M7350/kernel/drivers/oled/oled_s90319_pt.h

146 lines
4.4 KiB
C
Raw Normal View History

2024-09-09 08:52:07 +00:00
/*******************************************************************************
Copyright (C), 1996-2012, TP-LINK TECHNOLOGIES CO., LTD.
File name : oled_s90319_pt.h
Description : Driver for OLED S90319.
Author : xiongsizhe
History:
------------------------------
V0.1, 2014-03-30, xiongsizhe create file.
*******************************************************************************/
#ifndef __OLED_S90319_PT_H__
#define __OLED_S90319_PT_H__
typedef unsigned char uint8_t;
typedef signed char int8_t;
typedef int int32_t;
typedef unsigned int uint32_t;
#define ROW_NUM 128 /* 0~7 */
#define PAGE_NUM 128
#define COLUMN_NUM 128
#define ENABLE 1
#define DISABLE 0
#define COLUMN_NUM_EXP 7 /* 2^7 = 128 */
/*
* Four Formats:
* 1. CMD_CONTROL BYTE . CMD . CMD . CMD <EFBFBD><EFBFBD><EFBFBD><EFBFBD>
* 2. CMD_CONTROL BYTE . CMD . CMD_CONTROL_BYTE . CMD <EFBFBD><EFBFBD><EFBFBD><EFBFBD>
* 3. DAT_CONTROL BYTE . DATA . DATA . DATA <EFBFBD><EFBFBD><EFBFBD><EFBFBD>
* 4. DAT_CONTROL BYTE . DATA . DAT_CONTROL_BYTE . DATA <EFBFBD><EFBFBD><EFBFBD><EFBFBD>
*/
#define OLED_CONTROL_CMDS 0x00
#define OLED_CONTROL_CMD_PAIRS 0x80
#define OLED_CONTROL_DATAS 0x40
#define OLED_CONTROL_DATA_PAIRS 0xC0
/* SINGLE CMDS */
#define CMD_DUMMY_BYTE_ZERO 0x00
#define CMD_DUMMY_BYTE_FF 0xFF
#define CMD_GRAM_IGNORE(bit) (0xA4|(bit)) /* 0: No, 1: Yes */
#define CMD_DISPLAY_OFF_ON(bit) (0xAE|(bit)) /* v: 0|1 */
#define CMD_SCAN_DIRECTION_0_TO_N 0xC0
#define CMD_SCAN_DIRECTION_N_TO_0 0xC8
#define CMD_LOWER_COL_ADDR(addr) (0x00|(addr)) /* addr: 0~F */
#define CMD_HIGHER_COL_ADDR(addr) (0x10|(addr)) /* addr: 0~F */
#define CMD_SEGMENT_REMAP(dir) (0xA0|(dir)) /* dir:0 normal direction, dir:1 reverse direction */
#define CMD_START_LINE(line) (0x40|(line)) /* line: 0 ~ 63 */
#define CMD_NORMAL_REV_DISPLAY(bit) (0xA6|(bit)) /* bit:0 normal display, bit:1 reverse display */
#define CMD_HORIZONTAL_SCROLL(dir) (0x26|(dir)) /* 0: L->R, 1:R->L */
#define CMD_SCROLL_ENABLE(ena) (0x2E|(ena)) /* 0:Disable, 1:Enable */
/* DOUBLE CMDS */
#define CMD_DOUBLE_CLOCK_DIVIDE_RATIO 0xD5
#define CMD_DOUBLE_MULTIPLEX_RATIO 0xA8
#define CMD_DOUBLE_PRECHARGE_PERIOD 0xD9
#define CMD_DOUBLE_PADS_HW_CONFIG 0xDA /* Sequence: 0x02; Alternative: 0x12*/
#define CMD_DOUBLE_CONTRAST_CONTROL 0x81
#define CMD_DOUBLE_DISPLAY_OFFSET 0xD3 /* 0x00 ~ 3f */
#define CMD_DOUBLE_VCOM_HLEVEL 0xDB /* 0x00 ~ 0xff */
#define CMD_DOUBLE_SET_CHARGE_PUMP 0x8D /* Enable: 0x14, Disable: 0x10*/
#define CMD_DOUBLE_MEMORY_ADDRESSING_MODE 0x20 /* 00: Horizontal 01: Vertial 10: Page 11: Invalid*/
#define CMD_DOUBLE_FADE_BLINK_MODE 0x23 /* Fade out or blinking mode */
/* TRIPLE CMDS */
#define CMD_TRIPE_COLUMN_ADDRESS 0x21 /* 0~127, 0~127 */
#define CMD_TRIPE_PAGE_ADDRESS 0x22 /* 0~7, 0~7 */
#define OLED_MATREIAL_STANDARD_CONTRAST 0xAF
#define OLED_MATREIAL_LOW_CONTRAST 0x0F
#define OLED_SET_COL_CMD 0x2A
#define OLED_SET_ROW_CMD 0x2B
#define OLED_WRITE_DATA_CMD 0x2C
#define X_OFFSET 2
#define Y_OFFSET 3
uint8_t CMD_HORIZONTAL_SCROLL_ARRAY[] = {CMD_HORIZONTAL_SCROLL(0), CMD_HORIZONTAL_SCROLL(1)};
uint8_t CMD_BACKLIGHT_ARRAY[] = {
CMD_DISPLAY_OFF_ON(0), /* Backlight off */
CMD_DISPLAY_OFF_ON(1) /* Backlight oN */
};
/* set col command */
uint8_t oled_set_col_cmd[] = {
OLED_SET_COL_CMD,
};
/* set row command */
uint8_t oled_set_row_cmd[] = {
OLED_SET_ROW_CMD,
};
/* write data command */
uint8_t oled_write_data_cmd[] = {
OLED_WRITE_DATA_CMD,
};
/* set backlight command */
uint8_t oled_s90319_backlight_cmd[] = {
CMD_DISPLAY_OFF_ON(0)
};
/* panel on/off command */
uint8_t oled_s90319_panel_off_cmd[] = {
CMD_DISPLAY_OFF_ON(0), /* manual display on */
CMD_DOUBLE_SET_CHARGE_PUMP, 0x10 /* set charge pump enable*/
};
uint8_t oled_s90319_scroll_stop_cmd[] = {
CMD_SCROLL_ENABLE(0)
};
/* Fade out or blinking mode */
uint8_t oled_s90319_fade_blink_cmd[] = {
CMD_DOUBLE_FADE_BLINK_MODE,
0
};
/*
* fade_blink_parameter:
* A[5:4] = 00b Disable Fade Out / Blinking Mode
* A[5:4] = 10b Enable Fade Out mode
* A[5:4] = 11b Enable Blinking mode
* A[3:0] : Set time interval for each fade step, (8 * (A[3:0] + 1))frames
*/
struct oled_s90319_fade_blink_cmd_config_struct {
uint8_t *fade_blink_parameter;
};
uint8_t oled_s90319_set_col_addr[] = {
0x00, 0x00, 0x00, 0x00
};
uint8_t oled_s90319_set_row_addr[] = {
0x00, 0x00, 0x00, 0x00
};
#endif /* __OLED_S90319_PT__ */