2024-09-09 08:52:07 +00:00
|
|
|
/*******************************************************************************
|
|
|
|
|
|
|
|
Intel 10 Gigabit PCI Express Linux driver
|
2024-09-09 08:57:42 +00:00
|
|
|
Copyright(c) 1999 - 2014 Intel Corporation.
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
|
|
under the terms and conditions of the GNU General Public License,
|
|
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
|
|
more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
|
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
|
|
the file called "COPYING".
|
|
|
|
|
|
|
|
Contact Information:
|
2024-09-09 08:57:42 +00:00
|
|
|
Linux NICS <linux.nics@intel.com>
|
2024-09-09 08:52:07 +00:00
|
|
|
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|
|
|
|
|
|
*******************************************************************************/
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/in.h>
|
|
|
|
#include <linux/ip.h>
|
|
|
|
#include <linux/tcp.h>
|
|
|
|
#include <linux/ipv6.h>
|
2024-09-09 08:57:42 +00:00
|
|
|
#ifdef NETIF_F_HW_VLAN_CTAG_TX
|
2024-09-09 08:52:07 +00:00
|
|
|
#include <linux/if_vlan.h>
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#include "ixgbe.h"
|
|
|
|
#include "ixgbe_type.h"
|
|
|
|
#include "ixgbe_sriov.h"
|
|
|
|
|
|
|
|
#ifdef CONFIG_PCI_IOV
|
2024-09-09 08:57:42 +00:00
|
|
|
static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter)
|
2024-09-09 08:52:07 +00:00
|
|
|
{
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
int num_vf_macvlans, i;
|
|
|
|
struct vf_macvlans *mv_list;
|
|
|
|
|
|
|
|
adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
|
|
|
|
e_info(probe, "SR-IOV enabled with %d VFs\n", adapter->num_vfs);
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/* Enable VMDq flag so device will be set in VM mode */
|
|
|
|
adapter->flags |= IXGBE_FLAG_VMDQ_ENABLED;
|
|
|
|
if (!adapter->ring_feature[RING_F_VMDQ].limit)
|
|
|
|
adapter->ring_feature[RING_F_VMDQ].limit = 1;
|
|
|
|
adapter->ring_feature[RING_F_VMDQ].offset = adapter->num_vfs;
|
|
|
|
|
2024-09-09 08:52:07 +00:00
|
|
|
num_vf_macvlans = hw->mac.num_rar_entries -
|
|
|
|
(IXGBE_MAX_PF_MACVLANS + 1 + adapter->num_vfs);
|
|
|
|
|
|
|
|
adapter->mv_list = mv_list = kcalloc(num_vf_macvlans,
|
|
|
|
sizeof(struct vf_macvlans),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (mv_list) {
|
|
|
|
/* Initialize list of VF macvlans */
|
|
|
|
INIT_LIST_HEAD(&adapter->vf_mvs.l);
|
|
|
|
for (i = 0; i < num_vf_macvlans; i++) {
|
|
|
|
mv_list->vf = -1;
|
|
|
|
mv_list->free = true;
|
|
|
|
list_add(&mv_list->l, &adapter->vf_mvs.l);
|
|
|
|
mv_list++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/* Initialize default switching mode VEB */
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
|
|
|
|
adapter->flags2 |= IXGBE_FLAG2_BRIDGE_MODE_VEB;
|
|
|
|
|
2024-09-09 08:52:07 +00:00
|
|
|
/* If call to enable VFs succeeded then allocate memory
|
|
|
|
* for per VF control structures.
|
|
|
|
*/
|
|
|
|
adapter->vfinfo =
|
|
|
|
kcalloc(adapter->num_vfs,
|
|
|
|
sizeof(struct vf_data_storage), GFP_KERNEL);
|
|
|
|
if (adapter->vfinfo) {
|
2024-09-09 08:57:42 +00:00
|
|
|
/* limit trafffic classes based on VFs enabled */
|
|
|
|
if ((adapter->hw.mac.type == ixgbe_mac_82599EB) &&
|
|
|
|
(adapter->num_vfs < 16)) {
|
|
|
|
adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS;
|
|
|
|
adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS;
|
|
|
|
} else if (adapter->num_vfs < 32) {
|
|
|
|
adapter->dcb_cfg.num_tcs.pg_tcs = 4;
|
|
|
|
adapter->dcb_cfg.num_tcs.pfc_tcs = 4;
|
|
|
|
} else {
|
|
|
|
adapter->dcb_cfg.num_tcs.pg_tcs = 1;
|
|
|
|
adapter->dcb_cfg.num_tcs.pfc_tcs = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* We do not support RSS w/ SR-IOV */
|
|
|
|
adapter->ring_feature[RING_F_RSS].limit = 1;
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
/* Disable RSC when in SR-IOV mode */
|
|
|
|
adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE |
|
|
|
|
IXGBE_FLAG2_RSC_ENABLED);
|
2024-09-09 08:57:42 +00:00
|
|
|
|
|
|
|
/* enable spoof checking for all VFs */
|
2024-09-09 08:52:07 +00:00
|
|
|
for (i = 0; i < adapter->num_vfs; i++)
|
|
|
|
adapter->vfinfo[i].spoofchk_enabled = true;
|
2024-09-09 08:57:42 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Note this function is called when the user wants to enable SR-IOV
|
|
|
|
* VFs using the now deprecated module parameter
|
|
|
|
*/
|
|
|
|
void ixgbe_enable_sriov(struct ixgbe_adapter *adapter)
|
|
|
|
{
|
|
|
|
int pre_existing_vfs = 0;
|
|
|
|
|
|
|
|
pre_existing_vfs = pci_num_vf(adapter->pdev);
|
|
|
|
if (!pre_existing_vfs && !adapter->num_vfs)
|
2024-09-09 08:52:07 +00:00
|
|
|
return;
|
2024-09-09 08:57:42 +00:00
|
|
|
|
|
|
|
/* If there are pre-existing VFs then we have to force
|
|
|
|
* use of that many - over ride any module parameter value.
|
|
|
|
* This may result from the user unloading the PF driver
|
|
|
|
* while VFs were assigned to guest VMs or because the VFs
|
|
|
|
* have been created via the new PCI SR-IOV sysfs interface.
