)
|
||
|
|
#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
|
||
|
|
#define QTD_STS_HALT (1 << 6) /* halted on error */
|
||
|
|
#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
|
||
|
|
#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
|
||
|
|
#define QTD_STS_XACT (1 << 3) /* device gave illegal response */
|
||
|
|
#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
|
||
|
|
#define QTD_STS_STS (1 << 1) /* split transaction state */
|
||
|
|
#define QTD_STS_PING (1 << 0) /* issue PING? */
|
||
|
|
|
||
|
|
#define ACTIVE_BIT(fusbh200) cpu_to_hc32(fusbh200, QTD_STS_ACTIVE)
|
||
|
|
#define HALT_BIT(fusbh200) cpu_to_hc32(fusbh200, QTD_STS_HALT)
|
||
|
|
#define STATUS_BIT(fusbh200) cpu_to_hc32(fusbh200, QTD_STS_STS)
|
||
|
|
|
||
|
|
__hc32 hw_buf [5]; /* see EHCI 3.5.4 */
|
||
|
|
__hc32 hw_buf_hi [5]; /* Appendix B */
|
||
|
|
|
||
|
|
/* the rest is HCD-private */
|
||
|
|
dma_addr_t qtd_dma; /* qtd address */
|
||
|
|
struct list_head qtd_list; /* sw qtd list */
|
||
|
|
struct urb *urb; /* qtd's urb */
|
||
|
|
size_t length; /* length of buffer */
|
||
|
|
} __attribute__ ((aligned (32)));
|
||
|
|
|
||
|
|
/* mask NakCnt+T in qh->hw_alt_next */
|
||
|
|
#define QTD_MASK(fusbh200) cpu_to_hc32 (fusbh200, ~0x1f)
|
||
|
|
|
||
|
|
#define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1)
|
||
|
|
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/* type tag from {qh,itd,fstn}->hw_next */
|
||
|
|
#define Q_NEXT_TYPE(fusbh200,dma) ((dma) & cpu_to_hc32(fusbh200, 3 << 1))
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Now the following defines are not converted using the
|
||
|
|
* cpu_to_le32() macro anymore, since we have to support
|
||
|
|
* "dynamic" switching between be and le support, so that the driver
|
||
|
|
* can be used on one system with SoC EHCI controller using big-endian
|
||
|
|
* descriptors as well as a normal little-endian PCI EHCI controller.
|
||
|
|
*/
|
||
|
|
/* values for that type tag */
|
||
|
|
#define Q_TYPE_ITD (0 << 1)
|
||
|
|
#define Q_TYPE_QH (1 << 1)
|
||
|
|
#define Q_TYPE_SITD (2 << 1)
|
||
|
|
#define Q_TYPE_FSTN (3 << 1)
|
||
|
|
|
||
|
|
/* next async queue entry, or pointer to interrupt/periodic QH */
|
||
|
|
#define QH_NEXT(fusbh200,dma) (cpu_to_hc32(fusbh200, (((u32)dma)&~0x01f)|Q_TYPE_QH))
|
||
|
|
|
||
|
|
/* for periodic/async schedules and qtd lists, mark end of list */
|
||
|
|
#define FUSBH200_LIST_END(fusbh200) cpu_to_hc32(fusbh200, 1) /* "null pointer" to hw */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Entries in periodic shadow table are pointers to one of four kinds
|
||
|
|
* of data structure. That's dictated by the hardware; a type tag is
|
||
|
|
* encoded in the low bits of the hardware's periodic schedule. Use
|
||
|
|
* Q_NEXT_TYPE to get the tag.
|
||
|
|
*
|
||
|
|
* For entries in the async schedule, the type tag always says "qh".
|
||
|
|
*/
|
||
|
|
union fusbh200_shadow {
|
||
|
|
struct fusbh200_qh *qh; /* Q_TYPE_QH */
|
||
|
|
struct fusbh200_itd *itd; /* Q_TYPE_ITD */
|
||
|
|
struct fusbh200_fstn *fstn; /* Q_TYPE_FSTN */
|
||
|
|
__hc32 *hw_next; /* (all types) */
|
||
|
|
void *ptr;
|
||
|
|
};
|
||
|
|
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* EHCI Specification 0.95 Section 3.6
|
||
|
|
* QH: describes control/bulk/interrupt endpoints
|
||
|
|
* See Fig 3-7 "Queue Head Structure Layout".
