954 lines
24 KiB
Plaintext
954 lines
24 KiB
Plaintext
|
/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License version 2 and
|
||
|
|
* only version 2 as published by the Free Software Foundation.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "msm8996-pinctrl.dtsi"
|
||
|
|
#include "msm8996-camera-sensor-adp.dtsi"
|
||
|
|
#include "msm8996-wsa881x.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
bluetooth: bt_qca6174 {
|
||
|
|
compatible = "qca,qca6174";
|
||
|
|
qca,bt-reset-gpio = <&pm8994_gpios 19 0>; /* BT_EN */
|
||
|
|
qca,bt-vdd-core-supply = <&pm8994_s3>;
|
||
|
|
qca,bt-vdd-pa-supply = <&rome_vreg>;
|
||
|
|
qca,bt-vdd-io-supply = <&pm8994_s4>;
|
||
|
|
qca,bt-vdd-xtal-supply = <&pm8994_l30>;
|
||
|
|
qca,bt-chip-pwd-voltage-level = <1300000 1300000>;
|
||
|
|
qca,bt-vdd-io-voltage-level = <1800000 1800000>;
|
||
|
|
qca,bt-vdd-xtal-voltage-level = <1800000 1800000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufs_ice {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdcc1_ice {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufsphy1 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufs1 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uartblsp2dm1 {
|
||
|
|
status = "ok";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart_console_active>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhc_1 {
|
||
|
|
vdd-supply = <&pm8994_l20>;
|
||
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
||
|
|
qcom,vdd-current-level = <200 570000>;
|
||
|
|
|
||
|
|
vdd-io-supply = <&pm8994_s4>;
|
||
|
|
qcom,vdd-io-always-on;
|
||
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
||
|
|
qcom,vdd-io-current-level = <110 325000>;
|
||
|
|
|
||
|
|
pinctrl-names = "active", "sleep";
|
||
|
|
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
|
||
|
|
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
|
||
|
|
|
||
|
|
qcom,clk-rates = <400000 20000000 25000000 50000000
|
||
|
|
96000000 192000000 384000000>;
|
||
|
|
qcom,ice-clk-rates = <300000000 150000000>;
|
||
|
|
qcom,nonremovable;
|
||
|
|
qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";
|
||
|
|
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhc_2 {
|
||
|
|
vdd-supply = <&pm8994_l21>;
|
||
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
||
|
|
qcom,vdd-current-level = <200 800000>;
|
||
|
|
|
||
|
|
vdd-io-supply = <&pm8994_l13>;
|
||
|
|
qcom,vdd-io-voltage-level = <1800000 2950000>;
|
||
|
|
qcom,vdd-io-current-level = <200 22000>;
|
||
|
|
|
||
|
|
pinctrl-names = "active", "sleep";
|
||
|
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||
|
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||
|
|
|
||
|
|
qcom,clk-rates = <400000 20000000 25000000
|
||
|
|
50000000 100000000 200000000>;
|
||
|
|
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
|
||
|
|
|
||
|
|
cd-gpios = <&tlmm 95 0x1>;
|
||
|
|
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_vadc {
|
||
|
|
chan@5 {
|
||
|
|
label = "vcoin";
|
||
|
|
reg = <5>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <1>;
|
||
|
|
qcom,calibration-type = "absolute";
|
||
|
|
qcom,scale-function = <0>;
|
||
|
|
qcom,hw-settle-time = <0>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@7 {
|
||
|
|
label = "vph_pwr";
|
||
|
|
reg = <7>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <1>;
|
||
|
|
qcom,calibration-type = "absolute";
|
||
|
|
qcom,scale-function = <0>;
