256 lines
7.5 KiB
Plaintext
256 lines
7.5 KiB
Plaintext
|
/*
|
||
|
|
* Copyright (c) 2015 The Linux Foundation. All rights reserved.
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License version 2 and
|
||
|
|
* only version 2 as published by the Free Software Foundation.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Note: default configuration is for the camera modules to be powered
|
||
|
|
* by the PMIC from the CSI connector. Alternative configuration is for
|
||
|
|
* self-powered camera modules.
|
||
|
|
*/
|
||
|
|
&cci {
|
||
|
|
actuator0: qcom,actuator@0 {
|
||
|
|
cell-index = <0>;
|
||
|
|
reg = <0x0>;
|
||
|
|
compatible = "qcom,actuator";
|
||
|
|
qcom,cci-master = <0>;
|
||
|
|
cam_vaf-supply = <&pm8994_l23>;
|
||
|
|
/* cam_vaf-supply = <&vph_pwr_vreg>; */
|
||
|
|
qcom,cam-vreg-name = "cam_vaf";
|
||
|
|
qcom,cam-vreg-min-voltage = <2800000>;
|
||
|
|
qcom,cam-vreg-max-voltage = <2800000>;
|
||
|
|
qcom,cam-vreg-op-mode = <100000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
actuator1: qcom,actuator@1 {
|
||
|
|
cell-index = <1>;
|
||
|
|
reg = <0x1>;
|
||
|
|
compatible = "qcom,actuator";
|
||
|
|
qcom,cci-master = <1>;
|
||
|
|
cam_vaf-supply = <&pm8994_l23>;
|
||
|
|
/* cam_vaf-supply = <&vph_pwr_vreg>; */
|
||
|
|
qcom,cam-vreg-name = "cam_vaf";
|
||
|
|
qcom,cam-vreg-min-voltage = <2800000>;
|
||
|
|
qcom,cam-vreg-max-voltage = <2800000>;
|
||
|
|
qcom,cam-vreg-op-mode = <100000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom0: qcom,eeprom@0 {
|
||
|
|
cell-index = <0>;
|
||
|
|
reg = <0>;
|
||
|
|
qcom,eeprom-name = "onsemi_cat24c32";
|
||
|
|
compatible = "qcom,eeprom";
|
||
|
|
qcom,slave-addr = <0xa0>;
|
||
|
|
qcom,cci-master = <0>;
|
||
|
|
qcom,num-blocks = <1>;
|
||
|
|
qcom,page0 = <0 0 0 0 0 0>;
|
||
|
|
qcom,poll0 = <0 0 0 0 0 0>;
|
||
|
|
qcom,saddr0 = <0xa0>;
|
||
|
|
qcom,mem0 = <2245 0x00 2 0 1 0>;
|
||
|
|
cam_vio-supply = <&pm8994_lvs1>;
|
||
|
|
/* cam_vio-supply = <&vph_pwr_vreg>; */
|
||
|
|
qcom,cam-vreg-name = "cam_vio";
|
||
|
|
qcom,cam-vreg-min-voltage = <0>;
|
||
|
|
qcom,cam-vreg-max-voltage = <0>;
|
||
|
|
qcom,cam-vreg-op-mode = <0>;
|
||
|
|
qcom,cam-power-seq-type = "sensor_vreg";
|
||
|
|
qcom,cam-power-seq-val = "cam_vio";
|
||
|
|
qcom,cam-power-seq-cfg-val = <1>;
|
||
|
|
qcom,cam-power-seq-delay = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom1: qcom,eeprom@1 {
|
||
|
|
cell-index = <1>;
|
||
|
|
reg = <0x1>;
|
||
|
|
qcom,eeprom-name = "onsemi_cat24c16";
|
||
|
|
compatible = "qcom,eeprom";
|
||
|
|
qcom,slave-addr = <0xa0>;
|
||
|
|
qcom,cci-master = <1>;
|
||
|
|
qcom,num-blocks = <7>;
|
||
|
|
|
||
|
|
qcom,page0 = <0 0 0 0 0 0>;
|
||
|
|
qcom,poll0 = <0 0 0 0 0 0>;
|
||
|
|
qcom,saddr0 = <0xa0>;
|
||
|
|
qcom,mem0 = <256 0x00 1 0 1 0>;
|
||
|
|
|
||
|
|
qcom,page1 = <0 0 0 0 0 0>;
|
||
|
|
qcom,poll1 = <0 0 0 0 0 0>;
|
||
|
|
qcom,saddr1 = <0xa2>;
|
||
|
|
qcom,mem1 = <256 0x00 1 0 1 0>;
|
||
|
|
|
||
|
|
qcom,page2 = <0 0 0 0 0 0>;
|
||
|
|
qcom,poll2 = <0 0 0 0 0 0>;
|
||
|
|
qcom,saddr2 = <0xa4>;
|
||
|
|
qcom,mem2 = <256 0x00 1 0 1 0>;