|
||
|
|
*
|
||
|
|
* These appear in both the async and (for interrupt) periodic schedules.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* first part defined by EHCI spec */
|
||
|
|
struct fusbh200_qh_hw {
|
||
|
|
__hc32 hw_next; /* see EHCI 3.6.1 */
|
||
|
|
__hc32 hw_info1; /* see EHCI 3.6.2 */
|
||
|
|
#define QH_CONTROL_EP (1 << 27) /* FS/LS control endpoint */
|
||
|
|
#define QH_HEAD (1 << 15) /* Head of async reclamation list */
|
||
|
|
#define QH_TOGGLE_CTL (1 << 14) /* Data toggle control */
|
||
|
|
#define QH_HIGH_SPEED (2 << 12) /* Endpoint speed */
|
||
|
|
#define QH_LOW_SPEED (1 << 12)
|
||
|
|
#define QH_FULL_SPEED (0 << 12)
|
||
|
|
#define QH_INACTIVATE (1 << 7) /* Inactivate on next transaction */
|
||
|
|
__hc32 hw_info2; /* see EHCI 3.6.2 */
|
||
|
|
#define QH_SMASK 0x000000ff
|
||
|
|
#define QH_CMASK 0x0000ff00
|
||
|
|
#define QH_HUBADDR 0x007f0000
|
||
|
|
#define QH_HUBPORT 0x3f800000
|
||
|
|
#define QH_MULT 0xc0000000
|
||
|
|
__hc32 hw_current; /* qtd list - see EHCI 3.6.4 */
|
||
|
|
|
||
|
|
/* qtd overlay (hardware parts of a struct fusbh200_qtd) */
|
||
|
|
__hc32 hw_qtd_next;
|
||
|
|
__hc32 hw_alt_next;
|
||
|
|
__hc32 hw_token;
|
||
|
|
__hc32 hw_buf [5];
|
||
|
|
__hc32 hw_buf_hi [5];
|
||
|
|
} __attribute__ ((aligned(32)));
|
||
|
|
|
||
|
|
struct fusbh200_qh {
|
||
|
|
struct fusbh200_qh_hw *hw; /* Must come first */
|
||
|
|
/* the rest is HCD-private */
|
||
|
|
dma_addr_t qh_dma; /* address of qh */
|
||
|
|
union fusbh200_shadow qh_next; /* ptr to qh; or periodic */
|
||
|
|
struct list_head qtd_list; /* sw qtd list */
|
||
|
|
struct list_head intr_node; /* list of intr QHs */
|
||
|
|
struct fusbh200_qtd *dummy;
|
||
|
|
struct fusbh200_qh *unlink_next; /* next on unlink list */
|
||
|
|
|
||
|
|
unsigned unlink_cycle;
|
||
|
|
|
||
|
|
u8 needs_rescan; /* Dequeue during giveback */
|
||
|
|
u8 qh_state;
|
||
|
|
#define QH_STATE_LINKED 1 /* HC sees this */
|
||
|
|
#define QH_STATE_UNLINK 2 /* HC may still see this */
|
||
|
|
#define QH_STATE_IDLE 3 /* HC doesn't see this */
|
||
|
|
#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on unlink q */
|
||
|
|
#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
|
||
|
|
|
||
|
|
u8 xacterrs; /* XactErr retry counter */
|
||
|
|
#define QH_XACTERR_MAX 32 /* XactErr retry limit */
|
||
|
|
|
||
|
|
/* periodic schedule info */
|
||
|
|
u8 usecs; /* intr bandwidth */
|
||
|
|
u8 gap_uf; /* uframes split/csplit gap */
|
||
|
|
u8 c_usecs; /* ... split completion bw */
|
||
|
|
u16 tt_usecs; /* tt downstream bandwidth */
|
||
|
|
unsigned short period; /* polling interval */
|
||
|
|
unsigned short start; /* where polling starts */
|
||
|
|
#define NO_FRAME ((unsigned short)~0) /* pick new start */
|
||
|
|
|
||
|
|
struct usb_device *dev; /* access to TT */
|
||
|
|
unsigned is_out:1; /* bulk or intr OUT */
|
||
|
|
unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
|
||
|
|
};
|
||
|
|
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/* description of one iso transaction (up to 3 KB data if highspeed) */
|
||
|
|
struct fusbh200_iso_packet {
|
||
|
|
/* These will be copied to iTD when scheduling */
|
||
|
|
u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */
|
||
|
|
__hc32 transaction; /* itd->hw_transaction[i] |= */
|
||
|
|
u8 cross; /* buf crosses pages */
|
||
|
|
/* for full speed OUT splits */
|
||
|
|
u32 buf1;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* temporary schedule data for packets from iso urbs (both speeds)
|
||
|
|
* each packet is one logical usb transaction to the device (not TT),
|
||
|
|
* beginning at stream->next_uframe
|
||
|
|
*/
|
||
|
|
struct fusbh200_iso_sched {
|
||
|
|
struct list_head td_list;
|
||
|
|
unsigned span;
|
||
|
|
struct fusbh200_iso_packet packet [0];
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* fusbh200_iso_stream - groups all (s)itds for this endpoint.