|
||
|
|
qcom,hw-settle-time = <0>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@73 {
|
||
|
|
label = "msm_therm";
|
||
|
|
reg = <0x73>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@74 {
|
||
|
|
label = "emmc_therm";
|
||
|
|
reg = <0x74>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@75 {
|
||
|
|
label = "pa_therm0";
|
||
|
|
reg = <0x75>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@77 {
|
||
|
|
label = "pa_therm1";
|
||
|
|
reg = <0x77>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@78 {
|
||
|
|
label = "quiet_therm";
|
||
|
|
reg = <0x78>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@7c {
|
||
|
|
label = "xo_therm_buf";
|
||
|
|
reg = <0x7c>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <4>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@7c {
|
||
|
|
label = "xo_therm_buf";
|
||
|
|
reg = <0x7c>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <4>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_adc_tm {
|
||
|
|
chan@73 {
|
||
|
|
label = "msm_therm";
|
||
|
|
reg = <0x73>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x48>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@74 {
|
||
|
|
label = "emmc_therm";
|
||
|
|
reg = <0x74>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x68>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@75 {
|
||
|
|
label = "pa_therm0";
|
||
|
|
reg = <0x75>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x70>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@77 {
|
||
|
|
label = "pa_therm1";
|
||
|
|
reg = <0x77>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x78>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@78 {
|
||
|
|
label = "quiet_therm";
|
||
|
|
reg = <0x78>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x80>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@7c {
|
||
|
|
label = "xo_therm_buf";
|
||
|
|
reg = <0x7c>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <4>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x88>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss_hdmi_tx {
|
||
|
|
qcom,display-id = "secondary";
|
||
|
|
pinctrl-names = "hdmi_hpd_active", "hdmi_ddc_active", "hdmi_cec_active",
|
||
|
|
"hdmi_active", "hdmi_sleep";
|
||
|
|
pinctrl-0 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_suspend
|
||
|
|
&mdss_hdmi_cec_suspend>;
|
||
|
|
pinctrl-1 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_active
|
||
|
|
&mdss_hdmi_cec_suspend>;
|
||
|
|
pinctrl-2 = <&mdss_hdmi_hpd_active &mdss_hdmi_cec_active
|
||
|
|
&mdss_hdmi_ddc_suspend>;
|
||
|
|
pinctrl-3 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_active
|
||
|
|
&mdss_hdmi_cec_active>;
|
||
|
|
pinctrl-4 = <&mdss_hdmi_hpd_suspend &mdss_hdmi_ddc_suspend
|
||
|
|
&mdss_hdmi_cec_suspend>;
|
||
|
|
};
|
||
|
|
|
||
|
|
#include "msm8996-mdss-panels.dtsi"
|
||
|
|
|
||
|
|
&mdss_mdp {
|
||
|
|
qcom,mdss-pref-prim-intf = "dsi";
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss_dsi {
|
||
|
|
hw-config = "dual_dsi";
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss_dsi0 {
|
||
|
|
qcom,dsi-pref-prim-pan = <&dsi_adv7533_720p>;
|
||
|
|
pinctrl-names = "mdss_default", "mdss_sleep";
|
||
|
|
pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
|
||
|
|
pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
|
||
|
|
qcom,display-id = "primary";
|
||
|
|
|
||
|
|
qcom,panel-supply-entries {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
