M7350/kernel/drivers/mtd/nand/xway_nand.c

/*
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms of the GNU General Public License version 2 as published
 *  by the Free Software Foundation.
 *
 *  Copyright © 2012 John Crispin <blogic@openwrt.org>
 */

#include <linux/mtd/nand.h>
#include <linux/of_gpio.h>
#include <linux/of_platform.h>

#include <lantiq_soc.h>

/* nand registers */
#define EBU_ADDSEL1		0x24
#define EBU_NAND_CON		0xB0
#define EBU_NAND_WAIT		0xB4
#define EBU_NAND_ECC0		0xB8
#define EBU_NAND_ECC_AC		0xBC

/* nand commands */
#define NAND_CMD_ALE		(1 << 2)
#define NAND_CMD_CLE		(1 << 3)
#define NAND_CMD_CS		(1 << 4)
#define NAND_WRITE_CMD_RESET	0xff
#define NAND_WRITE_CMD		(NAND_CMD_CS | NAND_CMD_CLE)
#define NAND_WRITE_ADDR		(NAND_CMD_CS | NAND_CMD_ALE)
#define NAND_WRITE_DATA		(NAND_CMD_CS)
#define NAND_READ_DATA		(NAND_CMD_CS)
#define NAND_WAIT_WR_C		(1 << 3)
#define NAND_WAIT_RD		(0x1)

/* we need to tel the ebu which addr we mapped the nand to */
#define ADDSEL1_MASK(x)		(x << 4)
#define ADDSEL1_REGEN		1

/* we need to tell the EBU that we have nand attached and set it up properly */
#define BUSCON1_SETUP		(1 << 22)
#define BUSCON1_BCGEN_RES	(0x3 << 12)
#define BUSCON1_WAITWRC2	(2 << 8)
#define BUSCON1_WAITRDC2	(2 << 6)
#define BUSCON1_HOLDC1		(1 << 4)
#define BUSCON1_RECOVC1		(1 << 2)
#define BUSCON1_CMULT4		1

#define NAND_CON_CE		(1 << 20)
#define NAND_CON_OUT_CS1	(1 << 10)
#define NAND_CON_IN_CS1		(1 << 8)
#define NAND_CON_PRE_P		(1 << 7)
#define NAND_CON_WP_P		(1 << 6)
#define NAND_CON_SE_P		(1 << 5)
#define NAND_CON_CS_P		(1 << 4)
#define NAND_CON_CSMUX		(1 << 1)
#define NAND_CON_NANDM		1

static void xway_reset_chip(struct nand_chip *chip)
{
	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
	unsigned long flags;

	nandaddr &= ~NAND_WRITE_ADDR;
	nandaddr |= NAND_WRITE_CMD;

	/* finish with a reset */
	spin_lock_irqsave(&ebu_lock, flags);
	writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
		;
	spin_unlock_irqrestore(&ebu_lock, flags);
}

static void xway_select_chip(struct mtd_info *mtd, int chip)
{

	switch (chip) {
	case -1:
		ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
		ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
		break;
	case 0:
		ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
		ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
		break;
	default:
		BUG();
	}
}

static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
	struct nand_chip *this = mtd->priv;
	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
	unsigned long flags;

	if (ctrl & NAND_CTRL_CHANGE) {
		nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
		if (ctrl & NAND_CLE)
			nandaddr |= NAND_WRITE_CMD;
		else
			nandaddr |= NAND_WRITE_ADDR;
		this->IO_ADDR_W = (void __iomem *) nandaddr;
	}

	if (cmd != NAND_CMD_NONE) {
		spin_lock_irqsave(&ebu_lock, flags);
		writeb(cmd, this->IO_ADDR_W);
		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
			;
		spin_unlock_irqrestore(&ebu_lock, flags);
	}
}

static int xway_dev_ready(struct mtd_info *mtd)
{
	return ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD;
}

static unsigned char xway_read_byte(struct mtd_info *mtd)
{
	struct nand_chip *this = mtd->priv;
	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
	unsigned long flags;
	int ret;

	spin_lock_irqsave(&ebu_lock, flags);
	ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
	spin_unlock_irqrestore(&ebu_lock, flags);

	return ret;
}

static int xway_nand_probe(struct platform_device *pdev)
{
	struct nand_chip *this = platform_get_drvdata(pdev);
	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
	const __be32 *cs = of_get_property(pdev->dev.of_node,
					"lantiq,cs", NULL);
	u32 cs_flag = 0;

	/* load our CS from the DT. Either we find a valid 1 or default to 0 */
	if (cs && (*cs == 1))
		cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;

	/* setup the EBU to run in NAND mode on our base addr */
	ltq_ebu_w32(CPHYSADDR(nandaddr)
		| ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);

	ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
		| BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
		| BUSCON1_CMULT4, LTQ_EBU_BUSCON1);

	ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
		| NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
		| cs_flag, EBU_NAND_CON);

	/* finish with a reset */
	xway_reset_chip(this);

	return 0;
}

/* allow users to override the partition in DT using the cmdline */
static const char *part_probes[] = { "cmdlinepart", "ofpart", NULL };

static struct platform_nand_data xway_nand_data = {
	.chip = {
		.nr_chips		= 1,
		.chip_delay		= 30,
		.part_probe_types	= part_probes,
	},
	.ctrl = {
		.probe		= xway_nand_probe,
		.cmd_ctrl	= xway_cmd_ctrl,
		.dev_ready	= xway_dev_ready,
		.select_chip	= xway_select_chip,
		.read_byte	= xway_read_byte,
	}
};

/*
 * Try to find the node inside the DT. If it is available attach out
 * platform_nand_data
 */
static int __init xway_register_nand(void)
{
	struct device_node *node;
	struct platform_device *pdev;

	node = of_find_compatible_node(NULL, NULL, "lantiq,nand-xway");
	if (!node)
		return -ENOENT;
	pdev = of_find_device_by_node(node);
	if (!pdev)
		return -EINVAL;
	pdev->dev.platform_data = &xway_nand_data;
	of_node_put(node);
	return 0;
}

subsys_initcall(xway_register_nand);