|
||
|
|
* acts like a qh would, if EHCI had them for ISO.
|
||
|
|
*/
|
||
|
|
struct fusbh200_iso_stream {
|
||
|
|
/* first field matches fusbh200_hq, but is NULL */
|
||
|
|
struct fusbh200_qh_hw *hw;
|
||
|
|
|
||
|
|
u8 bEndpointAddress;
|
||
|
|
u8 highspeed;
|
||
|
|
struct list_head td_list; /* queued itds */
|
||
|
|
struct list_head free_list; /* list of unused itds */
|
||
|
|
struct usb_device *udev;
|
||
|
|
struct usb_host_endpoint *ep;
|
||
|
|
|
||
|
|
/* output of (re)scheduling */
|
||
|
|
int next_uframe;
|
||
|
|
__hc32 splits;
|
||
|
|
|
||
|
|
/* the rest is derived from the endpoint descriptor,
|
||
|
|
* trusting urb->interval == f(epdesc->bInterval) and
|
||
|
|
* including the extra info for hw_bufp[0..2]
|
||
|
|
*/
|
||
|
|
u8 usecs, c_usecs;
|
||
|
|
u16 interval;
|
||
|
|
u16 tt_usecs;
|
||
|
|
u16 maxp;
|
||
|
|
u16 raw_mask;
|
||
|
|
unsigned bandwidth;
|
||
|
|
|
||
|
|
/* This is used to initialize iTD's hw_bufp fields */
|
||
|
|
__hc32 buf0;
|
||
|
|
__hc32 buf1;
|
||
|
|
__hc32 buf2;
|
||
|
|
|
||
|
|
/* this is used to initialize sITD's tt info */
|
||
|
|
__hc32 address;
|
||
|
|
};
|
||
|
|
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* EHCI Specification 0.95 Section 3.3
|
||
|
|
* Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
|
||
|
|
*
|
||
|
|
* Schedule records for high speed iso xfers
|
||
|
|
*/
|
||
|
|
struct fusbh200_itd {
|
||
|
|
/* first part defined by EHCI spec */
|
||
|
|
__hc32 hw_next; /* see EHCI 3.3.1 */
|
||
|
|
__hc32 hw_transaction [8]; /* see EHCI 3.3.2 */
|
||
|
|
#define FUSBH200_ISOC_ACTIVE (1<<31) /* activate transfer this slot */
|
||
|
|
#define FUSBH200_ISOC_BUF_ERR (1<<30) /* Data buffer error */
|
||
|
|
#define FUSBH200_ISOC_BABBLE (1<<29) /* babble detected */
|
||
|
|
#define FUSBH200_ISOC_XACTERR (1<<28) /* XactErr - transaction error */
|
||
|
|
#define FUSBH200_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
|
||
|
|
#define FUSBH200_ITD_IOC (1 << 15) /* interrupt on complete */
|
||
|
|
|
||
|
|
#define ITD_ACTIVE(fusbh200) cpu_to_hc32(fusbh200, FUSBH200_ISOC_ACTIVE)
|
||
|
|
|
||
|
|
__hc32 hw_bufp [7]; /* see EHCI 3.3.3 */
|
||
|
|
__hc32 hw_bufp_hi [7]; /* Appendix B */
|
||
|
|
|
||
|
|
/* the rest is HCD-private */
|
||
|
|
dma_addr_t itd_dma; /* for this itd */
|
||
|
|
union fusbh200_shadow itd_next; /* ptr to periodic q entry */
|
||
|
|
|
||
|
|
struct urb *urb;
|
||
|
|
struct fusbh200_iso_stream *stream; /* endpoint's queue */
|
||
|
|
struct list_head itd_list; /* list of stream's itds */
|
||
|
|
|
||
|
|
/* any/all hw_transactions here may be used by that urb */
|
||
|
|
unsigned frame; /* where scheduled */
|
||
|
|
unsigned pg;
|
||
|
|
unsigned index[8]; /* in urb->iso_frame_desc */
|
||
|
|
} __attribute__ ((aligned (32)));
|
||
|
|
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* EHCI Specification 0.96 Section 3.7
|
||
|
|
* Periodic Frame Span Traversal Node (FSTN)
|
||
|
|
*
|
||
|
|
* Manages split interrupt transactions (using TT) that span frame boundaries
|
||
|
|
* into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN
|
||
|
|
* makes the HC jump (back) to a QH to scan for fs/ls QH completions until
|
||
|
|
* it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
|
||
|
|
*/
|
||
|
|
struct fusbh200_fstn {
|
||
|
|
__hc32 hw_next; /* any periodic q entry */
|
||
|
|
__hc32 hw_prev; /* qh or FUSBH200_LIST_END */
|
||
|
|
|
||
|
|
/* the rest is HCD-private */
|
||
|
|
dma_addr_t fstn_dma;
|
||
|
|
union fusbh200_shadow fstn_next; /* ptr to periodic q entry */
|
||
|
|
} __attribute__ ((aligned (32)));
|
||
|
|
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/* Prepare the PORTSC wakeup flags during controller suspend/resume */
|
||
|
|
|
||
|
|
#define fusbh200_prepare_ports_for_controller_suspend(fusbh200, do_wakeup) \
|
||
|
|
fusbh200_adjust_port_wakeup_flags(fusbh200, true, do_wakeup);
|
||
|
|
|
||
|
|
#define fusbh200_prepare_ports_for_controller_resume(fusbh200) \
|
||
|
|
fusbh200_adjust_port_wakeup_flags(fusbh200, false, false);
|
||
|
|
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Some EHCI controllers have a Transaction Translator built into the
|
||
|
|
* root hub. This is a non-standard feature. Each controller will need
|
||
|
|
* to add code to the following inline functions, and call them as
|
||
|
|
* needed (mostly in root hub code).