qcom,panel-supply-entry@0 {
|
||
|
|
reg = <0>;
|
||
|
|
qcom,supply-name = "vdd";
|
||
|
|
qcom,supply-min-voltage = <3300000>;
|
||
|
|
qcom,supply-max-voltage = <3300000>;
|
||
|
|
qcom,supply-enable-load = <100000>;
|
||
|
|
qcom,supply-disable-load = <100>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qcom,panel-supply-entry@1 {
|
||
|
|
reg = <1>;
|
||
|
|
qcom,supply-name = "vddio";
|
||
|
|
qcom,supply-min-voltage = <1800000>;
|
||
|
|
qcom,supply-max-voltage = <1800000>;
|
||
|
|
qcom,supply-enable-load = <100000>;
|
||
|
|
qcom,supply-disable-load = <100>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss_dsi1 {
|
||
|
|
qcom,dsi-pref-prim-pan = <&dsi_adv7533_720p>;
|
||
|
|
pinctrl-names = "mdss_default", "mdss_sleep";
|
||
|
|
pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
|
||
|
|
pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
|
||
|
|
qcom,display-id = "tertiary";
|
||
|
|
|
||
|
|
qcom,panel-supply-entries {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
qcom,panel-supply-entry@0 {
|
||
|
|
reg = <0>;
|
||
|
|
qcom,supply-name = "vdd";
|
||
|
|
qcom,supply-min-voltage = <3300000>;
|
||
|
|
qcom,supply-max-voltage = <3300000>;
|
||
|
|
qcom,supply-enable-load = <100000>;
|
||
|
|
qcom,supply-disable-load = <100>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qcom,panel-supply-entry@1 {
|
||
|
|
reg = <1>;
|
||
|
|
qcom,supply-name = "vddio";
|
||
|
|
qcom,supply-min-voltage = <1800000>;
|
||
|
|
qcom,supply-max-voltage = <1800000>;
|
||
|
|
qcom,supply-enable-load = <100000>;
|
||
|
|
qcom,supply-disable-load = <100>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_dual_sharp_video {
|
||
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
|
||
|
|
qcom,mdss-dsi-bl-min-level = <1>;
|
||
|
|
qcom,mdss-dsi-bl-max-level = <4095>;
|
||
|
|
qcom,cont-splash-enabled;
|
||
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_dual_nt35597_video {
|
||
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
|
||
|
|
qcom,mdss-dsi-bl-min-level = <1>;
|
||
|
|
qcom,mdss-dsi-bl-max-level = <4095>;
|
||
|
|
qcom,cont-splash-enabled;
|
||
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_dual_nt35597_cmd {
|
||
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
|
||
|
|
qcom,mdss-dsi-bl-min-level = <1>;
|
||
|
|
qcom,mdss-dsi-bl-max-level = <4095>;
|
||
|
|
qcom,cont-splash-enabled;
|
||
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||
|
|
qcom,partial-update-enabled;
|
||
|
|
qcom,panel-roi-alignment = <720 128 720 64 720 64>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_nt35597_dsc_video {
|
||
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
|
||
|
|
qcom,mdss-dsi-bl-min-level = <1>;
|
||
|
|
qcom,mdss-dsi-bl-max-level = <4095>;
|
||
|
|
qcom,cont-splash-enabled;
|
||
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_nt35597_dsc_cmd {
|
||
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
|
||
|
|
qcom,mdss-dsi-bl-min-level = <1>;
|
||
|
|
qcom,mdss-dsi-bl-max-level = <4095>;
|
||
|
|
qcom,cont-splash-enabled;
|
||
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_dual_jdi_video {
|
||
|
|
pwms = <&pmi8994_pwm_4 0 0>;
|
||
|
|
pwm-names = "backlight";
|
||
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
|
||
|
|
qcom,mdss-dsi-bl-pwm-pmi;
|
||
|
|
qcom,mdss-dsi-bl-pmic-pwm-frequency = <100>;
|
||
|
|
qcom,mdss-dsi-bl-min-level = <1>;
|
||
|
|