|
|
|
|
*/
|
|
|
|
if (pre_existing_vfs) {
|
|
|
|
adapter->num_vfs = pre_existing_vfs;
|
|
|
|
dev_warn(&adapter->pdev->dev,
|
|
|
|
"Virtual Functions already enabled for this device - Please reload all VF drivers to avoid spoofed packet errors\n");
|
|
|
|
} else {
|
|
|
|
int err;
|
|
|
|
/*
|
|
|
|
* The 82599 supports up to 64 VFs per physical function
|
|
|
|
* but this implementation limits allocation to 63 so that
|
|
|
|
* basic networking resources are still available to the
|
|
|
|
* physical function. If the user requests greater thn
|
|
|
|
* 63 VFs then it is an error - reset to default of zero.
|
|
|
|
*/
|
|
|
|
adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, IXGBE_MAX_VFS_DRV_LIMIT);
|
|
|
|
|
|
|
|
err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
|
|
|
|
if (err) {
|
|
|
|
e_err(probe, "Failed to enable PCI sriov: %d\n", err);
|
|
|
|
adapter->num_vfs = 0;
|
|
|
|
return;
|
|
|
|
}
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
if (!__ixgbe_enable_sriov(adapter))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* If we have gotten to this point then there is no memory available
|
|
|
|
* to manage the VF devices - print message and bail.
|
|
|
|
*/
|
2024-09-09 08:52:07 +00:00
|
|
|
e_err(probe, "Unable to allocate memory for VF Data Storage - "
|
|
|
|
"SRIOV disabled\n");
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_disable_sriov(adapter);
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
#endif /* #ifdef CONFIG_PCI_IOV */
|
|
|
|
int ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
|
2024-09-09 08:52:07 +00:00
|
|
|
{
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
u32 gpie;
|
|
|
|
u32 vmdctl;
|
2024-09-09 08:57:42 +00:00
|
|
|
int rss;
|
|
|
|
|
|
|
|
/* set num VFs to 0 to prevent access to vfinfo */
|
|
|
|
adapter->num_vfs = 0;
|
|
|
|
|
|
|
|
/* free VF control structures */
|
|
|
|
kfree(adapter->vfinfo);
|
|
|
|
adapter->vfinfo = NULL;
|
|
|
|
|
|
|
|
/* free macvlan list */
|
|
|
|
kfree(adapter->mv_list);
|
|
|
|
adapter->mv_list = NULL;
|
|
|
|
|
|
|
|
/* if SR-IOV is already disabled then there is nothing to do */
|
|
|
|
if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
|
|
|
|
return 0;
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_PCI_IOV
|
2024-09-09 08:57:42 +00:00
|
|
|
/*
|
|
|
|
* If our VFs are assigned we cannot shut down SR-IOV
|
|
|
|
* without causing issues, so just leave the hardware
|
|
|
|
* available but disabled
|
|
|
|
*/
|
|
|
|
if (pci_vfs_assigned(adapter->pdev)) {
|
|
|
|
e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n");
|
|
|
|
return -EPERM;
|
|
|
|
}
|
2024-09-09 08:52:07 +00:00
|
|
|
/* disable iov and allow time for transactions to clear */
|
|
|
|
pci_disable_sriov(adapter->pdev);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* turn off device IOV mode */
|
2024-09-09 08:57:42 +00:00
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, 0);
|
2024-09-09 08:52:07 +00:00
|
|
|
gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
|
|
|
|
gpie &= ~IXGBE_GPIE_VTMODE_MASK;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
|
|
|
|
|
|
|
|
/* set default pool back to 0 */
|
|
|
|
vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
|
|
|
|
vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/* Disable VMDq flag so device will be set in VM mode */
|
|
|
|
if (adapter->ring_feature[RING_F_VMDQ].limit == 1) {
|
|
|
|
adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED;
|
|
|
|
adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
|
|
|
|
rss = min_t(int, IXGBE_MAX_RSS_INDICES, num_online_cpus());
|
|
|
|
} else {
|
|
|
|
rss = min_t(int, IXGBE_MAX_L2A_QUEUES, num_online_cpus());
|
|
|
|
}
|
|
|
|
|
|
|
|
adapter->ring_feature[RING_F_VMDQ].offset = 0;
|
|
|
|
adapter->ring_feature[RING_F_RSS].limit = rss;
|
|
|
|
|
2024-09-09 08:52:07 +00:00
|
|
|
/* take a breather then clean up driver data */
|
|
|
|
msleep(100);
|
2024-09-09 08:57:42 +00:00
|
|
|
return 0;
|
|
|
|
}
|
2024-09-09 08:52:07 +00:00
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_PCI_IOV
|
|
|
|
struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
|
|
|
|
int err = 0;
|
|
|
|
int i;
|
|
|
|
int pre_existing_vfs = pci_num_vf(dev);
|
|
|
|
|
|
|
|
if (pre_existing_vfs && pre_existing_vfs != num_vfs)
|
|
|
|
err = ixgbe_disable_sriov(adapter);
|
|
|
|
else if (pre_existing_vfs && pre_existing_vfs == num_vfs)
|
|
|
|
return num_vfs;
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
/* While the SR-IOV capability structure reports total VFs to be 64,
|
|
|
|
* we have to limit the actual number allocated based on two factors.
|
|
|
|
* First, we reserve some transmit/receive resources for the PF.
|
|
|
|
* Second, VMDQ also uses the same pools that SR-IOV does. We need to
|
|
|
|
* account for this, so that we don't accidentally allocate more VFs
|
|
|
|
* than we have available pools. The PCI bus driver already checks for
|
|
|
|
* other values out of range.
