2024-09-09 08:52:07 +00:00
|
|
|
taiko audio CODEC
|
|
|
|
|
|
|
|
|
|
Required properties:
|
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
- compatible : "qcom,taiko-slim-pgd" or "qcom,tapan-slim-pgd" for Tapan codec
|
|
|
|
|
or "qcom,tomtom-slim-pgd" for the Tomtom codec
|
|
|
|
|
or "qcom,tasha-slim-pgd" or "qcom,tasha-i2c-pgd" for Tasha Codec
|
2024-09-09 08:52:07 +00:00
|
|
|
- elemental-addr: codec slimbus slave PGD enumeration address.(48 bits)
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-reset-gpio: gpio used for codec SOC reset.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-buck-supply: phandle of buck supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-buck-voltage: buck supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-buck-current: buck supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-tx-h-supply: phandle of tx-h supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-tx-h-voltage: tx-h supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-tx-h-current: tx-h supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-rx-h-supply: phandle of rx-h supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-rx-h-voltage: rx-h supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-rx-h-current: rx-h supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vddpx-1-supply: phandle of px-1 supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vddpx-1-voltage: px-1 supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vddpx-1-current: px-1 supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-a-1p2v-supply: phandle of 1.2v supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-a-1p2v-voltage: 1.2v supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-a-1p2v-current: 1.2v supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vddcx-1-supply: phandle of cx-1 supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vddcx-1-voltage: cx-1 supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vddcx-1-current: cx-1 supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vddcx-2-supply: phandle of cx-2 supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vddcx-2-voltage: cx-2 supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vddcx-2-current: cx-2 supply's max current in mA.
|
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
- cdc-vdd-buckhelper-supply: phandle of helper regulator supply's
|
|
|
|
|
device tree node. This supply is a helper regulator for
|
|
|
|
|
cdc-vdd-buck-supply regulator.
|
|
|
|
|
- cdc-vdd-buckhelper-voltage: helper supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-buckhelper-current: helper supply's max current in mA.
|
|
|
|
|
|
2024-09-09 08:52:07 +00:00
|
|
|
- qcom,cdc-static-supplies: List of supplies to be enabled prior to codec
|
|
|
|
|
hardware probe. Supplies in this list will be
|
|
|
|
|
stay enabled.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias-ldoh-v - LDOH output in volts (should be 1.95 V and 3.00 V).
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias-cfilt1-mv - cfilt1 output voltage in milli volts.
|
|
|
|
|
- qcom,cdc-micbias-cfilt2-mv - cfilt2 output voltage in milli volts.
|
|
|
|
|
- qcom,cdc-micbias-cfilt3-mv - cfilt3 output voltage in milli volts.
|
|
|
|
|
cfilt voltage can be set to max of qcom,cdc-micbias-ldoh-v - 0.15V.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias1-cfilt-sel = cfilt to use for micbias1
|
|
|
|
|
(should be from 1 to 3).
|
|
|
|
|
- qcom,cdc-micbias2-cfilt-sel = cfilt to use for micbias2
|
|
|
|
|
(should be from 1 to 3).
|
|
|
|
|
- qcom,cdc-micbias3-cfilt-sel = cfilt to use for micbias3
|
|
|
|
|
(should be from 1 to 3).
|
|
|
|
|
- qcom,cdc-micbias4-cfilt-sel = cfilt to use for micbias4
|
|
|
|
|
(should be from 1 to 3).
|
|
|
|
|
This value represents the connected CFLIT to MIC Bias.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias1-ext-cap: Boolean. Enable micbias 1 external capacitor mode.
|
|
|
|
|
- qcom,cdc-micbias2-ext-cap: Boolean. Enable micbias 2 external capacitor mode.
|
|
|
|
|
- qcom,cdc-micbias3-ext-cap: Boolean. Enable micbias 3 external capacitor mode.
|
|
|
|
|
- qcom,cdc-micbias4-ext-cap: Boolean. Enable micbias 4 external capacitor mode.
|
|
|
|
|
- qcom,cdc-mclk-clk-rate - Specifies the master clock rate in Hz required for
|
|
|
|
|
codec.
|
|
|
|
|
- qcom,cdc-slim-ifd-dev - namme of the codec slim interface device.