qcom,mdss-dsi-bl-max-level = <4095>;
|
||
|
|
qcom,5v-boost-gpio = <&pmi8994_gpios 8 0>;
|
||
|
|
qcom,cont-splash-enabled;
|
||
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_dual_jdi_cmd {
|
||
|
|
pwms = <&pmi8994_pwm_4 0 0>;
|
||
|
|
pwm-names = "backlight";
|
||
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
|
||
|
|
qcom,mdss-dsi-bl-pwm-pmi;
|
||
|
|
qcom,mdss-dsi-bl-pmic-pwm-frequency = <100>;
|
||
|
|
qcom,mdss-dsi-bl-min-level = <1>;
|
||
|
|
qcom,mdss-dsi-bl-max-level = <4095>;
|
||
|
|
qcom,5v-boost-gpio = <&pmi8994_gpios 8 0>;
|
||
|
|
qcom,cont-splash-enabled;
|
||
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||
|
|
qcom,partial-update-enabled;
|
||
|
|
qcom,panel-roi-alignment = <4 4 2 2 20 20>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_dual_jdi_4k_nofbc_video {
|
||
|
|
pwms = <&pmi8994_pwm_4 0 0>;
|
||
|
|
pwm-names = "backlight";
|
||
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
|
||
|
|
qcom,mdss-dsi-bl-pwm-pmi;
|
||
|
|
qcom,mdss-dsi-bl-pmic-pwm-frequency = <100>;
|
||
|
|
qcom,mdss-dsi-bl-min-level = <1>;
|
||
|
|
qcom,mdss-dsi-bl-max-level = <4095>;
|
||
|
|
qcom,cont-splash-enabled;
|
||
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/{
|
||
|
|
mtp_batterydata: qcom,battery-data {
|
||
|
|
qcom,batt-id-range-pct = <15>;
|
||
|
|
#include "batterydata-itech-3000mah.dtsi"
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_mpps {
|
||
|
|
mpp@a100 { /* MPP 2 */
|
||
|
|
qcom,mode = <1>; /* Digital output */
|
||
|
|
qcom,output-type = <0>; /* CMOS logic */
|
||
|
|
qcom,vin-sel = <2>; /* S4 1.8V */
|
||
|
|
qcom,src-sel = <0>; /* Constant */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
mpp@a300 { /* MPP 4 */
|
||
|
|
/* HDMI_5v_vreg regulator enable */
|
||
|
|
qcom,mode = <1>; /* Digital output */
|
||
|
|
qcom,output-type = <0>; /* CMOS logic */
|
||
|
|
qcom,vin-sel = <2>; /* S4 1.8V */
|
||
|
|
qcom,src-sel = <0>; /* Constant */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
qcom,invert = <0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&soc {
|
||
|
|
i2c@75ba000 {
|
||
|
|
synaptics@20 {
|
||
|
|
compatible = "synaptics,dsx";
|
||
|
|
reg = <0x20>;
|
||
|
|
interrupt-parent = <&tlmm>;
|
||
|
|
interrupts = <125 0x2008>;
|
||
|
|
vdd-supply = <&pm8994_l14>;
|
||
|
|
avdd-supply = <&pm8994_l22>;
|
||
|
|
pinctrl-names = "pmx_ts_active", "pmx_ts_suspend";
|
||
|
|
pinctrl-0 = <&ts_active>;
|
||
|
|
pinctrl-1 = <&ts_suspend>;
|
||
|
|
synaptics,display-coords = <0 0 1599 2559>;
|
||
|
|
synaptics,panel-coords = <0 0 1599 2703>;
|
||
|
|
synaptics,reset-gpio = <&tlmm 89 0x00>;
|
||
|
|
synaptics,irq-gpio = <&tlmm 125 0x2008>;
|
||
|
|
synaptics,disable-gpios;
|
||
|
|
synaptics,fw-name = "PR1702898-s3528t_00350002.img";
|
||
|
|
/* Underlying clocks used by secure touch */
|
||
|
|
clock-names = "iface_clk", "core_clk";
|
||
|
|
clocks = <&clock_gcc clk_gcc_blsp2_ahb_clk>,
|
||
|
|
<&clock_gcc clk_gcc_blsp2_qup6_i2c_apps_clk>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@75b6000 { /* BLSP8 */
|
||
|
|
/* ADV7533 configuration */
|
||
|
|
adv7533@3d {
|
||
|
|
compatible = "adv7533";
|
||
|
|
instance_id = <0>;
|
||
|
|
reg = <0x3d>;
|
||
|
|
adi,video-mode = <3>; /* 3 = 1080p */
|
||
|
|
adi,main-addr = <0x3D>;
|
||
|
|
adi,cec-dsi-addr = <0x3E>;
|
||
|
|
adi,enable-audio;
|
||
|
|
pinctrl-names = "pmx_adv7533_active",
|
||
|
|
"pmx_adv7533_suspend";
|
||
|
|