|
||
|
|
|
||
|
|
qcom,page3 = <0 0 0 0 0 0>;
|
||
|
|
qcom,poll3 = <0 0 0 0 0 0>;
|
||
|
|
qcom,saddr3 = <0xa6>;
|
||
|
|
qcom,mem3 = <256 0x00 1 0 1 0>;
|
||
|
|
|
||
|
|
qcom,page4 = <0 0 0 0 0 0>;
|
||
|
|
qcom,poll4 = <0 0 0 0 0 0>;
|
||
|
|
qcom,saddr4 = <0xa8>;
|
||
|
|
qcom,mem4 = <256 0x00 1 0 1 0>;
|
||
|
|
|
||
|
|
qcom,page5 = <0 0 0 0 0 0>;
|
||
|
|
qcom,poll5 = <0 0 0 0 0 0>;
|
||
|
|
qcom,saddr5 = <0xaa>;
|
||
|
|
qcom,mem5 = <256 0x00 1 0 1 0>;
|
||
|
|
|
||
|
|
qcom,page6 = <0 0 0 0 0 0>;
|
||
|
|
qcom,poll6 = <0 0 0 0 0 0>;
|
||
|
|
qcom,saddr6 = <0xac>;
|
||
|
|
qcom,mem6 = <254 0x00 1 0 1 0>;
|
||
|
|
|
||
|
|
cam_vio-supply = <&pm8994_lvs1>;
|
||
|
|
/* cam_vio-supply = <&vph_pwr_vreg>; */
|
||
|
|
qcom,cam-vreg-name = "cam_vio";
|
||
|
|
qcom,cam-vreg-min-voltage = <0>;
|
||
|
|
qcom,cam-vreg-max-voltage = <0>;
|
||
|
|
qcom,cam-vreg-op-mode = <0>;
|
||
|
|
qcom,cam-power-seq-type = "sensor_vreg";
|
||
|
|
qcom,cam-power-seq-val = "cam_vio";
|
||
|
|
qcom,cam-power-seq-cfg-val = <1>;
|
||
|
|
qcom,cam-power-seq-delay = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qcom,camera@0 {
|
||
|
|
cell-index = <0>;
|
||
|
|
compatible = "qcom,camera";
|
||
|
|
reg = <0x0>;
|
||
|
|
qcom,csiphy-sd-index = <0>;
|
||
|
|
qcom,csid-sd-index = <0>;
|
||
|
|
qcom,mount-angle = <0>;
|
||
|
|
qcom,actuator-src = <&actuator0>;
|
||
|
|
qcom,eeprom-src = <&eeprom0>;
|
||
|
|
cam_vdig-supply = <&vph_pwr_vreg>;
|
||
|
|
/* Cameras powered by PMIC: */
|
||
|
|
cam_vio-supply = <&pm8994_lvs1>;
|
||
|
|
cam_vana-supply = <&pm8994_l17>;
|
||
|
|
/* Self-powered cameras: */
|
||
|
|
/* cam_vio-supply = <&vph_pwr_vreg>; */
|
||
|
|
/* cam_vana-supply = <&vph_pwr_vreg>; */
|
||
|
|
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
|
||
|
|
qcom,cam-vreg-min-voltage = <1300000 0 2500000>;
|
||
|
|
qcom,cam-vreg-max-voltage = <1300000 0 2500000>;
|
||
|
|
qcom,cam-vreg-op-mode = <105000 0 80000>;
|
||
|
|
qcom,gpio-no-mux = <0>;
|
||
|
|
pinctrl-names = "cam_default", "cam_suspend";
|
||
|
|
pinctrl-0 = <&cam_sensor_mclk0_active &cam_csi0_sensor_active>;
|
||
|
|
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||
|
|
&cam_csi0_sensor_suspend>;
|
||
|
|
gpios = <&tlmm 13 0>,
|
||
|
|
<&tlmm 25 0>,
|
||
|
|
<&tlmm 26 0>;
|
||
|
|
qcom,gpio-reset = <1>;
|
||
|
|
qcom,gpio-standby = <2>;
|
||
|
|
qcom,gpio-req-tbl-num = <0 1 2>;
|
||
|
|
qcom,gpio-req-tbl-flags = <1 0 0>;
|
||
|
|
qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
|
||
|
|
"CAM_RESET0",
|
||
|
|
"CAM_STANDBY0";
|
||
|
|
qcom,sensor-position = <0>;
|
||
|
|
qcom,sensor-mode = <0>;
|
||
|
|
qcom,cci-master = <0>;
|
||
|
|
status = "ok";
|
||
|
|
clocks = <&clock_mmss clk_mclk0_clk_src>,
|
||
|
|
<&clock_mmss clk_camss_mclk0_clk>;
|
||
|
|
clock-names = "cam_src_clk", "cam_clk";
|
||
|
|
};
|
||
|
|
|
||
|
|
qcom,camera@1 {
|
||
|
|
cell-index = <1>;
|
||
|
|
compatible = "qcom,camera";
|
||
|
|
reg = <0x1>;
|
||
|
|
qcom,csiphy-sd-index = <1>;
|
||
|
|
qcom,csid-sd-index = <1>;
|
||
|
|
qcom,mount-angle = <0>;
|
||
|
|
cam_vdig-supply = <&vph_pwr_vreg>;
|
||