|
|
|
|
|
- qcom,cdc-slim-ifd-elemental-addr - codec slimbus slave interface device
|
|
|
|
|
enumeration address.
|
|
|
|
|
|
|
|
|
|
Optional properties:
|
|
|
|
|
- cdc-dmic-sample-rate: Specifies the sample rate of digital mic in HZ. The
|
|
|
|
|
values for 9.6MHZ mclk can be 2400000 Hz, 3200000 Hz
|
|
|
|
|
and 4800000 Hz. The values for 12.288MHz mclk can be
|
|
|
|
|
3072200 Hz, 4096000 Hz and 6144000 Hz.
|
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
- qcom,cdc-mad-dmic-rate: Specifies the sample rate of digital mic in HZ to be
|
|
|
|
|
used by MAD (Microphone Activity Detection) hardware
|
|
|
|
|
block on the codec. The valid set of values are same
|
|
|
|
|
as that of cdc-dmic-sample-rate, but this rate will
|
|
|
|
|
only be used by MAD and all other audio use cases
|
|
|
|
|
involving DMIC will use the rate defined by
|
|
|
|
|
cdc-dmic-sample-rate.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-dmic-clk-drv-strength: Specifies the drive strength for digital microphone
|
|
|
|
|
clock in the codec. Accepted values are 2,4,8 and 16.
|
|
|
|
|
The clock drive strentgh is in uA. Codec driver will
|
|
|
|
|
choose default value for particular codec if this
|
|
|
|
|
value is not specified in device tree.
|
|
|
|
|
|
2024-09-09 08:52:07 +00:00
|
|
|
- qcom,cdc-on-demand-supplies: List of supplies which can be enabled
|
|
|
|
|
dynamically.
|
|
|
|
|
Supplies in this list are off by default.
|
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
- qcom,cdc-cp-supplies: List of supplies required for codec chargepump enable
|
|
|
|
|
Supplies in this list can be enabled/disabled dynamically and
|
|
|
|
|
are off by default.
|
|
|
|
|
|
2024-09-09 08:52:07 +00:00
|
|
|
- qcom,cdc-micbias2-headset-only: Boolean. Allow micbias 2 only to headset mic.
|
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
- qcom,cdc-variant: Indicates codec variant, WCD9XXX indicates all codecs till Taiko
|
|
|
|
|
WCD9330 indicates wcd9330 audio codec
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias1-mv: micbias1 output voltage in milli volts.
|
|
|
|
|
This is used when cfilt is not user configurable
|
|
|
|
|
and micbias1 is directly controlled with a register
|
|
|
|
|
write.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias2-mv: micbias2 output voltage in milli volts.
|
|
|
|
|
This is used when cfilt is not user configurable
|
|
|
|
|
and micbias2 is directly controlled with a register
|
|
|
|
|
write.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias3-mv: micbias3 output voltage in milli volts.
|
|
|
|
|
This is used when cfilt is not user configurable
|
|
|
|
|
and micbias3 is directly controlled with a register
|
|
|
|
|
write.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias4-mv: micbias4 output voltage in milli volts.
|
|
|
|
|
This is used when cfilt is not user configurable
|
|
|
|
|
and micbias4 is directly controlled with a register
|
|
|
|
|
write.
|
|
|
|
|
|
|
|
|
|
- clock-names : clock name defined for external clock.
|
|
|
|
|
- clocks : external clock defined for codec clock.