pinctrl-0 = <&adv7533_0_int_active
|
||
|
|
&adv7533_0_hpd_int_active
|
||
|
|
&adv7533_0_switch_active>;
|
||
|
|
pinctrl-1 = <&adv7533_0_int_suspend
|
||
|
|
&adv7533_0_hpd_int_suspend
|
||
|
|
&adv7533_0_switch_suspend>;
|
||
|
|
adi,irq-gpio = <&tlmm 106 0x2002>;
|
||
|
|
adi,switch-gpio = <&tlmm 105 0x1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
adv7533@39 {
|
||
|
|
compatible = "adv7533";
|
||
|
|
instance_id = <1>;
|
||
|
|
reg = <0x39>;
|
||
|
|
adi,video-mode = <3>; /* 3 = 1080p */
|
||
|
|
adi,main-addr = <0x39>;
|
||
|
|
adi,cec-dsi-addr = <0x3C>;
|
||
|
|
adi,enable-audio;
|
||
|
|
pinctrl-names = "pmx_adv7533_active",
|
||
|
|
"pmx_adv7533_suspend";
|
||
|
|
pinctrl-0 = <&adv7533_1_int_active
|
||
|
|
&adv7533_1_hpd_int_active
|
||
|
|
&adv7533_1_switch_active>;
|
||
|
|
pinctrl-1 = <&adv7533_1_int_suspend
|
||
|
|
&adv7533_1_hpd_int_suspend
|
||
|
|
&adv7533_1_switch_suspend>;
|
||
|
|
adi,irq-gpio = <&tlmm 108 0x2002>;
|
||
|
|
adi,switch-gpio = <&tlmm 107 0x0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gen-vkeys {
|
||
|
|
compatible = "qcom,gen-vkeys";
|
||
|
|
label = "synaptics_dsx";
|
||
|
|
qcom,disp-maxx = <1599>;
|
||
|
|
qcom,disp-maxy = <2559>;
|
||
|
|
qcom,panel-maxx = <1599>;
|
||
|
|
qcom,panel-maxy = <2703>;
|
||
|
|
qcom,key-codes = <158 139 102 217>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio_keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
input-name = "gpio-keys";
|
||
|
|
|
||
|
|
vol_up {
|
||
|
|
label = "volume_up";
|
||
|
|
gpios = <&pm8994_gpios 2 0x1>;
|
||
|
|
linux,input-type = <1>;
|
||
|
|
linux,code = <115>;
|
||
|
|
gpio-key,wakeup;
|
||
|
|
debounce-interval = <15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
cam_snapshot {
|
||
|
|
label = "cam_snapshot";
|
||
|
|
gpios = <&pm8994_gpios 4 0x1>;
|
||
|
|
linux,input-type = <1>;
|
||
|
|
linux,code = <766>;
|
||
|
|
gpio-key,wakeup;
|
||
|
|
debounce-interval = <15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
cam_focus {
|
||
|
|
label = "cam_focus";
|
||
|
|
gpios = <&pm8994_gpios 5 0x1>;
|
||
|
|
linux,input-type = <1>;
|
||
|
|
linux,code = <528>;
|
||
|
|
gpio-key,wakeup;
|
||
|
|
debounce-interval = <15>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
sound-9335 {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
sound-adp-agave {
|
||
|
|
compatible = "qcom,apq8096-asoc-snd-adp-agave";
|
||
|
|
qcom,model = "apq8096-adp-agave-snd-card";
|
||
|
|
|
||
|
|
asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, <&voip>, <&voice>,
|
||
|
|
<&loopback>, <&compress>, <&hostless>,
|
||
|
|
<&afe>, <&lsm>, <&routing>, <&compr>;
|
||
|
|
asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
|
||
|
|
"msm-pcm-dsp.2", "msm-voip-dsp",
|
||
|
|
"msm-pcm-voice", "msm-pcm-loopback",
|
||
|
|
"msm-compress-dsp", "msm-pcm-hostless",
|
||
|
|
"msm-pcm-afe", "msm-lsm-client",
|
||
|
|
"msm-pcm-routing", "msm-compr-dsp";
|
||
|
|
asoc-cpu = <&dai_pri_auxpcm>, <&dai_sec_auxpcm>, <&dai_hdmi>,
|
||
|
|
<&dai_mi2s>, <&dai_mi2s_quat>,
|
||
|
|
<&afe_pcm_rx>, <&afe_pcm_tx>,
|
||
|
|
<&afe_proxy_rx>, <&afe_proxy_tx>,
|
||
|
|
<&incall_record_rx>, <&incall_record_tx>,
|
||
|
|
<&incall_music_rx>, <&incall_music2_rx>,
|
||
|
|
<&dai_tert_tdm_rx_0>, <&dai_tert_tdm_rx_1>,
|
||
|
|
<&dai_tert_tdm_rx_2>, <&dai_tert_tdm_rx_3>,
|
||
|
|
<&dai_tert_tdm_tx_0>, <&dai_tert_tdm_tx_1>,
|
||
|
|
<&dai_tert_tdm_tx_2>, <&dai_tert_tdm_tx_3>,
|
||
|
