{0x01,"SGT Length Error. The descriptor is trying to read more data than is contained in the SGT table."},
{0x02,"SGT Null Entry Error."},
{0x03,"Job Ring Control Error. There is a bad value in the Job Ring Control register."},
{0x04,"Invalid Descriptor Command. The Descriptor Command field is invalid."},
{0x05,"Reserved."},
{0x06,"Invalid KEY Command"},
{0x07,"Invalid LOAD Command"},
{0x08,"Invalid STORE Command"},
{0x09,"Invalid OPERATION Command"},
{0x0A,"Invalid FIFO LOAD Command"},
{0x0B,"Invalid FIFO STORE Command"},
{0x0C,"Invalid MOVE/MOVE_LEN Command"},
{0x0D,"Invalid JUMP Command. A nonlocal JUMP Command is invalid because the target is not a Job Header Command, or the jump is from a Trusted Descriptor to a Job Descriptor, or because the target Descriptor contains a Shared Descriptor."},
{0x0E,"Invalid MATH Command"},
{0x0F,"Invalid SIGNATURE Command"},
{0x10,"Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO LOAD, or SEQ FIFO STORE decremented the input or output sequence length below 0. This error may result if a built-in PROTOCOL Command has encountered a malformed PDU."},
{0x11,"Skip data type invalid. The type must be 0xE or 0xF."},
{0x12,"Shared Descriptor Header Error"},
{0x13,"Header Error. Invalid length or parity, or certain other problems."},
{0x14,"Burster Error. Burster has gotten to an illegal state"},
{0x15,"Context Register Length Error. The descriptor is trying to read or write past the end of the Context Register. A SEQ LOAD or SEQ STORE with the VLF bit set was executed with too large a length in the variable length register (VSOL for SEQ STORE or VSIL for SEQ LOAD)."},
{0x16,"DMA Error"},
{0x17,"Reserved."},
{0x1A,"Job failed due to JR reset"},
{0x1B,"Job failed due to Fail Mode"},
{0x1C,"DECO Watchdog timer timeout error"},
{0x1D,"DECO tried to copy a key from another DECO but the other DECO's Key Registers were locked"},
{0x1E,"DECO attempted to copy data from a DECO that had an unmasked Descriptor error"},
{0x1F,"LIODN error. DECO was trying to share from itself or from another DECO but the two Non-SEQ LIODN values didn't match or the 'shared from' DECO's Descriptor required that the SEQ LIODNs be the same and they aren't."},
{0x20,"DECO has completed a reset initiated via the DRR register"},
{0x21,"Nonce error. When using EKT (CCM) key encryption option in the FIFO STORE Command, the Nonce counter reached its maximum value and this encryption mode can no longer be used."},
{0x22,"Meta data is too large (> 511 bytes) for TLS decap (input frame; block ciphers) and IPsec decap (output frame, when doing the next header byte update) and DCRC (output frame)."},
{0x23,"Read Input Frame error"},
{0x24,"JDKEK, TDKEK or TDSK not loaded error"},
{0x80,"DNR (do not run) error"},
{0x81,"undefined protocol command"},
{0x82,"invalid setting in PDB"},
{0x83,"Anti-replay LATE error"},
{0x84,"Anti-replay REPLAY error"},
{0x85,"Sequence number overflow"},
{0x86,"Sigver invalid signature"},
{0x87,"DSA Sign Illegal test descriptor"},
{0x88,"Protocol Format Error - A protocol has seen an error in the format of data received. When running RSA, this means that formatting with random padding was used, and did not follow the form: 0x00, 0x02, 8-to-N bytes of non-zero pad, 0x00, F data."},
{0x89,"Protocol Size Error - A protocol has seen an error in size. When running RSA, pdb size N < (size of F) when no formatting is used; or pdb size N < (F + 11) when formatting is used."},