|
|
|
|
|
|
2024-09-09 08:52:07 +00:00
|
|
|
Example:
|
|
|
|
|
|
|
|
|
|
taiko_codec {
|
|
|
|
|
compatible = "qcom,taiko-slim-pgd";
|
|
|
|
|
elemental-addr = [00 01 A0 00 17 02];
|
|
|
|
|
|
|
|
|
|
qcom,cdc-reset-gpio = <&msmgpio 63 0>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-buck-supply = <&pm8941_s2>;
|
|
|
|
|
qcom,cdc-vdd-buck-voltage = <2150000 2150000>;
|
|
|
|
|
qcom,cdc-vdd-buck-current = <500000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-tx-h-supply = <&pm8941_s3>;
|
|
|
|
|
qcom,cdc-vdd-tx-h-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vdd-tx-h-current = <200000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-rx-h-supply = <&pm8941_s3>;
|
|
|
|
|
qcom,cdc-vdd-rx-h-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vdd-rx-h-current = <200000>;
|
|
|
|
|
|
|
|
|
|
cdc-vddpx-1-supply = <&pm8941_s3>;
|
|
|
|
|
qcom,cdc-vddpx-1-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vddpx-1-current = <5000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-a-1p2v-supply = <&pm8941_l1>;
|
|
|
|
|
qcom,cdc-vdd-a-1p2v-voltage = <1225000 1225000>;
|
|
|
|
|
qcom,cdc-vdd-a-1p2v-current = <5000>;
|
|
|
|
|
|
|
|
|
|
cdc-vddcx-1-supply = <&pm8941_l1>;
|
|
|
|
|
qcom,cdc-vddcx-1-voltage = <1225000 1225000>;
|
|
|
|
|
qcom,cdc-vddcx-1-current = <5000>;
|
|
|
|
|
|
|
|
|
|
cdc-vddcx-2-supply = <&pm8941_l1>;
|
|
|
|
|
qcom,cdc-vddcx-2-voltage = <1225000 1225000>;
|
|
|
|
|
qcom,cdc-vddcx-2-current = <5000>;
|
|
|
|
|
|
|
|
|
|
qcom,cdc-static-supplies = "cdc-vdd-buck",
|
|
|
|
|
"cdc-vdd-tx-h",
|
|
|
|
|
"cdc-vdd-rx-h",
|
|
|
|
|
"cdc-vddpx-1",
|
|
|
|
|
"cdc-vdd-a-1p2v",
|
|
|
|
|
"cdc-vddcx-1",
|
|
|
|
|
"cdc-vddcx-2";
|
|
|
|
|
|
|
|
|
|
com,cdc-on-demand-supplies = "cdc-vdd-spkdrv";
|
|
|
|
|
|
|
|
|
|
qcom,cdc-micbias-ldoh-v = <0x3>;
|
|
|
|
|
qcom,cdc-micbias-cfilt1-mv = <1800>;
|
|
|
|
|
qcom,cdc-micbias-cfilt2-mv = <2700>;
|
|
|
|
|
qcom,cdc-micbias-cfilt3-mv = <1800>;
|
|
|
|
|
qcom,cdc-micbias1-cfilt-sel = <0x0>;
|
|
|
|
|
qcom,cdc-micbias2-cfilt-sel = <0x1>;
|
|
|
|
|
qcom,cdc-micbias3-cfilt-sel = <0x2>;
|
|
|
|
|
qcom,cdc-micbias4-cfilt-sel = <0x2>;
|
|
|
|
|
qcom,cdc-micbias1-ext-cap;
|
|
|
|
|
qcom,cdc-micbias2-ext-cap;
|
|
|
|
|
qcom,cdc-micbias3-ext-cap;
|
|
|
|
|
qcom,cdc-micbias4-ext-cap;
|
|
|
|
|
qcom,cdc-mclk-clk-rate = <9600000>;
|
|
|
|
|
qcom,cdc-slim-ifd = "taiko-slim-ifd";
|
|
|
|
|
qcom,cdc-slim-ifd-elemental-addr = [00 00 A0 00 17 02];
|
|
|
|
|
qcom,cdc-dmic-sample-rate = <4800000>;
|
|
|
|
|
qcom,cdc-micbias2-headset-only;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
Wcd9xxx audio CODEC in I2C mode
|
|
|
|
|
|
|
|
|
|
- compatible = "qcom,wcd9xxx-i2c-device";
|
|
|
|
|
- reg: represents the slave address provided to the I2C driver.
|
|
|
|
|
- qcom,cdc-reset-gpio: gpio used for codec SOC reset.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-buck-supply: phandle of buck supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-buck-voltage: buck supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-buck-current: buck supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-tx-h-supply: phandle of tx-h supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-tx-h-voltage: tx-h supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-tx-h-current: tx-h supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-rx-h-supply: phandle of rx-h supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-rx-h-voltage: rx-h supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-rx-h-current: rx-h supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vddpx-1-supply: phandle of px-1 supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vddpx-1-voltage: px-1 supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vddpx-1-current: px-1 supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-a-1p2v-supply: phandle of 1.2v supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-a-1p2v-voltage: 1.2v supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-a-1p2v-current: 1.2v supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vddcx-1-supply: phandle of cx-1 supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vddcx-1-voltage: cx-1 supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vddcx-1-current: cx-1 supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vddcx-2-supply: phandle of cx-2 supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vddcx-2-voltage: cx-2 supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vddcx-2-current: cx-2 supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-static-supplies: List of supplies to be enabled prior to codec
|
|
|
|
|
hardware probe. Supplies in this list will be
|
|
|
|
|
stay enabled.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias-ldoh-v - LDOH output in volts (should be 1.95 V and 3.00 V).