|
<&dai_quat_tdm_rx_0>, <&dai_quat_tdm_rx_1>,
|
||
|
|
<&dai_quat_tdm_rx_2>, <&dai_quat_tdm_rx_3>,
|
||
|
|
<&dai_quat_tdm_tx_0>, <&dai_quat_tdm_tx_1>,
|
||
|
|
<&dai_quat_tdm_tx_2>, <&dai_quat_tdm_tx_3>;
|
||
|
|
asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-auxpcm.2",
|
||
|
|
"msm-dai-q6-hdmi.8",
|
||
|
|
"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
|
||
|
|
"msm-dai-q6-dev.224", "msm-dai-q6-dev.225",
|
||
|
|
"msm-dai-q6-dev.241", "msm-dai-q6-dev.240",
|
||
|
|
"msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772",
|
||
|
|
"msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770",
|
||
|
|
"msm-dai-q6-tdm.36896", "msm-dai-q6-tdm.36898",
|
||
|
|
"msm-dai-q6-tdm.36900", "msm-dai-q6-tdm.36902",
|
||
|
|
"msm-dai-q6-tdm.36897", "msm-dai-q6-tdm.36899",
|
||
|
|
"msm-dai-q6-tdm.36901", "msm-dai-q6-tdm.36903",
|
||
|
|
"msm-dai-q6-tdm.36912", "msm-dai-q6-tdm.36914",
|
||
|
|
"msm-dai-q6-tdm.36916", "msm-dai-q6-tdm.36918",
|
||
|
|
"msm-dai-q6-tdm.36913", "msm-dai-q6-tdm.36915",
|
||
|
|
"msm-dai-q6-tdm.36917", "msm-dai-q6-tdm.36919";
|
||
|
|
asoc-codec = <&stub_codec>;
|
||
|
|
asoc-codec-names = "msm-stub-codec.1";
|
||
|
|
};
|
||
|
|
|
||
|
|
usb_detect {
|
||
|
|
compatible = "qcom,gpio-usbdetect";
|
||
|
|
interrupt-parent = <&spmi_bus>;
|
||
|
|
interrupts = <0x0 0xd0 0x0>; /* PM8994 GPIO17 */
|
||
|
|
interrupt-names = "vbus_det_irq";
|
||
|
|
};
|
||
|
|
|
||
|
|
qcom,msm-dai-mi2s {
|
||
|
|
dai_mi2s_quat: qcom,msm-dai-q6-mi2s-quat {
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active>;
|
||
|
|
pinctrl-1 = <&quat_mi2s_sleep &quat_mi2s_sd0_sleep>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
qcom,msm-dai-tdm-quat-rx {
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&quat_tdm_dout_active>;
|
||
|
|
pinctrl-1 = <&quat_tdm_dout_sleep>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_gpios {
|
||
|
|
gpio@c600 { /* GPIO 7 - NFC DWL REQ */
|
||
|
|
qcom,mode = <1>;
|
||
|
|
qcom,output-type = <0>;
|
||
|
|
qcom,pull = <5>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,out-strength = <3>;
|
||
|
|
qcom,src-sel = <0>;
|
||
|
|
qcom,master-en = <1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c700 { /* GPIO 8 - WLAN_EN */
|
||
|
|
qcom,mode = <1>; /* Digital output*/
|
||
|
|
qcom,pull = <4>; /* Pulldown 10uA */
|
||
|
|
qcom,vin-sel = <2>; /* VIN2 */
|
||
|
|
qcom,src-sel = <0>; /* GPIO */
|
||
|
|
qcom,invert = <0>; /* Invert */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c800 { /* GPIO 9 - Rome 3.3V control */
|
||
|
|
qcom,mode = <1>; /* Digital output */
|
||
|
|
qcom,output-type = <0>; /* MOS logic */
|
||
|
|
qcom,invert = <1>; /* Output high */
|
||
|
|
qcom,vin-sel = <0>; /* VPH_PWR */
|
||
|
|
qcom,src-sel = <0>; /* Constant */
|
||
|
|
qcom,out-strength = <1>; /* High drive strength */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c900 { /* GPIO 10 - NFC CLK _REQ*/
|
||
|
|
qcom,mode = <0>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,src-sel = <0>;
|
||
|
|
qcom,master-en = <1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@cd00 { /* GPIO 14 - lcd_bklt_reg_en */
|
||
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
||
|
|
qcom,output-type = <0>; /* CMOS logic */
|
||
|
|
qcom,invert = <1>; /* output hight initially */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
||
|
|
qcom,src-sel = <0>; /* CONSTANT */
|
||
|
|
qcom,out-strength = <1>; /* Low drive strength */