|
|
|
|
*/
|
|
|
|
if ((num_vfs + adapter->num_rx_pools) > IXGBE_MAX_VF_FUNCTIONS)
|
|
|
|
return -EPERM;
|
|
|
|
|
|
|
|
adapter->num_vfs = num_vfs;
|
|
|
|
|
|
|
|
err = __ixgbe_enable_sriov(adapter);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_vfs; i++)
|
|
|
|
ixgbe_vf_configuration(dev, (i | 0x10000000));
|
|
|
|
|
|
|
|
err = pci_enable_sriov(dev, num_vfs);
|
|
|
|
if (err) {
|
|
|
|
e_dev_warn("Failed to enable PCI sriov: %d\n", err);
|
|
|
|
return err;
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_sriov_reinit(adapter);
|
2024-09-09 08:52:07 +00:00
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
return num_vfs;
|
|
|
|
#else
|
|
|
|
return 0;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ixgbe_pci_sriov_disable(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
|
|
|
|
int err;
|
|
|
|
#ifdef CONFIG_PCI_IOV
|
|
|
|
u32 current_flags = adapter->flags;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
err = ixgbe_disable_sriov(adapter);
|
|
|
|
|
|
|
|
/* Only reinit if no error and state changed */
|
|
|
|
#ifdef CONFIG_PCI_IOV
|
|
|
|
if (!err && current_flags != adapter->flags)
|
|
|
|
ixgbe_sriov_reinit(adapter);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
|
|
|
|
{
|
|
|
|
if (num_vfs == 0)
|
|
|
|
return ixgbe_pci_sriov_disable(dev);
|
|
|
|
else
|
|
|
|
return ixgbe_pci_sriov_enable(dev, num_vfs);
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
|
2024-09-09 08:57:42 +00:00
|
|
|
u32 *msgbuf, u32 vf)
|
2024-09-09 08:52:07 +00:00
|
|
|
{
|
2024-09-09 08:57:42 +00:00
|
|
|
int entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
|
|
|
|
>> IXGBE_VT_MSGINFO_SHIFT;
|
|
|
|
u16 *hash_list = (u16 *)&msgbuf[1];
|
2024-09-09 08:52:07 +00:00
|
|
|
struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
int i;
|
|
|
|
u32 vector_bit;
|
|
|
|
u32 vector_reg;
|
|
|
|
u32 mta_reg;
|
2024-09-09 08:57:42 +00:00
|
|
|
u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
/* only so many hash values supported */
|
|
|
|
entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* salt away the number of multi cast addresses assigned
|
|
|
|
* to this VF for later use to restore when the PF multi cast
|
|
|
|
* list changes
|
|
|
|
*/
|
|
|
|
vfinfo->num_vf_mc_hashes = entries;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* VFs are limited to using the MTA hash table for their multicast
|
|
|
|
* addresses
|
|
|
|
*/
|
|
|
|
for (i = 0; i < entries; i++) {
|
|
|
|
vfinfo->vf_mc_hashes[i] = hash_list[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) {
|
|
|
|
vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F;
|
|
|
|
vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F;
|
|
|
|
mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
|
|
|
|
mta_reg |= (1 << vector_bit);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
|
|
|
|
}
|
2024-09-09 08:57:42 +00:00
|
|
|
vmolr |= IXGBE_VMOLR_ROMPE;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
#ifdef CONFIG_PCI_IOV
|
2024-09-09 08:52:07 +00:00
|
|
|
void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
struct vf_data_storage *vfinfo;
|
|
|
|
int i, j;
|
|
|
|
u32 vector_bit;
|
|
|
|
u32 vector_reg;
|
|
|
|
u32 mta_reg;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_vfs; i++) {
|
2024-09-09 08:57:42 +00:00
|
|
|
u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(i));
|
2024-09-09 08:52:07 +00:00
|
|
|
vfinfo = &adapter->vfinfo[i];
|
|
|
|
for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) {
|
|
|
|
hw->addr_ctrl.mta_in_use++;
|
|
|
|
vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F;
|
|
|
|
vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F;
|
|
|
|
mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
|
|
|
|
mta_reg |= (1 << vector_bit);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
|
|
|
|
}
|
2024-09-09 08:57:42 +00:00
|
|
|
|
|
|
|
if (vfinfo->num_vf_mc_hashes)
|
|
|
|
vmolr |= IXGBE_VMOLR_ROMPE;
|
|
|
|
else
|
|
|
|
vmolr &= ~IXGBE_VMOLR_ROMPE;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VMOLR(i), vmolr);
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Restore any VF macvlans */
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_full_sync_mac_table(adapter);
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
2024-09-09 08:57:42 +00:00
|
|
|
#endif
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
|
|
|
|
u32 vf)
|
|
|
|
{
|
2024-09-09 08:57:42 +00:00
|
|
|
/* VLAN 0 is a special case, don't allow it to be removed */
|
|
|
|
if (!vid && !add)
|
|
|
|
return 0;
|
|
|
|
|
2024-09-09 08:52:07 +00:00
|
|
|
return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add);
|
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
|
2024-09-09 08:52:07 +00:00
|
|
|
{
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
2024-09-09 08:57:42 +00:00
|
|
|
int max_frame = msgbuf[1];
|
2024-09-09 08:52:07 +00:00
|
|
|
u32 max_frs;
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/*
|
|
|
|
* For 82599EB we have to keep all PFs and VFs operating with
|
|
|
|
* the same max_frame value in order to avoid sending an oversize
|
|
|
|
* frame to a VF. In order to guarantee this is handled correctly
|
|
|
|
* for all cases we have several special exceptions to take into
|
|
|
|
* account before we can enable the VF for receive
|
|
|
|
*/
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
|
|
struct net_device *dev = adapter->netdev;
|
|
|
|
int pf_max_frame = dev->mtu + ETH_HLEN;
|
|
|
|
u32 reg_offset, vf_shift, vfre;
|
|
|
|
s32 err = 0;
|
|
|
|
|
|
|
|
#ifdef CONFIG_FCOE
|
|
|
|
if (dev->features & NETIF_F_FCOE_MTU)
|
|
|
|
pf_max_frame = max_t(int, pf_max_frame,
|
|
|
|
IXGBE_FCOE_JUMBO_FRAME_SIZE);
|
|
|
|
|
|
|
|
#endif /* CONFIG_FCOE */
|
|
|
|
switch (adapter->vfinfo[vf].vf_api) {
|
|
|
|
case ixgbe_mbox_api_11:
|
|
|
|
/*
|
|
|
|
* Version 1.1 supports jumbo frames on VFs if PF has
|
|
|
|
* jumbo frames enabled which means legacy VFs are
|
|
|
|
* disabled
|
|
|
|
*/
|
|
|
|
if (pf_max_frame > ETH_FRAME_LEN)
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
/*
|
|
|
|
* If the PF or VF are running w/ jumbo frames enabled
|
|
|
|
* we need to shut down the VF Rx path as we cannot
|
|
|
|
* support jumbo frames on legacy VFs
|
|
|
|
*/
|
|
|
|
if ((pf_max_frame > ETH_FRAME_LEN) ||
|
|
|
|
(max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)))
|
|
|
|
err = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* determine VF receive enable location */
|
|
|
|
vf_shift = vf % 32;
|
|
|
|
reg_offset = vf / 32;
|
|
|
|
|
|
|
|
/* enable or disable receive depending on error */
|
|
|
|
vfre = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
|
|
|
|
if (err)
|
|
|
|
vfre &= ~(1 << vf_shift);
|
|
|
|
else
|
|
|
|
vfre |= 1 << vf_shift;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), vfre);
|
|
|
|
|
|
|
|
if (err) {
|
|
|
|
e_err(drv, "VF max_frame %d out of range\n", max_frame);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
}
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
/* MTU < 68 is an error and causes problems on some kernels */