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias-cfilt1-mv - cfilt1 output voltage in milli volts.
|
|
|
|
|
- qcom,cdc-micbias-cfilt2-mv - cfilt2 output voltage in milli volts.
|
|
|
|
|
- qcom,cdc-micbias-cfilt3-mv - cfilt3 output voltage in milli volts.
|
|
|
|
|
cfilt voltage can be set to max of qcom,cdc-micbias-ldoh-v - 0.15V.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias1-cfilt-sel = cfilt to use for micbias1
|
|
|
|
|
(should be from 1 to 3).
|
|
|
|
|
- qcom,cdc-micbias2-cfilt-sel = cfilt to use for micbias2
|
|
|
|
|
(should be from 1 to 3).
|
|
|
|
|
- qcom,cdc-micbias3-cfilt-sel = cfilt to use for micbias3
|
|
|
|
|
(should be from 1 to 3).
|
|
|
|
|
- qcom,cdc-micbias4-cfilt-sel = cfilt to use for micbias4
|
|
|
|
|
(should be from 1 to 3).
|
|
|
|
|
This value represents the connected CFLIT to MIC Bias.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias1-ext-cap: Boolean. Enable micbias 1 external capacitor mode.
|
|
|
|
|
- qcom,cdc-micbias2-ext-cap: Boolean. Enable micbias 2 external capacitor mode.
|
|
|
|
|
- qcom,cdc-micbias3-ext-cap: Boolean. Enable micbias 3 external capacitor mode.
|
|
|
|
|
- qcom,cdc-micbias4-ext-cap: Boolean. Enable micbias 4 external capacitor mode.
|
|
|
|
|
- qcom,cdc-mclk-clk-rate - Specifies the master clock rate in Hz required for
|
|
|
|
|
codec.
|
|
|
|
|
|
|
|
|
|
Optional properties:
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-spkdrv-supply: phandle of spkdrv supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-spkdrv-voltage: spkdrv supply voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-spkdrv-current: spkdrv supply max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-spkdrv-supply: phandle of spkdrv supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-spkdrv-voltage: spkdrv supply voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-spkdrv-current: spkdrv supply max current in mA.
|
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
- cdc-vdd-spkdrv-2-supply: phandle of spkdrv2 supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-spkdrv-2-voltage: spkdrv2 supply voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-spkdrv-2-current: spkdrv2 supply max current in mA.
|
|
|
|
|
|
2024-09-09 08:52:07 +00:00
|
|
|
- qcom,cdc-on-demand-supplies: List of supplies which can be enabled
|
|
|
|
|
dynamically.
|
|
|
|
|
Supplies in this list are off by default.
