41 lines
1.8 KiB
Plaintext
41 lines
1.8 KiB
Plaintext
|
Capella cm36283 L/P sensor
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
|
||
|
|
- compatible : Should be "capella,cm36283" or "capella,cm36682".
|
||
|
|
- reg : i2c slave address of the device.
|
||
|
|
- interrupt-parent : Parent of interrupt.
|
||
|
|
- interrupts : L/P sample interrupt to indicate new data ready.
|
||
|
|
- vdd-supply : Power supply needed to power up the device.
|
||
|
|
- vio-supply : IO power supply needed for IO and I2C.
|
||
|
|
- capella,interrupt-gpio : The gpio pin for the interrupt.
|
||
|
|
- capella,levels : The adc value for light sensor to trigger different light level.
|
||
|
|
- capella,ps_close_thd_set : The threshold adc value for proximity sensor to trigger close interrupt.
|
||
|
|
- capella,ps_away_thd_set: The threshold adc value for proximity sensor to trigger away interrupt.
|
||
|
|
- capella,ls_cmd : The initial value to configure cm36283 ALS_CONF register.
|
||
|
|
- capella,ps_conf1_val : The initial value to configure cm36283 PS_CONF1 register.
|
||
|
|
- capella,ps_conf3_val : The initial value to configure cm36283 PS_CONF3 register.
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
|
||
|
|
- capella,use-polling : Property to specify if using polling instead of interrupt for adc value report.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
capella@60 {
|
||
|
|
compatible = "capella,cm36283";
|
||
|
|
reg = <0x60>;
|
||
|
|
interrupt-parent = <&msmgpio>;
|
||
|
|
interrupts = <80 0x2>;
|
||
|
|
vdd-supply = <&pm8110_l19>;
|
||
|
|
vio-supply = <&pm8110_l14>;
|
||
|
|
capella,use-polling;
|
||
|
|
capella,interrupt-gpio = <80>;
|
||
|
|
capella,levels = <0x0A 0xA0 0xE1 0x140 0x280 0x500 0xA28 0x16A8 0x1F40 0x2800>;
|
||
|
|
capella,ps_close_thd_set = <0xa>;
|
||
|
|
capella,ps_away_thd_set = <0x5>;
|
||
|
|
capella,ls_cmd = <0x44>; /* PS_IT=160ms, INT_PERS=2*/
|
||
|
|
capella,ps_conf1_val = <0x0006>; /*CM36283_PS_ITB_1_2 | CM36283_PS_DR_1_40| CM36283_PS_IT_1T | CM36283_PS_PERS_2 | CM36283_PS_RES_1*/
|
||
|
|
capella,ps_conf3_val = <0x3010>; /* CM36283_PS_MS_NORMAL | CM36283_PS_PROL_255 | CM36283_PS_SMART_PERS_ENABLE, */
|
||
|
|
};
|