|
2024-09-09 08:57:42 +00:00
|
|
|
if (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) {
|
|
|
|
e_err(drv, "VF max_frame %d out of range\n", max_frame);
|
|
|
|
return -EINVAL;
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/* pull current max frame size from hardware */
|
|
|
|
max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
|
|
|
|
max_frs &= IXGBE_MHADD_MFS_MASK;
|
|
|
|
max_frs >>= IXGBE_MHADD_MFS_SHIFT;
|
|
|
|
|
|
|
|
if (max_frs < max_frame) {
|
|
|
|
max_frs = max_frame << IXGBE_MHADD_MFS_SHIFT;
|
2024-09-09 08:52:07 +00:00
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs);
|
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
e_info(hw, "VF requests change max MTU to %d\n", max_frame);
|
|
|
|
|
|
|
|
return 0;
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe)
|
|
|
|
{
|
|
|
|
u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
|
2024-09-09 08:57:42 +00:00
|
|
|
vmolr |= IXGBE_VMOLR_BAM;
|
2024-09-09 08:52:07 +00:00
|
|
|
if (aupe)
|
|
|
|
vmolr |= IXGBE_VMOLR_AUPE;
|
|
|
|
else
|
|
|
|
vmolr &= ~IXGBE_VMOLR_AUPE;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
|
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
static void ixgbe_clear_vmvir(struct ixgbe_adapter *adapter, u32 vf)
|
2024-09-09 08:52:07 +00:00
|
|
|
{
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0);
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
|
|
|
|
{
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
2024-09-09 08:57:42 +00:00
|
|
|
struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
|
|
|
|
u8 num_tcs = netdev_get_num_tc(adapter->netdev);
|
|
|
|
|
|
|
|
/* add PF assigned VLAN or VLAN 0 */
|
|
|
|
ixgbe_set_vf_vlan(adapter, true, vfinfo->pf_vlan, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
/* reset offloads to defaults */
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_set_vmolr(hw, vf, !vfinfo->pf_vlan);
|
|
|
|
|
|
|
|
/* set outgoing tags for VFs */
|
|
|
|
if (!vfinfo->pf_vlan && !vfinfo->pf_qos && !num_tcs) {
|
|
|
|
ixgbe_clear_vmvir(adapter, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
} else {
|
2024-09-09 08:57:42 +00:00
|
|
|
if (vfinfo->pf_qos || !num_tcs)
|
|
|
|
ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
|
|
|
|
vfinfo->pf_qos, vf);
|
|
|
|
else
|
|
|
|
ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
|
|
|
|
adapter->default_up, vf);
|
|
|
|
|
|
|
|
if (vfinfo->spoofchk_enabled)
|
|
|
|
hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* reset multicast table array for vf */
|
|
|
|
adapter->vfinfo[vf].num_vf_mc_hashes = 0;
|
|
|
|
|
|
|
|
/* Flush and reset the mta with the new values */
|
|
|
|
ixgbe_set_rx_mode(adapter->netdev);
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
|
|
|
|
|
|
|
|
/* reset VF api back to unknown */
|
|
|
|
adapter->vfinfo[vf].vf_api = ixgbe_mbox_api_10;
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
|
|
|
|
int vf, unsigned char *mac_addr)
|
|
|
|
{
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
|
|
|
|
memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
|
|
|
|
ixgbe_add_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
|
|
|
|
int vf, int index, unsigned char *mac_addr)
|
|
|
|
{
|
|
|
|
struct list_head *pos;
|
|
|
|
struct vf_macvlans *entry;
|
|
|
|
|
|
|
|
if (index <= 1) {
|
|
|
|
list_for_each(pos, &adapter->vf_mvs.l) {
|
|
|
|
entry = list_entry(pos, struct vf_macvlans, l);
|
|
|
|
if (entry->vf == vf) {
|
|
|
|
entry->vf = -1;
|
|
|
|
entry->free = true;
|
|
|
|
entry->is_macvlan = false;
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_del_mac_filter(adapter,
|
|
|
|
entry->vf_macvlan, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If index was zero then we were asked to clear the uc list
|
|
|
|
* for the VF. We're done.
|
|
|
|
*/
|
|
|
|
if (!index)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
entry = NULL;
|
|
|
|
|
|
|
|
list_for_each(pos, &adapter->vf_mvs.l) {
|
|
|
|
entry = list_entry(pos, struct vf_macvlans, l);
|
|
|
|
if (entry->free)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If we traversed the entire list and didn't find a free entry
|
|
|
|
* then we're out of space on the RAR table. Also entry may
|
|
|
|
* be NULL because the original memory allocation for the list
|
|
|
|
* failed, which is not fatal but does mean we can't support
|
|
|
|
* VF requests for MACVLAN because we couldn't allocate
|
|
|
|
* memory for the list management required.
|
|
|
|
*/
|
|
|
|
if (!entry || !entry->free)
|
|
|
|
return -ENOSPC;
|
|
|
|
|
|
|
|
entry->free = false;
|
|
|
|
entry->is_macvlan = true;
|
|
|
|
entry->vf = vf;
|
|
|
|
memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_add_mac_filter(adapter, mac_addr, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
|
|
|
|
{
|
|
|
|
struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
|
|
|
|
unsigned int vfn = (event_mask & 0x3f);
|
|
|
|
|
|
|
|
bool enable = ((event_mask & 0x10000000U) != 0);
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
if (enable)
|
|
|
|
eth_zero_addr(adapter->vfinfo[vfn].vf_mac_addresses);
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
|
2024-09-09 08:52:07 +00:00
|
|
|
{
|
2024-09-09 08:57:42 +00:00
|
|
|
struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
|
2024-09-09 08:52:07 +00:00
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
2024-09-09 08:57:42 +00:00
|
|
|
unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
|
|
|
|
u32 reg, reg_offset, vf_shift;
|
|
|
|
u32 msgbuf[4] = {0, 0, 0, 0};
|
|
|
|
u8 *addr = (u8 *)(&msgbuf[1]);
|
|
|
|
u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
e_info(probe, "VF Reset msg received from vf %d\n", vf);
|
|
|
|
|
|
|
|
/* reset the filters for the device */
|
|
|
|
ixgbe_vf_reset_event(adapter, vf);
|
|
|
|
|
|
|
|
/* set vf mac address */
|
|
|
|
if (!is_zero_ether_addr(vf_mac))
|
|
|
|
ixgbe_set_vf_mac(adapter, vf, vf_mac);
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
vf_shift = vf % 32;
|
|
|
|
reg_offset = vf / 32;
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/* enable transmit for vf */
|
2024-09-09 08:52:07 +00:00
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset));
|
2024-09-09 08:57:42 +00:00
|
|
|
reg |= 1 << vf_shift;
|
2024-09-09 08:52:07 +00:00
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/* force drop enable for all VF Rx queues */
|
|
|
|
for (i = vf * q_per_pool; i < ((vf + 1) * q_per_pool); i++) {
|
|
|
|
/* flush previous write */
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
|
|
|
|
/* indicate to hardware that we want to set drop enable */
|
|
|
|
reg = IXGBE_QDE_WRITE | IXGBE_QDE_ENABLE;
|
|
|
|
reg |= i << IXGBE_QDE_IDX_SHIFT;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_QDE, reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* enable receive for vf */
|
2024-09-09 08:52:07 +00:00
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
|
2024-09-09 08:57:42 +00:00
|
|
|
reg |= 1 << vf_shift;
|
|
|
|
/*
|
|
|
|
* The 82599 cannot support a mix of jumbo and non-jumbo PF/VFs.