|
|
|
|
|
|
|
|
|
|
Example:
|
|
|
|
|
i2c@f9925000 {
|
|
|
|
|
cell-index = <3>;
|
|
|
|
|
compatible = "qcom,i2c-qup";
|
|
|
|
|
reg = <0xf9925000 0x1000>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
reg-names = "qup_phys_addr";
|
|
|
|
|
interrupts = <0 97 0>;
|
|
|
|
|
interrupt-names = "qup_err_intr";
|
|
|
|
|
qcom,i2c-bus-freq = <100000>;
|
|
|
|
|
qcom,i2c-src-freq = <24000000>;
|
|
|
|
|
|
|
|
|
|
wcd9xxx_codec@0d{
|
|
|
|
|
compatible = "qcom,wcd9xxx-i2c";
|
|
|
|
|
reg = <0x0d>;
|
|
|
|
|
qcom,cdc-reset-gpio = <&msmgpio 22 0>;
|
|
|
|
|
interrupt-parent = <&wcd9xxx_intc>;
|
|
|
|
|
interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
|
|
|
|
|
20 21 22 23 24 25 26 27 28>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-buck-supply = <&pm8019_l11>;
|
|
|
|
|
qcom,cdc-vdd-buck-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vdd-buck-current = <25000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-tx-h-supply = <&pm8019_l11>;
|
|
|
|
|
qcom,cdc-vdd-tx-h-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vdd-tx-h-current = <25000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-rx-h-supply = <&pm8019_l11>;
|
|
|
|
|
qcom,cdc-vdd-rx-h-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vdd-rx-h-current = <25000>;
|
|
|
|
|
|
|
|
|
|
cdc-vddpx-1-supply = <&pm8019_l11>;
|
|
|
|
|
qcom,cdc-vddpx-1-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vddpx-1-current = <10000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-a-1p2v-supply = <&pm8019_l9>;
|
|
|
|
|
qcom,cdc-vdd-a-1p2v-voltage = <1200000 1200000>;
|
|
|
|
|
qcom,cdc-vdd-a-1p2v-current = <10000>;
|
|
|
|
|
|
|
|
|
|
cdc-vddcx-1-supply = <&pm8019_l9>;
|
|
|
|
|
qcom,cdc-vddcx-1-voltage = <1200000 1200000>;
|
|
|
|
|
qcom,cdc-vddcx-1-current = <10000>;
|
|
|
|
|
|
|
|
|
|
cdc-vddcx-2-supply = <&pm8019_l9>;
|
|
|
|
|
qcom,cdc-vddcx-2-voltage = <1200000 1200000>;
|
|
|
|
|
qcom,cdc-vddcx-2-current = <10000>;
|
|
|
|
|
|
|
|
|
|
qcom,cdc-static-supplies = "cdc-vdd-buck",
|
|
|
|
|
"cdc-vdd-tx-h",
|
|
|
|
|
"cdc-vdd-rx-h",
|
|
|
|
|
"cdc-vddpx-1",
|
|
|
|
|
"cdc-vdd-a-1p2v",
|
|
|
|
|
"cdc-vddcx-1",
|
|
|
|
|
"cdc-vddcx-2";
|
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
cdc-vdd-spkdrv-supply = <&pmi8994_boost>;
|
|
|
|
|
qcom,cdc-vdd-spkdrv-voltage = <5000000 5000000>;
|
|
|
|
|
qcom,cdc-vdd-spkdrv-current = <600000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-spkdrv-2-supply = <&pmi8994_boost>;
|
|
|
|
|
qcom,cdc-vdd-spkdrv-2-voltage = <5000000 5000000>;
|
|
|
|
|
qcom,cdc-vdd-spkdrv-2-current = <600000>;
|
|
|
|
|
|
|
|
|
|
qcom,cdc-on-demand-supplies = "cdc-vdd-spkdrv",
|
|
|
|
|
"cdc-vdd-spkdrv-2";
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
|
qcom,cdc-micbias-ldoh-v = <0x3>;
|
|
|
|
|
qcom,cdc-micbias-cfilt1-mv = <1800>;
|
|
|
|
|
qcom,cdc-micbias-cfilt2-mv = <2700>;
|
|
|
|
|
qcom,cdc-micbias-cfilt3-mv = <1800>;
|
|
|
|
|
qcom,cdc-micbias1-cfilt-sel = <0x0>;
|
|
|
|
|
qcom,cdc-micbias2-cfilt-sel = <0x1>;
|
|
|
|
|
qcom,cdc-micbias3-cfilt-sel = <0x2>;
|
|
|
|
|
qcom,cdc-micbias4-cfilt-sel = <0x2>;
|
|
|
|
|
qcom,cdc-mclk-clk-rate = <12288000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
wcd9xxx_codec@77{
|
|
|
|
|
compatible = "qcom,wcd9xxx-i2c";
|
|
|
|
|
reg = <0x77>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
wcd9xxx_codec@66{
|
|
|
|
|
compatible = "qcom,wcd9xxx-i2c";
|
|
|
|
|
reg = <0x66>;
|
|
|
|
|
};
|
|
|
|
|
wcd9xxx_codec@55{
|
|
|
|
|
compatible = "qcom,wcd9xxx-i2c";
|
|
|
|
|
reg = <0x55>;
|
|
|
|
|
};
|
|
|
|
|
};
|
2024-09-09 08:57:42 +00:00
|
|
|
|
|
|
|
|
Tombak audio CODEC in SPMI mode
|
|
|
|
|
|
|
|
|
|
- compatible = "qcom,msm8x16_wcd_codec";
|
|
|
|
|
- reg: represents the slave base address provided to the peripheral.