|
||
|
|
*/
|
||
|
|
|
||
|
|
static inline unsigned int
|
||
|
|
fusbh200_get_speed(struct fusbh200_hcd *fusbh200, unsigned int portsc)
|
||
|
|
{
|
||
|
|
return (readl(&fusbh200->regs->bmcsr)
|
||
|
|
& BMCSR_HOST_SPD_TYP) >> 9;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Returns the speed of a device attached to a port on the root hub. */
|
||
|
|
static inline unsigned int
|
||
|
|
fusbh200_port_speed(struct fusbh200_hcd *fusbh200, unsigned int portsc)
|
||
|
|
{
|
||
|
|
switch (fusbh200_get_speed(fusbh200, portsc)) {
|
||
|
|
case 0:
|
||
|
|
return 0;
|
||
|
|
case 1:
|
||
|
|
return USB_PORT_STAT_LOW_SPEED;
|
||
|
|
case 2:
|
||
|
|
default:
|
||
|
|
return USB_PORT_STAT_HIGH_SPEED;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
#define fusbh200_has_fsl_portno_bug(e) (0)
|
||
|
|
|
||
|
|
/*
|
||
|
|
* While most USB host controllers implement their registers in
|
||
|
|
* little-endian format, a minority (celleb companion chip) implement
|
||
|
|
* them in big endian format.
|
||
|
|
*
|
||
|
|
* This attempts to support either format at compile time without a
|
||
|
|
* runtime penalty, or both formats with the additional overhead
|
||
|
|
* of checking a flag bit.
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define fusbh200_big_endian_mmio(e) 0
|
||
|
|
#define fusbh200_big_endian_capbase(e) 0
|
||
|
|
|
||
|
|
static inline unsigned int fusbh200_readl(const struct fusbh200_hcd *fusbh200,
|
||
|
|
__u32 __iomem * regs)
|
||
|
|
{
|
||
|
|
return readl(regs);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void fusbh200_writel(const struct fusbh200_hcd *fusbh200,
|
||
|
|
const unsigned int val, __u32 __iomem *regs)
|
||
|
|
{
|
||
|
|
writel(val, regs);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* cpu to fusbh200 */
|
||
|
|
static inline __hc32 cpu_to_hc32 (const struct fusbh200_hcd *fusbh200, const u32 x)
|
||
|
|
{
|
||
|
|
return cpu_to_le32(x);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* fusbh200 to cpu */
|
||
|
|
static inline u32 hc32_to_cpu (const struct fusbh200_hcd *fusbh200, const __hc32 x)
|
||
|
|
{
|
||
|
|
return le32_to_cpu(x);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline u32 hc32_to_cpup (const struct fusbh200_hcd *fusbh200, const __hc32 *x)
|
||
|
|
{
|
||
|
|
return le32_to_cpup(x);
|
||
|
|
}
|
||
|
|
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
static inline unsigned fusbh200_read_frame_index(struct fusbh200_hcd *fusbh200)
|
||
|
|
{
|
||
|
|
return fusbh200_readl(fusbh200, &fusbh200->regs->frame_index);
|
||
|
|
}
|
||
|
|
|
||
|
|
#define fusbh200_itdlen(urb, desc, t) ({ \
|
||
|
|
usb_pipein((urb)->pipe) ? \
|
||
|
|
(desc)->length - FUSBH200_ITD_LENGTH(t) : \
|
||
|
|
FUSBH200_ITD_LENGTH(t); \
|
||
|
|
})
|
||
|
|
/*-------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
#endif /* __LINUX_FUSBH200_H */
|