|
|
|
|
* For more info take a look at ixgbe_set_vf_lpe
|
|
|
|
*/
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
|
|
struct net_device *dev = adapter->netdev;
|
|
|
|
int pf_max_frame = dev->mtu + ETH_HLEN;
|
|
|
|
|
|
|
|
#ifdef CONFIG_FCOE
|
|
|
|
if (dev->features & NETIF_F_FCOE_MTU)
|
|
|
|
pf_max_frame = max_t(int, pf_max_frame,
|
|
|
|
IXGBE_FCOE_JUMBO_FRAME_SIZE);
|
|
|
|
|
|
|
|
#endif /* CONFIG_FCOE */
|
|
|
|
if (pf_max_frame > ETH_FRAME_LEN)
|
|
|
|
reg &= ~(1 << vf_shift);
|
|
|
|
}
|
2024-09-09 08:52:07 +00:00
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/* enable VF mailbox for further messages */
|
|
|
|
adapter->vfinfo[vf].clear_to_send = true;
|
|
|
|
|
2024-09-09 08:52:07 +00:00
|
|
|
/* Enable counting of spoofed packets in the SSVPC register */
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset));
|
|
|
|
reg |= (1 << vf_shift);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/*
|
|
|
|
* Reset the VFs TDWBAL and TDWBAH registers
|
|
|
|
* which are not cleared by an FLR
|
|
|
|
*/
|
|
|
|
for (i = 0; i < q_per_pool; i++) {
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBAHn(q_per_pool, vf, i), 0);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBALn(q_per_pool, vf, i), 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* reply to reset with ack and vf mac address */
|
|
|
|
msgbuf[0] = IXGBE_VF_RESET;
|
|
|
|
if (!is_zero_ether_addr(vf_mac)) {
|
|
|
|
msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
|
|
|
|
memcpy(addr, vf_mac, ETH_ALEN);
|
|
|
|
} else {
|
|
|
|
msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
|
|
|
|
dev_warn(&adapter->pdev->dev,
|
|
|
|
"VF %d has no MAC address assigned, you may have to assign one manually\n",
|
|
|
|
vf);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Piggyback the multicast filter type so VF can compute the
|
|
|
|
* correct vectors
|
|
|
|
*/
|
|
|
|
msgbuf[3] = hw->mac.mc_filter_type;
|
|
|
|
ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ixgbe_set_vf_mac_addr(struct ixgbe_adapter *adapter,
|
|
|
|
u32 *msgbuf, u32 vf)
|
|
|
|
{
|
|
|
|
u8 *new_mac = ((u8 *)(&msgbuf[1]));
|
|
|
|
|
|
|
|
if (!is_valid_ether_addr(new_mac)) {
|
|
|
|
e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (adapter->vfinfo[vf].pf_set_mac &&
|
|
|
|
!ether_addr_equal(adapter->vfinfo[vf].vf_mac_addresses, new_mac)) {
|
|
|
|
e_warn(drv,
|
|
|
|
"VF %d attempted to override administratively set MAC address\n"
|
|
|
|
"Reload the VF driver to resume operations\n",
|
|
|
|
vf);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ixgbe_set_vf_mac(adapter, vf, new_mac) < 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ixgbe_find_vlvf_entry(struct ixgbe_hw *hw, u32 vlan)
|
|
|
|
{
|
|
|
|
u32 vlvf;
|
|
|
|
s32 regindex;
|
|
|
|
|
|
|
|
/* short cut the special case */
|
|
|
|
if (vlan == 0)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* Search for the vlan id in the VLVF entries */
|
|
|
|
for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
|
|
|
|
vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
|
|
|
|
if ((vlvf & VLAN_VID_MASK) == vlan)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Return a negative value if not found */
|
|
|
|
if (regindex >= IXGBE_VLVF_ENTRIES)
|
|
|
|
regindex = -1;
|
|
|
|
|
|
|
|
return regindex;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter,
|
|
|
|
u32 *msgbuf, u32 vf)
|
|
|
|
{
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
int add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT;
|
|
|
|
int vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
|
|
|
|
int err;
|
|
|
|
s32 reg_ndx;
|
|
|
|
u32 vlvf;
|
|
|
|
u32 bits;
|
|
|
|
u8 tcs = netdev_get_num_tc(adapter->netdev);
|
|
|
|
|
|
|
|
if (adapter->vfinfo[vf].pf_vlan || tcs) {
|
|
|
|
e_warn(drv,
|
|
|
|
"VF %d attempted to override administratively set VLAN configuration\n"
|
|
|
|
"Reload the VF driver to resume operations\n",
|
|
|
|
vf);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (add)
|
|
|
|
adapter->vfinfo[vf].vlan_count++;
|
|
|
|
else if (adapter->vfinfo[vf].vlan_count)
|
|
|
|
adapter->vfinfo[vf].vlan_count--;
|
|
|
|
|
|
|
|
/* in case of promiscuous mode any VLAN filter set for a VF must
|
|
|
|
* also have the PF pool added to it.
|
|
|
|
*/
|
|
|
|
if (add && adapter->netdev->flags & IFF_PROMISC)
|
|
|
|
err = ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0));
|
|
|
|
|
|
|
|
err = ixgbe_set_vf_vlan(adapter, add, vid, vf);
|
|
|
|
if (!err && adapter->vfinfo[vf].spoofchk_enabled)
|
|
|
|
hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
|
|
|
|
|
|
|
|
/* Go through all the checks to see if the VLAN filter should
|
|
|
|
* be wiped completely.