|
|
|
|
|
- interrupt-parent : The parent interrupt controller.
|
|
|
|
|
- interrupts: List of interrupts in given SPMI peripheral.
|
|
|
|
|
- interrupt-names: Names specificed to above list of interrupts in same
|
|
|
|
|
order.
|
|
|
|
|
|
|
|
|
|
Optional properties:
|
|
|
|
|
|
|
|
|
|
- cdc-vdda-cp-supply: phandle of cp supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdda-cp-voltage: cp supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdda-cp-current: cp supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdda-rx-h-supply: phandle of vdda-rx-h supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdda-rx-h-voltage: vdda-rx-h supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdda-rx-h-current: vdda-rx-h supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdda-tx-h-supply: phandle of vdda-tx-h supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdda-tx-h-voltage: vdda-tx-h supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdda-tx-h-current: vdda-tx-h supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-px-supply: phandle of vdd-px supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-px-voltage: vdd-px supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-px-current: vdd-px supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-pa-supply: phandle of vdd-pa supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-pa-voltage: vdd-pa supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-pa-current: vdd-pa supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-mic-bias-supply: phandle of mic-bias supply's regulator device tree
|
|
|
|
|
node.
|
|
|
|
|
- qcom,cdc-vdd-mic-bias-voltage: mic-bias supply's voltage level min and max
|
|
|
|
|
in mV.
|
|
|
|
|
- qcom,cdc-vdd-mic-bias-current: mic-bias supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-mclk-clk-rate: Specifies the master clock rate in Hz required for
|
|
|
|
|
codec.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-static-supplies: List of supplies to be enabled prior to codec
|
|
|
|
|
hardware probe. Supplies in this list will be
|
|
|
|
|
stay enabled.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-on-demand-supplies: List of supplies which can be enabled
|
|
|
|
|
dynamically.
|
|
|
|
|
Supplies in this list are off by default.
|
|
|
|
|
- qcom,cdc-micbias-cfilt-mv : MICBIAS voltage value
|
|
|
|
|
- qcom,cdc-boost-voltage: Specifies the analog boost output voltage value.
|
|
|
|
|
Value from 4000 to 5550 in mV in steps of 50 mV can be given.
|
|
|
|
|
- qcom,dig-cdc-base-addr: Specifies the digital codec base address for MSM digital
|
|
|
|
|
core register writes.
|
|
|
|
|
|
|
|
|
|
Example:
|
|
|
|
|
msm8x16_wcd_codec@f000{
|
|
|
|
|
compatible = "qcom,msm8x16_wcd_codec";
|
|
|
|
|
reg = <0xf000 0x100>;
|
|
|
|
|
interrupt-parent = <&spmi_bus>;
|
|
|
|
|
interrupts = <0x1 0xf0 0x0>,
|
|
|
|
|
<0x1 0xf0 0x1>,
|
|
|
|
|
<0x1 0xf0 0x2>,
|
|
|
|
|
<0x1 0xf0 0x3>,
|
|
|
|
|
<0x1 0xf0 0x4>,
|
|
|
|
|
<0x1 0xf0 0x5>,
|
|
|
|
|
<0x1 0xf0 0x6>,
|
|
|
|
|
<0x1 0xf0 0x7>;
|
|
|
|
|
interrupt-names = "spk_cnp_int",
|
|
|
|
|
"spk_clip_int",
|
|
|
|
|
"spk_ocp_int",
|
|
|
|
|
"ins_rem_det1",
|
|
|
|
|
"but_rel_det",
|
|
|
|
|
"but_press_det",
|
|
|
|
|
"ins_rem_det",
|
|
|
|
|
"mbhc_int";
|
|
|
|
|
|
|
|
|
|
cdc-vdda-cp-supply = <&pm8916_s4>;
|
|
|
|
|
qcom,cdc-vdda-cp-voltage = <1800000 2200000>;
|
|
|
|
|
qcom,cdc-vdda-cp-current = <770000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdda-rx-h-supply = <&pm8916_l5>;