|
|
/* Cameras powered by PMIC: */
|
||
|
|
cam_vio-supply = <&pm8994_lvs1>;
|
||
|
|
cam_vana-supply = <&pm8994_l18>;
|
||
|
|
/* Self-powered cameras: */
|
||
|
|
/* cam_vio-supply = <&vph_pwr_vreg>; */
|
||
|
|
/* cam_vana-supply = <&vph_pwr_vreg>; */
|
||
|
|
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
|
||
|
|
qcom,cam-vreg-min-voltage = <1000000 0 3150000>;
|
||
|
|
qcom,cam-vreg-max-voltage = <1000000 0 3600000>;
|
||
|
|
qcom,cam-vreg-op-mode = <105000 0 80000>;
|
||
|
|
qcom,gpio-no-mux = <0>;
|
||
|
|
pinctrl-names = "cam_default", "cam_suspend";
|
||
|
|
pinctrl-0 = <&cam_sensor_mclk1_active &cam_csi1_sensor_active>;
|
||
|
|
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||
|
|
&cam_csi1_sensor_suspend>;
|
||
|
|
gpios = <&tlmm 14 0>,
|
||
|
|
<&tlmm 104 0>,
|
||
|
|
<&tlmm 98 0>;
|
||
|
|
qcom,gpio-reset = <1>;
|
||
|
|
qcom,gpio-standby = <2>;
|
||
|
|
qcom,gpio-req-tbl-num = <0 1 2>;
|
||
|
|
qcom,gpio-req-tbl-flags = <1 0 0>;
|
||
|
|
qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
|
||
|
|
"CAM_RESET1",
|
||
|
|
"CAM_STANDBY1";
|
||
|
|
qcom,sensor-position = <0>;
|
||
|
|
qcom,sensor-mode = <0>;
|
||
|
|
qcom,cci-master = <0>;
|
||
|
|
status = "ok";
|
||
|
|
clocks = <&clock_mmss clk_mclk1_clk_src>,
|
||
|
|
<&clock_mmss clk_camss_mclk1_clk>;
|
||
|
|
clock-names = "cam_src_clk", "cam_clk";
|
||
|
|
};
|
||
|
|
|
||
|
|
qcom,camera@2 {
|
||
|
|
cell-index = <2>;
|
||
|
|
compatible = "qcom,camera";
|
||
|
|
reg = <0x02>;
|
||
|
|
qcom,csiphy-sd-index = <2>;
|
||
|
|
qcom,csid-sd-index = <2>;
|
||
|
|
qcom,mount-angle = <0>;
|
||
|
|
qcom,eeprom-src = <&eeprom1>;
|
||
|
|
qcom,actuator-src = <&actuator1>;
|
||
|
|
/* Cameras powered by PMIC: */
|
||
|
|
cam_vdig-supply = <&vph_pwr_vreg>;
|
||
|
|
cam_vio-supply = <&pm8994_lvs1>;
|
||
|
|
cam_vana-supply = <&pm8994_l29>;
|
||
|
|
/* Self-powered cameras: */
|
||
|
|
/* cam_vio-supply = <&vph_pwr_vreg>; */
|
||
|
|
/* cam_vana-supply = <&vph_pwr_vreg>; */
|
||
|
|
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
|
||
|
|
qcom,cam-vreg-min-voltage = <1000000 0 2800000>;
|
||
|
|
qcom,cam-vreg-max-voltage = <1000000 0 2800000>;
|
||
|
|
qcom,cam-vreg-op-mode = <105000 0 80000>;
|
||
|
|
qcom,gpio-no-mux = <0>;
|
||
|
|
pinctrl-names = "cam_default", "cam_suspend";
|
||
|
|
pinctrl-0 = <&cam_sensor_mclk2_active &cam_csi2_sensor_active>;
|
||
|
|
pinctrl-1 = <&cam_sensor_mclk2_suspend
|
||
|
|
&cam_csi2_sensor_suspend>;
|
||
|
|
gpios = <&tlmm 15 0>,
|
||
|
|
<&tlmm 23 0>,
|
||
|
|
<&tlmm 133 0>;
|
||
|
|
qcom,gpio-reset = <1>;
|
||
|
|
qcom,gpio-standby = <2>;
|
||
|
|
qcom,gpio-req-tbl-num = <0 1 2>;
|
||
|
|
qcom,gpio-req-tbl-flags = <1 0 0>;
|
||
|
|
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
|
||
|
|
"CAM_RESET2",
|
||
|
|
"CAM_STANDBY2";
|
||
|
|
qcom,sensor-position = <1>;
|
||
|
|
qcom,sensor-mode = <0>;
|
||
|
|
qcom,cci-master = <1>;
|
||
|
|
status = "ok";
|
||
|
|
clocks = <&clock_mmss clk_mclk2_clk_src>,
|
||
|
|
<&clock_mmss clk_camss_mclk2_clk>;
|
||
|
|
clock-names = "cam_src_clk", "cam_clk";
|
||
|
|
};
|
||
|
|
};
|