M7350/kernel/Documentation/devicetree/bindings/spmi/msm-spmi.txt

* SPMI

The SPMI Device Tree support interprets up to three levels of Device Tree
topology. The first level is required and specifies only a slave address.
The second level is optional and allows for the specification of different
device nodes within the same 16-bit address space underneath a particular
SPMI slave ID. Within the second level, any number of address ranges can be
associated with a particular device within that 16-bit range. An additional
flag allows for the possiblity to specify that all device nodes should
have their resources dedicated to only one spmi_device. This flag can
be specified at the second level, or an optional third level. By default
without this flag, one spmi_device is created for each device_node.

[Root Node]

Recommended properties :
 - interrupt-controller : Used to specify the root node as the
   interrupt controller for SPMI devices.
 - #interrupt-cells : The number of cells used to express one interrupt.

Notes :
 - It is considered an error to include either spmi-container-dev or
 spmi-slave-dev in the Root Node.

[First Level Nodes]

Required properites :

 - reg: SPMI Slave ID (0-15) with no size cell.
 - compatible : "qcom," prefixed string to match against the driver.

Recommended properties :

 - interrupts : <a b c> where a is the slave ID, b is the peripheral ID,
   c is the device interrupt number (0-7). Each device supports any arbitrary
   number of interrupts.
 - interrupt-parent : the phandle for the interrupt controller that
   services interrupts for this device.
 - reg-names : a list of strings that map in order to the list of addresses
   specified above in the 'reg' property.
 - interrupt-names : a list of strings that map in order to the list of
   interrupts specified in the 'interrupts' property.

[Second Level Nodes]

Required properties :
 - spmi-slave-container: Used by the parser to understand that this is the
   second level of the tree that includes device nodes associated with the
   same slave_id.
 - reg: <a b> where a is < 65536 and b is a size. Each device supports an
   arbitrary number of address ranges.
 - compatible : "qcom," prefixed string to match against the driver.

Recommended properties :

 - interrupts : <a b c> where a is the slave ID, b is the peripheral ID,
   c is the device interrupt number (0-7). Each device supports any arbitrary
   number of interrupts.
 - interrupt-parent : the phandle for the interrupt controller that
   services interrupts for this device.

Optional properties :

 - spmi-dev-container: This specifies that all the device nodes specified for
   this slave_id should have their resources coalesced into only one
   spmi_device.
 - reg-names : a list of strings that map in order to the list of addresses
   specified above in the 'reg' property.
 - interrupt-names : a list of strings that map in order to the list of
   interrupts specified in the 'interrupts' property.

[Third Level Nodes]

Required properties :

  - spmi-dev-container: This specifies that all the device nodes specified for
   this slave_id should have their resources coalesced into only one
   spmi_device.
  - reg: <a b> where a is < 65536 and b is a size. Each device supports an
   arbitrary number of address ranges.
  - compatible : "qcom," prefixed string to match against the driver.

Recommended properties :

 - interrupts : <a b c> where a is the slave ID, b is the peripheral ID,
   c is the device interrupt number (0-7). Each device supports any arbitrary
   number of interrupts.
 - interrupt-parent : the phandle for the interrupt controller that
   services interrupts for this device.
 - reg-names : a list of strings that map in order to the list of addresses
   specified above in the 'reg' property.
 - interrupt-names : a list of strings that map in order to the list of
   interrupts specified in the 'interrupts' property.
 - label: A single name that names the device. This name can be looked up
   with spmi_get_node_byname(). This is mostly useful in spmi-dev-container
   configurations where multiple device_nodes are associated with one spmi
   device.
Notes :
 - It is considered an error to include spmi-slave-dev at this level.

[Example]

/ {
	qpnp: qcom,spmi@fc4c0000 {
		#address-cells = <1>;
		#size-cells = <0>;
		interrupt-controller;
		#interrupt-cells = <3>;

		testint@f {
			interrupt-parent = <&qpnp>;
			compatible = "qcom,qpnp-testint";
			reg = <0xf>;
			interrupts = <0x3 0x15 0x0 0x3 0x15 0x02 0x1 0x47 0x0>;
			interrupt-names = "testint_0", "testint_1", "testint_err";
		};

		pm8941@0 {
			spmi-slave-container;
			reg = <0x0>;
			#address-cells = <1>;
			#size-cells = <1>;

			pm8941_gpios: gpios {
				spmi-dev-container;
				compatible = "qcom,qpnp-pin";
				gpio-controller;
				#gpio-cells = <1>;
				#address-cells = <1>;
				#size-cells = <1>;

				pm8941_gpio1@0xc000 {
					compatible = "qcom,qpnp-pin";
					reg = <0xc000 0x100>;
					qcom,qpnp_gpio = <1>;
					interrupt-parent = <&qpnp>;
					interrupts = <0x3 0x15 0x02 0x1 0x47 0x0>;
					label = "foo-dev";
				};

				pm8941_gpio2@0xc100 {
					compatible = "qcom,qpnp-pin";
					reg = <0xc100 0x100>;
					qcom,qpnp_gpio = <2>;
					interrupt-parent = <&qpnp>;
					interrupts = <0x3 0x15 0x0>;
				};
			};

			testgpio@0x1000 {
				compatible = "qcom,qpnp-testgpio";
				reg = <0x1000 0x1000 0x2000 0x1000>;
				reg-names = "foo", "bar";
				qpnp-gpios = <&pm8941_gpios 0x0>;
			};
		};
		pm8841@2 {
			spmi-slave-container;
			reg = <0x2>;
			#address-cells = <1>;
			#size-cells = <1>;
			spmi-dev-container;
			compatible = "qcom,qpnp-pin";

			pm8841_gpio1@0xc000 {
				reg = <0xc000 0x100>;
				qcom,qpnp_gpio = <1>;
			};

			pm8841_gpio2@0xc100 {
				reg = <0xc100 0x100>;
				qcom,qpnp_gpio = <2>;
			};
		};

	};
};