|
||
|
|
qcom,master-en = <1>; /* ENABLE GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
gpio@c100 { /* GPIO 2 */
|
||
|
|
qcom,mode = <0>;
|
||
|
|
qcom,pull = <0>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,src-sel = <0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c300 { /* GPIO 4 */
|
||
|
|
qcom,mode = <0>;
|
||
|
|
qcom,pull = <0>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,src-sel = <0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c400 { /* GPIO 5 */
|
||
|
|
qcom,mode = <0>;
|
||
|
|
qcom,pull = <0>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,src-sel = <0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@ca00 { /* GPIO 11 - USB enb1 (otg switch) */
|
||
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
||
|
|
qcom,src-sel = <0>; /* GPIO */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@cc00 { /* GPIO 13 - HPH_EN0 */
|
||
|
|
qcom,mode = <1>;
|
||
|
|
qcom,output-type = <0>;
|
||
|
|
qcom,pull = <5>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,out-strength = <1>;
|
||
|
|
qcom,src-sel = <2>;
|
||
|
|
qcom,master-en = <1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@ce00 { /* GPIO 15 */
|
||
|
|
qcom,mode = <1>;
|
||
|
|
qcom,output-type = <0>;
|
||
|
|
qcom,pull = <5>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,out-strength = <1>;
|
||
|
|
qcom,src-sel = <2>;
|
||
|
|
qcom,master-en = <1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@d000 { /* GPIO 17 - USB1 VBUS detect */
|
||
|
|
qcom,mode = <0>; /* Digital Input*/
|
||
|
|
qcom,pull = <5>; /* No pull */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 V */
|
||
|
|
qcom,src-sel = <0>; /* GPIO */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@d100 { /* GPIO 18 - Rome Sleep Clock */
|
||
|
|
qcom,mode = <1>; /* Digital output */
|
||
|
|
qcom,output-type = <0>; /* CMOS logic */
|
||
|
|
qcom,invert = <0>; /* Output low initially */
|
||
|
|
qcom,vin-sel = <2>; /* VIN 2 */
|
||
|
|
qcom,src-sel = <3>; /* Function 2 */
|
||
|
|
qcom,out-strength = <2>; /* Medium */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@d200 { /* GPIO 19 - Rome BT Reset */
|
||
|
|
qcom,mode = <1>; /* Digital output*/
|
||
|
|
qcom,pull = <4>; /* Pulldown 10uA */
|
||
|
|
qcom,vin-sel = <2>; /* VIN2 */
|
||
|
|
qcom,src-sel = <0>; /* GPIO */
|
||
|
|
qcom,invert = <0>; /* Invert */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb2s {
|
||
|
|
status = "ok";
|
||
|
|
dwc3@7600000 {
|
||
|
|
dr_mode = "host";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb3 {
|
||
|
|
interrupt-parent = <&usb3>;
|
||
|
|
interrupts = <0 1 2>;
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
interrupt-map-mask = <0x0 0xffffffff>;
|
||
|
|
interrupt-map = <0x0 0 &intc 0 133 0
|
||
|
|
0x0 1 &intc 0 180 0
|
||
|
|
0x0 2 &spmi_bus 0x0 0x0 0x9 0x0>;
|
||
|
|
interrupt-names = "hs_phy_irq", "pwr_event_irq", "pmic_id_irq";
|
||
|
|
|
||
|
|
vbus_dwc3-supply = <&usb_otg_switch>;
|
||
|
|
vdda33-supply = <&pm8994_l24>;
|
||
|
|
vdda18-supply = <&pm8994_l12>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp1_uart2 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c_6 {
|
||
|
|
at24@51 {
|
||
|
|
compatible = "atmel,24c32";
|
||
|
|
reg = <0x51>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c_7 {
|
||
|
|
silabs4705@11 { /* SiLabs FM chip, slave id 0x11*/
|
||
|
|
status = "ok";
|
||
|
|
compatible = "silabs,si4705";