|
|
|
|
|
qcom,cdc-vdda-rx-h-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vdda-rx-h-current = <20000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdda-tx-h-supply = <&pm8916_l5>;
|
|
|
|
|
qcom,cdc-vdda-tx-h-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vdda-tx-h-current = <20000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-px-supply = <&pm8916_s4>;
|
|
|
|
|
qcom,cdc-vdd-px-voltage = <1800000 2200000>;
|
|
|
|
|
qcom,cdc-vdd-px-current = <770000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-pa-supply = <&pm8916_l5>;
|
|
|
|
|
qcom,cdc-vdd-pa-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vdd-pa-current = <5000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-mic-bias-supply = <&pm8916_l13>;
|
|
|
|
|
qcom,cdc-vdd-mic-bias-voltage = <3075000 3075000>;
|
|
|
|
|
qcom,cdc-vdd-mic-bias-current = <25000>;
|
|
|
|
|
|
|
|
|
|
qcom,cdc-mclk-clk-rate = <9600000>;
|
|
|
|
|
|
|
|
|
|
qcom,cdc-static-supplies = "cdc-vdda-h",
|
|
|
|
|
"cdc-vdd-px",
|
|
|
|
|
"cdc-vdd-pa",
|
|
|
|
|
"cdc-vdda-cp";
|
|
|
|
|
|
|
|
|
|
qcom,cdc-on-demand-supplies = "cdc-vdd-mic-bias";
|
|
|
|
|
qcom,dig-cdc-base-addr = <0xc0f0000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
Tasha audio CODEC in I2C mode
|
|
|
|
|
|
|
|
|
|
- compatible = "qcom,tasha-i2c-pgd";
|
|
|
|
|
- reg: represents the slave address provided to the I2C driver.
|
|
|
|
|
- qcom,cdc-reset-gpio: gpio used for codec SOC reset.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-buck-supply: phandle of buck supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-buck-voltage: buck supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-buck-current: buck supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-buck-sido-supply: phandle of sido supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-buck-sido-voltage = sido supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-buck-sido-current = sido supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-tx-h-supply: phandle of tx-h supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-tx-h-voltage: tx-h supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-tx-h-current: tx-h supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vdd-rx-h-supply: phandle of rx-h supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vdd-rx-h-voltage: rx-h supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vdd-rx-h-current: rx-h supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- cdc-vddpx-1-supply: phandle of px-1 supply's regulator device tree node.
|
|
|
|
|
- qcom,cdc-vddpx-1-voltage: px-1 supply's voltage level min and max in mV.
|
|
|
|
|
- qcom,cdc-vddpx-1-current: px-1 supply's max current in mA.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-static-supplies: List of supplies to be enabled prior to codec
|
|
|
|
|
hardware probe. Supplies in this list will be
|
|
|
|
|
stay enabled.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-micbias1-mv - micbias1 output voltage in milli volts.
|
|
|
|
|
- qcom,cdc-micbias2-mv - micbias2 output voltage in milli volts.
|
|
|
|
|
- qcom,cdc-micbias3-mv - micbias3 output voltage in milli volts.
|
|
|
|
|
- qcom,cdc-micbias4-mv - micbias4 output voltage in milli volts.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-mclk-clk-rate - Specifies the master clock rate in Hz required for
|
|
|
|
|
codec.
|
|
|
|
|
|
|
|
|
|
- qcom,cdc-dmic-sample-rate - Specifies dmic sample rate.
|
|
|
|
|
- qcom,cdc-variant - Specifies codec variant.