|
|
|
|
*/
|
|
|
|
if (!add && adapter->netdev->flags & IFF_PROMISC) {
|
|
|
|
reg_ndx = ixgbe_find_vlvf_entry(hw, vid);
|
|
|
|
if (reg_ndx < 0)
|
|
|
|
return err;
|
|
|
|
vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(reg_ndx));
|
|
|
|
/* See if any other pools are set for this VLAN filter
|
|
|
|
* entry other than the PF.
|
|
|
|
*/
|
|
|
|
if (VMDQ_P(0) < 32) {
|
|
|
|
bits = IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2));
|
|
|
|
bits &= ~(1 << VMDQ_P(0));
|
|
|
|
bits |= IXGBE_READ_REG(hw,
|
|
|
|
IXGBE_VLVFB(reg_ndx * 2) + 1);
|
|
|
|
} else {
|
|
|
|
bits = IXGBE_READ_REG(hw,
|
|
|
|
IXGBE_VLVFB(reg_ndx * 2) + 1);
|
|
|
|
bits &= ~(1 << (VMDQ_P(0) - 32));
|
|
|
|
bits |= IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* If the filter was removed then ensure PF pool bit
|
|
|
|
* is cleared if the PF only added itself to the pool
|
|
|
|
* because the PF is in promiscuous mode.
|
|
|
|
*/
|
|
|
|
if ((vlvf & VLAN_VID_MASK) == vid &&
|
|
|
|
!test_bit(vid, adapter->active_vlans) && !bits)
|
|
|
|
ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0));
|
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ixgbe_set_vf_macvlan_msg(struct ixgbe_adapter *adapter,
|
|
|
|
u32 *msgbuf, u32 vf)
|
|
|
|
{
|
|
|
|
u8 *new_mac = ((u8 *)(&msgbuf[1]));
|
|
|
|
int index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
|
|
|
|
IXGBE_VT_MSGINFO_SHIFT;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (adapter->vfinfo[vf].pf_set_mac && index > 0) {
|
|
|
|
e_warn(drv,
|
|
|
|
"VF %d requested MACVLAN filter but is administratively denied\n",
|
|
|
|
vf);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* An non-zero index indicates the VF is setting a filter */
|
|
|
|
if (index) {
|
|
|
|
if (!is_valid_ether_addr(new_mac)) {
|
|
|
|
e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the VF is allowed to set MAC filters then turn off
|
|
|
|
* anti-spoofing to avoid false positives.
|
|
|
|
*/
|
|
|
|
if (adapter->vfinfo[vf].spoofchk_enabled)
|
|
|
|
ixgbe_ndo_set_vf_spoofchk(adapter->netdev, vf, false);
|
|
|
|
}
|
|
|
|
|
|
|
|
err = ixgbe_set_vf_macvlan(adapter, vf, index, new_mac);
|
|
|
|
if (err == -ENOSPC)
|
|
|
|
e_warn(drv,
|
|
|
|
"VF %d has requested a MACVLAN filter but there is no space for it\n",
|
|
|
|
vf);
|
|
|
|
|
|
|
|
return err < 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter,
|
|
|
|
u32 *msgbuf, u32 vf)
|
|
|
|
{
|
|
|
|
int api = msgbuf[1];
|
|
|
|
|
|
|
|
switch (api) {
|
|
|
|
case ixgbe_mbox_api_10:
|
|
|
|
case ixgbe_mbox_api_11:
|
|
|
|
adapter->vfinfo[vf].vf_api = api;
|
|
|
|
return 0;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
e_info(drv, "VF %d requested invalid api version %u\n", vf, api);
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter,
|
|
|
|
u32 *msgbuf, u32 vf)
|
|
|
|
{
|
|
|
|
struct net_device *dev = adapter->netdev;
|
|
|
|
struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
|
|
|
|
unsigned int default_tc = 0;
|
|
|
|
u8 num_tcs = netdev_get_num_tc(dev);
|
|
|
|
|
|
|
|
/* verify the PF is supporting the correct APIs */
|
|
|
|
switch (adapter->vfinfo[vf].vf_api) {
|
|
|
|
case ixgbe_mbox_api_20:
|
|
|
|
case ixgbe_mbox_api_11:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* only allow 1 Tx queue for bandwidth limiting */
|
|
|
|
msgbuf[IXGBE_VF_TX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
|
|
|
|
msgbuf[IXGBE_VF_RX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
|
|
|
|
|
|
|
|
/* if TCs > 1 determine which TC belongs to default user priority */
|
|
|
|
if (num_tcs > 1)
|
|
|
|
default_tc = netdev_get_prio_tc_map(dev, adapter->default_up);
|
|
|
|
|
|
|
|
/* notify VF of need for VLAN tag stripping, and correct queue */
|
|
|
|
if (num_tcs)
|
|
|
|
msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
|
|
|
|
else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos)
|
|
|
|
msgbuf[IXGBE_VF_TRANS_VLAN] = 1;
|
|
|
|
else
|
|
|
|
msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
|
|
|
|
|
|
|
|
/* notify VF of default queue */
|
|
|
|
msgbuf[IXGBE_VF_DEF_QUEUE] = default_tc;
|
|
|
|
|
|
|
|
return 0;
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
|
|
|
|
{
|
|
|
|
u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
|
|
|
|
u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
s32 retval;
|
|
|
|
|
|
|
|
retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
if (retval) {
|
2024-09-09 08:52:07 +00:00
|
|
|
pr_err("Error receiving message from VF\n");
|
2024-09-09 08:57:42 +00:00
|
|
|
return retval;
|
|
|
|
}
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
/* this is a message we already processed, do nothing */
|
|
|
|
if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
|
2024-09-09 08:57:42 +00:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* flush the ack before we write any messages back */
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
|
|
|
|
if (msgbuf[0] == IXGBE_VF_RESET)
|
|
|
|
return ixgbe_vf_reset_msg(adapter, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* until the vf completes a virtual function reset it should not be
|
|
|
|
* allowed to start any configuration.