|
||
|
|
reg = <0x11>;
|
||
|
|
vdd-supply = <&pm8994_s4>;
|
||
|
|
silabs,vdd-supply-voltage = <1800000 1800000>;
|
||
|
|
va-supply = <&rome_vreg>;
|
||
|
|
silabs,va-supply-voltage = <3300000 3300000>;
|
||
|
|
pinctrl-names = "pmx_fm_active","pmx_fm_suspend";
|
||
|
|
pinctrl-0 = <&fm_int_active &fm_status_int_active
|
||
|
|
&fm_rst_active>;
|
||
|
|
pinctrl-1 = <&fm_int_suspend &fm_status_int_suspend
|
||
|
|
&fm_rst_suspend>;
|
||
|
|
silabs,reset-gpio = <&tlmm 39 0>;
|
||
|
|
silabs,int-gpio = <&tlmm 38 0>;
|
||
|
|
silabs,status-gpio = <&tlmm 78 0>;
|
||
|
|
#address-cells = <0>;
|
||
|
|
interrupts = <0 1>;
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
interrupt-map-mask = <0xffffffff>;
|
||
|
|
interrupt-map = <
|
||
|
|
0 &tlmm 38 2
|
||
|
|
1 &tlmm 78 1
|
||
|
|
>;
|
||
|
|
interrupt-names = "silabs_fm_int", "silabs_fm_status_int";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c_8 { /* BLSP2 QUP2 */
|
||
|
|
nq@28 {
|
||
|
|
compatible = "qcom,nq-nci";
|
||
|
|
reg = <0x28>;
|
||
|
|
qcom,nq-irq = <&tlmm 9 0x00>;
|
||
|
|
qcom,nq-ven = <&tlmm 12 0x00>;
|
||
|
|
qcom,nq-firm = <&pm8994_gpios 7 0x00>;
|
||
|
|
qcom,nq-clkreq = <&pm8994_gpios 10 0x00>;
|
||
|
|
interrupt-parent = <&tlmm>;
|
||
|
|
qcom,clk-src = "BBCLK2";
|
||
|
|
interrupts = <9 0>;
|
||
|
|
interrupt-names = "nfc_irq";
|
||
|
|
pinctrl-names = "nfc_active", "nfc_suspend";
|
||
|
|
pinctrl-0 = <&nfc_int_active &nfc_disable_active>;
|
||
|
|
pinctrl-1 = <&nfc_int_suspend &nfc_disable_suspend>;
|
||
|
|
clocks = <&clock_gcc clk_bb_clk2_pin>;
|
||
|
|
clock-names = "ref_clk";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_dual_jdi_video {
|
||
|
|
/delete-property/ pwms;
|
||
|
|
/delete-property/ qcom,5v-boost-gpio;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_dual_jdi_cmd {
|
||
|
|
/delete-property/ pwms;
|
||
|
|
/delete-property/ qcom,5v-boost-gpio;
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi_dual_jdi_4k_nofbc_video {
|
||
|
|
/delete-property/ pwms;
|
||
|
|
};
|
||
|
|
|
||
|
|
&soc {
|
||
|
|
sound-9335 {
|
||
|
|
/delete-property/ qcom,hph-en1-gpio;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/delete-node/ &led_flash0;
|
||
|
|
|
||
|
|
&mdss_dsi0 {
|
||
|
|
/delete-property/ lab-supply;
|
||
|
|
/delete-property/ ibb-supply;
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss_dsi1 {
|
||
|
|
/delete-property/ lab-supply;
|
||
|
|
/delete-property/ ibb-supply;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cci {
|
||
|
|
qcom,camera@0 {
|
||
|
|
/delete-property/ qcom,led-flash-src;
|
||
|
|
};
|
||
|
|
|
||
|
|
qcom,camera@1 {
|
||
|
|
/delete-property/ cam_vana-supply;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_otg_switch {
|
||
|
|
gpio = <&pm8994_gpios 11 0>;
|
||
|
|
enable-active-high;
|
||
|
|
status = "ok";
|
||
|
|
/delete-property/ vin-supply;
|
||
|
|
};
|
||
|
|
|
||
|
|
&wsa881x_211 {
|
||
|
|
/delete-property/ qcom,spkr-sd-n-gpio;
|
||
|
|
};
|
||
|
|
|
||
|
|
&wsa881x_212 {
|
||
|
|
/delete-property/ qcom,spkr-sd-n-gpio;
|
||
|
|
};
|
||
|
|
|
||
|
|
&wsa881x_213 {
|
||
|
|
/delete-property/ qcom,spkr-sd-n-gpio;
|
||
|
|
};
|
||
|
|
|
||
|
|
&wsa881x_214 {
|
||
|
|
/delete-property/ qcom,spkr-sd-n-gpio;
|
||
|
|
};
|
||
|
|
|
||
|
|
&spi_9 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&spi_10 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp1_uart2 {
|
||
|
|
status = "ok";
|
||
|
|
};
|