|
|
|
|
|
|
|
|
|
|
Example:
|
|
|
|
|
i2c_3: i2c@78B7000 { /* BLSP1 QUP3 */
|
|
|
|
|
compatible = "qcom,i2c-msm-v2";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
reg-names = "qup_phys_addr";
|
|
|
|
|
reg = <0x78B7000 0x600>;
|
|
|
|
|
interrupt-names = "qup_irq";
|
|
|
|
|
interrupts = <0 97 0>;
|
|
|
|
|
dmas = <&dma_blsp1 12 64 0x20000020 0x20>,
|
|
|
|
|
<&dma_blsp1 13 32 0x20000020 0x20>;
|
|
|
|
|
dma-names = "tx", "rx";
|
|
|
|
|
qcom,master-id = <86>;
|
|
|
|
|
qcom,clk-freq-out = <400000>;
|
|
|
|
|
qcom,clk-freq-in = <19200000>;
|
|
|
|
|
clock-names = "iface_clk", "core_clk";
|
|
|
|
|
clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,
|
|
|
|
|
<&clock_gcc clk_gcc_blsp1_qup3_i2c_apps_clk>;
|
|
|
|
|
pinctrl-names = "i2c_active", "i2c_sleep";
|
|
|
|
|
pinctrl-0 = <&i2c_3_active>;
|
|
|
|
|
pinctrl-1 = <&i2c_3_sleep>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
|
|
|
|
|
wcd9xxx_codec@d{
|
|
|
|
|
compatible = "qcom,tasha-i2c-pgd";
|
|
|
|
|
reg = <0x0d>;
|
|
|
|
|
|
|
|
|
|
interrupt-parent = <&wcd9xxx_intc>;
|
|
|
|
|
interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
|
|
|
|
|
17 18 19 20 21 22 23 24 25 26 27 28 29
|
|
|
|
|
30>;
|
|
|
|
|
|
|
|
|
|
qcom,cdc-reset-gpio = <&tlmm_pinmux 90 0>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-buck-supply = <&codec_buck_vreg>;
|
|
|
|
|
qcom,cdc-vdd-buck-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vdd-buck-current = <650000>;
|
|
|
|
|
|
|
|
|
|
cdc-buck-sido-supply = <&codec_buck_vreg>;
|
|
|
|
|
qcom,cdc-buck-sido-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-buck-sido-current = <200000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-tx-h-supply = <&pmdcalifornium_l6>;
|
|
|
|
|
qcom,cdc-vdd-tx-h-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vdd-tx-h-current = <25000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-rx-h-supply = <&pmdcalifornium_l6>;
|
|
|
|
|
qcom,cdc-vdd-rx-h-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vdd-rx-h-current = <25000>;
|
|
|
|
|
|
|
|
|
|
cdc-vddpx-1-supply = <&pmdcalifornium_l6>;
|
|
|
|
|
qcom,cdc-vddpx-1-voltage = <1800000 1800000>;
|
|
|
|
|
qcom,cdc-vddpx-1-current = <10000>;
|
|
|
|
|
|
|
|
|
|
qcom,cdc-static-supplies = "cdc-vdd-buck",
|
|
|
|
|
"cdc-buck-sido",
|
|
|
|
|
"cdc-vdd-tx-h",
|
|
|
|
|
"cdc-vdd-rx-h",
|
|
|
|
|
"cdc-vddpx-1";
|
|
|
|
|
|
|
|
|
|
qcom,cdc-micbias1-mv = <1800>;
|
|
|
|
|
qcom,cdc-micbias2-mv = <1800>;
|
|
|
|
|
qcom,cdc-micbias3-mv = <1800>;
|
|
|
|
|
qcom,cdc-micbias4-mv = <1800>;
|
|
|
|
|
qcom,cdc-mclk-clk-rate = <12288000>;
|
|
|
|
|
qcom,cdc-dmic-sample-rate = <4800000>;
|
|
|
|
|
|
|
|
|
|
swr_master {
|
|
|
|
|
compatible = "qcom,swr-wcd";
|
|
|
|
|
#address-cells = <2>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
wsa881x_1: wsa881x@20170212 {
|
|
|
|
|
compatible = "qcom,wsa881x";
|
|
|
|
|
reg = <0x00 0x20170212>;
|
|
|
|
|
qcom,spkr-sd-n-gpio = <&tlmm_pinmux 80 0>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-d-supply = <&pmdcalifornium_l6>;
|
|
|
|
|
qcom,cdc-vdd-d-voltage = <1800000
|
|
|
|
|
1800000>;
|
|
|
|
|
qcom,cdc-vdd-d-current = <2000>;
|
|
|
|
|
|
|
|
|
|
cdc-vdd-a-supply = <&pmdcalifornium_l6>;
|
|
|
|
|
qcom,cdc-vdd-a-voltage = <1800000
|
|
|
|
|
1800000>;
|
|
|
|
|
qcom,cdc-vdd-a-current = <2000>;
|
|
|
|
|
|
|
|
|
|
qcom,cdc-static-supplies = "cdc-vdd-d",
|
|
|
|
|
"cdc-vdd-a";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