|
|
|
|
*/
|
|
|
|
if (!adapter->vfinfo[vf].clear_to_send) {
|
|
|
|
msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
|
|
|
|
ixgbe_write_mbx(hw, msgbuf, 1, vf);
|
2024-09-09 08:57:42 +00:00
|
|
|
return 0;
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
switch ((msgbuf[0] & 0xFFFF)) {
|
|
|
|
case IXGBE_VF_SET_MAC_ADDR:
|
2024-09-09 08:57:42 +00:00
|
|
|
retval = ixgbe_set_vf_mac_addr(adapter, msgbuf, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
break;
|
|
|
|
case IXGBE_VF_SET_MULTICAST:
|
2024-09-09 08:57:42 +00:00
|
|
|
retval = ixgbe_set_vf_multicasts(adapter, msgbuf, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
break;
|
|
|
|
case IXGBE_VF_SET_VLAN:
|
2024-09-09 08:57:42 +00:00
|
|
|
retval = ixgbe_set_vf_vlan_msg(adapter, msgbuf, vf);
|
|
|
|
break;
|
|
|
|
case IXGBE_VF_SET_LPE:
|
|
|
|
retval = ixgbe_set_vf_lpe(adapter, msgbuf, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
break;
|
|
|
|
case IXGBE_VF_SET_MACVLAN:
|
2024-09-09 08:57:42 +00:00
|
|
|
retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf);
|
|
|
|
break;
|
|
|
|
case IXGBE_VF_API_NEGOTIATE:
|
|
|
|
retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf);
|
|
|
|
break;
|
|
|
|
case IXGBE_VF_GET_QUEUES:
|
|
|
|
retval = ixgbe_get_vf_queues(adapter, msgbuf, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
|
|
|
|
retval = IXGBE_ERR_MBX;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* notify the VF of the results of what it sent us */
|
|
|
|
if (retval)
|
|
|
|
msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
|
|
|
|
else
|
|
|
|
msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
|
|
|
|
|
|
|
|
msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf)
|
|
|
|
{
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
u32 msg = IXGBE_VT_MSGTYPE_NACK;
|
|
|
|
|
|
|
|
/* if device isn't clear to send it shouldn't be reading either */
|
|
|
|
if (!adapter->vfinfo[vf].clear_to_send)
|
|
|
|
ixgbe_write_mbx(hw, &msg, 1, vf);
|
|
|
|
}
|
|
|
|
|
|
|
|
void ixgbe_msg_task(struct ixgbe_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
u32 vf;
|
|
|
|
|
|
|
|
for (vf = 0; vf < adapter->num_vfs; vf++) {
|
|
|
|
/* process any reset requests */
|
|
|
|
if (!ixgbe_check_for_rst(hw, vf))
|
|
|
|
ixgbe_vf_reset_event(adapter, vf);
|
|
|
|
|
|
|
|
/* process any messages pending */
|
|
|
|
if (!ixgbe_check_for_msg(hw, vf))
|
|
|
|
ixgbe_rcv_msg_from_vf(adapter, vf);
|
|
|
|
|
|
|
|
/* process any acks */
|
|
|
|
if (!ixgbe_check_for_ack(hw, vf))
|
|
|
|
ixgbe_rcv_ack_from_vf(adapter, vf);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
|
|
|
|
/* disable transmit and receive for all vfs */
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
|
|
|
|
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
u32 ping;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0 ; i < adapter->num_vfs; i++) {
|
|
|
|
ping = IXGBE_PF_CONTROL_MSG;
|
|
|
|
if (adapter->vfinfo[i].clear_to_send)
|
|
|
|
ping |= IXGBE_VT_MSGTYPE_CTS;
|
|
|
|
ixgbe_write_mbx(hw, &ping, 1, i);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
|
|
|
|
{
|
|
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (!is_valid_ether_addr(mac) || (vf >= adapter->num_vfs))
|
|
|
|
return -EINVAL;
|
|
|
|
adapter->vfinfo[vf].pf_set_mac = true;
|
|
|
|
dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
|
|
|
|
dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
|
|
|
|
" change effective.");
|
|
|
|
if (test_bit(__IXGBE_DOWN, &adapter->state)) {
|
|
|
|
dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
|
|
|
|
" but the PF device is not up.\n");
|
|
|
|
dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
|
|
|
|
" attempting to use the VF device.\n");
|
|
|
|
}
|
|
|
|
return ixgbe_set_vf_mac(adapter, vf, mac);
|
|
|
|
}
|
|
|
|
|
|
|
|
int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
|
|
|
|
{
|
|
|
|
int err = 0;
|
|
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
|
|
|
|
if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
|
|
|
|
return -EINVAL;
|
|
|
|
if (vlan || qos) {
|
2024-09-09 08:57:42 +00:00
|
|
|
if (adapter->vfinfo[vf].pf_vlan)
|
|
|
|
err = ixgbe_set_vf_vlan(adapter, false,
|
|
|
|
adapter->vfinfo[vf].pf_vlan,
|
|
|
|
vf);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
2024-09-09 08:52:07 +00:00
|
|
|
err = ixgbe_set_vf_vlan(adapter, true, vlan, vf);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_set_vmvir(adapter, vlan, qos, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
ixgbe_set_vmolr(hw, vf, false);
|
|
|
|
if (adapter->vfinfo[vf].spoofchk_enabled)
|
|
|
|
hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
|
|
|
|
adapter->vfinfo[vf].vlan_count++;
|
|
|
|
adapter->vfinfo[vf].pf_vlan = vlan;
|
|
|
|
adapter->vfinfo[vf].pf_qos = qos;
|
|
|
|
dev_info(&adapter->pdev->dev,
|
|
|
|
"Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
|
|
|
|
if (test_bit(__IXGBE_DOWN, &adapter->state)) {
|
|
|
|
dev_warn(&adapter->pdev->dev,
|
|
|
|
"The VF VLAN has been set,"
|
|
|
|
" but the PF device is not up.\n");
|
|
|
|
dev_warn(&adapter->pdev->dev,
|
|
|
|
"Bring the PF device up before"
|
|
|
|
" attempting to use the VF device.\n");
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
err = ixgbe_set_vf_vlan(adapter, false,
|
|
|
|
adapter->vfinfo[vf].pf_vlan, vf);
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_clear_vmvir(adapter, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
ixgbe_set_vmolr(hw, vf, true);
|
|
|
|
hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
|
|
|
|
if (adapter->vfinfo[vf].vlan_count)
|
|
|
|
adapter->vfinfo[vf].vlan_count--;
|
|
|
|
adapter->vfinfo[vf].pf_vlan = 0;
|
|
|
|
adapter->vfinfo[vf].pf_qos = 0;
|
2024-09-09 08:57:42 +00:00
|
|
|
}
|
2024-09-09 08:52:07 +00:00
|
|
|
out:
|
2024-09-09 08:57:42 +00:00
|
|
|
return err;
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
static int ixgbe_link_mbps(struct ixgbe_adapter *adapter)
|
2024-09-09 08:52:07 +00:00
|
|
|
{
|
2024-09-09 08:57:42 +00:00
|
|
|
switch (adapter->link_speed) {
|
2024-09-09 08:52:07 +00:00
|
|
|
case IXGBE_LINK_SPEED_100_FULL:
|
|
|
|
return 100;
|
|
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
|
|
return 1000;
|
|
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
|
|
return 10000;
|
|
|
|
default:
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
static void ixgbe_set_vf_rate_limit(struct ixgbe_adapter *adapter, int vf)
|
2024-09-09 08:52:07 +00:00
|
|
|
{
|
2024-09-09 08:57:42 +00:00
|
|
|
struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
u32 bcnrc_val = 0;
|
|
|
|
u16 queue, queues_per_pool;
|
|
|
|
u16 tx_rate = adapter->vfinfo[vf].tx_rate;
|
|
|
|
|
|
|
|
if (tx_rate) {
|
|
|
|
/* start with base link speed value */
|
|
|
|
bcnrc_val = adapter->vf_rate_link_speed;
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
/* Calculate the rate factor values to set */
|
2024-09-09 08:57:42 +00:00
|
|
|
bcnrc_val <<= IXGBE_RTTBCNRC_RF_INT_SHIFT;
|
|
|
|
bcnrc_val /= tx_rate;
|
|
|
|
|
|
|
|
/* clear everything but the rate factor */
|
|
|
|
bcnrc_val &= IXGBE_RTTBCNRC_RF_INT_MASK |
|
|
|
|
IXGBE_RTTBCNRC_RF_DEC_MASK;
|
|
|
|
|
|
|
|
/* enable the rate scheduler */
|
|
|
|
bcnrc_val |= IXGBE_RTTBCNRC_RS_ENA;
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
|
|
|
|
* register. Typically MMW_SIZE=0x014 if 9728-byte jumbo is supported
|
|
|
|
* and 0x004 otherwise.
|
|
|
|
*/
|
|
|
|
switch (hw->mac.type) {
|
|
|
|
case ixgbe_mac_82599EB:
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x4);
|
|
|
|
break;
|
|
|
|
case ixgbe_mac_X540:
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x14);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/* determine how many queues per pool based on VMDq mask */
|
|
|
|
queues_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
|
|
|
|
|
|
|
|
/* write value for all Tx queues belonging to VF */
|
|
|
|
for (queue = 0; queue < queues_per_pool; queue++) {
|
|
|
|
unsigned int reg_idx = (vf * queues_per_pool) + queue;
|
|
|
|
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, reg_idx);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val);
|
|
|
|
}
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
|
|
|
|
{
|
2024-09-09 08:57:42 +00:00
|
|
|
int i;
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
/* VF Tx rate limit was not set */
|
2024-09-09 08:57:42 +00:00
|
|
|
if (!adapter->vf_rate_link_speed)
|
2024-09-09 08:52:07 +00:00
|
|
|
return;
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
if (ixgbe_link_mbps(adapter) != adapter->vf_rate_link_speed) {
|
2024-09-09 08:52:07 +00:00
|
|
|
adapter->vf_rate_link_speed = 0;
|
|
|
|
dev_info(&adapter->pdev->dev,
|
2024-09-09 08:57:42 +00:00
|
|
|
"Link speed has been changed. VF Transmit rate is disabled\n");
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_vfs; i++) {
|
2024-09-09 08:57:42 +00:00
|
|
|
if (!adapter->vf_rate_link_speed)
|
2024-09-09 08:52:07 +00:00
|
|
|
adapter->vfinfo[i].tx_rate = 0;
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
ixgbe_set_vf_rate_limit(adapter, i);
|
2024-09-09 08:52:07 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
|
|
|
|
int max_tx_rate)
|
2024-09-09 08:52:07 +00:00
|
|
|
{
|
|
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
2024-09-09 08:57:42 +00:00
|
|
|
int link_speed;
|
2024-09-09 08:52:07 +00:00
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/* verify VF is active */
|
|
|
|
if (vf >= adapter->num_vfs)
|
2024-09-09 08:52:07 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
/* verify link is up */
|
|
|
|
if (!adapter->link_up)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* verify we are linked at 10Gbps */
|
|
|
|
link_speed = ixgbe_link_mbps(adapter);
|
|
|
|
if (link_speed != 10000)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (min_tx_rate)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* rate limit cannot be less than 10Mbs or greater than link speed */
|
|
|
|
if (max_tx_rate && ((max_tx_rate <= 10) || (max_tx_rate > link_speed)))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* store values */
|
|
|
|
adapter->vf_rate_link_speed = link_speed;
|
|
|
|
adapter->vfinfo[vf].tx_rate = max_tx_rate;
|
|
|
|
|
|
|
|
/* update hardware configuration */
|
|
|
|
ixgbe_set_vf_rate_limit(adapter, vf);
|
2024-09-09 08:52:07 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting)
|
|
|
|
{
|
|
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
|
|
int vf_target_reg = vf >> 3;
|
|
|
|
int vf_target_shift = vf % 8;
|
|
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
u32 regval;
|
|
|
|
|
2024-09-09 08:57:42 +00:00
|
|
|
if (vf >= adapter->num_vfs)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2024-09-09 08:52:07 +00:00
|
|
|
adapter->vfinfo[vf].spoofchk_enabled = setting;
|
|
|
|
|
|
|
|
regval = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
|
|
|
|
regval &= ~(1 << vf_target_shift);
|
|
|
|
regval |= (setting << vf_target_shift);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), regval);
|
|
|
|
|
|
|
|
if (adapter->vfinfo[vf].vlan_count) {
|
|
|
|
vf_target_shift += IXGBE_SPOOF_VLANAS_SHIFT;
|
|
|
|
regval = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
|
|
|
|
regval &= ~(1 << vf_target_shift);
|
|
|
|
regval |= (setting << vf_target_shift);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), regval);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ixgbe_ndo_get_vf_config(struct net_device *netdev,
|
|
|
|
int vf, struct ifla_vf_info *ivi)
|
|
|
|
{
|
|
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (vf >= adapter->num_vfs)
|
|
|
|
return -EINVAL;
|
|
|
|
ivi->vf = vf;
|
|
|
|
memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
|
2024-09-09 08:57:42 +00:00
|
|
|
ivi->max_tx_rate = adapter->vfinfo[vf].tx_rate;
|
|
|
|
ivi->min_tx_rate = 0;
|
2024-09-09 08:52:07 +00:00
|
|
|
ivi->vlan = adapter->vfinfo[vf].pf_vlan;
|
|
|
|
ivi->qos = adapter->vfinfo[vf].pf_qos;
|
|
|
|
ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled;
|
|
|
|
return 0;
|
|
|
|
}
|